Certification Service Agreement Service Certification Agreement This Certification grantee under iISO17065 accreditation responsibilities Service Agreement was written frthe countires/dmainsthat MiCOM Labs can issue compliance status -USA (FCC), Canada (ISEJapan(MIC) and European certificates Union. and Ceification holder/
Introduction to cover the ScpefService General Requirements of the following four certification schemes as operated yMi COM Agreement covers the requirements This Service Labs Certification;
cuntry USA Federal Communications
(FCC) Canada Canada ISED Japan MIC (Ministry Com1issin Europe European Body Commission Recognition of Internal Afirsand Communicatin) Designatin TCB FCB RCB NB 1.The certification holder/grantee acknowledges and agrees tthefollowing;-
Identification N US0159 US0159 R210 NB 2280
(a)always fulfills the ceification requirements, including implementing appropriate changes when they are communicated by MiCOM Labs;
(b)ensures the product under the certification product met, that the Certification for which a Certificate 1s issued always fulfils scheme and that all ongingproduction and agrees that if the conditions will not be valid and will be revoked;
the pductcompliance requirements the to fulfill continues under which the Certification requirements of the ceified was issued are not product
(c)makes all necessary arrangements for:
1)the conduct dcumentation certification
(if required). and recrds,and access to the relevant of the evaluation and surveillance hIderI grantee's subcontractors;
of cmplaints;
ofbservers. if applicable;
3)the participation 2)investigation including provision for examining areapersonnel, and equ1pmelocation certification consistent with the scpeof certification;
certification its product regarding in such a manner as to bring MiCOM Labs into disrepute certification that MiCOM Labs may consider and does not or misleading
(d)makes claims regarding
(e)does ntuse its product statement make any unauthorized;
upnsuspension, use of all adveising certification withdrawal, or termination of certification, matter that contains any reference thereto scheme (e.g. theturnof certification documents) discontinues the ce1fication by the and takes action as required measures;
and takes any other required holder I grantee its
(g)if the certification shall be reproduced grantee in their entirety holder/
provides copiesfthe ceification documents to others, the documents or as specified in the certification scheme, Pel of7 c,c#.SicgeC eca 3nScriceAi:1reerrErlRev1.4 MiCOM Labs. 575 Boulder
(925) 462 0304 Fax925) CA 94566 Court, Pleasanton. 462-03CR, Tel: +1 Web: w w.micomlabs.com Certification Service Agreement
(h)in making reference advertising, by the certificatinscheme;
to its product certification grantee complies in cmmurncatron the certification holder/
with the requirements of MiCOM Labs or as specified media such as documents, brochures or
(i)complies with any requirements that may be prescribed marks of conformity, requirements, and on informatron related and that conformity marks are only on specific to the product;
in the cerficatinscheme relating to the use of found to comply with the products U)keeps a record makes these recrdsavailable to MiCOM Labs when requested, of all complaints made known to it relating to compliance and. with ceificatron requirements and 1)takes appropriate action with respect aectcompliance with the requirements for certificatron. to such complaints and any deficiencies found in products that 2)documents the actions taken. 2.MiCOM Labs will issue Certification holder I grantee wrth any of the requirements certification. its ability The certification to conform will inform MiCOM Labs, without under the certrfication scheme. that is valid for the specified equipment as it is presented delayfchanges at the time of that may affect smeexamples mdifications;
gain, antenna circuitry, Product antenna matching power I EIRP);
Changes to; the Legal, of this may be, but are rn no way limited to the following Changes in the chassis type, shielding material, material, chassis mdification of transmissions lines, gasket methodology I materral, changes ng frequency, grounding
, to transmission line transmit bandwidth, usage, operati change of product operating duty cycle, commercral, organizational status;
contact address and production srtes. Such modifications product certificat ion and changes ttheproduct shall require additional approval in the form of a review and amendment to the original certrfication records including the ceificate 3.MiCOM Labs shall exercise the control as specified by the certrfication of licenses, certificates, and any other mechanisms for indicating a product marks fconformity, scheme overwnership, use and display rs certified. references Incorrect any other mechanism with by suitable action to the certification scheme, a product standards is certified, for indicating by MiCOM Labs and/or the appropriate or mrsleading use of licenses, found in documentation or other publicit certific!ltes, y, shall be dealt marks, or regulatory authority. 4.Confident cnfidential
-MiCOM Labs will hold all forms and dcumentsthat make up the certificatinapplication any informatinto third pareswithutwritten from the applicant. and will not release consent iality Ps 2ot7 cc#.Siocie c,s,<ca<ico S>c,lce Agee, 1-"1 men! Rev MiCOM Labs, 575 Boulde, Court, Pleasanton. CA 94566 Tel 925)462 0304, Fax925)46203C6, Webw.micomlabs.com Service Certification Agreement General Terms and Conditions:
of the certification all of the required must be provided documentation application is made available to MiCOM in its entirety. Technical and accuracy of the application and all documentation provided for documentation
(corrected forms;
I additional attestation 60 days of the request. letters, Failure application to provide etc) shall be delivered this timeframe within may result to MiCOM within in dismissal or may of the certification application DCUMENTATION liable required for the quality will not begin until for evaluation of the application Documentation evaluation Labs. to be fully Applicant agrees purposes. certification Requests for additional exhibits, the requested incur the full fee. ElectrnicSignatures MiCOM Labs, Inc. uses an event driven signatu agreemenUacknowledgement information, documentation on application application technical esmay be used on an as needed basis at key stages cloud based system to manage certification electronic Client programs. of as a record process and cetification in the cetification details. I acknowledge ir, their and agree to the above terms and conditions entirety. Date:
2022/05/23 Signature:
Name:
Junhua Yin Title:
Manager Company:
Emdoor Information Co.,Ltd. Page ,ol 7 dSingle Certification Seniice Agreement Rev 1.4 MiCOM Labs, 575 Boulder Court, Pleasanto1, CA 94566 Tel 925)462-0304, Fax 925)462-0306, Web: www.micomlabs.com Certification Service Agreement Annex A -FCC Certificat ion Scheme The following requirements apply for FCC in addition to the General Requirements. A1) Confidentiality-
MiCOM Labs will hIdall forms and documents condential and will not release any information to third parties without written that make up the certification application cnsentfrom the applicant. Under the FCC certification FCC regulatory scheme MiCOM Labs is required web site in order to issue certification to upload product application information to the and product(s) to be listed in the FCC website. A2) The certificat1nholder I grantee are required least one year after the last surveillance post-market testing at any time, by either requested, production m acerdancewith the current MiCOM Labs rthe FCC. to make provision date and may be required to thave'production'
submit samples available for at samples for of the equipment be FCC requirements. These samples may A3) All conditions in this Service Agreement FCC requirements. In case of conflict the latest FCC requirements will take precedence are based on current over this agreement. US Federal The following Communications cmmission documents WILLEpublically availablenthe FCC web site after certification is granted:
Test Reports (RF, EMC, SAHACetc . ) External product photos. Internal product photos. Cover letters
(confidentialityquests, etc) User manua/(s) Label drawings and label placement drawings Tel: +1 (925) 462-0304, MiCOM Labs 575 Bou der Cot CA 94516 rt, Pleasanto1, Fax925)4620306Web: www.micomlabs.com PaqF of7 re#Sing EC wicc Sec>ce Ag<eaR1.4 Annex B -
Canada ISED FCB Certification Scheme The following addition to the General requirements Requirements. apply frCanada ISED (Innovation, Science and Economic Development Canada) in 81)Condentiality
-MiCOM Labs will hold all forms and documents and will not release any information to third paieswithout that make up the certification consent applicatin from the applicant. written cnfidential Under the Canada ISED ce1fication information the ISED REL (Radio Equipment to the Canada ISED regulatoweb List) website. scheme MiCOM Labs is required to upload product i applicat n site in order to issue ceifrcation and products to be listed in hIderI grantee 82)The ceificat1on least one year after the last production post-market testing surveillance These samples may be requested,
,n accrdancewith the current at any time, by either Government MiCOM Labs; or Canada !SEO. are required to make provision date and may be required to have 'production to submit samples of the equipment of Canada ISED requirements. available for at for samples 83)All conditions in this Service Agreement are based on current Canada JSED requirements. the latest ISED requirements will take precedence over this agreement In casefconflict 84)Currently, none of the documents provided to Government of Canada ISED are made available to the public should note that items may be subject to disclosure under the provisions of "Access t
(Hweverclients Information Act") informatinwill be publically on the GvernmentfCanada !SEO web site. viewable The follwingproduct Certificate Holder, name and address and contact information Operating equencyrange of the certified product Transmit power (and I or EIRP I field strength) of the certified product Applicable RSS Standard Emission designation Product technical details requested in MiCOM Labs Canada /SEO Certification Application form# RSP-100 Pae Certifca Dec#. Sine in Sef\l ce Aweement Rev 1.4 Tel: +1 (925) 462 0304, Fax925)462 030R, Web:
CA 94516 Pleasanton, www.micomlabs.com MiCOM Labs 575 Boulde, Court, Annex C -
Europe Notified Body Certification Scheme The following requirements apply for Europe in addition to the General Requirements. C1) Use the CE mark only on specific products that have been found to comply with the requirements. C2) Apply a mark to each product, Directives. the applicable product packaging, and information accompanying each product, as required by C3) The manufacturer with the technical has been placed on the market. shall keep a copy of the EU-type at the disposal documentation examination certificate, of the national authont1es its annexes for 10 years after the apparatus and add1t1ons together 2014/30/EU EMC Directive Reference;
The manufacturer of all modifications examination ce1ficate of this Directive the essential requirements or the in the form of an addition approval require shall inform the notified additional to the approved cnditions type that may affect for validity EU-type to the original body that holds the technical Annex Ill Section 7 & RED Directive 2014/53/EU documentation the conformity Annex Ill Section relating 7 to the EU-type of that cetificate. examinatincertificate. with of the apparatus Such modifications shall 2014/30/EU EMC Directive Reference;
MiCOM Labs Certification thereto any additions its notifying authority restricted. shall inform Annex Ill Sectin8 & RED Directive its notifying authority cncerningthe EUtypeexamination Annex Ill Section 8 certificates make available and/or to or upon request, 2014/53/EU which it has issued or withdrawn, the list of such certificates and/or periodically refused thereto any additions and shall, suspendedor otherwise MiCOM Labs Certificatinshall inform the other NotiedBodies concerning thereto which 1t has refused, suspendedrotherwise the EU typeexamination certificates and, upon restricted, and/or any additions request, concerning such certificates and/or additions which it has issued. withdrawn, thereto thereto MiCOM Labs Certification additions Official Journal Commission and/or additions of the European thereto. documentatinand the results shall inform in those cases where harmnisedstandards the referencesfwhich have been published the Member States of EU-type certificates examination it has issued and/or Union have not been applied or not been fully applied. btaina cpyof the EU-type may obtain in the the The Member States, ceificates examination a copy of the technical and the other Notified Bodies maynrequest On request, the Member States and the Commission Body. out by the Notified of the examinations carried MiCOM Labs Certification well as the technical equipment has been assessed shall keep a copyfthe EU-type file including the documentation submitted or until the expiry of the validity of that ceificate. examination cecate, by the manufacturer for 10 years after the rad1 its annexes and additions, as EMC Directive Reference;
Where, in the course of the monitoring an apparatus shall suspend nlongercomplies, the certificate 2014/30/EU or withdraw it shall require if necessa Article 32, RED Directive 2014/53/EU of conformity the issue of a certificate, following Article 34 the manufacturer a Notified to take appropriate corrective Body finds that and measures Where corrective or withdraw suspend any certificates, as appropriate. measures are not taken or do not have the required effect, the Notified Body shall restrict, All conditions the latest requirements will take precedence over this agreement. in this Se iceAgreement are based on current European and MRA requirements. In case of conflict PaqA (,of7 Dec#. Si e cn srSceAg,eameot Re, 14 MiCOM Labs, 575 Bou rler Court, CA 94566 Pleasanton, Tel: +1 (925) 462 034,Fax: +1 (925) 462 0306Web:www.micomlabs.com Certification Service Agreement Annex D -Japanese MIC RCB Certification Scheme The following the General requirements Requirements. apply for Japanese MIC (Ministry of Internal Affairs and Communications) in addition to D1) Applicant antenna hereby declares system in the applying that the structure of the high frequency and modulation part of the radio, except device is designed not to be tampered with or modified by the end user. D2) Ap_1:licant agrees to allow disclosurefApplication, M1COM Labs, upon demand, tTheMinistry to asMICby M iCOM Labs Inc as a RecgnizedCertified exempt from all Non-Disclsureagreements. of Internal Documents and Test Report, A1rsand Communications, Certificates issued by Japan-herein referred Body. Documents disclosed to MIC will be D3) All conditions the latest conflict in this Service Agreement are based on current Japanese and MRA requirements. In case of requirements will take precedence over this agreement The following granted:
dcumentsWILL BE publically available on the Japan MIC web site after certification is that includes but is not limited to the following information;
Test report(
s) External product phots Internal product photos Certificate fCompliance Approval Holder name and address details Applicable Japan Standard(s) Operating frequency range of the certified product Transmit power of the certified product Emission designators PaF7 of7 Ccr# Singe Certificali Seosce AgcemRet1.4 MiCOM Labs, 575 Bou der Court, Pleasanloo CA 94566 1(925) 462 0304, Fax925)462-0306, Web: w, w.miconbs.ccm