Technical Analysis FCC Warning Statement technology. If no motion is detected, battery, it can be awakened a 18000mAh the camera will enter sleep mode 6000 times by detecting the when the sun is full, at a time and is charged by solar energy, low-power if the camera contains charged, and solar power About batteries This camera adopts advanced After being fully human movement. replenished Tips:
If the camera is woken up frequently will be consumed 500 times. Charging quickly. If it works for 15 seconds power can be used for 300 wake-ups per hour. If we charge the camera once a week, the life span of the battery more than 9 years or detects the camera regularly the movements is recommended. of human body for many times, the power of the camera for in the camera can be charged The battery can extend The recommended temperatures. rises. temperature operating At -4F(-20"C), temperature the battery of the camera is 14F-122F(-1 O"C-50"C). may drain in short time, or even may not charge. performance may drop at low as the It will work normally Battery Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC Radiation Exposure Statement The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be colocated for operating in conjunction with any other antenna or transmitter. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1)This device may not cause harmful interference, and
(2)This device must accept any interference received, including interference that may cause undesired operation.