iCtrl X1 USER MANUAL Introduction iCtrl X1 system is designed to improve the quality of life of our customers. If you have any opinions or suggestions about our products, please kindly log in www.iCtrl.hk to send your feedback. You may refer to the latest information published on our website. Product compatibility Demand for smart device:
a) iOS 8.0 or higher virson b) Andriod 4.4 or higher virson Quick Start Guide Carefully read all instructions before use, so that you can use this product correctly. Please keep this quick start guide for future reference. Step 1 Download App Searching iCtrl X1 in Apple store or Google play or visit www.ictrl.hk. A v a i l a b l e o n t h e iCtrl X1 Step 2: Turn on the Bluetooth Android device & iOS device:
Enter Settings and turn on Bluetooth. Step 3: Operating the App Tap the icon to select devices and operate. 1 Control Once the device is connected, the app will enter the next screen. The devices recently connected will be shown here The nearby devices available for connection will be shown here Editable Introduction Single motor Dual motor Dual motor Triple motor Memory button. 1 When the memory position is set, the button background will turn white. When the device is in the memory position, the button background will turn blue. 2 Button functions Disconnect the link. Setting . Back. Refresh/Reconnecting. Pause. Memory button. Head up Head down Open Close Lumbar up Lumbar down Home Instructions Memory position 1. When you want to memorize a position, press or button;
2.Select a button to memorize the position;
3.Select an icon and edit a name;
4.Position memorized. 3 Setting device picture and edit a name 1. Press for setting;
2. Edit and select a picture;
3. Setting completed. 4 FAQ
. Unable to connect the device:
A.If you cannot connect the device after the first installation, please restart the handheld device. B.iCtrl X1 disconnects during operation and is unable to reconnect. 1. Check whether the device is connected with other handheld devices. 2. Restart iCtrl software. 3. Restart Bluetooth (Turn off Bluetooth and wait for 10 seconds until restart). 4. Restart the device. 5. Restart the handheld device. Memory position errors:
A. If power supply is cut off while the device is operating, there will be an error in memory positioning. B.The device works too frequently. When it returns to memory position, the position appears as an error. Solution: Tap and hold the Down button in iCtrl X1 App until movement stops, and then the error will be resolved. C. No memory position function is available:
While turning on the Memory position, the device will stop running after working for some time without returning to "Memory position". Solution: Please check whether Device control box and Actuator / motor are properly connected (It is suggested to be done by professionals.). Sudden power failure:
When power supply is cut off under proper connection of the handheld terminal and device, it is necessary to go through the following operation for reconnecting:
A: Turn off iCtrl X1 software completely. B: Select Phone Settings Bluetooth Off. C: Wait 10 seconds, then restart the device and iCtrl X1 software. Then it will resume normal operation. Specifications Power input Power output Rated power 100V~240V 29V 2A 58W Bluetooth version 4.0 5
,,
,,, iCtrl X1 iCtrl iCtrlwww.iCtrl.hk a) iOS 8.0 (
iPhone 4 ) b) Andriod 4.4 applestroeiCtrl googleplayiCtrl A v a i l a b l e o n t h e iCtrl X1 iCtrl 6
+
+
(4) 1 7 1. 2. 3. 4. 8 1. 2. 3. 9 A B iCtrl X1 1. 2.iCtrl X1 3.10 4. 5. A B iCtrl X1 C A: iCtrl X1 B:
C: 10siCtrl X1 100V~240V 29V 2A 58W 4.0+EDR 2 eMoMo 10 eMoMo US-SERVICE@emomotech.com EU-SERVICE@emomotech.com AUS-SERVICE@emomotech.com ASIA-SERVICE@emomotech.com Tel+86 755 27643116 Fax: +86 755 27643115 11 EMOMO TECHNOLOGY CO.,LTD FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. To assure continued compliance, any changes or modifications not expressly approved by the party. Responsible for compliance could void the users authority to operate this equipment. (Example- use only shielded interface cables when connecting to computer or peripheral devices). This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.