FCC ID: LCGVU113 BTLE Display

SD02530P/00/EN/01.20 71469325 2020-06-30 Products Solutions Services Special Documentation VU113 Bluetooth display Remote operation via Bluetooth wireless technology Declaration of Conformity VU113 Bluetooth display 1 Declaration of Conformity 2 A0041924 Endress+Hauser VU113 Bluetooth display About this document Remote operation of devices via Bluetooth wireless technology 2 About this document 2.1 Symbols Tip Indicates additional information. 2.2 Documentation 2.2.1 Designated use Suitable for the following device versions Device: Cerabar PMC51B Device: Cerabar PMP51B Device: Cerabar PMC71B Device: Cerabar PMP71B Device: Deltabar PMD55B Device: Deltabar PMD75B Device: Deltabar PMD78B Firmware version: 01.00.zz or higher Device version: 1 Incorrect use The manufacturer is not liable for damage caused by improper or non-designated use. Under different operating conditions than those described here, protection may be compromised and the correct functioning of the device cannot be guaranteed. 2.3 Registered trademarks Bluetooth The Bluetooth word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by Endress+Hauser is under license. Other trademarks and trade names are those of their respective owners. Apple Apple, the Apple logo, iPhone, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Android Android, Google Play and the Google Play logo are trademarks of Google Inc. Endress+Hauser 3 Radio approvals VU113 Bluetooth display 3 Radio approvals 3.1 Europe This device meets the requirements of the Telecommunications Directive RED 2014/53/EU:

EN 300 328 V2.1.1 EN 301 489-1 V2.1.1 EN 301 489-17 V3.1.1 EN 62311: 2008 3.2 Canada and United States 3.2.1 English This device complies with Part 15 of the FCC Rules and with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:

This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation. Changes or modifications made to this equipment not expressly approved by Endress+Hauser SE+Co. KG may void the FCC authorization to operate this equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. 3.2.2 Franais Le prsent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exempts de licence. 4 Endress+Hauser VU113 Bluetooth display Operation options L'exploitation est autorise aux deux conditions suivantes :

L'appareil ne doit pas produire de brouillage, et L'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. Les changements ou modifications apports cet appareil non expressment approuvs par Endress+Hauser SE+Co. KG peuvent annuler l'autorisation FCC d'utiliser cet appareil. Japan 3.3 Japanese Radio Law and Japanese Telecommunications Business Law Compliance. This device is granted pursuant to the Japanese Radio Law () and the Japanese Telecommunications Business Law (). This device should not be modified (otherwise the granted designation number will become invalid). 3.4 Mexico IFETEL notice La operacin de este equipo est sujeta a las siguientes dos condiciones:

(1) es posible que este equipo o dispositivo no cause interferencia perjudicial

(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada Other countries 3.5 Other national approvals are available on request. 4 Operation options 4.1 Access via Bluetooth wireless technology 1 Remote operation via Bluetooth wireless technology 1 2 Smartphone or tablet with SmartBlue (App) Display with optional Bluetooth function Endress+Hauser A0041912 5 1 2 Commissioning VU113 Bluetooth display Preparatory steps 4.2 The serial number of the device serves as the initial password when the connection is established for the first time. The serial number can be found on the nameplate. A0039981 1 Nameplate 4.3 Technical data Maximum free-field range 50 m (165 ft) Operation radius with intervisibility 10 m (33 ft) around the device Supply voltage: 3.2 VDC with max. 3.4 VDC and min. 3.1 VDC Power consumption: max. 17 mW Current consumption: 5 mA Pollution degree: 2 Temperature range: 40 to +85 C (40 to +185 F) Relative humidity: operation up to 100% in the measuring devices Do not open in a condensing environment!

Suitable for wet environments, integrated in measuring devices 4.3.1 Operating altitude As per IEC 61010-1 Ed.3:

Up to 3 000 m (9 800 ft) above sea level Can be extended to 5 000 m (16 400 ft) above sea level if overvoltage protection (OVP) is used 5 Commissioning 5.1 Requirements Device requirements Commissioning via SmartBlue is only possible if a VU113 Bluetooth display is installed. 6 Endress+Hauser 1 VU113 Bluetooth display Commissioning System requirements SmartBlue is available as a download from the Google Play Store for Android devices and from the iTunes Store for iOS devices iOS devices: iPhone 4S or higher from iOS9.0; iPad2 or higher from iOS9.0; iPod Touch 5th Generation or higher from iOS9.0 Devices with Android: from Android 4.4 KitKat and Bluetooth 4.0 Initial password The serial number of the device (on the nameplate) serves as the initial password when the connection is established for the first time. If the main electronics module of the device is a spare part, the initial password is the ID number of the Bluetooth display. The ID number is located on the rear of the display beside the Bluetooth logo. Please note the following:

If the Bluetooth display is removed from one device and installed in another device. All the log-in data are only saved in the Bluetooth display and not in the device The password changed by the user is also saved in the Bluetooth display The Bluetooth and/or background lighting function can depend on the supply voltage to the device. For details on the supply voltage range, see the Operating Instructions for the entire device. 5.2 SmartBlue app 1. Scan the QR code or enter "SmartBlue" in the search field of the App Store. A0039186 2. 3. 4. 2 Download link Start SmartBlue. Select device from livelist displayed. Enter the login data:

User name: admin 5. Tap the icons for more information. Password: Serial number of the device or ID number of the Bluetooth display After logging in for the first time, change the password!

Endress+Hauser 7

*71469325*

71469325 www.addresses.endress.com

Label location VU113 1 Housing front 1/6 2 Housing back 2/6 3 Label (6) The label is a sticker with the content printed on it. The print is wiping resistant. 4 Label (7) 3/6 5 VU113 mounted in field device Text on field device label:

Contains FCC ID: LCGVU113 Contains IC: 2519A-VU113 4/6 5/6 6/6

Long/Short-term Confidentiality Request Date: 11 March 2020 PHOENIX TESTLAB GmbH Product Certification Knigswinkel 10 D 32825 Blomberg FCC ID:

LCGVU113 To Whom it may concerns, Pursuant to sections 0.457(d) and 0.459 of CFR 47 and to avoid premature release of sensitive information prior to marketing or release of the product to the public, we hereby requests long-term confidential treatment of information accompanying this application as outlined below:

Schematics Block Diagram Operational Description Parts List Tune-Up Info In addition we hereby request the following exhibits contained in this application to be temporarily (short-term confidentilality) withheld from the public disclosure for an initial period of days not applicable until:

External Photos Internal Photos Test Setup Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these matters might be harmful to the applicant and provide unjustified benefits to its competitors. The applicant understands that pursuant to rule 0.457(d), disclosure of this application and all accompanying documentation will not be made before the date of the GRANT for this application. If you have any questions, please feel free to contact me. Yours sincerely, in the name of Endress+Hauser, Tim Knig Graduated Approval Engineer

Endress+Hauser (2) People for Process Automation PHOENIX TESTLAB GmbH Product Certification Department Koenigswinkel 10 32825 Blomberg, Germany Power of Attorney To Whom It May Concern:

Please be advised that we, Endress+Hauser SE+Co. KG, authorize the following persons from PHOENIX TESTLAB GmbH:

e Tim K6nig e Anton Stang to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters in following countries:

USA (FCC) & CANADA (ISED) PHOENIX TESTLAB GmbH has our permission to use our technical documents for the approvals for the following device:

Product description: BTLE Display FCC ID: LCGVU113 IC: 2519A-VU113 HVIN: VU113 PMN: VU113 FVIN: S132 - Ver. 6.1.1 Unless future correspondence from Endress and Hauser GmbH and Co, please extend your full cooperation to PHOENIX TESTLAB GmbH regarding matters to the above mentioned products to 12 months after the signatory date of this authorization. Contact person Ralf Reimelt Position inthe company Group Leader R&D Date of signatory 17.02.2020 Q f (y MA Signatory

(signature of the applicant) 1/1