FCC ID: 2AZJ5-EMCN001 ELT Node with Bluetooth

Flanders Node/Dock/Sensor User Guide Product overview:

Node is an emergency lamp upgrade and transformation of the product, through the addition of this product, you can achieve intelligent detection of the state of emergency lights, simplify the transformation of the manual inspection of emergency lights before the complicated process, improve work efficiency, save labor costs. Features:

BLE group network Remote control and detection Accurate ambient light detection Accurate emergency light battery level detection RTC timing Antennas extend to enhance coverage The phone can be manipulated Wide AC voltage input for more use conditions Technical parameters:

Logo :

Brand: EMC Company: Concord ElectronicHuizhouLtd & Country Mate Technology Ltd BLE IC: EFR32BG21A020F768IM32_B Model: Flanders Node/Dock/Sensor Bluetooth: This Class A digital device complies Using local: For Indoor use only Operating temperature : -10 -60 AC OUT Load : 85-277VAC@60HZ 10A AC parameters:

AC Input: 85-277 VAC s 60HZ, 10A AC output: 85-277 VAC s 60HZ, 10A AC output airborne current: Imax is 25mA RF power: 20dBm Light sensor parameters:

Output: IIC number Supply voltage: 3.3V Current of work: Imax=1mA Voltage sensor parameters:

Output: IIC number Supply voltage: 3.3V Detection range: -32VDC-32VDC Current of work: Imax s 5mA Dock parameters:

Output: IIC number Supply voltage: 3.3V Current: Imax s 10mA Details:

Node Dock Sensor Accessory line 1 Accessory line 2 Accessory line 3 ANT 1. Node Explain in detail The 4 Jack are functionally consistent and can be connected to Sensor or Dock via Accessory Line 2. Note: The Dock can only be followed by one, Sensor with up to three, and the interface is common. The 2pin jack can only insert accessory line 3, accessory line 3 connected to the fire lamp inside the battery positive and negative pole. Note: Red- positive pole, black- negative pole. The RF jack can be connected to the antenna or to the Dock via accessory line 1. d. LED a. 4pin Jack4pcs b. 2pin jack1pcs c. RF jack RGBStatus indication. e. Button Reset SW f. Hole Return to factory settings buttons (hidden button). g. AC power lines Black: AC input LIVE White: NEUTRUAL (Common part) Red: AC output Load Green: Earth 2. Dock Connect to Node via accessory line 1; (refer to Node's c) b. RF out jack a. RF input jack Connect to ANT c. 4Pin jack Connect to Node via accessory line 2; (refer to Node's a) d. LED RGB LED , when Node is powered on and Dock connect with Node, Status indication. 3. System Architecture Connect Sensor Connect Dock Connect 2Pin jack Connect RF jack 4. Install the tutorial https://www.??????.com/ ( 6 ) Features:

FCC Through the BLE network, the automation to detect the state of emergency lights, including the ambient brightness, internal battery power, time and so on. FCCID: 2AZJ5-EMCN001 Compliance with Standards This device complies with FCC Rules Part 15 and with Industry Canada license exempt RSS standard(s). Operation is subject to two conditions:

(1) This device may not cause harmful interference

(2) This device must accept any interference that may be received or that may cause undesired operation. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autoriseaux deux conditions suivantes :

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le f onctionnement. NOTE: This equipment has been tested and found to comply with the limits f or a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmf ul interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interf erence will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the f ollowing measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. NOTE: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the users authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

NODE Label: 47.5x34.5mm Material: PET, Black characters on white background 47.5mm ELT Node Model no.: EMC-N001 FCC ID: 2AZJ5-EMCN001 Indoor Use Only Input : 85-277V AC 4A 60Hz Output: 85-277V AC 4A 60Hz FCC statement:

This device complies with Part 15 ofthe FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Designed in Minnesota Made in Malaysia 28mm 10mm 8RTHWJML52 34.5mm Cool Gray 5C Barcode label size28x10mm Material: PET, Black characters on white background Code Type: 128 code S1 S2 S3 Cool Gray 5C

Energy Management Collaborative, LLC Date: May 25, 2021 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 RE: Energy Management Collaborative, LLC FCC ID: 2AZJ5-EMCNO01 FCC Certification Confidentiality Request Gentlemen:

This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. Energy Management Collaborative, LLC requests that the following documents regarding this submission for FCC ID : 2AZJS-EMCNO01 be kept Long-Term confidential:

Exhibit Type File Name Block Diagram Block Diagram.pdf Schematics Schematics.pdf Operational Description Operational Description.pdf And below exhibit kept short-term confidential (180 days):

Exhibit Type File Name External Photos External Photo.pdf Internal Photos Internal Photo.pdf Test Setup Photos Test Setup Photos.pdf Users Manuals Users Manual.pdf Those documents contain detailed system and equipment description and related information about the product which Energy Management Collaborative, LLC considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, Energy Management Collaborative, LLC considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market. Thank you for your attention to this matter. Yours Sincerely, Print nam Title: M Energy gement Collaborative, LLC

Energy Management Collaborative, LLC Date: May 25, 2021 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The Energy Management Collaborative, LLC, the undersigned, hereby authorizes Mr. Wu Xuewen from Shenzhen BALUN Technology Co., Ltd., to act on the behalf of the Nubia Technology Co., Ltd. solely in matters relating to the application for an FCC equipment authorization for FCC ID: 2AZJ5-EMCNO01 including the signing of documents in connection with this Application. Necessary acts carried out by Shenzhen BALUN Technology Co., Ltd. in connection with the Application shall have the same effect as acts of the Nubia Technology Co., Ltd. The Energy Management Collaborative, LLC also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-

Drug Abuse Act of 1988, 21 U.S.C. Section 862. Yours Sincerely, Printn Title:

Energy lWanagement Collaborative, LLC e: Bn Wright