|
app
s
|
Applicant Information
|
|
|
1 2 3
|
Effective |
2023-06-15
|
|
1 2 3
|
Applicant's complete, legal business name |
ENLI INCORPORATION
|
|
1 2 3
|
FCC Registration Number (FRN) |
0029638590
|
|
1 2 3
|
Physical Address |
4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist.
|
|
1 2 3
|
4F., No. 42, Aly. 5, Ln. 12, Sec. 3
|
|
1 2 3
|
TAIPEI, N/A
|
|
1 2 3
|
Taiwan
|
|
|
app
s
|
TCB Information
|
|
1 2 3
|
TCB Application Email Address |
c******@nacsemc.com
|
|
1 2 3
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
|
app
s
|
FCC ID
|
|
1 2 3
|
Grantee Code |
2AWKZ
|
|
1 2 3
|
Equipment Product Code |
QCNFA364AH
|
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
|
1 2 3
|
Name |
M******** F********
|
|
1 2 3
|
Telephone Number |
88624********
|
|
1 2 3
|
Fax Number |
88622********
|
|
1 2 3
|
E-mail |
m******@enlii.com
|
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
|
app
s
|
Confidentiality (long or short term)
|
| 1 2 3 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes |
| 1 2 3 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 11/21/2023 |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
| 1 2 3 |
Is this application for software defined/cognitive radio authorization? | No |
| 1 2 3 | Equipment Class | DSS - Part 15 Spread Spectrum Transmitter |
| 1 2 3 | DTS - Digital Transmission System |
| 1 2 3 | NII - Unlicensed National Information Infrastructure TX |
| 1 2 3 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11a/b/g/n/ac + BT 4.1 M.2 2230 Type Card |
| 1 2 3 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No |
| 1 2 3 | Modular Equipment Type | Single Modular Approval |
| 1 2 3 | Purpose / Application is for | Change in Identification |
| 1 2 3 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
| 1 2 3 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
| 1 2 3 | Grant Comments | Class II Permissive change to increase the minimum RF separation distance to 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR value was < 0.1 W/Kg. The highest reported SAR value across all filings under this equipment code and FCC ID was <0.1 W/Kg. |
| 1 2 3 | Class II Permissive change to increase the minimum RF separation distance to 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This device supports 20 and 40MHz bandwidths for 2.4 GHz. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. The antennas used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.79 W/kg and 0.82 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.79 W/Kg and 0.82 W/Kg respectively. |
| 1 2 3 | Class II Permissive change to adjust power on channel 159 using the minimum RF separation distance of 0.5cm and reduced power as described in this filing. Output power listed is maximum combined conducted. This device supports 20, 40, and 80 MHz bandwidths. This module may be installed only by the OEM or an OEM integrator. This transmitter has been approved for use in mobile RF exposure category configurations with the antenna(s) installed to provide a separation distance of at least 20 cm from all persons. Installation in portable devices is limited to the display section of a laptop or tablet or apply to those under keyboard where the antennas used during SAR testing (or equivalent antennas) are installed to provide at least 0.5cm distance from the base of the device and with an antenna-to-antenna separation distance of at least 3cm. This device supports client-only operating modes in the 5150-5350 MHz and 5470-5725 MHz bands. The antenna(s) used for this transmitter must not be collocated or operating in conjunction with any other antenna or transmitter within a host device, except in accordance with FCC multi-transmitter product procedures. Grantee must provide installation and operating instructions for complying with FCC multi-transmitter product procedures. Grantee must coordinate with OEM integrators to determine applicable host configurations to ensure RF exposure compliance, including simultaneous transmission. The highest reported SAR for body and simultaneous transmission conditions are 0.79 W/kg and 0.82 W/kg respectively. The highest reported SAR values for body and simultaneous exposure conditions across all filings under this equipment code and FCC ID are 0.79 W/Kg and 0.82 W/Kg respectively. |
| 1 2 3 | Is there an equipment authorization waiver associated with this application? | No |
| 1 2 3 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
|
app
s
|
Test Firm Name and Contact Information
|
|
1 2 3
|
Firm Name |
Bureau Veritas CPS(H.K.) Ltd., Taoyuan Branch
|
|
1 2 3
|
Name |
E******** L****
|
|
1 2 3
|
Telephone Number |
+886-********
|
|
1 2 3
|
Fax Number |
+886-********
|
|
1 2 3
|
E-mail |
e******@bureauveritas.com
|
|