FCC ID: 2AWKZ-QCNFA765 NIDApad

M o b i l e M e d i c a l A s s i s t a n t O N Y X - M D 1 1 6 S e r i e s ONYX-MD116E 11.6 LCD with LED Backlight Intel Elkhart Lake processor Dual smart card readers for multiple-care workflow Mobile Medical Assistant MD116E Manual 1st Ed August 2023 M o b i l e M e d i c a l A s s i s t a n t O N Y X - M D 1 1 6 S e r i e s Copyright Notice This document is copyrighted, 2023. All rights are reserved. The original manufacturer reserves the right to make improvements to the products described in this manual at any time without notice. No part of this manual may be reproduced, copied, translated, or transmitted in any form or by any means without the prior written permission of the original manufacturer. Information provided in this manual is intended to be accurate and reliable. However, the original manufacturer assumes no responsibility for its use, nor for any infringements upon the rights of third parties, which may result from its use. The material in this document is for product information only and is subject to change without notice. While reasonable efforts have been made in the preparation of this document to assure its accuracy, ONYX Healthcare Inc., assumes no liabilities resulting from errors or omissions in this document, or from the use of the information contained herein ONYX Healthcare Inc. reserves the right to make changes in the product design without notice to its users M o b i l e M e d i c a l A s s i s t a n t O N Y X - M D 1 1 6 S e r i e s Acknowledgments Intel Pentium is registered trademarks of Intel Corporation. Microsoft Windows is a registered trademark of Microsoft Corporation. All other product names or trademarks are properties of their r espective owners. M o b i l e M e d i c a l A s s i s t a n t O N Y X - M D 1 1 6 S e r i e s Packing List Before you begin installing your Mobile Medical Assistant, please make sure that the following items have been shipped:

MD116E Mobile Medical Assistant M o b i l e M e d i c a l A s s i s t a n t O N Y X - M D 1 1 6 S e r i e s If any of these items are missing or damaged, you should contact your distributor or sales representative immediately. Headquarters Onyx Healthcare Inc. 4F, No.135, Lane 235, Pao-Chiao Rd., Hsin-Tien City, Taipei 231, Taiwan, R.O.C. TEL: +886-2-8919-2188 FAX: +886-2-8919-1699 E-mail: sales@onyx-healthcare.com http://www.onyx-healthcare.com Worldwide Offices:

Onyx Healthcare Inc. 2F., No.135, Ln. 235, Baoqiao Rd., Xindian Dist., New Taipei City 231, Taiwan (R.O.C.) TEL: +886-2-8919-2188 FAX: +886-2-8919-1699 E-mail: sales@onyx-healthcare.com http://www.onyx-healthcare.com Worldwide Offices:

Onyx Healthcare, USA Inc. 324W. Blueridge Ave., Orange,, CA 92865, USA Tel : +1-714-792-0774 Fax: +1-714-792-0481 M o b i l e M e d i c a l A s s i s t a n t O N Y X - M D 1 1 6 S e r i e s Email: usasales@onyx-healthcare.com Onyx Healthcare EUROPE B.V. Primulalaan 42, 5582 GL Waalre, Netherlands Tel : +31-(0)499-745600 Email: eusales@onyx-healthcare.com Onyx Healthcare (Shanghai) INC. 20F, unit D, GEM Building, No. 487 Tianlin Road, Shanghai, China Tel: +86-021-64956588 Fax: +86-021-64956889 Email: cnsales@onyx-healthcare.com M o b i l e M e d i c a l A s s i s t a n t O N Y X - M D 1 1 6 S e r i e s Safety & Warranty 1. Read these safety instructions carefully. 2. Keep this user's manual for later reference. 3. Disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth. 4. For pluggable equipment, the power outlet must be installed near the equipment and must be easily accessible. 5. Keep this equipment away from humidity. 6. Put this equipment on a reliable surface during installation. Dropping it or letting it fall could cause damage. 7. The openings on the enclosure are for air convection. Protect the equipment from overheating. DO NOT COVER THE OPENINGS. 8. Make sure the voltage of the power source is correct before connecting the equipment to the power outlet. 9. Warning: To avoid risk of electric shock, this equipment must only be connected to a supply mains with protective earth. (Avertissement: Pour viter tout risque de choc lectrique, cet appareil doit tre connect une alimentation secteur avec une prise de terre) 10. Position the power cord so that people cannot step on it. Do not place anything over the power cord. 11. All cautions and warnings on the equipment should be noted. M o b i l e M e d i c a l A s s i s t a n t O N Y X - M D 1 1 6 S e r i e s 12. If the equipment is not used for a long time, disconnect it from the power source to avoid damage by transient over-voltage. 13. Never pour any liquid into an opening. This could cause fire or electrical shock. 14. Never open the equipment. For safety reasons, only qualified service personnel should open the equipment. 15. Warning: Do not modify this equipment without authorization of the manufacturer. (Avertissement: Ne pas modifier cet quipement sans l'autorisation du fabricant) 16. Warning : It is necessary for checking or replacing the battery pack every year. (Avertissement: Il est ncessaire de vrifier ou de remplacer la batterie chaque anne) 17. When the tablet is under heavy loading, the battery may stop charging due to overheating. When this behavior happens, turn off the tablet before charging. M o b i l e M e d i c a l A s s i s t a n t O N Y X - M D 1 1 6 S e r i e s 16. If any of the following situations arises, get the equipment checked by service personnel:

a. The power cord or plug is damaged. b. Liquid has penetrated into the equipment. c. The equipment has been exposed to moisture. d. The equipment does not work well, or you cannot get it to work according to the users manual. e. The equipment has been dropped and damaged. f. The equipment has obvious signs of breakage. 17. DO NOT LEAVE THIS EQUIPMENT IN AN UNCONTROLLED ENVIRONMENT WHERE THE STORAGE TEMPERATURE IS BELOW -20 C (-4F) OR ABOVE 60 C (140 F). IT MAY DAMAGE THE EQUIPMENT. 18. External equipment intended for connection to signal input/output or other connectors, shall comply with relevant UL / IEC standard (e.g. UL 1950 for IT equipment and ANSI/AAMI ES 60601-1: 2005 AND CAN/CSA-C22.2 No. 60601-1:08 / IEC 60601 series for systems shall comply with the standard IEC 60601-1-1, Safety requirements for medical electrical systems. Equipment not complying with UL 60601-1 shall be kept outside the patient environment, as defined in the standard. Caution:

It may cause the danger of explosion if battery is incorrectly replaced. Replace only with same or equivalent type recommended by the manufacturer. M o b i l e M e d i c a l A s s i s t a n t O N Y X - M D 1 1 6 S e r i e s Classification 1. Degree of production against electric shock: not classified 2. Degree of protection against the ingress of water: IPX0 3. Mode of operation: Continuous 4. Type of protection against electric shock: Class I equipment 5. No Applied Part, No AP/APG Intended Use The MD116/MD116I is intended to serve as a computer for integration with hospital systems. MD116/MD116I is designed for general purpose medical computing with built-in CPU, memory, storage, thermal solution, enclosure in the hospital environment, for data collection and for displaying information. The machine and power supply must not be used outdoors or in areas where an explosion hazard may occur. The user has to make sure the requirements from IEC 60601-1 are fulfilled, especially in combination from this machine with other electrical equipment. And it shall not be used for life supporting system. The latest version of this user manual is available for download from https://www.onyx-healthcare.com/service_en_3.php M o b i l e M e d i c a l A s s i s t a n t O N Y X - M D 1 1 6 S e r i e s FCC M o b i l e M e d i c a l A s s i s t a n t O N Y X - M D 1 1 6 S e r i e s UL Module Description Tablet PC, ONYX-MD116 module is developed to suitable for the Classification Mark requirement M o b i l e M e d i c a l A s s i s t a n t O N Y X - M D 1 1 6 S e r i e s Safety Symbol Description The following safety symbols are the further explanations for your reference. MEDICAL GENERAL MEDICAL EQUIPMENT AS TO ELECTRICAL SHOCK, FIRE AND MECHANICAL HAZARDS ONLY IN ACCORDANCE WITH ANSI/AAMI ES 60601-1 (2005) + AMD

(2012) and CAN/CSA-C22.2 No. 6060-1

(2014). Attention, consult ACCOMPANYING DOCUMENTS. Stand-by Ground wire Protective Ground wire. M o b i l e M e d i c a l A s s i s t a n t O N Y X - M D 1 1 6 S e r i e s Contents Chapter 1 General Information 1.1 Introduction .................................................................... 1-2 1.2 Feature ............................................................................ 1-3 1.3 Specification ................................................................... 1-4 1.4 Dimension ....................................................................... 1-8 Chapter 2 Hardware Installation 2.1 Safety Precautions ......................................................... 2-2 2.2 Quick Tour of ONYX-MD116 .......................................... 2-3 2.3 Mounting 2-6 2.4 Turn On and Boot up into Windows.2-6 2.5 Turn off.2-6 2.6 connectors. 2-7 Chapter 3 Driver Installation Appendix A Miscellanea A.1 General Cleaning Tips .................................................. C-2 A.2 Cleaning Tools .............................................................. C-3 A.3 Scrap Computer Recycling ........................................ C-5 A.3 MD116/Battery LED ...................................................... C-6 M o b i l e M e d i c a l A s s i s t a n t O N Y X - M D 1 1 6 S e r i e s Chapter General Information S l i m M e d i c a l P a n e l P C O N Y X - M D 1 1 6 S e r i e s 1.1 Introduction MD116E Mobile Medical Assistant is based on Intel processor, which delivers a performance improvement of more than 100 percent compared to systems running traditional single-core processors. With four cores computing engines, MD116E can simultaneously execute four computing tasks. It accommodates one M.2 2280 Interface SATA /NVME SSD and one DDR4 SODIMM up to 32GB. The high brightness LCD, zero noise solution, integrated multimedia functions make them the perfect platform upon which to build comprehensive lifestyle computing applications. ONYX-MD116E includes all the features of a powerful computer into a slim and attractive chassis. It has a 11.6 600 nits TFT display with 1920 x 1080 resolution. ONYX-MD116E owns Dual smart card reader to support ID check. Combining ONYX-MD116E into your system can achieve both cost-saving and efficient improvements in common medical applications. ONYX-MD116E is your perfect choice. ONYX-MD116E was regarded as Medical Device Data Systems

(MDDS). It is a hardware product that transfer, store, convert formats, and display medical device data. MDDS are not intended to be used for active patient monitoring. Chapter 1 General Information 1-2 S l i m M e d i c a l P a n e l P C O N Y X - M D 1 1 6 S e r i e s 1.2 Feature Intel Elkhart Lake N6415 Quad Core Processor Supports One DDR4L SODIMM up to 32GB Dual hot-swappable batteries for 24/7 operation ORION client compatible Chapter 1 General Information 1-3 S l i m M e d i c a l P a n e l P C O N Y X - M D 1 1 6 S e r i e s 1.3 Specification Hardware Specifications Processor Intel Pentium Elkhart LakeN6415(6.5W) 1.20 GHz System Memory DDR4L SO-DIMM x1, Default 4 GB (Up to 32 GB) OS Support Microsoft Windows 10/ Microsoft Windows 11/Linux Ubuntu M.2 Interface x1, 128/256/512GB/1TB(Optional) Storage Wireless Communication 802.11 a/b/g/n/ac/ac + BT5.2 (Optional Installation) Camera 2 MP (Front) / 5 MP (Rear) Touchscreen Gorilla Glass 3 Digital Accelerometer Ambient Light Sensor WE.2533020201601 AMS.TSL25721FN LTE+GPS Sierra 7455(Optional) /EM7421 (Optional) Function Keys x2 LED Indicators x2 USB USB 3.0 x 2 (Type-C / Type-A) Ethernet Gigabit LAN x1 Chapter 1 General Information 1-4 S l i m M e d i c a l P a n e l P C O N Y X - M D 1 1 6 S e r i e s DC-In DC-In Jack x1 Docking Docking Connector x1 Battery Type Polymer Battery Capacity 4545 mAh x2 Battery Run Time MD116 Approx. 6 hrs / MD116I Approx.4 hrs Speaker 2W x2 LCD Specifications Model MOHOTEC Display Type 11.6 LCD (AUO base) Max. Resolution 1920 x 1080 Contrast Ratio 800:1 Luminance (cd/m2) 600TYP Back Light Life Time >50,000 Hrs Note:

All ONYX LCD products are manufactured with High precision technology. However, there are a small number of defective pixels in all LCD panels that are not able to change color. This is a normal occurrence for all LCD displays from all manufacturers and should not be noticeable or objectionable under normal operation. All LCD panels are qualified for industry standard conditions in the following: total 7 dead pixels on a screen or if there are 3 within 1 inch square area of each other on the display. Chapter 1 General Information 1-5 S l i m M e d i c a l P a n e l P C O N Y X - M D 1 1 6 S e r i e s Mechanical Specifications Architecture Close-frame Color Dark Gray Mounting / Holder VESA 75 Screw type:M4*8mm Construction 3mm ABS + PC TYPE Plastic housing Rear cover magnesium Dimension (WxHxD) 312 (W) x 239 (H) x 37 (D) mm Net Weight Approx. 1.8 kg Power Supply Specifications Model Adapter FSP096-AHAN3 Input Voltage 100-240V AC @ 50-60 Hz Output Voltage 12V, 8A, 96W max. Model Adapter EM11011H Input Voltage 100-240V AC @ 50-60 Hz Output Voltage 12V, 10A, 120W max. Chapter 1 General Information 1-6 S l i m M e d i c a l P a n e l P C O N Y X - M D 1 1 6 S e r i e s Environmental Specifications Operating Temperature MD116E: 0C ~ 40C (32F ~ 104F) Operating Humidity 30% to 75% RH, non-condensing Operating Pressure 700 to 1060 hPa Storage Temperature

-20C ~ 60C (-4F ~ 140F) Storage Humidity 10%~95%@35C, non-condensing Storage Pressure 700 to 1060 hPa Vibration Shock 0.5G / 5 ~ 500Hz (Random) / operation 20G peak acceleration (11 msec. duration) /

operation Drop(with packaging) 80 cm (1 Corner, 3 Edge, 6 Surface) EMI / Safety CE/FCC Class B, UL60601-1, EN60601-1, E1, EN1789(compliance) Touch Screen Type Interface Projective Capacitive / 5-wire Resistive USB interface Light Transmission

> 80%

Chapter 1 General Information 1-7 S l i m M e d i c a l P a n e l P C O N Y X - M D 1 1 6 S e r i e s 1.4 Dimension Chapter 1 General Information 1-8 S l i m M e d i c a l P a n e l P C O N Y X - M D 1 1 6 S e r i e s Chapter Hardware Installation Chapter 2 Hardware Installation 2-1 S l i m M e d i c a l P a n e l P C O N Y X - M D 1 1 6 S e r i e s 2.1 Safety Precautions Always completely disconnect the power cord from your board whenever you are working on it. Do not make connections while the power is on, because a sudden rush of power can damage sensitive electronic components. Always ground yourself to remove any static charge before touching the board. Modern electronic devices are very sensitive to static electric charges. Use a grounding wrist strap at all times. Place all electronic components on a static-dissipative surface or in a static-shielded bag when they are not in the chassis Chapter3 Award BIOS Setup 3-1 S l i m M e d i c a l P a n e l P C O N Y X - M D 1 1 6 S e r i e s 2.2 Quick Tour of ONYX-MD116/MD116I Before you start to set up MD116E take a moment to become familiar with the locations and purposes of the controls, drives, connections and ports, which are illustrated in the figures below. When you place MD116E upright on the desktop, its front panel appears as shown in Picture 2-1. Picture 2.1: Front View of MD116 Series When you turn the Mobile Medical Assistant around and look at its Chapter3 Award BIOS Setup 3-2 S l i m M e d i c a l P a n e l P C O N Y X - M D 1 1 6 S e r i e s rear cover, the I/O port in left and right side, as shown in Picture 2-2.

(The I/O section includes various I/O ports, including a DC-IN Jack, 1 Ethernet ports, 2 USB ports.). Top side have 2 smart card reader. Picture 2.2 Rear view of MD116 Series IO Port Chapter3 Award BIOS Setup 3-3 S l i m M e d i c a l P a n e l P C O N Y X - M D 1 1 6 S e r i e s 2.4 Turn On and Boot up into Windows OS This section is for Windows operating system only. If you are installing a different operating system, please contact your vendor for installation details. Your MD116E will begin loading Windows OS once you push the power button to turn power on. After less than one minute, Windows desktop screen will appear. You can select the programs from the start menu in the left-down corner of the desktop screen. When turn on unit and the electrical quantity of battery is high, the LED Indicators will be bright green. When turn on unit and the electrical quantity of battery is low, the LED Indicators will be bright orange. When the battery cannot be detected and connected with adapter, the LED Indicators will be bright blue. 2.5 Turn off Turning off MD116E properly is important for system reliability. There are two ways to turn off the system. 1. On the start menu, click shut down and select OK 2. Push the power button and then the system will shut down automatically 2.6 Connectors Chapter3 Award BIOS Setup 3-4 S l i m M e d i c a l P a n e l P C O N Y X - M D 1 1 6 S e r i e s 1. USB 3.0 These 9 Universal Serial Bus (USB) ports are available for connecting USB 3.0 devices. 2. LAN (RJ-45) port. This port allows Gigabit connection Chapter3 Award BIOS Setup 3-5 S l i m M e d i c a l P a n e l P C O N Y X - M D 1 1 6 S e r i e s Chapter Driver Installation Chapter3 Driver Installation 3-1 S l i m M e d i c a l P a n e l P C O N Y X - M D 1 1 6 S e r i e s There are several installation ways depending on the driver package under different Operating Systems. Please follow the sequence below to install the drivers:

For Windows 10/11:

Step 1 Chipset Driver Step 2 Graphics Driver Step 3 SIO Driver Step 4 TXE Driver Step 5 Audio Driver Step 6 BT Driver Step 7 GPS Driver Step 8 Ethernet on Docking Driver Step 9 LAN Driver Step 10 SMART CARD READER Driver Chapter 4 Drivers Installation 3-2 S l i m M e d i c a l P a n e l P C O N Y X - M D 1 1 6 S e r i e s Appendix Miscellanea Appendix A Miscellanea A-1 A.1 General Cleaning Tips You may need the following precautions before you begin to clean the computer. When you clean any single part or component for the computer, please read and understand the details below fully. 1. Never spray or squirt the liquids directly onto any computer component. If you need to clean the device, please rub it with a piece of dry cloth. 2. Be cautious of the tiny removable components when you use a vacuum cleaner to absorb the dirt on the floor. 3. Turn the system off before you start to clean up the component or computer. 4. Never drop the components inside the computer or get circuit board damp or wet. 5. Be cautious of all kinds of cleaning solvents or chemicals when you use it for the sake of cleaning. Some individuals may be allergic to the ingredients. 6. Try not to put any food, drink or cigarette around the computer. 7. ONYX Healthcare Inc. has tested and verified these cleaning disinfectants, CIDEX, Viraguard, Control III Disinfectant Germicide, Caviwipes, Dispatch Disinfectant Cleaner CLH69101, Puregreen 24 Disinfectant, can be used with MD116E. Use of any other disinfectants will void the warranty. A.2 Cleaning tools Although many companies have created products to help improve the process of cleaning your computer and peripherals users can also use household items to clean their computers and peripherals. Below is a listing of items you may need or want to use while cleaning your computer or computer peripherals. Keep in mind that some components in your computer may only be able to be cleaned using a product designed for cleaning that component, if this is the case it will be mentioned in the cleaning tips. Cloth - A piece of cloth is the best tool to use when rubbing up a component. Although paper towels or tissues can be used on most hardware as well, we still recommend you to rub it with a piece of cloth. Water or rubbing alcohol You may moisten a piece of cloth a bit with some water or rubbing alcohol and rub it on the computer. Unknown solvents may be harmful to the plastics parts. Vacuum cleaner - Absorb the dust, dirt, hair, cigarette particles, and other particles out of a computer can be one of the best methods of cleaning a computer. Over time these items can restrict the airflow in a computer and cause circuitry to corrode. Cotton swabs - Cotton swaps moistened with rubbing alcohol or water are excellent tools for wiping hard to reach areas in your keyboard, mouse, and other locations. Foam swabs - Whenever possible it is better to use lint free swabs such as foam swabs. Note:

We strongly recommended that you should shut down the system before you start to clean any single components. Please follow the steps below. 1. Close all application programs. 2. Close operating software. 3. Turn off power switch 4. Remove all device 5. Pull out power cable A.3 Scrap Computer Recycling If the computer equipments need the maintenance or are beyond repair, we strongly recommended that you should inform us as soon as possible for the suitable solution. For the computers that are no longer useful or work well, please contact with worldwide distributors for recycling. The worldwide distributors show on the following website:

https://www.onyx-healthcare.com/contact_en.php Note:

Follow the national requirement to dispose unit A.4 MD116E Battery LED identification Default LED Charging LED 1 Power on Power OFF Suspend Yes No Yes No Yes No On, Flashing On On, Flashing Off On, Flashing On Battery Status Capacity % LED 1 Color Charging 0-1%

Cyan 1-20%

Orange-Red 21-95%

Yellow 96~100% Green Discharging

<7%

Orange-Red ,Flashing cannot Boot 7-10%

Orange-Red 11-30%

Yellow 31-100%

Green Only AC-IN NA Cyan Status Steady Push Button Battery Capacity 10%

LED Display 1 LED Flashing 20%

30%

40%

50%

60%

70%

80%

90%

= 100%

1 LED ON 1 LED ON 1 LED Flashing 2 LED ON 2 LED ON 1 LED Flashing 3 LED ON 3 LED ON 1 LED Flashing 4 LED ON 4 LED ON 1 LED Flashing 5 LED ON A.5 FCC Statement:

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. These requirements set a SAR limit of 1.6 Wkg averaged over one gram of tissue. The highest SAR value reported under this standard during product certification is 0.769 Wkg. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems.

ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist., Taipei Taiwan 10559 Tel: 88624498311 ; Fax: 886225792506 Authority to Act as Agent Date: 15 November 2023 Timco Engineering, Inc. 849 NW State Road 45 Newberry, FL 32669 To Whom It May Concern:

I appoint T V Rheinland Taiwan Ltd., Ivan Hsieh to act as our agent in the preparation of this application for equipment certification. I certify that submitted documents properly describe the device or system for which equipment certification is sought. I also certify that each unit manufactured, imported or marketed, as defined in the FCC or Industry Canadas regulations will have affixed to it a label identical to that submitted for approval with this application. For instances where our authorized agent signs the application for certification on our behalf, I acknowledge that all responsibility for complying with the terms and conditions for Certification, as specified by TUV Rheinland Group, still resides with : ENLI INCORPORATION./ 4F., No.42, Aly.5, Ln.12, Sec.3, Bade Rd., Songshan Dist. TAIPEI, 10559, Taiwan For TCB applications, We certify that we are not subject to denial of federal benefits, that includes FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. 862. Further, no party, as defined in 47 CFR 1.2002 (b), to the application is subject to denial of federal benefits, that includes FCC benefits. Thank you, Agency Agreement Date:

2023/11/15 Agreement is valid for 12 months from the above date. By:

(Signature) Max Fan

(Print name) N/A

(Title)Product Manager 88624498311

(Telephone) On behalf of:

ENLI INCORPORATION.

(Company Name) Page 1 of 1

U.S. Agent for Service of Process Attestation To the attention of Federal Communications Commission Authorization and Evaluation Division U.S. Agent Company Name:AOCE Corporation Inc. FRN: 0033401381 Contact Name:Johnson Wang Street Address:6547 N Academy Bivd #2266 City/Province/Zip:Springs, COLORADO,80918 Telephone No:346 582 5234 Email:wwbj2008@126.com This letter is to confirm that we have accepted the responsibility to act as the designated U.S. Agent for service of process as required by 2.911(d)(7) on behalf of the Applicant noted below. U.S. Agent Signature:

Date: 2023-10-19 Signed by : Johnson Wang Applicant ENLI INCORPORATION FRN: 0029638590 FCC ID: 2AWKZ-QCNFA765 Service Type: Change ID Modular Approval Type: Single Modular Approval Host Marketing Name/Brand Name: NA Host Model Number: NA Contact Name: Max Fan 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist. TAIPEI 10559,Taiwan Tel: +886-24498311 Ext: 168 Email: maxfan@enlii.com This letter is to confirm that the Applicant has designated the U.S Agent noted above for the purpose of accepting service of process on their behalf as required by 2.911(d)(7). The Applicant further acknowledges acceptance to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment. Applicant Signature:

Date: 2023-10-19 Signed by : Max Fan

ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist., Taipei Taiwan 10559 Tel: 88624498311 ; Fax: 886225792506 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 11/14/2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2AWKZ-QCNFA765 ENLI INCORPORATION. (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicant signature) Max Fan Rev 1/26/2023 Page 1 ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist., Taipei Taiwan 10559 Tel: 88624498311 ; Fax: 886225792506 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 11/14/2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2AWKZ-QCNFA765 ENLI INCORPORATION. (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List (as a specifically named entity or any of its subsidiaries or affiliates) as an entity producing covered equipment. Sincerely,

(Applicant signature) Max Fan Rev 1/26/2023 Page 2

ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist., Taipei Taiwan 10559 Tel: 88624498311 ; Fax: 886225792506 Permissive change letter Date: 2023/11/15 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 Subject: C2PC for FCC. Accommodate a pre-certificate module into host device. We, ENLI INCORPORATION, is herein submitting permissive change filing for the following changes. 1. Accommodate the Pre-certificated Module (FCC ID: 2AWKZ-QCNFA765) into the Mobile Medical Assistant (Model: NIDApad). Sincerely, By

(Signature) Max Fan

(Print Name)

TCB FCC Request for Confidentiality Letter Number: MS-0044715 Revision:

1 Effective date: Sep 12, 2022 Author:

Owner:

William Graff William Graff ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist., Taipei Taiwan 10559 Tel: 88624498311 ; Fax: 886225792506 Date: 11/16/2023 Federal Communications Commission Equipment Authorization Branch 7435 Oakland Mills Road, Columbia, MD 21046, USA Subject: Confidentiality Request for FCC ID: 2AWKZ-QCNFA765 Pursuant to FCC 47 CRF 0.457(d), the applicant requests that a part of the subject FCC/IC application be held confidential. Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent n/a Permanent Permanent Permanent Permanent Permanent Permanent Permanent Exhibit Block Diagrams External Photo Internal Photos ***

Operation Description/Theory of Operation Schematics Test Setup***

Tune-Up Procedure Users Manual***

Part List ENLI INCORPORATION. has spent substantial effort in developing this product and it is one of the first of its kind in industry. Having the subject information easily available to "competition" would negate the advantage they have achieved by developing this product. Not protecting the details of the design will result in financial hardship. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public.

(*** Exceptional case for Permanent Confidentiality for these Exhibits by PAG only) Short-Term Confidentiality:

The applicant requests the exhibits selected above as short term confidential be withheld from public view for a period of specify number of days not to exceed 180 days from the date of the Grant of Equipment Authorization and prior to marketing. This is to avoid premature release of sensitive information prior to marketing or release of the product to the public. Applicant is also aware that they are responsible to notify TUV Rheinland in the event information regarding the product or the product is made available to the public. TUV Rheinland will then release the documents listed above for public disclosure pursuant to FCC Public Notice DA 04-1705. Sincerely, By:

___________________/Product Manager_____________ Max Fan

(Signature/Title)

(Print name) Tel: 88624498311 Email: maxfan@enlii.com MS-0044715 Page 1 of 1 Revision 1

ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist., Taipei Taiwan 10559 Tel: 88624498311 ; Fax: 886225792506 We, ENLI INCORPORATION, attest that this device under FCC ID 2AWKZ-QCNFA765 complies with device protocol requirements and operational restrictions. This devices transmit power spectral density is in accordance with the rules for low power indoor access points. Indoor Access Point (6CD):

Protocol attestation statement:

a. Contention-based protocol, as demonstrated in the test report, is permanently embedded in the chip (ITE8528) and is not host dependent. b. An 11ax IEEE APs Transmit Power Envelope element has information fields for power limits for connecting client/subordinate devices. The TPE information is embedded in this devices signals and used to tell the connecting clients/subordinate that the max TX powers it is allowed to transmit. There is a regulatory info field in this devices beacon and probe response frames which details this device type when the client/subordinate associates to this device. Statement acknowledging device restrictions:

a. Low-power indoor Access Point. Access Point operating in the 5.925-

7.125 GHz band shall be supplied power from a wired connection, has an integrated antenna, is not battery-powered, and does not have a weatherized enclosure. b. This device's operation will not be allowed on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Indoor access points are prohibited for control of or communications with unmanned aircraft systems, including drones. c. Sign:

Max Fan 88624498311 maxfan@enlii.com

256GB.F/R-Camera. smartcardpatery2) |v: Il [NINN UIII FSP(FSP096-AHAN3) H12345678 Input:100-240V~ ,1.8A,50-60Hz Output:12V=- 8A 96W Max Display Input Rating:12V = 8A YALL 0000111 111114 medDV GmbH UK Cc AIDA pad coco C Cc A MD116 N6415.11.6" PCT.16G RAM. Contains FCC ID:2AWKZ-QCNFA765 This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

Rudolf-Diesel-StraBe 10-12 35463 Fernwald Germany http: /iwww.meddv.de Made in Taiwan For indoor use only.

Applicant/Grantee FCC ID:

ENLI INCORPORATION. 2AWKZ-QCNFA765 X Request for Modular Approval Request for Limited Modular Approval Section 15.212 Modular Transmitters /

Requirements Device Conditions Comply (Y/N) Single Modular Approval Requirements The radio elements must have the radio frequency circuitry must be shielded. Physical/discrete and tuning capacitors may be located external to the shield, but must be on the module assembly. The module shall have buffered modulation/data input(s) (if such inputs are provided) to ensure that the module will comply with the requirements set out in the applicable FCC standard under conditions of excessive data rates or over-modulation. The module shall have its own power supply regulation on the module. This is to ensure that the module will comply with the requirements set out in the applicable standard regardless of the design of the power supplying circuitry in the host device which houses the module. Requirements set out in the applicable standard regardless of the design of the power supplying circuitry in the host device which houses the module. The module shall comply with the provisions for external power amplifiers and antennas detailed in this standard. The Equipment certification submission shall contain a detailed description of the configuration of all antennas that will be used with the module. The module shall be tested for compliance with the applicable standard in a stand-

alone configuration, i.e. the module must not be inside another device during testing. The module has its own RF shielding. Shield Can is employed on the board structure, please see exhibition External Photo, the emission measurement was conducted without further shielding added. All modulation and data input(s) are buffered. The EUT has buffered data inputs, it is integrated on the RF chip Output power is controlled by the RF Chip and de-coupled from supply voltage variations. Frequencies are determined by Crystal The antenna is part of the module The modular transmitter was tested in a stand-alone configuration via a UART Interface. The module shall comply with the Category I equipment labelling requirements. In the exhibition OEM manual, there are Instructions given to the OEM on how to label the end product. 1 2 3 4 5 6 Y Y Y Y Y Y The modular transmitter complies with all specific rules or operating requirements that ordinarily apply to a complete transmitter and the manufacturer will provide adequate instructions along with the module to explain any such requirements. A copy of these instructions is included in this application for equipment authorization:

Address compliance with the Commission's RF exposure limits in Sections 1.1310 and 2.1093. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF exposure compliance in accordance with Section 15.247(b)(4). 7 8a Instructions in User Manual Please refer the Maximum Permissible Exposure Information. Y Y A limited modular approval may be granted for single or split modular transmitters that do not comply with all of the above requirements, e.g., shielding, minimum signaling amplitude, buffered modulation/data inputs, or power supply regulation, if the manufacturer can demonstrate by alternative means in the application for equipment authorization that the modular transmitter meets all the applicable Part 15 requirements under the operating conditions in which the transmitter will be used. Limited modular approval also may be granted in those instances where compliance with RF exposure rules is demonstrated only for particular product configurations. The applicant for certification must state how control of the end product into which the module will be installed will be maintained such that full compliance of the end product is always ensured. Signature Name/Title: Max Fan Company Name: ENLI INCORPORATION. Date: 2023/11/15

ENLI INCORPORATION 4F., No. 42, Aly. 5, Ln. 12, Sec. 3, Bade Rd., Songshan Dist., Taipei Taiwan 10559 Tel: 88624498311 ; Fax: 886225792506 Date: 2023-11-14 Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Rd Columbia MD 21046 FCC ID: 2AWKZ-QCNFA765 To Whom it may concern, This letter is to statement that Mobile Medical Assistant (Model: NIDApad) Host has been tested according to FCC Part 15B by DEKRA (Test Report No.: 2370540R-0E3012110014-A). And the SDOC file, meeting the requirements of the FCC regulations, would been provided when the device is sold by the responsible party in US. The service will not be sold until the SDOC is provided. If the sale does not have an SDOC, all responsibility is the responsibility of the applicant. Applicant: ENLI INCORPORATION. Address: 4F., No.42, Aly.5, Ln.12, Sec.3, Bade Rd., Songshan Dist. TAIPEI, 10559, Taiwan Signature:

Name: Max Fan Tel: 88624498311 Email: maxfan@enlii.com