IEM-DIGITAL Professional Digital Stereo/Dual Mono In-Ear Monitor o w n e r
'
s m a n u a l Table of Contents FCC Information ...................................................... 4 Safety Instructions ................................................... 5 Welcome ............................................................... 6 Listening for a Lifetime ............................................. 7 Getting Started ....................................................... 8 Features ................................................................ 9 Getting Connected ................................................. 10 Descriptions and Functions ..................................... 13 FCC Information 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT!: This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Vocopro may void your authority, granted by the FCC, to use this product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable(s) supplied with this product MUST be used. Follow all installation instructions. Failure to follow instructions could void your FCC authorization to use this product in the U.S.A. 3. NOTE: This product has been tested and found to comply with the requirements listed in FCC Regulations, Part 15 for Class "B" digital devices. Compliance with these requirements provides a reasonable level of assurances that your use of this product in a residential environment will not result in harmful interference with other electronic devices. This equipment generates/uses radio frequencies and, if not installed and used according to the instructions found in the owner's manual, may cause interference harmful to the operation of other electronic devices. Compliance with FCC regulations does not guarantee that interference will not occur in all installations. If this product is found to be the source of interference, which can be determined by turning the unit "Off" and "On", please try to eliminate the problem by using one of the following measures:
Relocate either this product or the device that is being affected by the interference. Use power outlets that are on different branch (circuit breaker or fuse) circuits or install AC line filter(s). In the case of radio or TV interference, relocate/reorient the antenna. If the antenna lead-in is 300-ohm ribbon lead, change the lead-in to coaxial type cable. If these corrective measures do not produce satisfactory results, please contact your local retailer authorized to distribute Vocopro products. If you can not locate the appropriate retailer, please contact Vocopro, 1728 Curtiss Court, La Verne, CA 91750. CAUTION The apparatus is not disconnected from the AC power source so long as it is connected to the wall outlet, even if the apparatus itself is turned off. To fully ensure that the apparatus is indeed fully void of residual power, leave unit disconnected from the AC outlet for at least fifteen seconds. CAUTION:
READ THIS BEFORE OPERATING YOUR UNIT 1. To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2. Install your unit in a cool, dry, clean place - away from windows, heat sources, and too much vibration, dust, moisture or cold. Avoid sources of hum (transformers, v motors). To prevent fire or electrical shock, do not expose to rain and water. 3. Do not operate the unit upside-down. 4. Never open the cabinet. If a foreign object drops into the set, contact your dealer. 5. Place the unit in a location with adequate air circulation. Do not interfere with its proper ventilation;
this will cause the internal temperature to rise and may result in a failure. 6. Do not use force on switches, knobs or cords. When moving the unit, first turn the unit off. Then gently disconnect the power plug and the cords connecting to other equipment. Never pull the cord itself. 7. Do not attempt to clean the unit with chemical solvents:
this might damage the finish. Use a clean, dry cloth. 8. Be sure to read the "Troubleshooting" section on common operating errors before concluding that your unit is faulty. 9. This unit consumes a fair amount of power even when the power switch is turned off. We recommend that you unplug the power cord from the wall outlet if the unit is not going to be used for a long time. This will save electricity and help prevent fire hazards. To disconnect the cord, pull it out by grasping the plug. Never pull the cord itself. 10. To prevent lightning damage, pull out the power cord and remove the antenna cable during an electrical storm. 11. The general digital signals may interfere with other equipment such as tuners or receivers. Move the system farther away from such equipment if interference is observed. NOTE:
Please check the copyright laws in your country before recording from records, compact discs, radio, etc. Recording of copyrighted material may infringe copyright laws. Voltage Selector (General Model Only) Be sure to position the voltage selector to match the voltage of your local power lines before installing the unit. 110V 4 Safety Instructions CAUTION RISK OF SHOCK CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Only refer servicing to qualified service personnel. Explanation of Graphical Symbols The lightning flash & arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of danger. The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and servicing instructions. WARNING To reduce the risk of fire or electric shock, do not expose this unit to rain or moisture. 8. Ventilation - The appliance should be situated so its location does not interfere with its proper ventilation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation slots. 9. Heat - The appliance should be situated away from heat sources such as radiators, heat registers, stoves, or other appliances (including amplifiers) that produce heat. 10. Power Sources - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance. 11. Grounding or Polarization - Precautions should be taken so that the grounding or polarization means of an appliance is not defeated. 12. Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. Cleaning - Unplug this unit from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. 14. Power lines - An outdoor antenna should be located away from power lines. 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 15. Nonuse Periods - The power cord of the appliance should be unplugged from the outlet when left unused for a long period of time. 2. Retain Instructions - The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards. 6. Water and Moisture - Do not use this unit near water. For example, near a bathtub or in a wet basement and the like. 7. Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer. 7 A. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause an overturn. 16. Object and Liquid Entry - Care should be taken so that objects do not fall and liquids are not spilled into the enclosure through openings. 17. Damage Requiring Service - The appliance should be serviced by qualified service personnel when:
A. The power supply cord or plug has been damaged; or B. Objects have fallen into the appliance; or C. The appliance has been exposed to rain; or D. The appliance does not appear to operate normally or exhibits a marked change in performance; or E. The appliance has been dropped, or the enclosure damaged. 18. Servicing - The user should not attempt to service the appliance beyond that described in the operating instructions. All other servicing should be referred to qualified service personnel. Note:
To CATV system installer's (U.S.A.): This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected as close to the point of cable entry as practical. 5 Welcome And thank you for purchasing the IEM-Digital from VocoPro, your ultimate choice in Karaoke entertainment! With years of experience in the music entertainment business, VocoPro is a leading manufacturer of Karaoke equipment, and has been providing patrons of bars, churches, schools, clubs and individual consumers the opportunity to sound like a star with full-scale club models, in-home systems and mobile units. All our products offer solid performance and sound reliability, and to reinforce our commitment to customer satisfaction, we have customer service and technical support professionals ready to assist you with your needs. We have provided some contact information for you below. VocoPro 1728 Curtiss Court La Verne, CA 91750 Toll Free: 800-678-5348 TEL: 909-593-8893 FAX: 909-593-8890 VocoPro Company Email Directory Customer Service & General Information info@vocopro.com Tech Support techsupport@vocopro.com Remember Our Website Be sure to visit the VocoPro website www.vocopro.com for the latest information on new products, packages and promos. And while you're there don't forget to check out our Club VocoPro for Karaoke news and events, chat rooms, club directories and even a KJ Service directory!
We look forward to hearing you sound like a PRO, with VocoPro, the singers ultimate choice. Please record the model number and serial number below, for easy reference, in case of loss or theft. These numbers are located on the rear panel of the unit. Space is also provided for other relevant information FOR YOUR RECORDS Model Number Serial Number Date of Purchase Place of Purchase Listening for a Lifetime
Some common decibel ranges:
30 40 50 60 70 80
The following noises can be dangerous under constant exposure:
90 100 120 140 180
7 Getting Started Whats in the box?
IEM DIGITAL Transmitter
(x1) Power Adapter (x1) Antenna (x2) Audio Cable Body Pack Receiver (x) Body Pack Antenna (x) In-Ear Monitor ear buds (x) 8 Features 24 bit digital, dual frequency (true stereo) transmitter and receiver Operating in the 900MHZ range free of TV broadcast interference Hi and Low transmission preference can disperse across various venues Instantaneous connection and set-up with one touch IR sync Rugged all metal design for both transmitter and receiver belt pack 5V USB connection to charge the rechargeable battery in belt pack Professional ear-bud earphones included 9 Getting Connected DC IN 12-15V/500mA LOOP OUT R AUDIO IN L AUDIO IN ANT B vocopro.com MADE IN CHINA ANT A Plug in external Audio inputs Plug in DC Power Adapter to the DC-IN on the rear panel of your IEM-Digital transmitter Press Power button once Turn the volume knob of the body-pack clockwise to activate.
*Check to see if the AF/RF-L or AF/RF-R LED is lit, this means that you already have an established connection. 10 Getting Connected Conguration Suggestion Route your instrument and microphones into a mixer. Connect to a monitor or pre-out audio output connector on the back of your mixer/receiver Send the audio signal to the R/L audio input connectors on the back of the IEM Digital Check that the bodypack receiver synced in order to provide in-ear monitoring to the performers Illuminated AF/RF R and AF/RF L LED lights on the body packs will ensure that the true stereo spectrum of your audio is being received Adjust the volume knob on the body pack to your preference MONITOR MASTER OUT
(BALANCED) REC OUT UNBAL. RECORD MIC OUT ONLY (MONO) MAIN 1&2 (VIDEO 1) DC IN 12-15V/500mA LOOP OUT R AUDIO IN L AUDIO IN ANT B vocopro.com MADE IN CHINA ANT A 11 Getting Connected How to change frequency and re-sync Press menu select knob (CH should now be blinking) Rotate the knob to desired channel number setting Raise body pack IR sensor within close proximity of transmitter IR sensor Press and hold the Power/Sync button AF/RF L and or AF/RF R LEDs should illuminate ensuring a connection 12 Descriptions and Functions Transmitter Front:
1. Display -- Conveniently showcases crucial operational settings info CH -- 9 channels consisting of two output frequencies per channel Freq -- Displays the actual frequency transmissions in megahertz L/R -- Input level meter for incoming left and right audio Stereo/MX Mono -- Changes the aural conguration of the wireless output transmission 2. Menu/Select -- Turn this dial knob to cycle through available menu settings and push to select
*Press and hold this button to conveniently lock menu navigation once you have conrmed your and conrm your preference. selections. 3. IR -- This sensor communicates frequency information to the body pack receivers when re-
syncing/changing channels 4. Headphone with vol knob -- Use this connection to input a set of wired headphones and monitor the wireless audio feed being sent to the body pack receivers. 5. Master Output Vol.-- This knob adjusts the overall loudness of the audio transmission signal. 6. Power/Sync Button -- Press this button once to turn the Unit ON or press once more to turn OFF. Press and Hold this button to start the IR sync process.
*See Pg.11 for syncing assistance 1 2 3 4 5 6 13 Descriptions and Functions Transmitter Back:
1. DC IN -- Plug in the provided power adapter here.
* only use a power adapter that is rated 12-15V 500mA 2. Loop Out -- This jack allows for sending audio output to a separate audio effects processor 3. R Audio In -- Input audio here that you wish to have heard in the right channel 4. L Audio In -- Input audio here that you wish to have heard in the left channel 5. Ant A&B -- Dual diversity antennas ensure a solid wireless connection DC IN 12-15V/500mA LOOP OUT R AUDIO IN L AUDIO IN ANT B vocopro.com MADE IN CHINA ANT A 1 2 3 4 5 14 Descriptions and Functions Body Pack Receiver:
1. Antenna Terminal -- Assemble the included TNC (threaded) antenna here 2. Volume +/- OFF -- Rotate clockwise to power bodypack ON and increase audio reception volume, turn counter-clockwise to lower volume. 3. Phones -- Connect a pair of headphones or in-ear monitors here 4. IR -- Use this sensor when re-syncing the body-pack to communicate with the receiver on a different frequency channel 5. USB -- Plug a USB charging cable here to recharge the body-pack battery 123 TOP BOTTOM 4 5 15 Troubeshoot There is no audio output Ensure transmitter and receiver are synced (check body-pack AF/RF-L or AF/RF-R LED lights). Check the Battery Power Status LED on the Bodypack Receivers, if the percentage is very low it may be time to recharge. Check the power adapter on the Stationary Transmitter to ensure it is the correct adapter and that it is not faulty. Make sure the antenna is securely fastened into place. Double-check the connections between the music sources, microphones, and the IEM-DIGITAL. There is no music audio Make sure music source volume is turned up. Check the connections between the music source and the IEM-DIGITAL There is audible distortion sound Check that all volumes are not cranked up to the max Re-Sync to a different frequency transmission channel because you may be picking up outside interference. 16 FCC Warning This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any
(2) interference received, including interference that may cause undesired operation. NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help. NOTE 2: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. 17 Notes IEM-Digital Owners Manual VocoPro 2018 v1.0404 www.vocopro.com