W-03 THECONFERENCEUHF 1.FOREWORD.................................................................................2 2.INTRODUCTION...........................................................................2 3.SYSTEM FEATURES.....................................................................2 4.SYSTEM TYPE..............................................................................2 5.EIGHT CHANNEL RECEIVER FEATURES.........................................3 6.TRANSMITTER FUNCTION & FEATURES........................................4 7.TRANSMITTER BATTERY INSTALLATION........................................5 8. TRANSMITTER CONNECTION.......................................................6 9.OPERATING INSTRUCTIONS.........................................................7 10.SYSTEM CONNECTIONS.............................................................8 TheVocalArtist-UHF,ThePresenter-UHF,
TheHeadset-UHF,TheGuitarist-UHFandTheConference-UHF. 11.TROUBLE SHOOTING...................................................................9 16 12.OPTIONAL ACCESSORIES...........................................................9 13.SPECIFICATIONS......................................................................10 5 2. Wireless hand-held or body-pack microphone or conferencemicrophone....... 8 16 1 2 TheConference-UHFisaconferencingsystemthatdesignedforsharing
informationanddecisionsmadeinconferencesandmeetings. EIGHT CHANNEL RECEIVER FEATURES 8 6 7 6 7 6 7 6 7 CH5 CH1 CH6 CH2 CH7 CH3 CH8 CH4 UHF PLL EIGHT CHANNEL PROFESSIONAL WIRELESSRECEIVER 1 2 3 4 5 2 3 4 5 2 3 4 5 2 3 4 5 Front Panel UHF B ANTENNA CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN BALANCED OUTPUTS BALANCED OUTPUTS MIX OUT CH - 8 CH - 7 CH - 6 CH - 5 CH 5-8 CH 1-4 CH - 4 CH - 3 CH - 2 CH - 1 Tested to Comply With FCC Standards FOR HOME OR OFFICE USE A ANTENNA 8 9 10 10 10 10 11 11 10 10 10 10 12 8 Rear Panel 1.Power Button: Power ON/OFF the receiver. 2.Down Function Button: Sets channel data. 3."RF" signal Indicator:It glows when the Receiver receive RF signal from Transmitter. 4.LCD Information Display: Show the receiver frequency channel ect. 5.Volume Knob: Adjust the volume output of receiver. 6.Up Function Button: Sets channel data. 7."AF"Audio Level Indicator: Indicate the wireless system audio signal level. 8.Antenna. 9.Power switch of CH5-8:
When switch to "ON" position, it means CH5 to CH8 is on, all channcels from 1 to 8 is on for working. When switch to "OFF" position, it means CH5 to CH8 is off, only CH1 to CH4 is on for working. 10.XLR Balanced Output Jack: Connect the audio cable from this jack to the input port of amplifier, mixer. 11.1/4" Audio Output Jack: Connect the audio cable from this jack to the input port of amplifier, mixer.(CH1-4 or CH5-8) 12. Power Jack: Connect the AC/DC adapter to receiver. 3 3 1 6 2 4 5 1. Grille: Protects the cartridge and help reducing the breath sounds and wind noise. 2. LCD Information Display: Show the transmitter frequency channel ect. 3.Down Function Button: Sets channel data. 4.Up Function Button: Sets channel data. 5.Power and Audio Mute Switch. 6.Battery Cover: Open it to install the battery. 4 1 5 2 1. Power and Audio Mute Switch. 2. Antenna: Transmit the RF signal of transmitter. 3. Belt Clip: Attach the transmitter to the belt. 4. Audio Input Jack: it is suitable for lavalier system/headset system. 5. Low Battery Indicator: Red light glows when it is lack of power and should renew the battery. 6. LCD Information Display: Show the transmitter frequency channel ect. 7. Gain Adjusting Volume: Adjust the transmitter audio input gain. 8.State Setting Switch: Set the using state of lavalier system(L)/headset system(H)/guitar system(G) 9.Up Function Button: Sets channel data. 10.Down Function Button: Sets channel data. CONFERENCE MICROPHONE FEATURES 9 10 3 7 8 6 1 32 4 5 1. LCD Information Display: Show the transmitter frequency channel etc. 2. Up Function Button: Sets channel data. 3. Power and Audio Mute Switch. 4. Down Function Button: Sets channel data. 5. Volume Knob: Adjust the volume output of transmitter. 6. Battery Cover: Open it to install the battery. 6 4 TRANSMITTER BATTERY INSTALLATION 1. Battery Installation of Handheld Microphone: Open the battery cover, Insert the supplied batteries into battery jar in polarity and cover the battery BODYPACK TRANSMITTER CONNECTION 1. Lavalier Microphone Connection: Connect the connecter of supplied lavalier microphone to the connecting jack of transmitter (shown as below) Set the transmitter work state in wireless lavalier system(L). 2. Headset Microphone Connection: Connect the connecter of supplied headset microphone to the connecting jack of transmitter(shown as below) Set the transmitter work state in wireless headset system(H). Rotate counterclockwise to open. 3.Guitar Cable Connection: Connect the connecter of supplied guitar cable to the connecting jack of transmitter and the other connecter to guitar(shown as below), set the transmitter work state in wireless guitar system(G). 2. Battery Installation of Bodypack Transmitter or Conference Microphone:
Push open the battery cover, Insert the supplied batteries into battery jar in polarity and close the battery cover. Push down to open. Push down to open. CONFERENCE MICROPHONE CONNECTION 1.Insertthemicrophoneunitintotheconnection
holeoftheconferencingunitandtighten
clockwise.
2.LongpressthePOWERbuttontoturnonthe
conferencemicrophone,andthe lightof
microphonewillbeilluminated. 3.Select the appropriate channel with the UP button and the DOWN button 4.Short press POWER button to switch mute state
(The light of microphone is off) and normal state. 5 6 OPERATING INSTRUCTIONS 1. Receiver Operation Power on receiver, press two "UP" buttons of module 2 and 3 together for 1 second to enter the adjustment, when the LCD displays "UnLOC", it is under "Normal Operation". When the LCD displays "LOC", it is under
"Locking Operation". a. Normal Operation
-Press and hold "UP"/"DOWN" button, release the button once the CH number begins to flash
-When it is flashing, continue to press "UP"/"DOWN" button to increase
/decrease the channel orderly, select the desired channel
-The selected channel will be save automatically without any action for 5 seconds.
-Please refer to the following list for showing the adjusting channels. b. Locking Operation
-Press and hold "UP"/"DOWN" button, release the button once the CH number begins to flash
-When it is flashing, continue to press "UP"/"DOWN"button to increase
/decrease the channel orderly, select the desired channel
-Once finish the channel adjustment of any one module, the channels of other seven modules will be changed automatically without any action to select the channels under same group.
-The channels will be save automatically for using without any action for 5 seconds.
-Please refer to the following list for showing group information. 2. Transmitter Operation Power on transmitter
-Press and hold "UP"/"DOWN" button, release the button once the CH number begins to flash
-When it is flashing, continue to press "UP"/"DOWN" button to increase
/decrease channel orderly, select the same channel as chosen on receiver.
-The selected channel will be save automatically for using without any action for 5 seconds. 3. Please pay attention: If hope to use multi-microphones together with better effect (less interference), we suggest to choose 8 frequencies under same group for using. SYSTEM CONNECTION 1. Receiver Power Connection: Connect the DC connector of supplied AC/DC adapter into the DC power input of receiver. Plug the AC input connecter into an AC120/60Hz or AC220V/50Hz outlet. (Shown as below) UHF B ANTENNA CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN BALANCED OUTPUTS BALANCED OUTPUTS MIX OUT CH - 8 CH - 7 CH - 6 CH - 5 CH 5-8 CH 1-4 CH - 4 CH - 3 CH - 2 CH - 1 Tested to Comply With FCC Standards FOR HOME OR OFFICE USE A ANTENNA 2. Antenna: Keep the position of antenna at a 45 angle from vertical, .(Shown as below) UHF B ANTENNA CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Tested to Comply With FCC Standards FOR HOME OR OFFICE USE 45 BALANCED OUTPUTS BALANCED OUTPUTS MIX OUT CH - 8 CH - 7 CH - 6 CH - 5 CH 5-8 CH 1-4 CH - 4 CH - 3 CH - 2 CH - 1 A ANTENNA 3. Audio Connection: Connect the corresponding output of receiver by supplied 1/4" phone jack audio cable or your XLR cable to the input of power amplifier, mixer. UHF B ANTENNA CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN BALANCED OUTPUTS BALANCED OUTPUTS MIX OUT CH - 8 CH - 7 CH - 6 CH - 5 CH 5-8 CH 1-4 CH - 4 CH - 3 CH - 2 CH - 1 Tested to Comply With FCC Standards FOR HOME OR OFFICE USE A ANTENNA 7 8 13-15 1000mA 394MM X 205MM X 52MM X 2 7 238MM X 50MM X 50MM 250MM X 51MM X 51MM X 2 7 100MM X 65MM X 30MM CONFERENCE MICROPHONE SPECIFICATIONS X 2 7 174MM X113MM X 48.5MM(19.5*410MM) 10 523.2-597.775MHz 50 164 8 9 FCCwarningstatement ThisdevicecomplieswithPart15oftheFCCrules. Operationissubjecttothefollowingtwoconditions:
1)thisdevicemaynotcauseharmfulinterference,and 2)thisdevicemustacceptanyinterferencereceived, includinginterferencethatmaycauseundesiredoperation. Changesormodificationsnotexpresslyapprovedbythepartyresponsibleforcompliancecould voidtheuser'sauthoritytooperatetheequipment. ThedevicehasbeenevaluatedtomeetgeneralRFexposurerequirement.Thedevicecanbeused inportableexposureconditionwithoutrestriction. This device operates on anoprotection, nointerference basis. Should the user seek to obtain protectionfromotherradioservicesoperatinginthesameTVbands,aradiolicenseisrequired. Forfurtherdetails,consultInnovation,ScienceandEconomicDevelopmentCanadasdocument ClientProceduresCircularCPC2128,VoluntaryLicensingofLicenseExemptLowPowerRadio ApparatusintheTVBands.