FCC ID: PBN-EX23DT MAGICSING KARAOKE (WIRELESS MICROPHONE)

D Y N A M I C S O U N D & V I S U A L E X P E R I E N C E MAGICSING USERS MANUAL Thank you for your purchase Please read this carefully before using your MAGICSING Thank you for purchasing Enter Tech's MagicSing. With this wireless karaoke system, you can enjoy singing. Sing together and have fun with your family and friends. Show off your talent anytime, anywhere!

Users Manual | ET23KM VER.100 ALL-IN-ONE KARAOKE ET23KM / EX23DT VER.100 FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is con-nected. Consult the dealer or an experienced radio/TV technician for help. Caution Modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. FCC Compliance Information : This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation IMPORTANT NOTE:

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 centimeters between the radiator and your body.This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. C O N T E N T S Chapter 01. Introduction SSppeecciiffiiccaattiioonnss BBaassiicc IItteemmss Optional Items Chapter 02. How to Set up Your MAGICSING HHooww ttoo CCoonnnneecctt ttoo aa TTVV HHooww ttoo CCoonnnneecctt ttoo aa TTVV && SStteerreeoo ((SSoouunndd SSyysstteemm)) How to Change the background video using other video sources How to Convert [PAL] or [NTSC] mode of TV Chapter 03. Product Guide ET23KM Main Station & Wired Mic ET23KM Wireless Karaoke Key Buttons ET23KM Remote Control Chapter 04. Functions and Settings KARAOKE

- Song Search

- Recording

- MY-MIC

- User's Contents

- Theme

- Jump

- Vocal Assist (Multiplex)

- Musical Notation

- User Background (SD card) HOW TO SING MOVIE GAME CONFIGURATION MENU SOFTWARE INSTALLATION ET MANAGER Chapter 05. Optional Items Recording Pack Additional Song Pack Chapter 06. Additional Information Precaution Troubleshooting 000 111 --- 000 111 000 111 --- 000 222 000 111 --- 000 333 000 222 --- 000 111 0022--0011 000 222 --- 000 222 000 222 --- 000 222 0033--0011 0033--0022 000 333 --- 000 777 000 444 --- 000 111 000 444 --- 000 333 0044--0055 044-06 0044--0077 000 444 --- 000 777 0044--0088 000 444 --- 000 888 000 444 --- 000 999 000 444 --- 111 000 000 444 --- 111 111 000 444 --- 111 222 000 444 --- 111 444 000 444 --- 111 666 0044--2233 000 555 --- 000 111 000 555 --- 000 222 000 666 --- 000 111 000 666 --- 000 222 Chapter.01 - Introduction SPECIFICATIONS ET23KM MAIN STATION Model No. Sound Engine Wireless Mic. Bandwidth Dimension / Weight Power Consumption Audio Output Video Output External Video Input Resolution USB(Slave only) Operating Temperature Power Supply ET23KM CT-500(SEIP-II) 2403 ~ 2477 MHz 137(W) x 203(H) x 60(L)mm / 322g During the Stand-By : 17mA / 153mW During the Playing

- JPEG MODE : 300mA / 2.7W

- MOVING MODE : 540mA / 4.86W Stereo Line Out(Full scale Output)

- TV Mode : 2Vrms - AMP Mode : 3.5Vrms Format : NTSC or PAL 1Vp-p @ 75 Ohm Load Composite1Vp-p @ 75 Ohm Load NTSC : 720 x 480(interlace) / PAL : 720 x 576(interlace) USB2.0(HI Speed), USB1.1Support

-10C ~ 60C AC Adaptor(DC 9V/1A) WIRELESS KARAOKE Model No. RF Frequency Battery Dimensions Weight Wattage Operating Temperature Effective Distance EX23DT 2403~ 2477 MHz 1.5V (AA) x 2 EA 43.5(W) x 43.5(L) x 259(H) mm 170g ( without the batteries ) 70mA / 210mW

-10C ~ 60C Up to 10m unobstructed distance User Manual | ET23KM VER.100 CHAPTER. 01 | 01 VER.100 Introduction - Chapter.01 Chapter.01 - Introduction BASIC ITEMS OPTIONAL ITEMS Wireless Karaoke Remote Control ET23KM Main Station Main Station Karaoke Handbook

(Song list & Users Manual) AV Cable

(Phone to RCA) Video Cable AC Adaptor

(DC 9V) BASIC ITEMS

. ET23KM Main Station

. Wireless Karaoke x 2 ea / Battery AA x 4 ea

. USB Installation CD

. Video Cable

. USB Cable

. Karaoke Handbook (Songlist & Users Manual)

. Remote Control / Battery AAA x 2 ea

. AV Cable (Phone to RCA)

. AC Adaptor (9V)

. SD card Additional S ong Pack You can add Additional Song Packs.

(Refer to Chapter 05-02) Recording Pack You can record your own singing.

(Refer to Chapter 04-03, 05-01) OPTIONAL ITEMS

. Recording Pack

. Additional Song Pack CHAPTER. 01 | 02 VER.100 03 | CHAPTER. 01 VER.100 How to Set up Your MAGICSING - Chapter.02 Chapter.02 - How to Set up Your MAGICSING HOW TO CONNECT TO A TV ET23KM Main Station Television AUDIO L / R & VIDEO OUT INPUT PORT I AUDIO L / R & VIDEO IN AV CABLE (RCA) 1. Connect the Audio / Video cable to the RCA jack terminal on your TV, as shown above. If there are only two RCA jack terminals on your TV (mono TV), connect the yellow jack (male) to the yellow RCA jack terminal and connect the white jack (male) to the other RCA jack terminal of your TV. Please turn off the function Automatic Volume Levelling (AVL / AVC) on your television set. HOW TO CONNECT TO A TV & STEREO (SOUND SYSTEM) ET23KM Main Station Television Stereo ( Sound System ) INPUT PORT I VIDEO AUDIO L / R 1. Connect the yellow jack to the yellow RCA terminal on your TV. Connect the red and white jack to jack terminals on your stereo (sound system). You might need an extension cable if your stereo (sound system) is placed far away from your TV. HOW TO CHANGE THE BACKGROUND VIDEO USING OTHER VIDEO SOURCES Television ET23KM Main Station External Device VIDEO IN 1. Connect the video cable to the VIDEO OUT jack terminal on other optional OUTPUT PORT | VIDEO OUT video sources (VCD, DVD,VIDEO). 2. Connect the other side of the video cable to the VIDEO IN jack terminal of MAGICSING. 3. Press [MODE+0+1] on either the mic or the remote control to use other video sources as background video by selecting "EXT.VIDEO INPUT"

on the configuration menu. HOW TO CONVERT [PAL] OR [NTSC] MODE OF TV 1. To convert to PAL mode, turn off the mic first. Press and hold button [8] on the mic, and then press the [POWER] button using another finger until the word PAL appears on the TV screen.

(Do not release button [8] and the [POWER] button until the word PAL appears on the TV screen.) 2. To convert to NTSC mode, turn off the mic first. Press and hold button [9] on the mic, and then press the [POWER] button using another finger until the word NTSC appears on the TV screen.

(Do not release button [9] and the [POWER] button until the word NTSC appears on the TV screen.) CHAPTER. 02 | 01 VER.100 02 | CHAPTER. 02 VER.100 Product Guide - Chapter.03 Chapter.03 - Product Guide ET23KM MAIN STATION ET23KM Main Station DC IN USB PORT SONG PACK COVER ANTENA POWER ON / OFF SWITCH R E W O P N O A POWER INDICATOR B CCC WIRELESS MIC INDICATOR SD CARD SLOT A POWER ON / OFF SWITCH

- Turns on or off the main station. B POWER INDICATOR

- A green light indicates that the ET23KM is turned on and ready for use.

- A red light indicates that the ET23KM is in the standby mode. Press the power button on the remote control or turn off the power button on the main station and turn it on again.

- No light indicates that the power button on the main station is in the off position. Please turn it on. C WIRELESS MIC INDICATORS

- A blue light indicates that the wireless mic is connected to the main station. ET W IRELESS KARAOKE KEY BUTTONS Number button 2 LCD Display 1 Reservation Button 4 Navigation Button 5 MODE Button 18 Pause Button 11 MIC Button 13 Melody Button 14 Record Button 17 Power Button 8 Cancel Button 3 Play / Stop Button 6 Search Button 7 MY-MIC Button 9 Vocal Assist Butt on 10 Volume Button 12 Echo Button 15 Key Button 16 1. LCD DISPLAY 2. NUMBER BUTTON 3. CANCEL BUTTON

- Press this button to erase one by one what you input or to cancel some function you chose. 4. RESERVATION BUTTON RES - Please select a song and press [RES] to reserve the song

(The song number will be displayed on the screen under the Reserved menu.)

- Press [MODE] twice to exit the reservation list and go back to the on-screen list by pressing [], [].

- In case you want to delete a reserved song, select that song in the reserved list and press [RES] again.

- You can reserve up to 100 songs, but only 4 songs with their respective numbers will appear on a blue bar on the upper portion of the screen. CHAPTER. 03 | 01 VER.100 02 | CHAPTER. 03 VER.100 Product Guide - Chapter.03 Chapter.03 - Product Guide 5. NAVIGATION BUTTONS

- Press these buttons to choose different modes, different songs and so on by scrolling up/down and left/right. II 6. PLAY / STOP BUTTON

- Press [/] once to play the selected song.

- Press [/] again to stop playing the song. 7. SEARCH BUTTON SEARCH - Pressing [SEARCH] will prompt you to different modes of choosing a song.

- You can also search a song from the on-screen list by pressing

[], [] or inputting characters. (Refer to Chapter.04-01) 8. POWER BUTTON

- Turns on or off the mic. Press [POWER] slightly to turn it on. Press [POWER] for 3 seconds to turn it off.

- When there is no input signal within 10 minutes, the power will be turned off automatically. 9. MY-MIC BUTTON

- This function enables you to save your own customized settings over the song you chose.

- While singing a song, adjust settings such as the volume, melody, echo, etc., press [ ] on the mic to save the settings.

- To see the stored [MY-MIC] song list, press [ ] again.

- Press [], [] to select the song you wish to sing again with the adjusted settings. Press [/] to play the song and press [RES] to delete it from the list.

- The lists containing the customized settings will be retained even after turning off the ET23KM. 10. VOCAL ASSIST BUTTON

- Press this button to see the list of vocal assist.

(Refer to Chapter.04-08)

- While singing a song, you can activate or deactivate vocal assist function by pressing this button repeatedly. 11. P AUSE BUTTON

- Press this button to pause the song you are singing.

- After pressing this button, you can also enjoy the "How to Sing"

function by using the navigation buttons. 12. VO LUME BUTTON VOL - When you press [VOL], two different sub volume control menus appear on the TV screen Music(press once) Multiplex(Press two times). 13. MIC BUTTON MIC

- Press [MIC] to adjust the volume of the main mic then press [], []

to decrease / increase the volume.

- This setting will remain until the product is reset or the values are changed by users. 14. MEL ODY BUTTON MEL

- Press this button, and then use the navigation buttons to adjust the melody levels of a song. 15. ECHO BUTTON ECHO

- Press this button and then use the navigation buttons to adjust the ECHO levels of a song. 16. KEY BUTTON KEY

- Press [KEY] and then press [], [] to decrease / increase the pitch level while singing a song. The TV screen will display the range of keys ( -7 ~ 8 ) with the default value [0] on the key bar at the upper part of the screen.

- At the end of the song or when you press [/] to stop the song, this setting will return to the initial default value [0]. CHAPTER. 03 | 03 VER.100 04 | CHAPTER. 03 VER.100 Product Guide - Chapter.03 Chapter.03 - Product Guide 17. RECO RD BUTTON REC

- Choose / select a song first before recording.

- Press [MODE + REC] to start recording.

- Press [/] to stop recording.

- Press [REC] to start the playback of the song. 18. MODE BUTTON MODE - You can see the function menu bar on the upper screen by pressing [MODE]. First, find a function you want to use by pressing [], [], and then press [/] to prompt you to the sub-menu. Press [], [] then [/] to choose an option.

- [MODE] is used in conjunction with other buttons to access secondary functions. CHAPTER. 03 | 05 VER.100 MODE Fun ction VOLUME (3 Different Sub Volume Control Menus Appear) Music volume control 0~15 / Melody volume control 0~15 Vocal Assist volume control 0~15 TEMPO (Adjusts the Tempo of a Song) The range of the tempo adjustment is between -7 ~ 8, and you can select a tempo at which you want to play the song by selecting a value from this scope. KEY (Adjusts the Level of the Pitch) The range of the pitch adjustment is between -7 ~ 8, and you can select the pitch level. SEARCH (Song Sear ch Function) Look for your favorite song. EFFECT (Musical Effects) : 4 Different Sub Menus Appear Mic Echo volume control 0~15 Instrument : You can change the melody instrument by using [], [],

[],[] to one of the 8 instrumental sounds while singing a song. Voice change : Mic voice alteration function that can change your voice either to female voice or to male voice. Vocal assist ON / OFF PLAYING (Technical Effects) : 5 Different Sub Menus Appear Jump : Skips the prelude or interlude Continuous Playback : If you wish to continue playing songs in sequential order, s elect a starting song and press MODE 6 2 (for example, if you select song number 241, play the song, and then press MODE 6 2). Random Play : MagicSing randomly chooses a song for you. Pause : A song pauses. Press [/] to continue playing. Selected Section Repeat : Repeats a certain section in a song. Press [MODE + 6 + 5] to set the starting point and [MODE + 6 + 5]

again to set the ending point. Pressing [MODE + 6 + 5] 3rd time turns off this function. This "selected repeat function" is not available for the prelude and interlude sections of a song USER'S CONTENTS USER'S JPEG / MP3 REC & PLAY Record / Playback (Playing the recorded song) SPECIAL EFFECT : 5 Different Sub Menus Appear Musical No tation (Key Note Guide) / My-Mic / Theme : Background Themes (9 background them es to choose fro m) and Scoreboard (Records your scores at the end of each song) / Silence : Silent mode (you can choose from level 1, level 2, and off) / Lyrics ON / OFF CONFIG. (Configuration)

[MODE]+[1]

[MODE]+[2]

[MODE]+[3]

[MODE]+[4]

[MODE]+[5]

[MODE]+[6]

[MODE]+[7]

[MODE]+[8]

[MODE]+[9]

[MODE]+[0]

06 | CHAPTER. 03 VER.100 Product Guide - Chapter.03 Chapter.04 - Functions & Settings ET REMOTE CONTROL 1 2 3 6 4 5 8 7 9 11 10 12 13 14 17 20 23 25 15 16 18 MODE 19 22 21 24 27 26 1 POWER :POWER ON/OFF. 2 VOCAL ASSIST SETTING :Vocal Assist O N / OFF 3 MY-MIC :MY-MIC. 4 BACKGROUND CHANGE :Changes backgrounds. 5 THEME :Selecting background image. 6 SHORTCUT :Guides directly to some modes. 7 NAVIGATION :Muilt-function guide buttons. 8 PLAY / STOP :Plays & Stops a song or function. 9 KEY :Adjusts the song key. 10 TEMPO :Adjusts the song tempo. 11 VOLUME :Adjusts the volume. 12 MELODY :Adjusts the melody level. 13 ECHO :Adjusts the echo level. 14 0~9 :Arabic numbers. 15 16 RES :Reserves and cancels a reservation. 17 SEARCH :Song search. 18 MODE :Functions. 19 II :Pause. 20 RANDOM :Random song select. 21 REPEAT :Section repeat.

:Cancel. 23 SCORE :Changes the level of difficulty. 24 M/F :Converts voice to mans or womans 25 VOICE :Changes the voice. 26 SILENCE :Silence mode. 27 REC :Recording & Playback. KARAOKE 1 SONG SEARCH

. Entering the Song Search Mode

- Press [SEARCH] or [MODE+4] on the remote control to enter the Song Search Screen. II. Buttons for the song search mode on the remote control

- [SEARCH] : Press [SEARCH] repeatedly to select one of these three modes below. 1) Searching by Title : You can search for a song by typing some letters or numbers or special characters of the song title. (Refer to IV. How to Search a Songon the next page, chapter 04-02) special characters of the singers name. (Refer to IV. How to Search a Song on the next 3) Exit Mode : Neither the title icon nor the singer icon will be highlighted on the screen.

- [ ] : Press this button to erase characters.

- [MODE] : Pressing this button repeatedly while keying in characters toggles you to either the letters, numbers or special characters. 01 | CHAP TER. 04 VER.100 CHAPTER. 03 | 07 VER.100 Functions & Settings - Chapter.04 Chapter.04 - Functions & Settings 2 RECORDING

. Exiting the Song Search mode

- After entering the song search mode, search a song using [], [], [], []

and play the song by pressing [/] or reserve the song by pressing [RES].

- After entering the song search mode, set it to the "exit mode" by pressing

[SEARCH] and end the search by pressing any number button.

(If there are reserved songs, the list containing those reserved songs will be displayed on the screen.)

. How to Search a Song

[2] A B C [3] D E F [4] G H I [5] J K L After entering the song search screen, press [MODE] to set one of the three input methods below. Input letters

[1]

[6] M N O [ 7] P Q R S [8] T U V [9] W X Y Z [0] SPACE Input numbers

[1] 1 [ 2] 2 [ 3] 3 [ 4] 4 [ 5] 5

[6] 6 [ 7] 7 [ 8] 8 [ 9] 9 [ 0] 0 Input special characters

[1] . , : ; [2] ` [3] _ = ~ [4] + - * / [5] ! # $ %

[6] & ? @ [7] ^ | [8 ] ( ) < > [9] [ ] [0] SPACE

(The search function disregards spaces. E.g. : If you want to search a song whose title is A DONDE VOY, you only have to enter AD without space between characters to execute the search.)

- Press the [0] ~ [9] buttons to input characters.

- Examples To enter "TOU" : Press [8] once [6] three times [8] two times To enter "ABC" : Press [2] once [2] two times [2] three times Use this function to record your singing(VOICE with the MUSIC) and to playback your recorded singing performance. 1. RECORDING TO THE MEMORY IN THE MAIN STATION In case of no SD card and/or Recording Pack on the main station, follow the procedure below. How to Use:

recording ( ). 1) Select a song. 2) Press [ ] the remote control to start 3) To stop : Press [/]. 4) To do playback :

Press [] on the remote control ( ). 5) To stop the playback : Press [/]. A song recorded less than two seconds will not be recorded. You can record a song of up to five minutes long.

[approximately f or 1(one) song]

2. RECORDING TO AN SD CARD AND/OR RECORDING PACK You can record your own singing into an SD card or a Recording Pack. If both the SD card and Recording Pack inserted at the same time, you need to decide which one to use. (The recording pack looks exactly the same as an additional song pack but contains no songs and its data is replaceable.) How to Use:

1) Insert an SD card or Recording Pack before turing on the main station. 2) Select a song. 3) Press [ ] under the "RECORD" section on the remote control to start recording 4) To stop, press [/]. 5) To see the list of the recorded songs, press [] the remote control. 6) To play back the song, choose a recorded song first by pressing

[], [], [], [] on the remote control. After selecting the song the song, press [/] on the remote control. 7) To stop the playback, press [/]. 8) To delete a recorded song, choose the song and press [RES]. CHAPTER. 04 |

02 VER.100 03 | CHAPTER. 04 VER.100 Functions & Settings - Chapter.04 Chapter.04 - Functions & Settings You cant record your singing to an SD card when MOVING PICTURES are playing.While an SD card or Recording Pack is being used, your singing cannot be recorded on the main station memory. When an Additional Song Pack is used on the main station, songs recorded from the Additional Song Pack can be played or deleted too. You cannot record your singing performance in the middle of the song. Therefore, even if you press [ ] on the remote control while singing a song, the song stops, restarts, and then the recording takes place. Settings such as tempo or key should be set in advance as these cannot be changed while the song is being recorded. Also, during the recording, certain functions such as continuous play or pause are not available. Recording time 1. Recording Pack : About 180 minutes (NAND 1Gb) 2. SD card : About 60 Hours (2GB)

(In case there is no files on the SD card) 3 MY-MIC This function enables you to save your own customized settings over the song you chose such as the volume of music, melody, microphone, echo effect, and vocal assist as well as the tempo, key setting. You can recall these settings when you select and sing the song again. 1. SAVING ADJUSTED SETTINGS

- While singing a song, adjust settings such as the volume of music, melody and so the way you want to customize the song, and then press [ ] while the song is still playing on the remote control.

- The song with the adjusted settings will be saved in the [MY-MIC]

song list.

(If the same song is already in the list, the song will be updated with new settings.)

- The lists containing the customized settings will be retained even after turning off the ET23KM. 2. SELECTING & PLAYING A SONG

- Press [ ] to see the MY-MIC] song list while not playing any song.

- Select the song from the list and press [/] to play the song with the stored settings. 3. DELETING A SONG

- Press [ ] while selecting a song to see the stored list of MY-MIC songs.

- Press [], [], [], [] to select the song you want to delete, and press [RES] to delete it . CHAPTER. 04 | 04 VER.100 05 | CHAPTER. 04 VER.100 Functions & Settings - Chapter.04 Chapter.04 - Functions & Settings 4 USER'S CONTENTS Users can play their own contents (MP3 and Picture) they saved in an SD card. Press [MODE + 7] to explore. 1. USER'S JPEG Play & Enjoy your own picture through TV.

- Before put ting JPEG files i nto an SD card, the files have to be converted by ET-MANAGER.

(Refer to the "USER BACKGROUND" section)

- Insert the SD card into ET23KM.

- Select this function for your pictures to be shown on the screen.

- To move pictures forward and backward, press [] or [].

- To exit, press [ ]

or [RES]. 2. MP3 Play & Enjoy MP3 files through TV.

(No need to convert any MP3 files and to use any music player.)

- Move the downloaded MP3 files into the "MP3" folder on the SD card from your PC.

- Insert the SD card into ET23KM.

- When you select this function, a MP3 list will appear on the screen.

- Select a song from the list and press [/] to play the song.

- Follow the direction of "Control Bar" shown on the screen.

- To exit, press [ ]

or [RES]. 5 THEME (BACKGROUND THEME AND SCOREBOARD) 1. THIS FUNCTION CAN ONLY BE SET BEFORE CHOOSING A SONG

- Press [MODE + 9 + 3] or [THEME] on the remote control for this function. 2. TO FINISH THIS FUNCTION, PRESS [RES]

3. BACKGROUND THEME

- You can select any theme from a set of nine different themes as screen background.

- Press number buttons [1] ~ [9] or [], [], [], [] to set the theme you want.

[1] Love

[4] Nature

[7] City

[2] Party

[5] Carnival

[8] Country

[3] Summer

[6] Sports

[9] Tour Once a background theme is set, only the pictures related to the selected theme will be shown on the screen. 4. SCOREBOARD

- The scoreboard shows the corresponding song numbers and the scores of the songs that you have played.

(Only 7 songs will be displayed on the screen.) 6 JUMP (PRELUDE / INTERLUDE SKIP)

- You can use the [JUMP] function only during the prelude or the interlude of a song.

- Press [JUMP] on the remote control to skip the prelude or the interlude part of a song. CHAPTER. 04 | 06 VER.100 07 | CHAPTER. 04 VER.100 Functions & Settings - Chapter.04 Chapter.04 - Functions & Settings 7 VOCAL ASSIST (MULTIPLEX) The song comes up with a professional singer's voice with the music. This feature is available only songs indicated "Vocal Assist" on the TV screen and song book. 1. VOCAL ASSIST [ ON ]

- If you wish to activate this function, press the [ ]

control or [MODE + 5 + 4] to turn it ON, while singing a multiplex song.

- The voice will fade out when you sing a song and if you stop singing, the voice will fade in. on remote 2. VOCAL ASSIST [ OFF ]

- If you wish to deactivate this function, press [ ]

[MODE + 5 + 4] to turn it OFF, while singing a multiplex song, which enables you to sing along with the singer's voice.

- If you do not want to hear any voice of the vocal assist at all, press [-]

button of [Vocal Assist] on the remote control, and then the volume bar will appear on the upper part of the TV screen. Then press [-] until it reaches 0. or 3. VOLUME ADJUSTMENT

- Press Vocal Assist [-], [+] on the remote control to adjust the volume of the vocal assist until it reaches a desired level. 8 MUSICAL NOTATION (KEY NOTE GUIDE) 1. Press [MODE + 9 + 1] on the mic to see the song list containing only the songs with this note guide function.

(This function is available only for the songs in the list.) 2. Choose a song from the list and play the song. After that, press [MODE + 9 + 1] on the mic to choose one of the three settings which are Normal, Easy, and OFF. A. Normal : Displays the musical notes on the upper part of the screen with the original key of the song. 9 USER BACKGROUND(SD CARD) 1. BACKGROUND IMAGES

- If you have background images in a folder named "BACKGROUND"

on your SD card, you can display them on the TV screen when you select "USER'S JPEG" mode. 2. HOW TO USE

- Install ET-MANAGER on your computer using the CD provided with the mic.

- Execute ET-MANAGER.

- Change the format of image files that you have by selecting BACKGROUND IMAGE.

- When changing the image file format, these files are stored in a designated folder with the format of *.ebj.

- Move the converted image files into the BACKGROUND folder on the SD card, and insert the SD card into the slot of the main station. If the SD card drive is designated as E : \, and the converted image file is image.ebj, move the image.ebj into the E:\BACKGROUND folder. Image file formats that you can convert into ".ebj" format include Bitmap file (*.bmp), JPEG file (*.jpg, *.jpeg), TIF file (*.tif, *.tiff), and GIF file (*.gif). For the detail information, refer to "ET-MANAGER"section.

(Chapter.04-17) B. Easy : Displays the musical notes on the upper part of the screen with the basic C key. C. OFF : Does not display any musical notes. A musical notation appears on the upper part of the screen as soon as a song starts. This g ives the user an idea of the) key/pitch of the song he/she is about to sing. CHAPTER. 04 | 08 VER.100 09 | CHAPTER. 04 VER.100 Functions & Settings - Chapter.04 Chapter.04 - Functions & Settings HOW TO SING This function is for users to keep practicing a particular part of a song they want by moving the part of the song forward and backward. Users also can find any particular parts of a song with its play time as well. 1. PURPOSE

- When you want to repeat some part of the song over and over to practice.

- When you want to move to some part of song without wating.

- When you want memorize some part of song.

- When you want go backward to repeat singing. 2. HOW TO USE 1) Press [ II ] while singing. 2) Press [], [], [], [] to show lyrics 3) Press [], [] to go forward or backward. 4) Press [/] to play. 5) Press [ II ] again if you want to repeat the part and follow the same procedure from 2) above. Does not support any vocal assist on this mode. MOVIE This mode is for users to enjoy music videos, moving pictures and their own contents downloaded from the internet such as MTV, movies, TV shows. 1. HOW TO USE 1) Press the [MOVIE] button located on the bottom part of the remote control. 2) When the list of movies is shown, press the [], [] buttons to navigate through movie files, and then select the movie file you want to play. 3) Press [/] to play or stop. 4) Press [], [] to move it faster (Pressing once : x2 faster, twice : x4 faster, three times : x8 faster and four times : x20 faster) and then press [/] to play. 5) Press [], [] to select another movie file you want to play. 6) Press [ + ], [ - ] under the [VOLUME] section on the remote control to adjust the volume. 7) ZOOM : Press [ 0 ] HELP : Press [MODE]

If the capacity of a movie file is too big due to its high definition, some delay on its video and sound may occur. ET23KM supports an SD memory card up to 8GB. CHAPTER. 04 | 10 VER.100 11 | CHAPTER. 04 VER.100 Functions & Settings - Chapter.04 Chapter.04 - Functions & Settings GAME When you select a game, its instructions will be displayed on the TV screen before the game starts. 1. SINGING CONTEST

- This contest will be held between team A and team B. Each teamrespectively selects three songs at random and sings them by turns. A team getting a higher score will be the winner. This game will be started by pushing any button on the mic except the power button. Have fun!!

2. SONG QUIZ

- Please listen carefully to the music and select a correct song title. If your answer is incorrect, one heart [1 point] will be reduced. There is also a bonus question in every five questions from which you get one heart [1 point] if your answer to that bonus question is correct. Please select one of the levels below by pressing the corresponding no. button on the mic to start the game. 3. IQ200 This game is to test players memory power. 1 or 2 player can play this game. Players have to memorize the keyboard number and press same key. 4. BINGO 1

- Game 1 : Randomly showing numbers from 1 to 99.

- To restart the game press [MODE] button.

- To exit, press [ ]

or [RES] button. 5. BINGO 2

- Game 2 : 1~4 players can play at the same time. Players have to find a set of numbers from 1 to 9 to win and refer to the instructions on the screen.

- To restart the game press [MODE] button.

- To exit, press [ ]

or [RES] button. 7. TEN-TEN Each player gets 5 cards and will have 10 seconds to make 20 or 10 in sum by adding number of 3 cards. Remaining 2 cards determines the winner. Add 2 remaining cards and only last digit number is the players number. Higher number wins the game. But if remaining 2 cards numbers are same. It is higher card than last digit single number (0,0) is the highest ranking number. Ranking of number Highest-------------------------------------------------------------Lowest

(0,0) (9,9) (8,8) (7,7) (6,6) (5,5) (4,4) (3,3) (2,2) (1,1) X9 X8 X7 X6 X5 X4 X3 X2 X1 EXAMPLE Player 1 7 8 5 6 1 7+8+5 =20 6+1 = 7 Player 2 0 1 9 3 8 0+1+9=10 3+8 = 11 Player 2s number 1 Player 3 8 3 9 7 7 8+3+9=20 Player 4 1 8 1 0 0 1+8+1=10 7, 7 same number Player 3s number (7,7) 0, 0 same number Player 4s number (0,0) player 1s number 7 1st place : Player 4, 2nd place : Player 3, 3th place : Player 1, 4th place : Player 2 8. Black Jack This games rule is same as basic Blackjack rule. Goal of this game is making 21 with several numbers of players card. 6. DART

- This game is called Dart Game.

- Players throw darts to the target through their sound.

- If a player makes a higher or louder sound, the dart will go further and faster and vice versa. CHAPTER. 04 | 12 VER.100 13 | CHAPTER. 04 VER.100 Functions & Settings - Chapter.04 Chapter.04 - Functions & Settings CONFIGURATION MENU 1. Press [MODE]+[0] to enter the configuration menu. 2. Press [MODE] to exit the configuration.

[1] Select a function using [], [] or press the corresponding number on the left side of the function. To select a sub-option, press the corresponding number on the left side again or press [/].

[2] Select a function by pressing [], []. And then press

[0] to change its option, and press [], [] to select sub-options.

(Press [/] to exit a sub-option.) 3. CONFIGURATION OPTIONS 2) Real Time Score : Shows your score throughout the whole song your are currently singing if you turn this function on. 3) Song Countdown : Sets the countdown (4, 3, 2, 1) display ON/OFF. 4) Lyrics Line : Selects th e number of lyric li nes shown on the TV screen

(2 lines, 3 lines, Auto). 5) Lyrics Position : Sets the position of lyrics on the screen.

(Center, Left-Right, All Mixed) 6) Language : Selects the language for the system.

[1] SELECTING BACKGROUNDS : Users can select one of the four types of background images as below. 1) MAGICSING JPEG : Showing built in JPEG image files as a background. 2) EXT-VIDEO INPUT : Showing external videos as a background. 3) MOVING PICTURE : Showing moving pictures (video files) from a SD card. 4) USER'S JPEG : Showing the users JPEG files from an SD card.

[2] OUTPUT MODE : Sets the output mode to TV or AMP.

[3] LYRICS BAR : ON (A blue bar behind l yrics ap pears) / OFF.

(The blue bar disappears)

[4] MIC V.C. : Changes your voice either to a females or males.

(The OFF mode means to go back to your own voice) 4. ADVANCED CONFIGURATION Press [5] in the config. menu to enter the advanced config. 1) Score Check BEGINNER : This level only evaluates your tempo when you sing a song. AMATEURE : This level evaluates both tempo and pitch when you sing a song. Singing in suitable chord is accepted. PROFESSIONAL : This level evaluates both tempo and pitch based on the original Songs key and tempo. OFF :

Turns off(hides) score check function when you sing a song. This setting remains until the product is reset or the values are changed by users. CHAPTER. 04 | 14 VER.100 15 | CHAPTER. 04 VER.100 Functions & Settings - Chapter.04 Chapter.04 - Functions & Settings 1) USB Driver Installation This installation should be completed in advance to execute ET Manager. Click "Install USB Driver" () and follow the below instruction of ET USB Driver - InstallShield Wizardas shown below. a) Click Next to start the installation. SOFTWARE INSTALLATION Installing the ET manager and USB driver in your PC :

*PC INSTALLATION CD USB Port

*USB Cable 1. Enables you to use your own images or pictures in your computer as MagicSing background pictures on TV. 2. Enables you to convert the recorded songs from the Recording Pack to your PC as wave files. Note : In the absence of the Installation CD, you can install the ET manager and USB driver softwares in your PC by downloading them from our website. (www.enter-tech.com) 1 HOW TO INSTALL USB DRIVER + ET MANAGER Insert the Installation CD into your PC, and then you will see the pop-up screen as shown below. b) Click Continue anyway to proceed. 1 2 3 Note : Please do not connect MagicSing to a PC by USB cable before installing "Install USB Driver". CHAPTER. 04 | 16 VER.100 17 | CHAPTER. 04 VER.100 Functions & Settings - Chapter.04 Chapter.04 - Functions & Settings c) Select Yes and click Finish to restart the computer. 3) EXIT After completing the two previous installations, you will see the screen below again. In order to exit, click "Cancel" (). 2) ET Manager Installation After restarting the computer, take the Installation CD out and put it back into your PC again. Click "Install ET Manager" () on the first pop-up screen and follow the instructions of ET Manager InstallShield Wizard. When you see the pop-up screen below, click "Finish" to complete the ET Manager installation. 1 2 3 And follow the below steps to execute the ET Manager properly. 2 HOW TO CONNECT MAGICSING TO A PC WITH A USB CABLE 1. Turn on the power of main station. 2. Plug the USB cable in the PCs USB port as shown in the picture below. 3. Plug the USB cable in the MagicSing's USB port as shown in the picture below. DC IN 8V USB CONNECTED will appear on TV SCREEN. CHAPTER. 04 | 18 VER.100 19 | CHAPTER. 04 VER.100 Functions & Settings - Chapter.04 Chapter.04 - Functions & Settings 4. When you connect MagicSing to a PC for the first time, the Found New Hardware Wizard window below will show up as it will try to search the USB driver in your PC system.

(In order to operate ET manager, the following steps should be completed.) a) Click Yes, this time only and Next to continue. b) Click Install the software automatically (Recommended) and Next to continue. c) Click Continue anyway to proceed. CHAPTER. 04 | 20 VER.100 21 | CHAPTER. 04 VER.100 Functions & Settings - Chapter.04 Chapter.04 - Functions & Settings d) Click Finish to close the wizard. ET MANAGER 1 GENERAL DESCRIPTION A. Background Image Converts image files you have in your PC into background images of MagicSing so that you can enjoy your personalized picture backgrounds on TV. B. Recorded Song You can save your songs in the Recording Pack and you can convert and transmit the recorded songs into your PC as a "MP2" file (USB cable needed) to play those through PC or MP3 player. Note : This function is available only when you use a Recording Pack. 2 FUNCTION A. Background Image 1) User Interface Layout 1 6 2 4 5 3 1 BACKGROUND IMAGE : Shows the "Background Image" window when you click on this button. 2 IMAGE FILE SEARCH WINDOW : Enables you to search folders in your PC and select the images from the chosen folders. 3 IMAGE VIEWER : Enables you to see your chosen images. 4 SAVE IMAGE IN SD CARD : Converts the selected image to a MagicSing background image file when you click on this button. 5 CONVERT PROGRESS BAR : Shows the length of the time in which your image files are being saved into an SD card. 6 EXIT : Allows you to exit from the "ET manager window"

CHAPTER. 04 | 22 VER.100 above. 23 | CHAPTER. 04 VER.100 Functions & Settings - Chapter.04 Chapter.04 - Functions & Settings 2) How to use P1 STTEEP1 1 Open the ET Manager window by double-clicking the ET Manager icon in your P C a Background Image screen will appear. 2 Search and select images from your files.(Choose from among the folders 3 first, and then select an image by checking off the small box beside the file name.) Click the file name to see the image on the Image Viewer. 4 Click the SAVE IMAGE IN SD CARD to save the selected images as 5 background files. STEP2 6 Search for your SD card and click it, and then click ok.

(You will see the progress bar moving which indicates that the files are being saved.) 7 To make sure that the images were saved in the SD card, open the SD card by clicking My Computer, and then click Removable Disk (the SD card folder). You will see a folder entitled BACKGROUND, click it and you will see your image files converted to EBJ.file format. STEP3 8 Safely remove the SD card from your PC and insert it into the SD card slot located on the right si de of the MagicSing main station.(IMPORTANT : THE MAIN STA TION SHOULD BE TURNED OFF before inserting the .SD card) 9 Turn the main station on. MagicSing will automatically display the images saved in the SD card on your TV. B. Record 1) User Interface Layout. 1 10 2 3 4 5 6 7 8 9 1 RECORDED SONG : Click on the "RECORDED SONG" tab to work with Recorded Songs. 2 SONG LIST : When you click LIST, it shows you the list of the song titles recorded in the recording pack. (if theres any) 3 RECORDED SONG INFO : Shows the song info. of a song recorded in the recording pack which is currently playing. 4 SONG COUNTER BAR : Time counter of the song currently playing. 5 LIST : Clicking on this tab shows you the song titles(if there's any) in the "Song list" window. 6 PLAY / STOP : Clicking on this PLAY tab plays the selected song

(Select a song by checking off the box beside the song title.) Clicking on this STOP tab stops the song currently playing.

(The PLAY button will be transformed into the STOP button as soon as the song starts playing.) 7 NEXT : Clicking on this tab plays the next song on the list.

(Check off the box first beside the song title(s) you want to play next.) 8 SAVE : Clicking on this tab saves the selected songs in your PC as a MP2 file. 9 DOWNLOAD PROGRESS BAR : Shows the length of the recorded song currently playing. 10 EXIT : Allows you to exit from the RECORDED SONG window. 2) How to use 1 Insert a recording pack into the main station and turn on the power. 2 If there are recorded songs in the recording pack, just go to step 3. If not, record your favorite songs first which you want to convert and save into your PC. 3 Connect t he main st ation to a PC by USB cable. 4 Execute ET MANAGER. 5 Click on the RECORDED SONG tab. 6 Click on the LIST tab to show you the song titles (if there's any) in the Song List window. 7 Select a song from the song list by checking off the box beside the song. 8 Click on the PLAY / STOP tab to hear the selected song on your PC. 9 Click on the NEXT tab to play the next song.

(Check off the box first beside the song title(s) you want to play next.) 10 Click on the PLAY / STOP tab to stop the song currently playing. 11 Click on the SAVE tab to save the selected song into your PC CHAPTER. 04 | 24 VER.100 as a MP2 file. 25 | CHAPTER. 04 VER.100 Optional Items - Chapter.05 Chapter.05 - Optional Items RECORDING PACK You can record your own singing into the Recordng Pack. ADDITIONAL SONG PACK You can add more of your favorite songs to MagicSing.

: MagicSing should be turned off first. Turn off MagicSing MMaaggiiccSSiinngg Insert the Recording Pack into one of the slots in the back of the main station according to the direction of the arrow. Turn on the power of main station then select a song number and press [ ] under the record section on the remote control. To stop the recording, press [ ] again on the remote control or you can also press [/]. To play back the recorded songs, press [] under the record section on the remote control, and your recorded songs will be listed on the screen. Select a song using [/], then press [/] . To stop the playback, press [/] again. To delete the recorded songs, press [RES] on the highlighted songs. You cannot record your singing performance in the internal memory of main station while you are recording it in the recording pack. You cannot record your singing performance in the middle of a song. If you press [ ] in the middle of the song, the song stops, restarts, and then recording takes place. The Tempo, Jump and Key functions will not work when you are playing back the recorded songs. How to Insert an Additional Song Pack First, turn OFF the power. This is very important to turn off the main station before removing or inserting a song pack. main station Clip Lock Turn off the power of the main station Pull up the clip lock on the back cover of the main station, according to the direction of the arrow, then remove the back cover. Make sure the arrow on the song pack is pointing left when you insert the song pack.

(6 additional song packs can be inserted.) After the song pack is inserted, close the back cover. Turn on the power of main station. SONG LIST INSERTION Press down both the top and the bottom metal tabs of the binder simultaneously to open the binder rings. Insert the new song list between the binder rings. Close the binder rings. CHAPTER. 05 | 01 VER.100 02 | CHAPTER. 05 VER.100 Additional Information - Chapter.06 Chapter.06 - Additional Information PRECAUTION Use the adaptor that comes with MagicSing only. There are many adaptors that are plug-compatible with MagicSing, but have different electrical specifications. T hese adaptors would work only for a short period of time but would very soon damage MagicSing. USE THE RECOMMENDED ACCESSORIES ONLY (DC 9V / 1A) Do not drop MagicSing. Any external or internal damage due to dropping is not covered under warranty. Do not insert or remove song packs while MagicSing is turned on. Do not store MagicSing in direct sunlight, in a high temperature, or highly humid. Do not use strong chemicals to clean MagicSing, as these chemicals may damage the unit. Keep MagicSing away from pets and small children. Do not press the LED / LCD part. Never use a sharp object on the keypad. In case MagicSing was stored in a high-temperature setting, allow sufficient time for it to cool down before using it. Do not immerse MagicSing in water or splash water on it. Water damage is not covered by the warranty. Do not disassemble the parts of the MagicSing. This will void the warranty. Do not plug MagicSing in if it is wet. Immediately contact the service center. If any solid object or liquid gets inside MagicSing, unplug it and have it checked by our service center. TROUBLESHOOTING In case of problems, please check the following recommendations before contacting the service center. If MagicSing doesnt power up ET23KM MAIN STATION Make sure the adaptor is correctly plugged into the power outlet. Check that the male plug is properly inserted into the female jack. WIRELESS KARAOKE Check if the battery type is AA. If the battery is low, MagicSing may not work properly. If the user's voice cannot be heard Press the VOL button and check the volume of the wireless karaoke. If the TV does not show pictures or emit sound Make sure all the AV connectors are properly connected according to the correct colors. Check if the TV is in the video mode. If the video does not show properly (converting PAL or NSC mode) To convert to PAL mode, turn of f a wireless mic fi rst. Press and hold button 8 on the wireless mic, and then press POWER button using another finger until the word PAL appears on the TV screen. (Do not release button 8 and the POWER button until the word PAL appears on the TV screen.) To convert to NTSC mode, turn off a wireless mic first. Press and hold button 9 on the wireless mic, and then press the POWER button using another finger until the word NTSC appears on the TV screen.

(Do not release button 9 and the POWER button until the word NTSC appears on the TV screen .) If there is any doubt about the products performance Turn off a wireless mic first, and then press and hold the 0 button on the wireless mic, and press the [POWER] button using another finger until the words USER RESET appear on the T V screen. (Do not releas e the 0 button and the [POWER] button until the words USER RESEpear on the TV screen) When the wireless karaoke needs to be repaired, the main station should be included and returned to your nearest service center. To contact our nearest service center in your area, please visit our website. "www.enter-tech.com"

CHAPTER. 06 | 01 VER.100 02 | CHAPTER. 06 VER.100 WWW.ENTER-TECH.COM ENTER-TECH CO.,LTD. Enter B/D, 156-7, Ojeong-dong, Ojeong-gu, Bucheon-City, Kyunggi-do, Korea ( 421-814 ) TEL : +82-32-673-1671 / +82-2-2605-0884 | FAX : +82-2-2691-5354 | E-MAIL : enter@enter-tech.com Designed by ENTER-TECH KOREA | Printed in China VER.100 VER.100