AriA 5MediA receiverQuick Start Guide table of contents OvervieW 2 4 6 7 Safety instructions Whats included Front Panel rear Panel cONNectiNG videO 8 9 High-definition tvs Standard-definition tvs cONNectiNG audiO 10 Stereo cONNectiNG tv SOurce 11 cable or antenna cONNectiNG NetWOrk 12 ethernet POWeriNG uP 13 13 14 Setting up remote control using ir extender receiver connecting to Power Source 15 declaration of conformity cOPYriGHt 2015 entone, inc. all rights reserved. this document contains proprietary information protected by copyright. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by any means, electronic, mechanical, photocopying, recording or otherwise, without the prior written consent of entone, inc., 20863 Stevens creek Blvd, Suite 300, cupertino, ca 95014, u.S.a. diScLaiMer iF tHiS PrOduct directS YOu tO cOPY MateriaLS, YOu MuSt Have PerMiSSiON FrOM tHe cOPY-
riGHt OWNer OF tHe MateriaLS tO avOid viOLatiNG tHe LaW WHicH cOuLd reSuLt iN daMaGeS Or OtHer reMedieS. tradeMarkS entone and the tagline connecting the Home are trademarks of entone, inc. all other trademarks or registered trademarks belong to their respective owners. this item incorporates copy protection technology that is protected by u.S. patents and other intellec-
tual property rights of rovi corporation. reverse engineering and disassembly are prohibited. cHaNGeS the material in this document is for information only and is subject to change without notice. While rea-
sonable efforts have been made in the preparation of this document to assure its accuracy, entone, inc. assumes no liability resulting from the use of the information contained herein. entone, inc. reserves the right to make changes in the product design without reservation and without notification to its users. P/N: 99-709404-01 - v0.2 i e d u G t r a t S k c u Q i r e v i i e c e r a d e M a r a i 1 important Safety instructions important Safety instructions (continued) WarNiNG: to reduce the risk of fire or electric shock, do not expose this ap-
paratus to rain or moisture. the apparatus shall not be exposed to dripping or splashing and that no ob-
jects filled with liquids, such as vases, shall be placed on the apparatus. read these instructions. keep these instructions. Heed all warnings. Follow all instructions. do not use this apparatus near water. clean only with dry cloth. do not block any ventilation openings. install in accordance with the manu-
facturers instructions. do not defeat the safety purpose of the polarized or grounding-type plug. a polarized plug has two blades with one wider than the other. a grounding type plug has two blades and a third grounding prong. the wide blade or the third prongs are provided for your safety. if the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. Only use attachments/accessories specified by the manufacturer. unplug this apparatus during lightning storms or when unused for long peri-
ods of time. refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the ap-
paratus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. to reduce the risk of electric shock, dO NOt remove cover or back panel. No user serviceable parts inside. refer servicing to qualified personnel. i Q u c k S t a r t G u d e i i a r a M e d a r e c e i i v e r 2 to help prevent electric shock, plug the power cable into properly grounded sources. use only properly grounded extension cords and adaptors, if they are needed. the ac main plug is used as the disconnect device, the disconnect device shall remain readily operable. Make sure nothing is lying on any of the cables. Be sure the cables are located where they will not be stepped on or tripped over. do not spill food or liquids onto the unit. do not push any objects into the free slots. doing so will damage the unit, can cause fire or electrical shock, and can short out interior components. do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. do not block cooling vents. do not place the equipment in a closed-in wall unit. When you disconnect a cable, pull on its connector or on its strain relief loop, not on the cable itself. Some cables have a connector with locking tabs; if you are disconnecting this type of cable, press in on the locking tabs before disconnecting the cables. When you connect a cable, make sure both connectors are correctly oriented and aligned before connecting to avoid bending connector pins. For PLuGGaBLe eQuiPMeNt, the socket-outlet should be installed near the equipment for easy access. changes or modifications not expressly approved by the party responsible could void the users authority to operate this device. i e d u G t r a t S k c u Q i Operating information Operating temperature: 0 c (32 F) to 45 c (113 F) r e v i i e c e r a d e M a r a i 3 Whats included aria Media receiver diN-to-rca cable (Optional) ir extender receiver (Optional) ir remote control* (Optional) 2 Batteries for remote control (Optional) aria Quick Start Guide remote control Guide* (Optional) ethernet cable (Optional) HdMi cable (Optional) ac Power adapter*
ethernet cable additional items that may be required (not included):
HdMi cable rF coaxial cable Network router i e d u G t r a t S k c u Q i r e v i i e c e r a d e M a r a i
*the remote control may vary and is dependent on your service provider.
*the ac Power adapter may vary and is dependent on your service provider. 5 i Q u c k S t a r t G u d e i i a r a M e d a r e c e i i v e r 4 aria Front Panel 2 i Q u c k S t a r t G u d e i 1 Name 1 reset Power indicator Hd indicator Link indicator 2 3 4 aria rear Panel 1 2 3 4 5 6 7 8 4 3 i e d u G t r a t S k c u Q i Description reset the device factory settings with a thin metal probe Solid red indicates the unit is on Flashing red indicates the unit is starting up Blue dot indicates current program is playing in Hd
(720p or higher) resolution Green dot indicates that ethernet or Wi-Fi network connection is active Name 1 Smart card Port Description For user with SiM format Smart card Only. antenna/cable connector ir extender Jack iec/F port for connecting to cable / antenna source to connect ir extender receiver Sd video HdMi ethernet uSB Power 9-Pin diN conector for connecting to video output us-
ing diN-to-rca cable digital video and audio port for connecting to a high-
definition tv (Hdtv) rJ45 plug for connecting to adSL modem or network access equipment to connect uSB devices such as uSB Flash drive and external Hard drive
(max 500ma load) dc power jack (100-240v, Output 12v/2a) 2 3 4 5 6 7 8 r e v i i e c e r a d e M a r a i availability of certain features is dependent on your service provider. availability of certain features is dependent on your service provider. 7 i a r a M e d a r e c e i i v e r 6 i Q u c k S t a r t G u d e i SteP 1: cONNectiNG videO Option 2: composite video aria provides two video options for connecting to your tv:
HdMi and composite video. Select a video option then proceed to Step 2. Make sure your tv is turned on and the correct video input is selected. Option 1: HdMi (recommended) if your tv has an HdMi connection, use an HdMi cable (may not be included) and connect aria to the HdMi iN port on your tv. this connection provides both video and audio so you do not need a separate audio connection. Proceed to connecting tv Source on page 11. delivers the best video & audio quality via a single cable use the diN-to-rca cable provided and connect the yellow cable to the yellow videO iN port on your tv. then proceed to the next step (connecting audio) to con-
nect the red/white cables. Composite Video delivers good picture quality if you have already selected HdMi as your video connection, then do not use this cable. i e d u G t r a t S k c u Q i i a r a M e d a r e c e i i v e r 8 cable is optional and may not be included cable is optional and may not be included r e v i S-videO S-videO i e c e r a d e M a r a i 9 i Q u c k S t a r t G u d e i SteP 2: cONNectiNG audiO SteP 3: cONNectiNG tv SOurce (OPtiONaL) NOTE: if you have already selected HdMi as your video con-
nection, then skip this audio section and proceed to connect-
ing tv Source on page 11. You can connect an rF coaxial cable (sold separately) from aria to either a cable tv or antenna source. Select a tv source and proceed accordingly. use the din-to-rca cable provided and connect the to the aria 9-Pin diN connector and the red and white cables to the audiO iN port on your tv. Option 1 connect to basic unencrypted cable tv Source Option 2 connect to antenna Source (Outdoor or indoor antenna) NOTE: contact your service provider for more details. if you have not selected tv Source, then proceed to connecting Network. i e d u G t r a t S k c u Q i i a r a M e d a r e c e i i v e r 10 S-videO cable is optional and may not be included cable not included r e v i i e c e r a d e M a r a i 11 SteP 4: cONNectiNG NetWOrk SteP 5: POWeriNG uP Select from one of the following networking options. Setting up remote control Option #1 connect to a Wireless Network via a Wireless Network router or access Point NOTE: internal Wi-Fi is an optional feature for the aria Media receiver. Please contact your service provider for the availability and detailed instructions on the wireless network configuration. Option #2 connect to a Wired Network via dSL, cable Modem or Net-
work router cable is optional and may not be included router not included i Q u c k S t a r t G u d e i i a r a M e d a r e c e i i v e r 12 1. Open the battery cover by pressing down on the battery 2. cover latch and sliding it off. insert the batteries, matching the + and - marks on the batteries with the interior of the remote control. 3. Snap on the battery cover to close. i e d u G t r a t S k c u Q i NOTE: refer to the remote control Guide for more details about other remote control features. using ir extender receiver the remote control uses infrared (ir) light signals to control the aria. ir signals cannot go through walls or other solid objects. if the line of sight of your aria is blocked, then you can use the ir extender receiver provided to extend the reach of ir signals from the remote control. r e v i i e c e r a d e M a r a i 13 connecting to Power Source declaration of conformity 1. connect the power cord to the POWer port on the back of the aria. 2. Plug the ac power adapter to a power outlet. 3. Follow the on-screen instructions. NOTE: Make sure your tv is turned on and the correct video input is selected. i Q u c k S t a r t G u d e i i a r a M e d a r e c e i i v e r 14 to ensure proper use of this product, please read this manual carefully and retain it for fu-
ture reference. Should the unit require maintenance, contact an authorized service location. WarNiNG: this symbol indicates the presence of uninsulated dangerous voltage within the products enclosure that constitutes a risk of electric shock. do not open the products case. cautiON: this symbol indicates you must take care; there is risk of damage to the equip-
ment or to yourself. declaration of conformity (europe Only) this product is in conformity with the council directives:
EMC Directive 2004/108/EC Low voltage Directive 2006/95/EC industry canada statement:
this device complies with rSS-210 of the industry canada rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. ce dispositif est conforme la norme cNr-210 dindustrie canada applicable aux appareils radio exempts de licence. Son fonctionnement est sujet aux deux conditions suivantes:
(1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonc-
tionnement indsirable. radiation exposure Statement:
this equipment complies with ic radiation exposure limits set forth for an uncontrolled environment. this equipment should be installed and operated with minimum distance 20cm between the radiator & your body. dclaration dexposition aux radiations:
cet quipement est conforme aux limites dexposition aux rayonnements ic tablies pour un environnement non contrl. cet quipement doit tre install et utilis avec un mini-
mum de 20 cm de distance entre la source de rayonnement et votre corps. i e d u G t r a t S k c u Q i r e v i i e c e r a d e M a r a i 15 i Q u c k S t a r t G u d e i declaration of conformity (continued) Notes to prevent fire or shock hazard, do not expose this product to rain or moisture. to reduce the risk of electric shock, dO NOt remove the cover or back. No user serviceable parts are inside. For servicing refer to qualified personnel. declaration of conformity (united States Only) this device complies with Part 15 of the Fcc rules. Operation is subject to the following conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired opera-
tion. this equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the Federal communication commission (Fcc) rules. these limits are designed to provide reasonable protection against harmful interference in a residential installation. this equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harm-
ful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. if this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment OFF and ON, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment to a different circuit from that to which the receiver is con-
nected. Consult the dealer or an experienced radio/TV technician for help. Fcc caution: any changes or modifications not expressly approved by the party responsi-
ble for compliance could void the users authority to operate this equipment. this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. radiation exposure Statement:
this equipment complies with Fcc radiation exposure limits set forth for an uncontrolled environment. this equipment should be installed and operated with minimum distance 20cm between the radiator & your body. i a r a M e d a r e c e i i v e r 16 i e d u G t r a t S k c u Q i r e v i i e c e r a d e M a r a i 17 2015 entone, inc. entone, aria and connecting the home are trademarks of entone, inc. Other company, product, and service names may be trademarks or service marks of others. all information contained in this document is subject to change without notice. information contained in this document is provided on an as is basis. in no event will entone be liable for damages arising directly or indirectly from any use of the information contained in this document. Subject to change without notice.