FCC ID: 2A2DC-EPICSLATE EPIC Set-Top Box

1. Network

1.1. Wi-Fi

2. Upgrade Steps

1)

Copy OTA zip file into TF card or USB storage device.

Check “Wi-Fi”, System will start scanning available wireless access

Insert HD cable and TF card(USB storage device) with the box.

points around you automatically.

Choose an access point and enter the password.

After authenticating IP address will be given to the box and “connected”

is shown, wireless connection is available now.

Notice: Wi-Fi connection and Ethernet connection are mutually excluded

2) Connect the other side of the HD cable to the TV HD port.

HD Cable

1.2. Ethernet

Click “Ethernet”, box will start DHCP process automatically.

Box will automatically stop Wi-Fi connection and Up Ethernet

connection at the moment when Ethernet jack is plugged in.

When the IP address appears, the network connection is available.

5)

Pressing the reset button and hold until you see the android reboot. And use

the remote to choose “apply update from EXT” choose “Update from TF

card”(choose “Udisk” if USB storage device is applied) choose “xxx.zip

(theupgrade package file)” and press OK.

You will see “—install/ SD card…” It means the box is upgrading.

After upgrade, you can see “Install from SD card complete” at the bottom.

Use remote to choose “reboot system now” and press OK

Or plug the power adapter again to reboot the box.

Upgrade finished. You can see the “Welcome” interface.

Tips: You can check the build number in settings to confirm you have

updated the box successfully.

6)

7)

8)

3)

Insert a stick into the hole below the device .

There is a reset button inside the hole.

And keep pressing the button.

HD Cable

4)

Insert power adapter.

(Still pressing the button)

HD Cable

3. Trouble Shooting

Problem

No power

Solution

-Check if the power adapter is properly connected to the

power and the TV box

-Press the power on the remote controller to turn on the power

-Check if the status led is blue when the box is powered.

No pictures

-Reconnect with HD cable or AV cable

-Check if the TV is switched on

No sound or

distorted sound

-Adjust the volume

-Check that the speakers are connected correctly

No audio or digital

output

-Check the digital connections

-Check if your amplifier is set correctly

The box does not

respond to the

remote control

-Aim the remote directly at the sensor on the front of the TV box

-Reduce the distance to the TV box

-Replace the batteries in the remote control

Player does not

respond to some

operating commands

during playback

No sound during

movies playback

-Operations may not be permitted. Refer to the user manual

-Possibility of system halted, re-insert with power adaptor to restart

the TV box

-The audio codec may not be supported by the TV box. You can

change the supported audio on playing menu.

-Check the volume.

The contents of the

USB flash drive

cannot be read

-The USB flash drive format is not compatible with the box.

-If one of the USB cannot be read. Please turn off the TV box for

30 seconds and restart the TV box

Slow operation of the

USB flash drive

-Big file size or high resolution USB flash drive takes longer time to

read and display on the TV screen.

No sound with HD

connection

The TV screen is

blank and the player

LED is blinking

-Check the connection between the TV and the HD jack of box.

-Check your TV system setup.

-Check the volume

-Turn off your TV box, wait 30 seconds, turn it on again.

-If under HD status, check if HD connection is correct or

change another HD cable set the output resolution of this TV

box into 720p.

User ManualAndroid TV BOXFCCCaution

Thisdevicecomplieswithpart15oftheFCCRules.Operationissubjecttothe

followingtwoconditions:(1)Thisdevicemaynotcauseharmfulinterference,and(2)

thisdevicemustacceptanyinterferencereceived,includinginterferencethatmay

causeundesiredoperation.

AnyChangesormodificationsnotexpresslyapprovedbythepartyresponsiblefor

compliancecouldvoidtheuser'sauthoritytooperatetheequipment.

Note: ThisequipmenthasbeentestedandfoundtocomplywiththelimitsforaClass

Bdigitaldevice,pursuanttopart15oftheFCCRules.Theselimitsaredesignedto

providereasonableprotectionagainstharmfulinterferenceinaresidentialinstallation.

Thisequipmentgeneratesusesandcanradiateradiofrequencyenergyand,ifnot

installedandusedinaccordancewiththeinstructions,maycauseharmfulinterference

toradiocommunications.However,thereisnoguaranteethatinterferencewillnot

occurinaparticularinstallation.Ifthisequipmentdoescauseharmfulinterferenceto

radioortelevisionreception,whichcanbedeterminedbyturningtheequipmentoff

andon,theuserisencouragedtotrytocorrecttheinterferencebyoneormoreofthe

followingmeasures:

-Reorientorrelocatethereceivingantenna.

-Increasetheseparationbetweentheequipmentandreceiver.

-Connecttheequipmentintoanoutletonacircuitdifferentfromthattowhichthe

receiverisconnected.

-Consultthedealeroranexperiencedradio/TVtechnicianforhelp.

ThisequipmentcomplieswithFCCradiationexposurelimitssetforthforan

uncontrolledenvironment.Thisequipmentshouldbeinstalledandoperatedwith

minimumdistance20cmbetweentheradiator&yourbody.

Label Location 40*20mm FCC ID: 2A2DC-EPICSLATE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:(1)This device may not cause harmful interfer ence, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Epic Video Technologies, Inc. Agent Authorization Company: Epic Video Technologies, Inc. Address: 3230 Peachtree Corners Circle Suite H Peachtree Corners, GA 30092 Product Name: EPIC Set-Top Box Model Number(s): EPIC Slate Trademark: Epic FCC ID: 2A2DC-EPICSLATE We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2021/06/22 Signature:

Name:

Wesley Kimmet Title:

Senior Director of Operations Company: Epic Video Technologies, Inc.

Epic Video Technologies, Inc. Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2021/06/22 Subject; Request for Confidentiality FCC ID: 2A2DC-EPICSLATE To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Operational Description SOFTWARE SECURITY REQUIREMENTS FOR U-NII DEVICES In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

User Manual OR For 45 days, pursuant to Public Notice DA 04-1705. For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Wesley Kimmet Title: Senior Director of Operations

Epic Video Technologies, Inc. FCC Software Configuration Control Declaration Date: 2021/06/22 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number:

Regarding FCC Country Code Selection guidelines identified in KDB 594280 D01 Software Configuration Control v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Wesley Kimmet Title: Senior Director of Operations Date: 2021/06/22 Signatureof applicant:

FCC Software Configuration Control Declaration Rev1.1