mN aU Safety Information CAUTION RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.DISPOSE OF USED BATTERIES ACCORDING TO THE INSRRUCTION. Important Safety and Operational Information Please read the following safety and operational instructions before using your earphones and accessories. Please keep these instructions for your reference, Additional warning may be present on the product, packing, or in the User instructions. Please follow the instructions to ensure correct and safe installation and interconnection of the apparatus in multimedia systems. General Operating, storage and charging temperature is 0'C to 40C (32F to 104F), Warnings Exposure to high volume sound levels or excessive sound pressure may cause temporary or permanent damage to your hearing. Although the appropriated volume setting is vary with everyone, you should always use your earphones with the volume set at moderate levels and avoid prolonged exposure to high volume sound levels. The louder the volume, the less time is required before your hearing could be affected. You may experience different sound levels when using your earphone with different devices and setting, If you experience hearing discomfort, please stop listening with your earphones and have your hearing checked by your doctor. 1 ERATO Some advises by hearing experts to protect your hearin 1, Set the volume control in a low position before putting your earphones in your ears and use as low a volume as possible. 2. Avoid turning up the volume to block out noisy surroundings. 3, Limit the amount of time you use earphones at high volume levels. 4, Avoid listening at excessive volume. A simple indication is being unable to hear other people nearby speaking to you. 5, To prevent possible hearing damage, do not listen at high volume levels for long periods, Use the in-ear earphones will impair your ability to hear sounds. Use of such earphones while operating a motor vehicle or riding a bicycle may create a serious hazard to you and/or others, and illegal in most regions. Check local laws regarding use of earphones while driving, If you use the earphones while driving ensure your attention and focus remain on driving safely. Install and use the eartips in accordance with the instructions provided, Do not force eartips down the ear canal. If either becomes lodged in the ear canal, seel medical attention immediately. Ensure eartips and earphones are kept clean and free of ear wax buildup to maintain the specified product performance.
* Applying excessive pressure to the earphones may injure the outer ear. Do not wear the earphones while sleeping or in other situations where pressure may be exerted against the earphones. 2 ERATO
* Do not disassemble or insert anything into the product or charger because this may cause damage to the internal components or cause injure to you. This product is not a toy. Never allow children to play with the product. The earphones, small parts and accessories may bea choking hazard. Charging Warnings Ensure that the voltage rating corresponds to the power supply you intend to use. Please charge by the qualified AC adaptor and/or power source.
* Charge the earphones according to the instructions supplied with the product. Battery Warnings To avoid the risk of explosion, fire or leakage of toxic chemicals, please observe the following warnings
* Do not dispose of the produ heat above 100C.
* Do not attempt to open the earphones, battery or remove the battery. a fire or Recycling:
Your product must be recycled or disposed of properly. Contact your local recycling center for information on proper disposal. CE cscs Europe EU Dedaration of Conformity The equpment complies according toe Rao Equipment and Telecommurications Tema Equppment Drectve 1999/50 Ths equipment meets the folowing conformance standards
{Sey eb ania ztentoront azo oR200 1 Rlsocen 300 2a v1.91 3 ERATO FCC Statements:
This equipment has bean tested and found comply with the limits for a Cass B cligital device, pursuant to part 15 of the FCC Rules. Thase limits are designed to provide reasonable protection against harm Intererence in a residental instalation. This equipment generates, uses and can radiate raiotrequency energy and, ifnot installed and used in accordance with the instructions, may eause harmful interference to acio communications, However there fe no uarantes that Interference il not occur iv a particular installation. I this equipment does cause harmful intrferenee to radio or television reception, which can be determined by tuning the equipment off and on the user is encouraged
{otto corect te interference by ane oF more of the folowing measures: (1) Reorient or relocae the receiving antenna, (2) Increase the separaton between the equipment and reclver. (3) Connect the equipment into an outlet on a cuit eifferent rom hal to which the receWer Is connected, (4) Consult the dealer or an experienced radiorTV technician for help, MODIFICATION: Any changes or modifications not expressly approved by the grantee of his device could vod the user's authority to operate IC Statement:
1. This deviee complies with Industry Canada RSS standard). Operation is subject to te following two conditions: 1) this device may ot cause interference, and (2) this device must accept any Itererence including itererence that may cause undesired operation of the device, 2. Changes or modifications not expressly approved by the party esponsible for compliance could void the user's author to operate the equipment Lepresent apparel est conforme aux CNR industie Canada applicable aux apparels radio Exompts de cance. exploitation est autorisbe aux deux conditions suivantes: (1) fapparel ne doi pas produie de brouilag, t (2) Tuliisateur de Tapparel dot acceptor tout broullage adiolecique sub meme sile broullage est susceptible 'en comprometr le fonetonnement 3: This device is designed to meet the requirements for exposure to radio waves established by the Industral Canada The SAR mit adopted by the Industial Canada is 1.6 Wikg averaged over one gram of tissue. The highest SAR value reperad io the IESD for this device type complies with this mit. The highest SAR value reported fo the IESD for ths device type when using at the ears 0.03Wikg, FCCID:2AHD9-ANMU050000 Complies with 1C:21132-ANMU050000 BAA asec Shee SF Mevcsvoav0x