all | frequencies |
|
exhibits | applications |
---|---|---|---|---|
manual |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 |
|
User manual | Users Manual | 836.16 KiB | ||||
1 2 | Internal Photos | native | ||||||
1 2 | Internal Photos | native | ||||||
1 2 | Internal Photos | native | ||||||
1 2 | External Photos | native | ||||||
1 2 | Block Diagram | |||||||
1 2 | External Photos | native | ||||||
1 2 | Test Setup Photos | native | ||||||
1 2 | External Photos | native | ||||||
1 2 | ID Label/Location Info | |||||||
1 2 | Test Setup Photos | native | ||||||
1 2 | External Photos | native | ||||||
1 2 | Test Report | |||||||
1 2 | Internal Photos | native | ||||||
1 2 | Internal Photos | native | ||||||
1 2 | Internal Photos | native | ||||||
1 2 | Internal Photos | |||||||
1 2 | Cover Letter(s) | June 07 2001 | ||||||
1 2 | Cover Letter(s) | |||||||
1 2 | Operational Description | |||||||
1 2 | Internal Photos | native | ||||||
1 2 | Internal Photos | native | ||||||
1 2 | Cover Letter(s) | March 08 2001 | ||||||
1 2 | Test Report | March 08 2001 | ||||||
1 2 | Attestation Statements | June 07 2001 | ||||||
1 2 | Attestation Statements | June 07 2001 | ||||||
1 2 | Test Report | March 08 2001 | ||||||
1 2 | Cover Letter(s) | |||||||
1 2 | RF Exposure Info | |||||||
1 2 | Test Setup Photos | |||||||
1 2 | Test Report | June 07 2001 |
1 2 | User manual | Users Manual | 836.16 KiB |
blip C11 Users Manual EN/LZN 901 0047 P1C blip C11 First edition (March 2001) This manual is published by Ericsson Business Innovation AB, without any warranty. Improvements and changes to this manual necessitated by typhographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Ericsson Business Innovation AB at any time and without notice. Such changes will, however, be incorporated into new editions of this manual. All rights reserved. Ericsson Business Innovation AB, 2001 Publication number: EN/LZN 901 0047 P1C CE Symbol The CE symbol on our product signifies that it has been certified according to the standards ETS 300 328, ETS 300 826, EN 60950, EN 60215, following the provisions of Radio Equipment and Telecommunication Equipment directive 1995/5/EEC, EMC directive 89/336/EEC, and Low voltage directive 73/23/EEC. Limitations on Use of Bluetooth Wireless Technology1 France, Israel, Korea, Mexico, Singapore, Venezuela: The use of Bluetooth equipment is not allowed, due to limitations on the use of the frequency band 2,400-2,483.5. Italy, Mexico, Thailand: the use of Bluetooth equipment outdoors is not allowed. Colombia, Honduras, Indonesia, Thailand: The connection of Bluetooth equipment to PSTN is not allowed. Japan: The Frequency bandwidth of this equipment is also used by radio stations and industrial, scientific and medical equipment, for example factory production lines. Please make sure that no such equipment is being used nearby, before you start using this equipment. If radio frequency interference occurs, please stop using this equipment immediately. 1. BLUETOOTH trademarks are owned by Bluetooth SIG, Inc. U.S.A. and used by Ericsson under license. Waivers This product has been developed and manufactured to fulfil the blutetooth specification to ensure maximum performance and interoperability. One specification point has been waived, see #203-02-010r at www.bluetooth.com. This does not affect normal use of the blip C11. The Bluetooth Vision This product incorporates Bluetooth wireless technology which makes it possible to connect any compatible portable and stationary communications device without using cables. The technology is based on a radio link that offers fast and reliable transmission of voice and data. It does not require a line-of-sight connection in order to establish communication. Bluetooth wireless technology uses a globally available frequency range intended to ensure communication compatibility worldwide. Please refer to www.bluetooth.com for the latest information. Contents 1 2 3 4 5 6 Introduction........................................................................................... 1 1.1 What is BLIP? .................................................................................1 1.2 This Manual ....................................................................................2 1.3 System Requirements ....................................................................3 1.3.1 Hardware Requirements.......................................................................... 3 1.3.2 Operating System.................................................................................... 3 Getting Started...................................................................................... 4 2.1 Using Serial Connection .................................................................4 2.2 Using Ethernet Connection .............................................................5 BLIP Manager ....................................................................................... 7 3.1 Introduction ....................................................................................7 3.2 Installation ......................................................................................8 3.2.1 Windows NT4.......................................................................................... 8 3.2.2 Windows 98SE........................................................................................ 9 3.2.3 Windows 2000 ...................................................................................... 10 3.3 Settings ........................................................................................11 3.4 Serial Connection .........................................................................12 3.5 Configure your BLIP .....................................................................13 3.6 Ethernet Connection .....................................................................15 3.7 Upload to the BLIP .......................................................................17 3.7.1 Upload Applications .............................................................................. 17 3.7.2 Upload Content ..................................................................................... 18 3.8 Download from the BLIP ...............................................................19 3.8.1 Download Content ................................................................................ 19 3.8.2 Download Dynamic Data ....................................................................... 20 Applications ........................................................................................ 22 4.1 Infotainment Access Point ............................................................22 4.1.1 Upload the IAP ...................................................................................... 23 4.1.2 Creating Content ................................................................................... 23 4.1.3 Locations .............................................................................................. 24 4.1.4 Connecting to the BLIP ......................................................................... 25 4.2 Create Your Own Applications ......................................................25 Future Developer? .............................................................................. 26 Technical Specification ...................................................................... 27 6.1 Features .......................................................................................27 6.2 Function .......................................................................................27 6.3 Technical specification ..................................................................28 Contents 7 Warranty .............................................................................................. 30 8 9 Guidelines for Safe and Efficient Use ................................................ 32 Licence Agreement............................................................................. 36 10 Declaration of Conformity .................................................................. 39 1 Introduction Congratulations on your new purchase!
This package contains everything you need to convey your message to the crowd, and you will have the system up and running in a few minutes!
1.1 What is BLIP?
Bluetooth Local Infotainment Point (BLIP) is a location oriented service device which provides local information through Bluetooth wireless technology1. Users entering a BLIP equipped area can access information through Bluetooth equipped terminals, for example their cellular phones or Personal Digital Assistants
(PDA). BLIP can do whatever its owners program it to do. Thanks to the open software platform, its only limits are your imagination and programming skills. The blip C11is equipped with a number of basic applications, forming a foundation for further development. The Infotainment Access Point (IAP) application makes the BLIP accessible for all types of network communication. The data content can be stored locally on a standalone BLIP, or on a network reachable from the BLIP, for example the Internet. Network data is accessed through a Network File Server (NFS). BLIP presents many new ways of developing business. Examples of these include:
Suppliers are able to send information to their customers about products displayed in the store window Customers can request further details about the presented products by sending their contact information to the BLIP. Travel information and timetables can be transmitted to users waiting for the bus. As new BLIP applications are developed, new possibilities will emerge, opening up new business opportunities and creating extra value to BLIP customers. 1. BLUETOOTH trademarks are owned by Bluetooth SIG, Inc. U.S.A. and used by Ericsson under license 1 Introduction 1.2 This Manual The instructions of this manual will help you install and manage your blip C11. Note! You should read chapter 7 - Warranty, and chapter 8 - Guidelines for Safe and Efficient Use before using your product. This manual is available as an on-line publication, as well as in a printable PDF-version. Both versions are delivered together with the blip C11 and can be found on the CD enclosed in the blip C11 product package. The instructions of this manual will help you install and manage your blip C11. In this manual, the blip C11 is referred to as BLIP, if nothing else is stated. The chapters of this manual are the following:
Chapter 1: Introduction provides an overview of the BLIP concept and outlines hardware and software requirements. Chapter 2: Getting Started outlines step-by-step instructions on connecting your BLIP to your PC. Chapter 3: BLIP Manager provides instructions on using the BLIP Manager software. The BLIP Manager makes it easy for you to transfer applications and data content to and from your BLIP or BLIPs. Chapter 4: Applications provides information about BLIP applications, and instructions on how to use the applications delivered together with the BLIP. Chapter 5: Future Developer? This chapter provides information about how to become a future developer of BLIP applications. Chapter 6: Technical Specification covers the functions and technical specifications of the BLIP. Chapter 7: Warranty provides warranty terms and conditions, as well as information on what to do if your BLIP fails to operate. Chapter 8: Guidelines for Safe and Efficient Use provides guidelines for product care, and safe and efficient use. Chapter 9: Licence Agreement contains licence agreement information for the software delivered togehter with the BLIP. Chapter 10: Declaration of Conformity 2 Introduction 1.3 System Requirements 1.3.1 Hardware Requirements The following hardware requirements apply to the host computer:
3URFHVVRU 5$0 Pentium 150 MHz or better 64 MB or better (32MB with Windows 98SE)
+DUGGLVNVSDFH
>10 MB
,QWHUIDFHV 2WKHU Serial and/or Ethernet CD-ROM drive 1.3.2 Operating System The host computer must be running either of the operating systems:
Windows 2000 professional, SP1 or later Windows NT4 SP4 or later Windows 98SE 3 2 Getting Started 2.1 Using Serial Connection 1. Unpack the BLIP and connect the serial cable between the BLIP and the serial RS232 connector on your PC. 2. Connect the AC power adapter between the BLIP device and the wall socket. Note that the mains plug may look different depending on the mains socket in your country. Do not connect the plug to any other item than the AC power adapter. It must not be separated from the adapter when plugged into the wall socket. 4 Getting Started 3. 4. Install the BLIP Manager as described in section 3.2 - Installation. Start the BLIP Manager provided on the CD. See section 3.4 - Serial Connection for more instructions on how to configure the BLIP. 2.2 Using Ethernet Connection To be able to use the Ethernet connection, you must set up the network connection preferences using the BLIP Manager. 1. 2. 3. 4. Connect your BLIP using the serial interface, as shown in section 2.1 -
Using Serial Connection. Start the BLIP Manager and set up the network connection preferences as described in section 3.5 - Configure your BLIP. Disconnect the power cable and the serial cable from the BLIP Connect the Ehternet cable between the BLIP and the network Ethernet interface on your PC. 5 Getting Started 5. Connect the AC power adapter between the BLIP device and the wall socket. Note that the mains plug may look different depending on the mains socket in your country. Do not connect the plug to any other item than the AC power adapter. It must not be separated from the adapter when plugged into the wall socket. 6 3 BLIP Manager With the BLIP Manager installed, you can easily handle information on all your BLIPs!
3.1 Introduction 7KH%/,30DQDJHUVXSSRUWV\RXLQWKHIROORZLQJWDVNV Load application software to the BLIP from the host computer Load content to and from the BLIP, for instance HTML pages Load data from the BLIP to the host computer, for instance business cards left by users Administer a list of the BLIPs connected to the network
,QWKHOHIWZLQGRZRIWKH%/,30DQDJHU\RXZLOOILQGWKHFRQWHQWRIWKHILOHVDQG IROGHUV\RXVSHFLI\RQ\RXUKRVWFRPSXWHUDQGLQWKHULJKWZLQGRZ\RXZLOOILQG
\RXU%/,3RU%/,3VSUHVHQWHGJUDSKLFDOO\
$SSOLFDWLRQDQGGDWDFDQEHWUDQVIHUUHGWRWKH%/,3IURPWKHKRVWFRPSXWHUE\WKH GUDJDQGGURSPHWKRG 7 BLIP Manager 3.2 Installation Run the BLIP Manager setup from the CD. 3.2.1 Windows NT4 Install Remote Access Services (RAS) RAS is used for dial-up networking. If you dont have Remote Access Services
(RAS) installed, install it from your Windows NT CD. Install a NULL Modem 1. 2. 3. 4. 5. 6. 7. Select Start Settings Control Panel. Doubleclick on the Modem icon. Click Add... Check the Dont detect my modem; I will select it from a list box, and click Next. Select NULL Modem Types from the Manufacturers list Select RAS Serial Cable between 2 PCs from the Models list, and click Next. Select one COM port, click Next and then Finish. Create a dial-up network connection 1. 2. 3. 4. 5. 6. 7. 8. Select Start Accessories Dial-Up Networking, and click New. Name the connection "BLIP". Check the I know all about phonebook entries and would rather edit the properties directly box, and click Finish. Select the RAS Serial Cable between 2 PCs in the Dial Using list. Uncheck the Use another port if busy box. Select the Server tab, and choose PPP; Windows NT, Windows 95 Plus, Internet as dial-up server type. Network protocols should be TCP/IP. Click on TCP/IP Settings, and select the Server assigned IP address radio button. Make sure that the Use default gateway on remote network box is unchecked!
Click OK, and then Security. Select the Accept any authentication including clear text radio button. Click Ok, and then click Close. Start the BLIP Manager. Select Start BLIP Manager to start the BLIP Manager. Select settings from the main menu, and continue with section 3.3 - Settings. 8 BLIP Manager 3.2.2 Windows 98SE Install Remote Access Services (RAS) RAS is used for dial-up networking. If you dont have Remote Access Services
(RAS) installed, install it from your Windows 98 CD. Install a NULL Modem 1. 2. 3. 4. 5. 6. 7. Select Start Settings Control Panel. Doubleclick on the Modem icon. Click Add... Check the Dont detect my modem; I will select it from a list box, and click Next. Select NULL Modem Types from the Manufacturers list Select RAS Serial Cable between 2 PCs from the Models list, and click Next. Select one COM port, click Next and then Finish. Create a dial-up network connection 1. 2. 3. 4. 5. 6. 7. 8. Select Start Accessories Communication Dial-Up Networking, and doubleclick on Make new connection. Name the connection "BLIP". Select the RAS Serial Cable between 2 PCs in the Select a device list, and click Next. Even though the telephone number is not used, you have to type at least one digit to be able to continue. Click Next and then Finish. Rightclick on the "BLIP" connection you just created, and select Properties from the pop-up menu. Select the Server Types tab, and uncheck NetBEUI and IPX/SPX compatible in the Allowed network protocols section. Click on TCP/IP Settings. Make sure that the Use default gateway on remote network box is unchecked!
9. Click OK, and then OK again. Start the BLIP Manager. Select Start BLIP Manager to start the BLIP Manager. Select settings from the main menu, and continue with section 3.3 - Settings. 9 BLIP Manager 3.2.3 Windows 2000 Install Remote Access Services (RAS) RAS is used for dial-up networking. If you dont have Remote Access Services
(RAS) installed, install it from your Windows 2000 CD. Install a NULL Modem Note that you may be required to have administrator rights to install a modem!
1. 2. 3. 4. 5. 6. 7. 8. Select Start Settings Control Panel. Doubleclick on the Phone and Modem Options icon. Click Add... Check the Dont detect my modem; I will select it from a list box, and click Next. Select NULL Modem Types from the Manufacturers list Select RAS Serial Cable between 2 PCs from the Models list, and click Next. Select one COM port, and then click Next. If the dialogue window Digital Signature Not Found is shown, just click Yes. Click Finish, and then OK to close the Phone and Modem Options window. Create a dial-up network connection 1. 2. 3. 4. 5. 6. 7. 8. 9. Select Start Settings Control Panel. Doubleclick on Network and Dial-up Connections, then doubleclick on Make new connection, and the click Next. Select Dial up to private network, click Next, and then click Next again (no phone number is needed). Name the connection "BLIP", and click Finish. There will now be a dialogue called Connect BLIP on your screen. Click Properties in the Connect BLIP dialogue, and check that Modem-RAS Serial Cable between 2 PCs is stated in the Connect using field. Click Configure and set Maximum speed to 115 200. Check the Enable hardware flow control box, and click OK. Uncheck the Client for Microsoft Networks box. Click on Internet protocol (TCP/IP), and then Properties. Make sure that the Use default gateway on remote network box is unchecked!
10. Click OK in the following three dialogue windows. Start the BLIP Manager. Select Start BLIP Manager to start the BLIP Manager. Select settings from the main menu, and continue with section 3.3 - Settings. 10 BLIP Manager 3.3 Settings 7KH%/,30DQDJHU6HWWLQJVDUHXVHGWRFKDQJHWKHGHIDXOWVHWWLQJVIRUWKHIROGHUV LQZKLFK\RXVWRUH\RXUDSSOLFDWLRQVFRQWHQWDQGG\QDPLFGDWDRQ\RXUKRVW FRPSXWHUIt also shows your default connection. 7RFKDQJHWKHVHWWLQJVRI\RXU%/,30DQDJHUFKRRVH6HWWLQJVDQGWKH6HWWLQJV ZLQGRZZLOODSSHDU 7RGHILQH\RXUIROGHUVZULWHWKHFRPSOHWHIROGHUDGGUHVVLQWKHDGGUHVVILHOGRU FOLFNWKH%URZVHEXWWRQDQGVHOHFWWKHSUHIHUUHGIROGHU
$SSOLFDWLRQ5RRW)ROGHU
&RQWHQW5RRW)ROGHU 7KHIROGHURQ\RXUKRVWFRPSXWHUZKHUH\RX
VWRUH\RXU%/,3DSSOLFDWLRQV
7KHIROGHURQ\RXUKRVWFRPSXWHUZKHUH\RX
VWRUHFRQWHQWWRORDGWR\RXU%/,3
'RZQORDG&RQWHQW'HIDXOW
)ROGHU 7KHIROGHURQ\RXUKRVWFRPSXWHUZKHUH\RX
VWRUHFRQWHQWORDGHGIURP\RXU%/,3
'RZQORDG'\QDPLF'DWD'HIDXOW
)ROGHU 7KHIROGHURQ\RXUKRVWFRPSXWHUZKHUH\RX
VWRUHG\QDPLFGDWDORDGHGIURP\RXU%/,3
6DYHLQIRILOHLQ
'HIDXOW&RQQHFWLRQ 7KHIROGHURQ\RXUKRVWFRPSXWHUZKHUHLQIR
ILOHVDERXW\RXU%/,3RSHUDWLRQVZLOOEHVWRUHG
6KRXOGEHWKHGLDOXSFRQQHFWLRQGHILQHGLQ
WKHLQVWDOODWLRQSURFHVVDVGHVFULEHGLQ
VHFWLRQ,QVWDOODWLRQ
3UHVV2.ZKHQDOOIROGHUVDUHGHILQHG 11 BLIP Manager 3.4 Serial Connection Before you connect to your blip, make sure your default connection is the dial-up connection defined in the installation process, as described in section 3.2 - Installation. Information about how to choose your default connection can be found in section 3.3 - Settings. 6HOHFWWKH6HULDOWDEWRRSHQWKH6HULDOZLQGRZ 3UHVVWKH&RQQHFWEXWWRQDQG\RXUFRQQHFWHG%/,3ZLOODSSHDUDVDQLFRQLQWKH 6HULDOZLQGRZ
,IWKH%/,3GRHVQRWDSSHDUDVDQLFRQRUDSSHDUDVDUHGFURVVHGRXW%/,3LFRQ FKHFN\RXUFRQQHFWHGFDEOHVDVGHVFULEHGLQVHFWLRQ8VLQJ6HULDO
&RQQHFWLRQ
<RXFDQFKHFNWKHSURSHUWLHVRI\RXU%/,3E\ULJKWFOLFNLQJWKH%/,3LFRQDQG FKRRVLQJ3URSHUWLHV 7KLVZLOORSHQWKH3URSHUWLHVZLQGRZ 12 BLIP Manager 7KHGHIDXOWQDPHRI\RXU%/,3LVWKH%/,3LQGLYLGXDOQXPEHU7KHLQGLYLGXDO QXPEHULVXQLTXHWRWKH%/,3DQGLVDOVRSULQWHGRQWKHODEHORQWKH%/,3 8
:KHQ\RXKLJKOLJKWWKH%/,3LFRQ\RXZLOOILQGLQIRUPDWLRQDERXW
\RXU%/,3VLQGLYLGXDOQXPEHURUQDPHDQGLWVDSSOLFDWLRQLQWKH
ORZHUULJKWFRUQHURIWKH%/,30DQDJHU
,I\RXOLNHWRFKDQJHWKHQDPHRI\RXU%/,3ULJKWFOLFNDWWKH%/,3LFRQDQGFKRRVH 5HQDPH%/,3
<RXUFKDQJHVDUHDXWRPDWLFDOO\VDYHGEXW\RXFDQDOVRVDYHE\FKRRVLQJ6DYH IURPWKH)LOHPHQX 7KHUHDUHWZRSK\VLFDOFRQQHFWLRQSRVVLELOLWLHVRI\RXU%/,3 If you would like to keep your BLIP as a single serial connected BLIP, continue with section 3.3 - Settings. If you like to connect your BLIP to a network, keep the BLIP at serial connection and continue with section 3.5 - Configure your BLIP. 3.5 Configure your BLIP 7RVHW+&3RUVWDWLF,3IRU\RXU%/,3ULJKWFOLFNDWWKH%/,3LFRQDQGFKRRVH
&RQILJXUH%/,3 13 BLIP Manager 7KLVZLOORSHQWKH&RQILJXUH%/,3ZLQGRZ 8VH+&3WRJHW,3DGGUHVV 7KLVLVWKHGHIDXOWRSWLRQ:KHQWKHk8VH+&3WRJHW,3DGGUHVVyER[LVFKHFNHG WKH%/,3DXWRPDWLFDOO\UHFHLYHVDQ,3QXPEHUIURPWKHQHWZRUNVHUYHU
,3DGGUHVVDQG1HWPDVN
:KHQWKHk8VH+&3WRJHW,3DGGUHVVyER[LVQRWFKHFNHGDVWDWLF,3DGGUHVV FDQEHVSHFLILHGLQWKH,3DGGUHVVILHOGV7KHV\VWHPZLOOVXJJHVWDQHWPDVNWKDW ZLOOZRUNZLWK\RXUFKRVHQ,3DGGUHVV&RQWDFW\RXUV\VWHPDGPLQLVWUDWRUIRU IXUWKHUGHWDLOVUHJDUGLQJWKHQHWPDVN 8VH*DWHZD\
7KH%/,3PXVWNQRZZKLFKFRPSXWHURQWKHORFDOQHWZRUNWKDWLVXVHGDVD JDWHZD\LQRUGHUWRFRQQHFWWRWKH,QWHUQHWWKURXJKWKH%/,3:KHQWKHk8VH
*DWHZD\yER[LVFKHFNHG\RXFDQVSHFLI\WKH,3DGGUHVVIRUWKH,QWHUQHWJDWHZD\ 14 BLIP Manager 3.6 Ethernet Connection
&KHFNWKDW\RXU%/,3RU%/,3VDUHFRQQHFWHGWRDQHWZRUNXVLQJWKH(WKHUQHW LQWHUIDFHDVGHVFULEHGLQVHFWLRQ8VLQJ(WKHUQHW&RQQHFWLRQ 7KH%/,30DQDJHUVHDUFKHVIRU%/,3VFRQQHFWHGWRWKHVDPHVXEQHW7KLVPHDQV WKDWLIWKHUHLVDURXWHUVLWXDWHGEHWZHHQWKH%/,30DQDJHUDQGD%/,3WKLV%/,3 ZLOOQRWEHIRXQG 6HOHFWWKH1HWZRUNWDEWRRSHQWKH1HWZRUNZLQGRZ
<RXUFRQQHFWHG%/,3RU%/,3VZLOODSSHDUDVLFRQVLQWKH1HWZRUNZLQGRZ
,IRQHRUVHYHUDORI\RXU%/,3VGRQRWDSSHDULQWKH1HWZRUN:LQGRZRUDSSHDU DVUHGFURVVHGRXW%/,3LFRQVPDNHVXUHWKDWWKHPLVVLQJ%/,3RU%/,3VDUH SURSHUO\FRQQHFWHGWRWKHHWKHUQHWLQWHUIDFHDQGSRZHU
$OVRFKHFNLI\RXU+&3RUVWDWLF,3VHWXSLVFRUUHFWDVGHVFULEHGLQVHFWLRQ
&RQILJXUH\RXU%/,3
<RXFDQFKHFNWKHQDPHVDQGRWKHUSURSHUWLHVRI\RXU%/,3VE\ULJKWFOLFNLQJD
%/,3LFRQDQGFKRRVH3URSHUWLHV 7KLVZLOORSHQWKH3URSHUWLHVZLQGRZ 15 BLIP Manager 7KHGHIDXOWQDPHRI\RXU%/,3LVWKH%/,3LQGLYLGXDOQXPEHU7KHLQGLYLGXDO QXPEHULVXQLTXHWRWKH%/,3DQGLVDOVRSULQWHGRQWKHODEHORQWKH%/,3 8
:KHQ\RXKLJKOLJKWD%/,3LFRQ\RXZLOOILQGLQIRUPDWLRQDERXW
WKH%/,3VLQGLYLGXDOQXPEHURUQDPHDQGLWVDSSOLFDWLRQLQWKH
ORZHUULJKWFRUQHURIWKH%/,30DQDJHU
5LJKWFOLFNDWD%/,3LFRQDQGFKRRVH5HQDPH%/,3LI\RXOLNHWRFKDQJHWKHQDPH RID%/,3
<RXUFKDQJHVDUHDXWRPDWLFDOO\VDYHGEXW\RXFDQDOVREHVDYHE\FKRRVLQJ6DYH IURPWKH)LOHPHQX 7KH%/,30DQDJHUDOVRPDNHVLWSRVVLEOHIRU\RXWRJURXS\RXU%/,3VE\FUHDWLQJ IROGHUV-XVWULJKWFOLFNLQWKH1HWZRUNZLQGRZDQGFKRRVH&UHDWHDQGWKHQ1HZ
)ROGHU5LJKWFOLFNRQWKHQHZIROGHUDQGFKRRVH5HQDPHLI\RXZRXOGOLNHWR FKDQJHLWVQDPH 16 BLIP Manager
<RXFDQRUJDQL]H\RXU%/,3VLQWR\RXUFUHDWHG%/,3IROGHUVDV\RXOLNHE\XVLQJ WKHGUDJDQGGURSPHWKRG 3.7 Upload to the BLIP 7KLVVHFWLRQSURYLGHVLQIRUPDWLRQRQKRZWRWUDQVIHUDSSOLFDWLRQVDQGFRQWHQWIURP
\RXUKRVWFRPSXWHUWRRQHRUVHYHUDO%/,3VUHIHUUHGWRDVDQXSORDG 1RWHWKDWHDFKWLPHDQHZDSSOLFDWLRQRUQHZFRQWHQWLVXSORDGHGWRWKH%/,3WKH FXUUHQWDSSOLFDWLRQRUFRQWHQWZLOOEHRYHUZULWWHQ 3.7.1 Upload Applications 6HOHFWDQDSSOLFDWLRQRQ\RXUKRVWFRPSXWHU 1. Choose the $SSOLFDWLRQ tab to open the Application window. The names of the applications stored in the Application Root Folder will appear in the Application window (to define the Application Root Folder see section 3.3 - Settings). To select an application to upload, click its name to highlight it. 2. 6HOHFWWKH%/,3RU%/,3VIRU\RXUDSSOLFDWLRQ To select a BLIP for uploading, click a BLIP icon in the Serial/Network window
(depending on your connection) to highlight it. To select multiple BLIPs, organize the BLIPS into a folder and highlight it. The application will be uploaded to the selected BLIP, or to all BLIPs in a selected folder. 3. 8SORDGWKHDSSOLFDWLRQ 17 BLIP Manager Right click on the highlighted BLIP or BLIP folder. Select 8SORDG$SSOLFDWLRQto load the application to the BLIP or BLIPs. 8
<RXFDQXVHWKHGUDJDQGGURSPHWKRGWRXSORDGDSSOLFDWLRQV
&OLFNDQGKROGWKHPRXVHEXWWRQRQDQDSSOLFDWLRQLQWKH
$SSOLFDWLRQZLQGRZGUDJLWWRWKHVHOHFWHG%/,3RU%/,3IROGHU
DQGUHOHDVHWKHPRXVHEXWWRQ
3.7.2 Upload Content 1. 6HOHFWWKHFRQWHQWRQ\RXUKRVWFRPSXWHU Choose the Content tab to open the Content window. The names of the content stored in the Content Root Folder will appear in the Content window (to define the Content Root Folder see section 3.3 - Settings). To select content to upload, click its name to highlight it. 2. 6HOHFWWKH%/,3RU%/,3VIRU\RXUFRQWHQW To select a BLIP for uploading, click a BLIP icon in the Serial/Network window
(depending on your connection) to highlight it. To select multiple BLIPs, organize the BLIPS into a folder and highlight it. The content will be uploaded to the selected BLIP, or to all BLIPs in a selected folder. 3. Upload the content. Right click on the highlighted BLIP or BLIP folder. Select 8SORDG&RQWHQW to load the content to the BLIP or BLIPs. 18 BLIP Manager 8
<RXFDQXVHWKHGUDJDQGGURSPHWKRGWRXSORDGFRQWHQW
&OLFNDQGKROGWKHPRXVHEXWWRQRQDQDSSOLFDWLRQLQWKH
DSSOLFDWLRQ:LQGRZGUDJLWWRWKHVHOHFWHG%/,3RU%/,3IROGHU
DQGUHOHDVHWKHPRXVHEXWWRQ
3.8 Download from the BLIP 7KLVVHFWLRQWHOOV\RXKRZWRWUDQVIHUILOHVIURPRQHRUVHYHUDO%/,3VWR\RXUKRVW FRPSXWHUUHIHUUHGWRDVDGRZQORDG 3.8.1 Download Content 1. Select the BLIP to load content from. To select a BLIP to download content from, click a BLIP icon in the Serial/Network window (depending on your connection) to highlight it. To select several BLIPs at the same time, organize the BLIPS into a folder and highlight it. 2. RZQORDGWKHFRQWHQW Right click on the highlighted BLIP. Select RZQORDG&RQWHQW to load the content to the Download Content Default Folder (to define the Download Content Default Folder see section 3.3 - Settings). When downloading content from mulitple BLIPs organized into a folder, the content will be saved into subfolders named as the individual BLIPs under the Download Content Default Folder. 19 BLIP Manager 3.8.2 Download Dynamic Data 1. 6HOHFWWKH%/,3WRORDGG\QDPLFGDWDIURP 7RVHOHFWD%/,3WRGRZQORDGG\QDPLFGDWDIURPFOLFND%/,3LFRQLQWKH 6HULDO1HWZRUNZLQGRZGHSHQGVRQ\RXUFRQQHFWLRQWRKLJKOLJKWLWTo select several BLIPs at the same time, organize the BLIPS into a folder and highlight it. 2. RZQORDGWKHG\QDPLFGDWD 5LJKWFOLFNRQWKHKLJKOLJKWHG%/,36HOHFWRZQORDG\QDPLFDWDWRORDGWKH G\QDPLFGDWDWRWKHRZQORDG\QDPLFDWDHIDXOW)ROGHUWRGHILQHWKH RZQORDG\QDPLFDWDHIDXOW)ROGHUVHHsection 3.3 - SettingsWhen downloading dynamic data from mulitple BLIPs organized into a folder, the data will be saved into subfolders named as the individual BLIPs under the Download Dynamic Data Default Folder. 20 BLIP Manager 21 4 Applications This chapter describes the applications delivered together with the BLIP and how to use them. 4.1 Infotainment Access Point The IAP implements a so called LAN access point. This means that all of the functions you normally can access via your network, also can be accessed through the IAP (provided that the terminal has these capabilities). The IAP application makes it possible for a user to browse through HTML and WMLC (the WML binary format) data. The Infotainment Access Point (IAP) application makes the BLIP accessible for all types of network communication. For example, if you have a Bluetooth terminal capable of displaying streaming video, the IAP application can be used to stream the video data. For example, it would be possible to send data to a printer from a terminal using a BLIP with IAP installed. The area where the BLIP is present will transform into an Infotainment Access Point!
You can use Common Gateway Interface (CGI) scripts together with data and graphics, which gives the possibility to make the user interact with the BLIP. 8 Using CGI scripts, you can now get valuable input from the user via your BLIP site. The user can interact with the BLIP and submit data to your applications. The HTML/WMLC content and CGI scripts are usually stored locally on a standalone BLIP, but contents and scripts can also be stored on a network reachable from the BLIP, for example the Internet. Possible storage locations include:
Local - Locally in the BLIP Network - On a local network connected to the BLIP Internet - On a computer connected to the Internet and the BLIP 22 Applications 4.1.1 Upload the IAP Make sure that the Internet Access Point application is uploaded to the BLIP. See section 3.7.1 - Upload Applications for more information on how to upload an application to the BLIP using the BLIP. 4.1.2 Creating Content After uploading the IAP, the BLIP will contain default HTML and WMLC content, which makes it possible to test the application with a device using the Bluetooth wireless technology. You can now create your own HTML pages, WMLC pages, and CGI scripts and make them accessible for the user when browsing the site content!
Application Configuration IP addresses for both the BLIP and the terminal is handed out by the BLIP when the terminal connects to the BLIP. The IP address that the BLIP assigns to itself is the IP address that the terminal has to use to access locally stored information. There is a default address, but it can also be configured by editing the text file
/blip/cfg/info_access_point.cfg before the Infotainment Access Point application is downloaded to the BLIP using the BLIP Manager. The configuration file is a ASCII text file with the following parameters:
3DUDPHWHU
'HVFULSWLRQ DSSOLFDWLRQBQDPH Server name - The name that the BLIP is using to contact terminals EOLSBLS Network address - The network address that the BLIP assigns to itself during the connection to a terminal ZDSBKRPHBXUO Homepage URL - Used only for WAP, this is the WAP start page for the terminal This is an example of how a configuration file may look:
application_name = Store window BLIP blip_ip = 192.168.100.1 wap_home_url = index.wmlc Edit the file using a text editor, e.g. Notepad. If the file is absent, the default values are:
application_name = Infotainment Access Point blip_ip = 192.168.1.1 wap_home_url = index.wmlc 23 Applications WML Compile your WML files to the binary WMLC format using a common WAP compiler. A compiler can be obtained through Ericsson Developers Zone at http://www.ericsson.com/developerszone. CGI Scripts CGI scripts gives the possibility to make the user interact with the BLIP. CGI Scripts can be run together with HTML and WAP 4.1.3 Locations Local When creating the content, you must place your files in the following directory structure on your PC:
The folders in the directory can contain the following:
GDW FJL HTML files WMLC files Graphics files CGI scripts Use the BLIP Manager to upload the directory structure to the BLIP. Refer to section 3.7.2 - Upload Content for more information. Network Network data is accessed through a Network File Server (NFS). To be able to create and use content on a network connected to the BLIP, you must edit the Linux script file rc.app. The file is located in the \blip\cfg directory on your computer (provided that the Infotainment Access Point is properly installed from the CD to the application directory on your PC). This file is preferably updated while situated on the PC, but it is possible to edit the file directly on the BLIP. The file is located in the /blip/cfg directory on the BLIP. 24 Applications 1. Add the following line to rc.app using a text editor (e.g. Notepad):
mount -t nfs IP_ADDRESS:DIR /usr
,3B$''5(66 The IP address of the network server withholding the data content
',5 The directory on the network server that contains the HTML/WML/CGI content. Write for example the following:
mount -t nfs 10.2.4.14:/home/blip/content /usr 2. Add the following line to rc.app to put a link in /blip/dat in order to make the web server look for the content on the nfs-mounted disk:
ln -s /usr /blip/dat/network To reach data on the network server, write for example the following:
110.2.4.14/network/index.html Internet Internet configuration is currently unavailable. 4.1.4 Connecting to the BLIP Refer to the documentation supplied by the terminal manufacturer for more information on how to connect to the BLIP using a Bluetooth terminal. 4.2 Create Your Own Applications Would you like to create your own BLIP application? See section 5 - Future Developer? for more information about how to become a future developer of BLIP applications. 25 5 Future Developer?
Are you a future developer?
Visit Ericssons Developers Zone at http://www.ericsson.com/developerszone and discover how to write applications for your BLIP!
The Ericsson Developers Zone is the site for product, service and application developers as well as content providers. You'll get valuable information as a member to Ericsson Developers Zone. Welcome to share our knowledge!
26 6 Technical Specification 6.1 Features The blip C11 provides the following main features:
Stand-alone processing and data storage capacity General purpose LED for indication of different conditions Wide voltage range battery eliminator power input Convenient size Can be mounted standing, lying, or mounted on the wall High quality design, associating high technology information devices with the traditional shape of a rune stone Possibility to connect to LANs and the Internet 6.2 Function The main functions of blip C11 are the following:
A palm-sized, stand-alone server for sending information to terminals that enter the area of reception for Bluetooth communication Many applications for the BLIP device will be created by third party developers Applications and data may be downloaded from a standard PC 27 Technical Specification 6.3 Technical specification Electrical Data, Capacity 6XSSO\YROWDJH 4,5 - 15 V DC 2SHUDWLQJFXUUHQWFRQVXPSWLRQ
<300 mA 0HPRU\FDSDFLW\
2 MByte RAM, 2 MByte FLASH 3URFHVVLQJFDSDFLW\
ARM7 TDMI-based 32-bit RISC at 22.5 MHz Bluetooth Interface
%OXHWRRWKVWDQGDUG 1.0b, Class 2 (0 dBm) 5DQJH
)UHTXHQF\
$QWHQQD
~10 m ISM band (2,4 GHz), 79 frequency hops Internal 2.4 GHz Bluetooth antenna Hardware Interface 6HULDOVSHHGVHWWLQJV Up to 115200 bps 6HULDOFRQQHFWLRQ
(WKHUQHW
3RZHUDGDSWHU 0LVFHOODQHRXV Mechanical Data Serial RS232, 9-pin female D-sub, pin-configured as DCE RJ-45 (10-baseT) 10 Mbps interface DC-adapter, 2.1 mm pin connector One general purpose LED (green)
'LPHQVLRQV+[:['
117 x 88 x 32 mm
:HLJKW 0DWHULDO
~300 g Aluminium base and plastic cover Environmental Conditions 7HPSHUDWXUHRSHUDWLQJ 7HPSHUDWXUHVWRUDJH
+XPLGLW\RSHUDWLQJ
+XPLGLW\VWRUDJH
+5 to +40 C
-5 to +45 C 5 to 85%, non-condensing 5 to 95%, non-condensing 28 Technical Specification Hardware Deliverables blip C11 device hardware Power adapter and serial cable CD containing the blip C11 Users Manual, the Windows-based maintenance tool BLIP Manager, and BLIP applications Getting started instructions printed on the CD cover Web address, log in instructions for the BLIP website Software Deliverables Bootloader, preinstalled in the blip C11 hardware Software Developers Kit (SDK) (can be obtained from the Ericsson Developers Zone):
Software platform based on m CLinux/m C-Libc and the Ericsson Bluetooth Host Stack
Toolset: Open Source GNU cross development toolset (binutils, gcc, and gdb/Insight configured for arm-elf) Applications, built on top of the software platform, using the Toolset in the SDK BLIP manager, a Windows-based maintenance tool used for updating data and applications stored in the blip C11 The software package is divided into the following:
Applications Software Developers Kit (SDK) Bootloader The SDK consists of the software platform and a toolset. 29 7 Warranty Limited Warranty Thank you for purchasing this Ericsson Product. To get maximum use of your new product, we recommend that you follow a few simple steps:
Read chapter 8 - Guidelines for Safe and Efficient Use. Read all the terms and conditions of your Ericsson Warranty. Save your original receipt. You will need it for warranty repair claims. Should your Ericsson Product need warranty service, please send an e-mail to blip support, see www.ericsson.com/developerszone, to get further information. Our Warranty Ericsson warrants this Product to be free from defects in material and workmanship at the time of its original purchase and for a subsequent period of one (1) year. Any Ericsson accessory is covered by a warranty period of one (1) year from the date of its original purchase by a consumer in accordance with the applicable terms and conditions stipulated herein. Ericsson will maintain services for the Product under a subsequent period of thirty-nine (39) months from last manufacturing date of this Product model. What we will do If, during the warranty period, this Product fails to operate under normal use and service, due to improper materials or workmanship, Ericsson will, at its option, either repair or replace the Product in accordance with the terms and conditions stipulated herein. Conditions 1. The warranty is valid only if the original receipt issued to the original purchaser by the dealer, specifying the date of purchase and serial number, is presented with the Product to be repaired or replaced. Ericsson reserves 30 Warranty 2. 3. 4. 5. 6. 7. the right to refuse warranty service if this information has been removed or changed after the original purchase of the Product from the dealer. If Ericsson repairs or replaces the Product, the repaired or replaced Product shall be warranted for the remaining time of the original warranty period or for ninety (90) days from the date of repair, whichever is longer. Repair or replacement may involve the use of functionally equivalent reconditioned units. Replaced faulty parts or components will become the property of Ericsson. This warranty does not cover any failure of the Product due to normal wear and tear, or due to misuse, including but not limited to use in other than the normal and customary manner, in accordance with Ericssons instructions for use and maintenance of the Product. Nor does this warranty cover any failure of the Product due to accident, modification or adjustment, acts of God, improper ventilation or damages resulting from liquid. Ericsson does not warrant that use of the Product will be uninterrupted or error free. This warranty does not cover product failures caused by improper repair installations or services not performed by an Ericsson appointed service location in accordance with the instructions given by the BLIP support. The warranty does not cover Product failures, which have been caused by use of non-Ericsson original accessories. Tampering with any of the seals on the Product will void the warranty. THERE ARE NO EXPRESS WARRANTIES, WHETHER WRITTEN OR ORAL, OTHER THAN THIS PRINTED LIMITED WARRANTY. ALL IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY. IN NO EVENT SHALL ERICSSON BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE WHATSOEVER, INCLUDING BUT NOT LIMITED TO LOST PROFITS OR COMMERCIAL LOSS, TO THE FULL EXTENT THOSE DAMAGES CAN BE DISCLAIMED BY LAW. Some countries/states do not allow the exclusion or limitation of incidental or consequential damage, or limitation of the duration of implied warranties, so the preceding limitations or exclusions may not apply to you. This warranty gives you specific rights, and you may also have other legal rights which may vary from country to country/state to state. Bluetooth Capability Statement This product is manufactured to meet the Bluetooth Specification 1.0b with critical Errata. The following Bluetooth profiles are supported:
LAN Access Profile Generic Access Profile Serial Port Profile 31 8 Guidelines for Safe and Efficient Use Please read this information before using your BLIP. Your BLIP is a highly sophisticated electronic device. To get the most out of your BLIP, please read this text about product care, and safe and efficient use. Product Care Do not expose your product to liquid, moisture, or extreme humidity. Do not expose your product to extreme high or low temperatures. Do not expose your product to lit candles, cigarettes, or cigars, or to open flames etc. Do not drop, throw or try to bend the product as rough treatment could damage it. Do not paint your product as the paint could obstruct parts and prevent normal use. Do not attempt to disassemble your product; a broken warranty seal will void the warranty. The product does not contain consumer serviceable components. Should your BLIP need service, please send an e-mail to BLIP support, see www.ericsson.com/developerszone, to get further information. Treat your product with care, keep it in a clean and dust-free place. Changes or modifications to this product, not expressly approved by Ericsson, may void the users authority to operate the equipment. Antenna Care Do not place a metallic shield around your BLIP since it will reduce the radio transmission efficiency. Efficient Use For optimum performance, please make sure that there is no metallic surrounding your BLIP. 32 Guidelines for Safe and Efficient Use Radio Frequency Exposure Your BLIP is a radio transmitter and receiver. When in operation, it communicates with a Bluetooth equipped mobile phone or PDA (Personal Digital Assistant) by receiving and transmitting radio frequency (RF) electromagnetic fields in the frequency range 2400 to 2500 MHz. The output power of the radio transmitter is very low, 0,001 Watt. The BLIP unit is designed to be in compliance with the RF exposure limits set by national authorities and international health agencies2 when installed or used separate from other antennas or radio transmitters. Driving RF energy may affect some electronic systems in motor vehicles such as car stereo, safety equipment etc. Check with your vehicle manufacturers representative to be sure that your BLIP will not affect the electronic systems in your vehicle. Vehicles Equipped with an Air Bag:
An air bag inflates with great force. Do not place objects, including either installed or portable wireless equipment, in the area over the air bag or in the air bag deployment area. If in-vehicle wireless equipment is improperly installed and the air bag inflates, serious injury could result. 2. Examples of RF exposure standards and guidelines:
ICNIRP, "Guidelines for limiting exposure to time-varying electric, magnetic, and electromagnetic fields
(up to 300 GHz)", International Commission on Non-Ionizing Radiation Protection (ICNIRP), Health Phys-
ics, vol. 74, pp 494-522, April 1998. 99/519/EC, EU Council Recommendation on the limitation of exposure to the general public to electro-
magnetic fields 0 Hz - 300 GHz, Official Journal of the European Communities, July 12, 1999. ANSI/IEEE C95.1-1992, "Safety levels with respect to human exposure to radio frequency electromag-
netic fields, 3 kHz to 300 GHz", The Institute of Electrical and Electronics Engineers Inc., New York, 1991. FCC Report and Order, ET Docket 93-62, FCC 96-326, Federal Communications Commission (FCC), August 1996. Radiocommunications (Electromagnetic Radiation Human Exposure) Standard 1999, Australian Com-
munications Authority (ACA), May 1999 33 Guidelines for Safe and Efficient Use Electronic Devices Most modern electronic equipment, for example equipment in hospitals and cars, is shielded from RF energy. However, certain electronic equipment is not, therefore:
Do not use your BLIP near medical equipment without requesting permission. BLIPs may affect the operation of some hearing aids, implanted cardiac pacemakers and other medically implanted equipment. Pacemaker patients should be aware that the use of a BLIP very close to a pacemaker might cause the device to malfunction. If you have any reason to suspect that interference is taking place, immediately turn off your BLIP. Contact your cardiologist for more information. Aircraft Turn off your BLIP before boarding any aircraft. To prevent interference with communication systems, you must not use your BLIP while the plane is in the air. Do not use it on the ground without permission from the crew. Blasting Areas Turn off your BLIP when in a blasting area or in areas posted "turn off two-way radio" to avoid interfering with blasting operations. Construction crews often use remote control RF devices to set off explosives. Explosive Atmospheres Turn off your BLIP when in any area with a potentially explosive atmosphere. It is rare, but your BLIP or its accessories could generate sparks. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. They include fuelling areas, such as petrol stations, below deck on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Do not transport or store flammable gas, liquid, or explosives in the same compartment of your vehicle that contains your BLIP and accessories. 34 Guidelines for Safe and Efficient Use Power Supply Connect the AC power adapter only to designated power sources as marked on the product. To reduce risk of damage to the electric cord, remove it from the outlet by holding onto the AC adapter rather than the cord. Make sure the cord is positioned so that it will not be stepped on, tripped over or otherwise subjected to damage or stress. To reduce risk of electric shock, unplug the unit from any power source before attempting to clean it.If the plug will not fit into the outlet, have a proper outlet installed by a qualified electrician. Improper connection can result in risk of electric shock. Children Do not allow children to play with your BLIP. They could hurt themselves or others, or could accidentally damage the BLIP. Your BLIP contain small parts that could become detached and create a choking hazard. Disposing of the Product The product should never be placed in municipal waste. Please check local regulations for disposal of electronic products. 35 9 Licence Agreement This is a legal Agreement, between you Licensee, the recipient of the enclosed Software on compact disc, diskette or any other media, e.g. your BLIP, and any upgrades thereof, and Ericsson Business Innovation AB, the Vendor. By opening the software package and selecting the "I agree" button and/or using the software you are agreeing to be bound by the terms of this Agreement. Licence The Licensee is hereby granted a non-transferable, non-exclusive, restricted right and licence to use the software included herein, Software. However, the Software licensed hereunder may be delivered in an inseparable package also containing other software programs than the Software. You may:
Use the enclosed Software on a single Ericsson product Make copies of the Software solely for purposes of backup. The copyright notice must be reproduced and included on a label on any backup copy. You may not:
Subject to when applicable, the EC Council Directive of May 14, 1991 on the legal protection of computer programs (91/250/EEG) ("Software Directive" Article 6) distribute copies of this Software or its documentation to others;
Modify, rent, lease or grant your rights to this Software to third parties
(except in the event the Ericsson product containing an item of Software is transferred to a third party and provided the transferee agrees in writing to be bound by the terms of this Licence Agreement). Translate, reverse engineer, decompile, disassemble or otherwise alter the Software or its documentation or disclose any information designated as confidential or proprietary at the time of disclosure or, by nature, is confidential or proprietary. Term Your licence remains effective from the date of receipt until terminated. You can terminate it at any other time by destroying the Software together with all copies of the Software in any form. Your licence will also automatically terminate without 36 Licence Agreement notice if you fail to comply with any term or condition of this Agreement. Upon any termination you must destroy all copies of the Software in any form. Limited Warranty Vendor warrants the CD-ROM, on which part of the Software is provided, to be free of defects in materials and workmanship under normal use for ninety (90) days after the date of receipt. The Vendors and its suppliers entire liability and your exclusive remedy under this warranty (which is subject to you returning the Software according to instructions on http://www.ericsson.com/developerszone with a copy of your receipt) will be, at Vendors option, to replace the disc(s)/
diskette(s) or refund the purchase price for the Software and terminate this Agreement. Except for the above express limited warranties, Vendor and its suppliers make and you receive no warranties or conditions either express, implied, statutory or otherwise and Vendor and its suppliers specifically disclaim any implied warranties of merchantability and fitness for a particular purpose. Vendor does not warrant that the Software will be uninterrupted or error free. You assume the responsibility for the selection of the program and hardware to achieve your intended results;
and for the installation, use and results obtained from the Software. Some jurisdictions do not allow limitations on duration of an implied warranty, so the above limitation may not apply to you. Intended Use The Software shall be used in accordance with the instructions and for its intended use and purpose only. The software or part of it is not permitted to be used in for example life support systems, nuclear facility applications, missile technology, chemical or biologized industry or of flight navigation or communication of air, ground support equipment or other similar business, if failure to perform on behalf of the software in any way, could result in personal injury, death, damage to tangibles or environmental damage. Limitation of Liability In no event shall Vendor or its suppliers be liable for any indirect or consequential losses or damages whatsoever including loss of data, loss of business, loss of profits, business interruption or personal injury arising out of the use of or inability to use this Software. Vendor and its suppliers entire liability under this Agreement shall be limited to the amount actually paid by Licensee for the Software. 37 Licence Agreement Governing law The validity, construction and performance of this Agreement shall be governed by the laws of Sweden. 38 10 Declaration of Conformity We, Ericsson Business Innovation LM Ericssons vg 8 SE-126 25 Stockholm declare under sole responsibility that our product blip C11 to which this declaration relates, conforms to the appropriate standards ETS 300 328, ETS 300 826, EN 60950, EN 60215, following the provisions of Radio Equipment and Telecommunication Equipment directive 1995/5/EEC, EMC directive 89/336/EEC, and Low voltage directive 73/23/EEC. Stockholm, March 2001
(Place and date of issue) Jran Hoff, President FCC Statement This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. 39
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2001-07-20 | JBP - Part 15 Class B Computing Device Peripheral | Original Equipment | |
2 | 2001-04-30 | 2402 ~ 2480 | DSS - Part 15 Spread Spectrum Transmitter |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 | Effective |
2001-07-20
|
||||
1 2 |
2001-04-30
|
|||||
1 2 | Applicant's complete, legal business name |
Ericsson Business Innovation AB
|
||||
1 2 | FCC Registration Number (FRN) |
0004320800
|
||||
1 2 | Physical Address |
LM Ericssons vag 8
|
||||
1 2 |
Stockholm, N/A SE-126 25
|
|||||
1 2 |
Sweden
|
|||||
app s | TCB Information | |||||
1 2 | TCB Application Email Address |
r******@itsqs.com
|
||||
1 2 | TCB Scope |
A1: Low Power Transmitters below 1 GHz (except Spread Spectrum), Unintentional Radiators, EAS (Part 11) & Consumer ISM devices
|
||||
1 2 |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|||||
app s | FCC ID | |||||
1 2 | Grantee Code |
PJP
|
||||
1 2 | Equipment Product Code |
BLIP-C11
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 | Name |
J******** H********
|
||||
1 2 | Title |
President
|
||||
1 2 | Telephone Number |
+46 8********
|
||||
1 2 | Fax Number |
+46 8********
|
||||
1 2 |
j******@inn.ericsson.se
|
|||||
app s | Technical Contact | |||||
1 2 | Firm Name |
Ericsson Microwave Systems AB
|
||||
1 2 | Name |
H**** W****
|
||||
1 2 | Physical Address |
TS/U
|
||||
1 2 |
Molndal, SE-431 84
|
|||||
1 2 |
Sweden
|
|||||
1 2 | Telephone Number |
46-31********
|
||||
1 2 |
46-31******** Extension:
|
|||||
1 2 | Fax Number |
46-31********
|
||||
1 2 |
h******@emw.ericsson.se
|
|||||
app s | Non Technical Contact | |||||
1 2 | Firm Name |
Ericsson Microwave Systems AB
|
||||
1 2 | Name |
P****** L****
|
||||
1 2 | Physical Address |
TS/UC
|
||||
1 2 |
Molndal, SE-431 84
|
|||||
1 2 |
Sweden
|
|||||
1 2 | Telephone Number |
46-31********
|
||||
1 2 | Fax Number |
46-31********
|
||||
1 2 |
p******@emw.ericsson.se
|
|||||
app s | Confidentiality (long or short term) | |||||
1 2 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
1 2 | Yes | |||||
1 2 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 | Equipment Class | JBP - Part 15 Class B Computing Device Peripheral | ||||
1 2 | DSS - Part 15 Spread Spectrum Transmitter | |||||
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | Bluetooth Local Infotainment Point | ||||
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 | Modular Equipment Type | Does not apply | ||||
1 2 | Purpose / Application is for | Original Equipment | ||||
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 | Grant Comments | This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. End-users must be provided with specific operating instructions for satisfying RF exposure compliance. | ||||
1 2 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 | Firm Name |
Intertek SEMKO AB
|
||||
1 2 | Name |
N****** B******
|
||||
1 2 | Telephone Number |
46-8-********
|
||||
1 2 | Fax Number |
46-8-********
|
||||
1 2 |
n******@intertek.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15B | |||||||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15C | 2402.00000000 | 2480.00000000 | 0.0010000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC