all | frequencies |
|
|
exhibits | applications |
---|---|---|---|---|---|
manuals |
app s | submitted / available | |||||||
---|---|---|---|---|---|---|---|---|
1 2 3 4 5 |
|
Users Manual | Users Manual | 304.55 KiB | ||||
1 2 3 4 5 |
|
product manual | Users Manual | 212.38 KiB | / January 11 2011 | |||
1 2 3 4 5 | Cover Letter(s) | |||||||
1 2 3 4 5 | Test Report | |||||||
1 2 3 4 5 | Test Setup Photos | |||||||
1 2 3 4 5 | RF Exposure Info | |||||||
1 2 3 4 5 | RF Exposure Info | / January 11 2011 | ||||||
1 2 3 4 5 | Cover Letter(s) | / January 11 2011 | ||||||
1 2 3 4 5 | Cover Letter(s) | / January 11 2011 | ||||||
1 2 3 4 5 | External Photos | / January 11 2011 | ||||||
1 2 3 4 5 | Internal Photos | / January 11 2011 | ||||||
1 2 3 4 5 | ID Label/Location Info | / January 11 2011 | ||||||
1 2 3 4 5 | Cover Letter(s) | / January 11 2011 |
1 2 3 4 5 | Users Manual | Users Manual | 304.55 KiB |
B5CH118AA B5CH118AA Product Manual DRU-E 5 GHz WLAN Radio Module Document Date:
Document Number:
Document Version Number:
Document Status:
July 7, 2014 B5CH118AA 1 Released Copyright 2013 by Ericsson AB. All rights reserved. B5CH118AA Product Manual DRU-E 5 GHz WLAN Radio Module Page 1 of 17 Contents About this Document ...................................................................2 Introduction ..................................................................................3 Conditions of Use .........................................................................4 Module Installation and Service.................................................5 Final Product Requirements ........................................................6 Regulatory Statements ..............................................................14 About this Document This document is a product manual for the DRU-E 5 GHz WLAN Radio Module, including its limitations on use in any product marketed or offered for sale. It is intended as a supplement to training and documentation by Ericsson Inc. or its authorized agents. B5CH118AA Product Manual DRU-E 5 GHz WLAN Radio Module Page 2 of 17 Introduction The B5CH118AA (hereafter referred to as the module) is a 5 GHz radio module compatible with the IEEE 802.11 standard for Wireless LAN operation. It is designed to be interoperable with WLAN products which are based on Orthogonal Frequency Division Multiplexing (OFDM) radio technology. The module contains a complete IEEE 802.11a/n radio and Medium Access Control
(MAC) protocol engine which allows implementation of an IEEE 802.11a/n access point (AP). The module is not intended for stand-alone operation. It will only be marketed as a complete product, in conjunction with a package, DC power supply and antennas
(hereafter referred to as the product or the final product). The module can be used in the 5 GHz U-NII / ISM bands. Since the module has an Ericsson proprietary digital interface, it cannot be directly connected to any standard telecommunications or computer devices. It can only be used with final products designed and authorized specifically for that purpose. B5CH118AA Product Manual DRU-E 5 GHz WLAN Radio Module Page 3 of 17 Conditions of Use General Conditions of Use This manual is intended to supplement training provided by Ericsson or authorized parties. The module B5CH118AA is only intended for use in Ericsson products and is not for sale to the general public as a stand-alone module. Please read this entire document, including the Regulatory Statements section before attempting to install or operate the module. Warning: Any use of B5CH118AA in any manner which is not expressly specified within this manual or specifically approved by Ericsson or its authorized agents will void the users right to operate this module, and is expressly forbidden by Ericsson. This includes any modification of the module, installation of the module in a configuration or used with antennas which are not expressly listed in this document or approved by Ericsson. B5CH118AA Product Manual DRU-E 5 GHz WLAN Radio Module Page 4 of 17 Country of Use B5CH118AA is certified with limited modular approval for use as an Intentional Radiator in the United States as device: FCC ID: RAR50005001 and in Canada as IC: 4674A-50005001. Please read all regulatory statements at the end of this document before any attempt to install or operate this module. The module is only certified for operation in the United States and Canada. Before attempting to install and operate this module in any other country, contact Ericsson for approval. Module Labeling One or more labels are applied to the module during manufacture, including a label which identifies the FCC and Industry Canada identification numbers. Do not attempt to remove any labels from the module. Module Installation and Service Installation into a Product The module shall only be installed by a technician trained by Ericsson or its authorized agents. It should only be installed into an approved product (see above) following all manufacturing and service procedures for that product. The module should only be installed into a final product in a manufacturing or service depot site. Caution: B5CH118AA is an electro-static discharge (ESD) sensitive device. All appropriate ESD measures must be taken when handling the module. Failure to employ appropriate ESD protection may damage the module. Module Service The module is not intended as a field-serviceable unit. It contains no field-
replaceable or field-serviceable parts, or any external adjustable mechanisms. The module should only be serviced in a manufacturing or service depot site approved by Ericsson or its authorized agents. B5CH118AA Product Manual DRU-E 5 GHz WLAN Radio Module Page 5 of 17 Final Product Requirements The requirements below apply to any final product in which the B5CH118AA module is installed. Antenna Usage and Module Transmit Power The DRU-E 5GHz radio module supports MIMO 3x3 configuration with three transmit chains and three receive chains. The B5CH118AA module shall only be used at the following output power levels in conjunction with the following antenna types as outlined in the tables that follow. 5725-5850 MHz Part 15 Subpart E For operation in the 5725-5850 MHz NII band, the B5CH118AA may be set to operate on 20 MHz. Table 8.3-2: Power and EIRP results for 3x3 MIMO 802.11n (SM-MIMO and STBC operation) Frequency
(MHz) 5740 5800 5825 Conducted Conducted Conducted Avg. Power ANT 1
(mW) 154.195 214.642 213.854 Avg. Power ANT 2
(mW) 139.172 205.475 182.772 Avg. Power ANT 3
(mW) 143.151 159.745 181.802 Output Power
(dBm) 26.40 27.63 27.62 Combined Conducted Output Power Limit Conducted Output Power Antenna
(dBm) 30.00 30.00 30.00 Margin
(dB) 3.60 2.37 2.38 Gain
(dBi) 6.50 6.50 6.50 EIRP Margin
(dB) 3.60 2.37 2.38 EIRP Limit
(dBm) 36.0 36.0 36.0 EIRP
(dBm) 32.40 33.63 33.62 Cable loss
(dB) 0.5 0.5 0.5 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) B5CH118AA Product Manual DRU-E 5 GHz WLAN Radio Module Page 6 of 17 5725-5850 MHz Part 15.247 Subpart C For operation in the 5725-5850 MHz ISM band, the B5CH118AA may be set to operate on 20 MHz and 40 MHz channel bandwidths. POINT-TO-MULTIPOINT (MAXIMUM OUTPUT POWER SHOWN AS PTX):
Table 8.3-1: Power and EIRP results for not correlated 33 MIMO, 802.11n Conducted Avg. Power Conducted Avg. Power Conducted Avg. Power Combined Conducted Conducted Channel bandwidth
(MHz) 20 40 Frequency
(MHz) 5740 5800 5825 5750 5790 ANT 1
(mW) 258.978 308.397 252.477 179.904 186.413 ANT 2
(mW) 219.048 266.877 245.572 145.592 171.952 ANT 3
(mW) 218.375 251.935 238.694 152.486 152.800 Output Power
(dBm) 28.43 29.18 28.67 26.79 27.09 Output Power Limit
(dBm) 30.00 30.00 30.00 30.00 30.00 Output Power Margin
(dB) 1.57 0.82 1.33 3.21 2.91 Antenna EIRP Margin
(dB) 1.57 0.82 1.33 3.21 2.91 EIRP Limit
(dBm) 36.0 36.0 36.0 36.0 36.0 EIRP
(dBm) 34.43 35.18 34.67 32.79 33.09 Cable loss
(dB) 0.5 0.5 0.5 0.5 0.5 Gain
(dBi) 6.50 6.50 6.50 6.50 6.50 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Combined 3 antennae gain (dBi) = 6.5 [dBi] + 10Log10(3) = 11.27 dBi Limit (dBm) = 30 ((11.27 0.5) (6.5 0.5)) = 30 (10.77 6.0) = 25.23 dBm Frequency
(MHz) Conducted Avg. Power ANT 1
(mW) 5740 5800 5825 170.876 190.523 154.635 Table 8.3-2: Power and EIRP results for not correlated 33 MIMO, 802.11a Conducted Avg. Power Conducted Avg. Power Conducted Combined Conducted Output Power Antenna ANT 2
(mW) 150.168 167.860 145.592 ANT 3
(mW) 152.800 158.667 152.486 Output Power
(dBm) 26.76 27.14 26.56 Output Power Limit
(dBm) 30.00 30.00 30.00 Margin
(dB) 3.24 2.86 3.44 Gain
(dBi) 6.50 6.50 6.50 EIRP Margin
(dB) 3.24 2.86 3.44 EIRP Limit
(dBm) 36.0 36.0 36.0 EIRP
(dBm) 32.76 33.14 32.56 Cable loss
(dB) 0.5 0.5 0.5 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Table 8.3-3: Power and EIRP results for correlated 33 MIMO (CDD/TXBF), 802.11n Conducted Avg. Power Conducted Avg. Power Conducted Avg. Power Conducted Conducted Combined Frequency
(MHz) 5740 5800 5825 5750 5790 ANT 1
(mW) 114.412 108.002 115.169 118.614 105.095 ANT 2
(mW) 98.730 108.976 108.231 98.017 101.559 ANT 3
(mW) 109.247 101.075 106.576 100.255 77.897 Output Power
(dBm) 25.08 25.02 25.18 25.01 24.54 Output Power Limit
(dBm) 25.23 25.23 25.23 25.23 25.23 Output Power Margin
(dB) 0.15 0.21 0.05 0.22 0.69 Antenna Gain
(dBi) 11.27 11.27 11.27 11.27 11.27 Cable loss
(dB) 0.5 0.5 0.5 0.5 0.5 EIRP Margin
(dB) 0.15 0.21 0.05 0.22 0.69 EIRP Limit
(dBm) 36.0 36.0 36.0 36.0 36.0 EIRP
(dBm) 35.85 35.79 35.95 35.78 35.31 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Combined 3 antennae gain (dBi) = 6.5 [dBi] + 10Log10(3) = 11.27 dBi Limit (dBm) = 30 ((11.27 0.5) (6.5 0.5)) = 30 (10.77 6.0) = 25.23 dBm Channel bandwidth
(MHz) 20 40 B5CH118AA Product Manual DRU-E 5 GHz WLAN Radio Module Page 7 of 17 Table 8.3-4: Power and EIRP results for correlated 33 MIMO (CDD/TXBF), 802.11a Frequency
(MHz) 5740 5800 5825 Conducted Conducted Conducted Avg. Power ANT 1
(mW) 108.816 123.704 112.131 Avg. Power ANT 2
(mW) 97.136 112.594 103.394 Avg. Power ANT 3
(mW) 105.151 90.544 107.960 Output Power
(dBm) 24.93 25.14 25.10 Combined Conducted Output Power Limit Conducted Output Power
(dBm) 25.23 25.23 25.23 Margin
(dB) 0.30 0.09 0.13 Antenna Gain
(dBi) 11.27 11.27 11.27 Cable loss
(dB) 0.5 0.5 0.5 EIRP
(dBm) 35.70 35.91 35.87 EIRP Limit
(dBm) 36.0 36.0 36.0 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Combined 3 antennae gain (dBi) = 6.5 [dBi] + 10Log10(3) = 11.27 dBi Limit (dBm) = 30 ((11.27 0.5) (6.5 0.5)) = 30 (10.77 6.0) = 25.23 dBm Table 8.3-5: Power and EIRP results for correlated 23, 22 MIMO (CDD/TXBF), 802.11n EIRP Margin
(dB) 0.30 0.09 0.13 Conducted Avg. Power Conducted Avg. Power Conducted Avg. Power Combined Conducted Conducted Channel bandwidth
(MHz) 20 40 Frequency
(MHz) 5740 5800 5825 5750 5790 ANT 1
(mW) 258.978 248.781 252.477 179.904 186.413 ANT 2
(mW) 219.048 223.106 245.572 145.592 171.952 ANT 3
(mW) N/A N/A N/A N/A N/A Output Power
(dBm) 26.79 26.74 26.97 25.13 25.54 Output Power Limit
(dBm) 27.00 27.00 27.00 27.00 27.00 Output Power Margin
(dB) 0.21 0.26 0.03 1.87 1.46 Antenna EIRP Margin
(dB) 0.21 0.26 0.03 1.87 1.46 EIRP Limit
(dBm) 36.0 36.0 36.0 36.0 36.0 EIRP
(dBm) 35.79 35.74 35.97 34.13 34.54 Cable loss
(dB) 0.5 0.5 0.5 0.5 0.5 Gain
(dBi) 9.50 9.50 9.50 9.50 9.50 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Combined 2 antennae gain (dBi) = 6.5 [dBi] + 10Log10(2) = 9.5 dBi Limit (dBm) = 30 ((9.5 0.5) (6.5 0.5)) = 30 (9.0 6.0) = 27.00 dBm Table 8.3-6: Power and EIRP results for correlated 23, 22 MIMO (CDD/TXBF), 802.11a Conducted Output Power Conducted Avg. Power Conducted Avg. Power Conducted Combined Antenna Output ANT 2
(mW) 150.168 167.860 145.592 ANT 3
(mW) N/A N/A N/A Output Power
(dBm) 25.07 25.54 24.77 Power Limit
(dBm) 27.00 27.00 27.00 Margin
(dB) 1.93 1.46 2.23 Gain
(dBi) 9.50 9.50 9.50 Cable loss
(dB) 0.5 0.5 0.5 Conducted Avg. Power ANT 1
(mW) 170.876 190.523 154.635 EIRP Margin
(dB) 1.93 1.46 2.23 EIRP Limit
(dBm) 36.0 36.0 36.0 EIRP
(dBm) 34.07 34.54 33.77 Frequency
(MHz) 5740 5800 5825 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Combined 2 antennae gain (dBi) = 6.5 [dBi] + 10Log10(2) = 9.5 dBi Limit (dBm) = 30 ((9.5 0.5) (6.5 0.5)) = 30 (9.0 6.0) = 27.00 dBm Table 8.3-7: Power and EIRP results for correlated 13, 12, 11 MIMO (CDD/TXBF), 802.11n Frequency Conducted Avg. Power ANT Conducted Avg. Power ANT Conducted Avg. Power ANT Combined Conducted Conducted Antenna 3 2 1
(mW)
(MHz) EIRP
(dBm) 30.13 30.89 30.02 28.55 28.70 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) 258.978 308.397 252.477 179.904 186.413 Gain
(dBi) 6.50 6.50 6.50 6.50 6.50
(mW) N/A N/A N/A N/A N/A
(mW) N/A N/A N/A N/A N/A 5740 5800 5825 5750 5790 Output Power Limit
(dBm) 30.00 30.00 30.00 30.00 30.00 Output Power Margin
(dB) 5.87 5.11 5.98 7.45 7.30 Output Power
(dBm) 24.13 24.89 24.02 22.55 22.70 Cable loss
(dB) 0.5 0.5 0.5 0.5 0.5 EIRP Limit
(dBm) 36.0 36.0 36.0 36.0 36.0 EIRP Margin
(dB) 5.87 5.11 5.98 7.45 7.30 Channel bandwidth
(MHz) 20 40 B5CH118AA Product Manual DRU-E 5 GHz WLAN Radio Module Page 8 of 17 EIRP Margin
(dB) 36.0 36.0 36.0 Table 8.3-8: Power and EIRP results for correlated 13, 12, 11 MIMO (CDD/TXBF), 802.11a Frequency
(MHz) Conducted Avg. Power ANT 1
(mW) Conducted Avg. Power ANT 2
(mW) Conducted Avg. Power ANT 3
(mW) Conducted Output Power Limit Conducted Output Power Antenna Combined Output Power
(dBm) 152.800 158.667 152.486
(dBm) 22.33 22.80 21.89 Margin
(dB) 30.00 30.00 30.00 Gain
(dBi) 7.67 7.20 8.11 Cable loss
(dB) 6.50 6.50 6.50 EIRP Limit
(dBm) 28.33 28.80 27.89 EIRP
(dBm) 0.5 0.5 0.5 5740 5800 5825 152.800 158.667 152.486 N/A N/A N/A N/A N/A N/A Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Table 8.3-9: Power and EIRP results for correlated 33 MIMO (STBC/STC), 802.11n Conducted Avg. Power Conducted Avg. Power Conducted Avg. Power Conducted Conducted Combined 2 1 ANT ANT ANT
(mW)
(MHz) Frequency EIRP Margin
(dB) 1.57 0.82 1.33 3.21 2.91 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 Output Power
(dBm) 28.43 29.18 28.67 26.79 27.09 EIRP Limit
(dBm) 36.0 36.0 36.0 36.0 36.0 Cable loss
(dB) 0.5 0.5 0.5 0.5 0.5 218.375 251.935 238.694 152.486 152.800 219.048 266.877 245.572 145.592 171.952 258.978 308.397 252.477 179.904 186.413 EIRP
(dBm) 34.43 35.18 34.67 32.79 33.09 Gain
(dBi) 6.50 6.50 6.50 6.50 6.50 5740 5800 5825 5750 5790 Antenna
(mW)
(mW) 3 Output Power Limit
(dBm) 30.00 30.00 30.00 30.00 30.00 Output Power Margin
(dB) 1.57 0.82 1.33 3.21 2.91 Channel bandwidth
(MHz) 20 40
(mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Table 8.3-10: Power and EIRP results for correlated 33 MIMO (STBC/STC), 802.11a Frequency
(MHz) 5740 5800 5825 Conducted Conducted Conducted Avg. Power ANT 1
(mW) 170.876 190.523 154.635 Avg. Power ANT 2
(mW) 150.168 167.860 145.592 Avg. Power ANT 3
(mW) 152.800 158.667 152.486 Output Power
(dBm) 26.76 27.14 26.56 Combined Conducted Output Power Limit Conducted Output Power Antenna
(dBm) 30.00 30.00 30.00 Margin
(dB) 3.24 2.86 3.44 Gain
(dBi) 6.50 6.50 6.50 Cable loss
(dB) 0.5 0.5 0.5 EIRP Margin
(dB) 3.24 2.86 3.44 EIRP Limit
(dBm) 36.0 36.0 36.0 EIRP
(dBm) 32.76 33.14 32.56 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Table 8.3-11: Power and EIRP results for correlated 23, 22 MIMO (STBC/STC), 802.11n Conducted Avg. Power Conducted Avg. Power Conducted Avg. Power Combined Conducted Conducted Frequency
(MHz) 5740 5800 5825 5750 5790 ANT 1
(mW) 258.978 308.397 252.477 179.904 186.413 ANT 2
(mW) 219.048 266.877 245.572 145.592 171.952 ANT 3
(mW) N/A N/A N/A N/A N/A Output Power
(dBm) 26.79 27.60 26.97 25.13 25.54 Output Power Limit
(dBm) 30.00 30.00 30.00 30.00 30.00 Output Power Margin
(dB) 3.21 2.40 3.03 4.87 4.46 Antenna EIRP Margin
(dB) 3.21 2.40 3.03 4.87 4.46 EIRP Limit
(dBm) 36.0 36.0 36.0 36.0 36.0 EIRP
(dBm) 32.79 33.60 32.97 31.13 31.54 Cable loss
(dB) 0.5 0.5 0.5 0.5 0.5 Gain
(dBi) 6.50 6.50 6.50 6.50 6.50 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Channel bandwidth
(MHz) 20 40 B5CH118AA Product Manual DRU-E 5 GHz WLAN Radio Module Page 9 of 17 Table 8.3-12: Power and EIRP results for correlated 23, 22 MIMO (STBC/STC), 802.11a Conducted Output Power Conducted Avg. Power Conducted Avg. Power Conducted Combined Antenna Output Conducted Avg. Power ANT 1
(mW) 170.876 190.523 154.635 ANT 2
(mW) 150.168 167.860 145.592 ANT 3
(mW) N/A N/A N/A Output Power
(dBm) 25.07 25.54 24.77 Power Limit
(dBm) 30.00 30.00 30.00 Margin
(dB) 4.93 4.46 5.23 Gain
(dBi) 6.50 6.50 6.50 Cable loss
(dB) 0.5 0.5 0.5 EIRP Limit
(dBm) 36.0 36.0 36.0 EIRP
(dBm) 31.07 31.54 30.77 Frequency
(MHz) 5740 5800 5825 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) POINT-TO-POINT (MAXIMUM OUTPUT POWER SHOWN AS PTX):
EIRP Margin
(dB) 4.93 4.46 5.23 Table 8.3-13: Power and EIRP results for correlated 33 MIMO (TXBF), 802.11n Conducted Avg. Power Conducted Avg. Power Conducted Avg. Power Conducted Conducted Combined Channel bandwidth
(MHz) 20 40 Frequency
(MHz) 5740 5800 5825 5750 5790 ANT 1
(mW) 258.978 308.397 252.477 179.904 186.413 ANT 2
(mW) 219.048 266.877 245.572 145.592 171.952 ANT 3
(mW) 218.375 251.935 238.694 152.486 152.800 Output Power
(dBm) 28.43 29.18 28.67 26.79 27.09 Output Power Limit
(dBm) 30.00 30.00 30.00 30.00 30.00 Output Power Margin
(dB) 1.57 0.82 1.33 3.21 2.91 Antenna Gain
(dBi) 11.27 11.27 11.27 11.27 11.27 Cable loss
(dB) 0.5 0.5 0.5 0.5 0.5 EIRP Margin
(dB) N/A N/A N/A N/A N/A EIRP Limit
(dBm) N/A N/A N/A N/A N/A EIRP
(dBm) 39.20 39.95 39.44 37.56 37.86 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Table 8.3-14: Power and EIRP results for correlated 33 MIMO (TXBF), 802.11a Conducted Conducted Conducted Avg. Power ANT 1
(mW) 170.876 190.523 154.635 Avg. Power ANT 2
(mW) 150.168 167.860 145.592 Avg. Power ANT 3
(mW) 152.800 158.667 152.486 Combined Output Power
(dBm) 26.76 27.14 26.56 Conducted Output Power Limit
(dBm) 30.00 30.00 30.00 Conducted Output Power Margin
(dB) 3.24 2.86 3.44 Antenna Gain
(dBi) 11.27 11.27 11.27 Cable loss
(dB) 0.5 0.5 0.5 EIRP Margin
(dB) N/A N/A N/A EIRP Limit
(dBm) N/A N/A N/A EIRP
(dBm) 37.53 37.91 37.33 Frequency
(MHz) 5740 5800 5825 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) B5CH118AA Product Manual DRU-E 5 GHz WLAN Radio Module Page 10 of 17 5150-5250 MHz Part 15 Subpart E For operation in the 5150-5250 MHz U-NII band, the B5CH118AA may be set to operate on 20 MHz and 40 MHz channel bandwidths. Table 8.4-1: EIRP calculation for correlated MIMO 3x3 with 6.5 dBi antennas Modulation Frequency
(MHz) 802.11a 802.11n HT20 802.11n HT40 5180 5200 5220 5180 5200 5220 5190 5210 Conducted Avg. Power ANT 1
(dBm) 16.50 16.30 16.78 16.15 16.32 16.62 11.68 14.01 Conducted Avg. Power ANT 2
(dBm) 16.77 16.62 16.14 16.17 16.12 15.64 12.64 14.31 Conducted Avg. Power ANT 3
(dBm) 16.30 16.30 16.61 16.17 15.79 16.12 13.08 14.37 Combined Output Power
(dBm) 21.30 21.18 21.29 20.93 20.85 20.92 17.28 19.00 Conducted Output Power Limit
(dBm) 25.23 25.23 25.23 25.23 25.23 25.23 25.23 25.23 Conducted Output Power Margin
(dB) 3.93 4.05 3.94 4.29 4.38 4.31 7.95 6.22 Total antenna Gain
(dBi) 11.27 11.27 11.27 11.27 11.27 11.27 11.27 11.27 Note: In order to comply with elevation mask of 6.5 dBi antenna the maximum EIRP shall below 32.8 dBm. Table 8.4-2: EIRP calculation for correlated MIMO 3x3 with 4 dBi antennas Modulation Frequency
(MHz) 802.11a 802.11n HT20 802.11n HT40 5180 5200 5220 5180 5200 5220 5190 5210 Conducted Avg. Power ANT 1
(dBm) 7.12 7.34 7.71 7.11 7.29 7.66 7.32 7.38 Conducted Avg. Power ANT 2
(dBm) 7.54 7.04 6.81 6.68 7.00 6.83 7.42 7.66 Conducted Avg. Power ANT 3
(dBm) 7.70 6.73 7.09 7.12 6.73 7.05 7.37 7.13 Combined Output Power
(dBm) 12.23 11.82 11.99 11.75 11.78 11.97 12.14 12.17 Conducted Output Power Limit
(dBm) 27.73 27.73 27.73 27.73 27.73 27.73 27.73 27.73 Conducted Output Power Margin
(dB) 15.50 15.91 15.74 15.98 15.94 15.76 15.59 15.56 Total antenna Gain
(dBi) 8.77 8.77 8.77 8.77 8.77 8.77 8.77 8.77 Note: 4 dBi antenna gain configuration has 21 dBm EIRP results, therefore elevation mask is not applicable. Table 8.4-3: EIRP calculation for uncorrelated MIMO 3x3 with 6.5 dBi antennas Modulation Frequency
(MHz) 802.11a 802.11n HT20 802.11n HT40 5180 5200 5220 5180 5200 5220 5190 5210 Conducted Avg. Power ANT 1
(dBm) 18.23 21.81 21.67 18.19 21.77 21.12 13.96 16.83 Conducted Avg. Power ANT 2
(dBm) 18.58 21.27 21.27 17.94 20.54 21.24 15.16 17.88 Conducted Avg. Power ANT 3
(dBm) 18.69 21.27 21.58 18.16 20.61 21.55 15.61 17.43 Combined Output Power
(dBm) 23.28 26.23 26.28 22.87 25.78 26.08 19.74 22.17 Conducted Output Power Limit
(dBm) 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 Conducted Output Power Margin
(dB) 6.72 3.77 3.72 7.13 4.22 3.92 10.26 7.83 Note: In order to comply with elevation mask of 6.5 dBi antenna the maximum EIRP shall below 32.8 dBm. Table 8.4-4: EIRP calculation for uncorrelated MIMO 3x3 with 4 dBi antennas Modulation Frequency
(MHz) 802.11a 802.11n HT20 802.11n HT40 5180 5200 5220 5180 5200 5220 5190 5210 Conducted Avg. Power ANT 1
(dBm) 11.73 12.81 12.67 11.69 13.27 12.62 11.82 11.88 Conducted Avg. Power ANT 2
(dBm) 12.08 11.77 11.27 11.44 11.54 11.74 11.92 11.66 Conducted Avg. Power ANT 3
(dBm) 12.19 11.77 11.58 11.66 11.11 11.55 11.87 11.63 Combined Output Power
(dBm) 16.78 16.92 16.65 16.37 16.85 16.77 16.64 16.50 Conducted Output Power Limit
(dBm) 30.00 30.00 30.00 30.00 30.00 30.00 30.00 30.00 Conducted Output Power Margin
(dB) 13.22 13.08 13.35 13.63 13.15 13.23 13.36 13.50 Antenna Gain
(dBi) 6.5 6.5 6.5 6.5 6.5 6.5 6.5 6.5 Antenna Gain
(dBi) 4.00 4.00 4.00 4.00 4.00 4.00 4.00 4.00 EIRP
(dBm) 32.57 32.45 32.56 32.21 32.12 32.19 28.55 30.28 EIRP
(dBm) 21.00 20.59 20.76 20.52 20.56 20.74 20.91 20.94 EIRP
(dBm) 29.78 32.73 32.78 29.37 32.28 32.58 26.24 28.67 EIRP
(dBm) 20.78 20.92 20.65 20.37 20.85 20.77 20.64 20.50 Note: 4 dBi antenna gain configuration has 21 dBm EIRP results, therefore elevation mask is not applicable. B5CH118AA Product Manual DRU-E 5 GHz WLAN Radio Module Page 11 of 17 Certified Antennas:
The following antennas are certified for use:
Manufacturer Part #
Gain (dBi) Ericsson Ericsson Note: 4.0 dBi antenna is for 51505250 MHz only. B1BG123AAA B1BG154AAA 6.5 4.0 Type OMNI OMNI In order to comply with the FCC and Industry Canada rules in the USA and Canada, respectively, it is required to respect the maximum transmit power limits as follows for each of the antenna types as indicated in the above tables. Warning: Use of this module in conjunction with any antenna not expressly listed above will void authority to install or operate this equipment. Warning: Setting of module transmit power above the limits specified in the above table for a particular combination of antenna type, frequency of operation, and type of usage, will exceed FCC or Industry Canada limits and void authority to install or operate this equipment. Product Installation Products which contain B5CH118AA shall only be installed by professional installers trained by Ericsson or its authorized agents. This product is to be installed on fixed permanent structures. In addition to normal installation procedures and good installation practice, professional installers are responsible to ensure that:
1. Only an approved antenna (see above) is connected to the module, and, 2. The antenna is mounted in such a manner and in such a location that access to the antenna by the general population is minimized. Access to the antenna by the general population should be limited to more than the minimum safety distance. This distances are outlined according to product type and whether high gain antennas are used:
DRU-E 2.4 GHz radio DRU-E 5 GHz radio Max E.I.R.P 37.85 dB 39.95 dB Minimum Safety Distance 14.2 inches B5CH118AA Product Manual DRU-E 5 GHz WLAN Radio Module Page 12 of 17 Adherence to these rules by the professional installer is mandatory. See full installation procedures for the particular product for details. Product Labeling The following permanent label, or one containing equivalent information, must be affixed in a conspicuous location on the exterior of every product containing this module:
This device contains the following:
FCC ID: RAR50005001 B5CH118AA Product Manual DRU-E 5 GHz WLAN Radio Module Page 13 of 17 Regulatory Statements The following regulatory notes apply to the product which contains module B5CH118AA. The following sections or equivalent information shall appear in the user-manual of the final product. Regulatory Information and Disclaimers Installation and use of this device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. The manufacturer is not responsible for any interference to radio or television equipment caused by unauthorized modification of this device, or attachment of any antennas or equipment other than those specified by the manufacturer. The manufacturer or its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. Manufacturers FCC Conformity Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. B5CH118AA Product Manual DRU-E 5 GHz WLAN Radio Module Page 14 of 17 Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Manufacturers Industry Canada Conformity Statement This device has been designed to operate with an antenna having a maximum gain of 6.5 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. This device has been designed to ensure that radio frequency emissions are maintained within the band of operation under all normal operating conditions listed in this manual. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropic radiated power (EIRP) is not more than that required for successful communication. This Class B Digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil a t conu pour fonctionner avec une antenne avec un gain maximum de 4.5dBi. Lutilisation d antennes de gain suprieur est strictement dfendue selon la rglementation dIndustrie Canada. Cet appareil a t conu a garantir que les missions de frquences radio soit maintenues dans la bande dopration sous toutes les conditions nonc dans ce manuel. Son utilisation est soumise aux deux conditions suivantes: (1) Cet appareil ne doit pas tre la cause dinterfrence, et (2) cet appareil doit pouvoir tre capable de recevoir toutes sortes dinterfrences, incluant linterfrence qui pourrait affecter le bon fonctionnement de cet appareil. B5CH118AA Product Manual DRU-E 5 GHz WLAN Radio Module Page 15 of 17 Pour rduire le potentiel dinterfrence radio sur dautres utilisateurs, le type dantenne et son gain doivent tre choisies tel que la Puissance Isotrope Rayonne Equivalente (PIRE) ne dpasse pas le niveau ncessaire pour une communication efficace. Cet appareil Digitale de Classe B rencontre toutes les normes du Canadian Interference-Causing Equipment Regulations. RF Exposure Statement This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C and Health Canada Safety Code 6, and found to be compliant to the requirements set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF exposure from radio frequency devices. This device complies with IC and FCC RF exposure limits for an uncontrolled environment. The radiated output power of this Wireless LAN device is below the IC and FCC radio frequency exposure limits. However, this device should be installed and used in such a manner that the potential for human contact during normal operation is minimized. In order to comply with RF exposure limits, this equipment should be installed and operated at a minimum distance between the radiator and a human body. This minimum distance is:
DRU-E 2.4 GHz radio DRU-E 5 GHz radio Max E.I.R.P 37.85 dB 39.95 dB Minimum Safety Distance 14.2 inches Cet appareil radio LAN sans-fils a t valu par le FCC Bulletin OET 65C and le code de scurit 6 de sant Canada, et est conforme a toutes les normes de la section FCR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) qui sadressent a lexposition FR dappareil utilisant des frquences radios. Cet appareil se conforme selon IC et FCC RF pour lexposition maximum dans un environnement non-contrl. Le puissance de rayonnement de cet appareil LAN B5CH118AA Product Manual DRU-E 5 GHz WLAN Radio Module Page 16 of 17 est dessous les limites dexposition de frquences radio selon IC et FCC. Toutefois, cet appareil doit tre install et utilise de manire a limiter au minimum le contact humain durant son utilisation normal. Afin de respecter lexposition limite des FR, cet appareil doit tre install et utilis a une distance minimale entre le radiateur et le corps humain. La distance minimale est:
DRU-E 2.4 GHz radio DRU-E 5 GHz radio Max E.I.R.P 37.85 dB 39.95 dB Distance Minimale de Sruit 14.2 inches Ericsson AB 2013. All rights reserved. No part of this document may be reproduced in any form without the written permission of the copyright owner. The contents of this document are subject to revision without notice due to continued progress in methodology, design and manufacturing. Ericsson shall have no liability for any error or damage of any kind resulting from the use of this document. B5CH118AA Product Manual DRU-E 5 GHz WLAN Radio Module Page 17 of 17
1 2 3 4 5 | product manual | Users Manual | 212.38 KiB | / January 11 2011 |
B5CH118AA B5CH118AA-A A01 Product Manual DRU 5 GHz WLAN Radio Module Document Date:
Document Number:
Document Version Number:
Document Status:
Sept 8, 2011 B5CH118AA 1 Release Copyright 2010 by BelAir Networks. All rights reserved. Page 1 of 16 B5CH118AA-A A01 Product Manual DRU 5 GHz WLAN Radio Module Contents About this Document ................................................................... 2 Introduction .................................................................................. 3 Conditions of Use ......................................................................... 4 Module Installation and Service ................................................. 5 Final Product Requirements ........................................................ 6 Regulatory Statements .............................................................. 13 About this Document This document is a product manual for the DRU 5 GHz WLAN Radio Module, including its limitations on use in any product marketed or offered for sale. It is intended as a supplement to training and documentation by BelAir Networks Inc. or its authorized agents. Page 2 of 16 B5CH118AA-A A01 Product Manual DRU 5 GHz WLAN Radio Module Introduction The B5CH118AA (hereafter referred to as the module) is a 5 GHz radio module compatible with the IEEE 802.11 standard for Wireless LAN operation. It is designed to be interoperable with WLAN products which are based on Orthogonal Frequency Division Multiplexing (OFDM) radio technology. The module contains a complete IEEE 802.11a/n radio and Medium Access Control
(MAC) protocol engine which allows implementation of an IEEE 802.11a/n access point (AP). The module is not intended for stand-alone operation. It will only be marketed as a complete product, in conjunction with a package, DC power supply and antennas
(hereafter referred to as the product or the final product). The module can be used in the 5 GHz ISM unlicensed bands. Since the module has a BelAir networks proprietary digital interface, it cannot be directly connected to any standard telecommunications or computer devices. It can only be used with final products designed and authorized specifically for that purpose. Page 3 of 16 B5CH118AA-A A01 Product Manual DRU 5 GHz WLAN Radio Module Conditions of Use General Conditions of Use This manual is intended to supplement training provided by BelAir Networks or authorized parties. The module B5CH118AA is only intended for use in BelAir Networks products and is not for sale to the general public as a stand-alone module. Please read this entire document, including the Regulatory Statements section before attempting to install or operate the module. Warning: Any use of B5CH118AA in any manner which is not expressly specified within this manual or specifically approved by BelAir Networks or its authorized agents will void the users right to operate this module, and is expressly forbidden by BelAir Networks. This includes any modification of the module, installation of the module in a configuration or used with antennas which are not expressly listed in this document or approved by BelAir Networks. Page 4 of 16 B5CH118AA-A A01 Product Manual DRU 5 GHz WLAN Radio Module Country of Use B5CH118AA is certified with limited modular approval for use as an Intentional Radiator in the United States as device: FCC ID: RAR50005001 and in Canada as IC: 4674A-50005001. Please read all regulatory statements at the end of this document before any attempt to install or operate this module. The module is only certified for operation in the United States and Canada. Before attempting to install and operate this module in any other country, contact BelAir Networks for approval. Module Labeling One or more labels are applied to the module during manufacture, including a label which identifies the FCC and Industry Canada identification numbers. Do not attempt to remove any labels from the module. Module Installation and Service Installation into a Product The module shall only be installed by a technician trained by BelAir Networks or its authorized agents. It should only be installed into an approved product (see above) following all manufacturing and service procedures for that product. The module should only be installed into a final product in a manufacturing or service depot site. Caution: B5CH118AA is an electro-static discharge (ESD) sensitive device. All appropriate ESD measures must be taken when handling the module. Failure to employ appropriate ESD protection may damage the module. Module Service The module is not intended as a field-serviceable unit. It contains no field-
replaceable or field-serviceable parts, or any external adjustable mechanisms. The module should only be serviced in a manufacturing or service depot site approved by BelAir Networks or its authorized agents. Page 5 of 16 B5CH118AA-A A01 Product Manual DRU 5 GHz WLAN Radio Module Final Product Requirements The requirements below apply to any final product in which the B5CH118AA module is installed. Antenna Usage and Module Transmit Power The DRU 5GHz radio module supports MIMO 3x3 configuration with three transmit chains and three receive chains. The B5CH118AA module shall only be used at the following output power levels in conjunction with the following antenna types as outlined in the tables that follow. 5725-5850 MHz Part 15 Subpart E For operation in the 5725-5850 MHz NII band, the B5CH118AA may be set to operate on 20 MHz. Table 8.3-2: Power and EIRP results for 3x3 MIMO 802.11n (SM-MIMO and STBC operation) Frequency
(MHz) 5740 5800 5825 Conducted Conducted Conducted Avg. Power ANT 1
(mW) 154.195 214.642 213.854 Avg. Power ANT 2
(mW) 139.172 205.475 182.772 Avg. Power ANT 3
(mW) 143.151 159.745 181.802 Combined Output Power
(dBm) 26.40 27.63 27.62 Conducted Output Power Limit
(dBm) 30.00 30.00 30.00 Conducted Output Power Antenna Margin
(dB) 3.60 2.37 2.38 Gain
(dBi) 6.50 6.50 6.50 Cable loss
(dB) 0.5 0.5 0.5 EIRP
(dBm) 32.40 33.63 33.62 EIRP Limit
(dBm) 36.0 36.0 36.0 EIRP Margin
(dB) 3.60 2.37 2.38 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Page 6 of 16 B5CH118AA-A A01 Product Manual DRU 5 GHz WLAN Radio Module 5725-5850 MHz Part 15.247 Subpart C For operation in the 5725-5850 MHz ISM band, the B5CH118AA may be set to operate on 20 MHz and 40 MHz channel bandwidths. POINT-TO-MULTIPOINT (MAXIMUM OUTPUT POWER SHOWN AS PTX):
Channel bandwidth
(MHz) 20 40 Table 8.3-1: Power and EIRP results for not correlated 33 MIMO, 802.11n Frequency
(MHz) 5740 5800 5825 5750 5790 Conducted Conducted Conducted Conducted Conducted Power ANT Power ANT Power ANT Avg. 1
(mW) 258.978 308.397 252.477 179.904 186.413 Avg. 2
(mW) 219.048 266.877 245.572 145.592 171.952 Avg. 3
(mW) 218.375 251.935 238.694 152.486 152.800 Combined Output Power
(dBm) 28.43 29.18 28.67 26.79 27.09 Output Power Limit
(dBm) 30.00 30.00 30.00 30.00 30.00 Output Power Margin
(dB) 1.57 0.82 1.33 3.21 2.91 Antenna Gain
(dBi) 6.50 6.50 6.50 6.50 6.50 Cable loss
(dB) 0.5 0.5 0.5 0.5 0.5 EIRP
(dBm) 34.43 35.18 34.67 32.79 33.09 EIRP Limit
(dBm) 36.0 36.0 36.0 36.0 36.0 EIRP Margin
(dB) 1.57 0.82 1.33 3.21 2.91 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Combined 3 antennae gain (dBi) = 6.5 [dBi] + 10Log10(3) = 11.27 dBi Limit (dBm) = 30 ((11.27 0.5) (6.5 0.5)) = 30 (10.77 6.0) = 25.23 dBm Frequency
(MHz) 5740 5800 5825 Table 8.3-2: Power and EIRP results for not correlated 33 MIMO, 802.11a Conducted Conducted Avg. Power ANT 2
(mW) 150.168 167.860 145.592 Avg. Power ANT 3
(mW) 152.800 158.667 152.486 Combined Output Power
(dBm) 26.76 27.14 26.56 Conducted Output Power Limit
(dBm) 30.00 30.00 30.00 Conducted Output Power Antenna Margin
(dB) 3.24 2.86 3.44 Gain
(dBi) 6.50 6.50 6.50 Cable loss
(dB) 0.5 0.5 0.5 EIRP
(dBm) 32.76 33.14 32.56 EIRP Limit
(dBm) 36.0 36.0 36.0 EIRP Margin
(dB) 3.24 2.86 3.44 Conducted Avg. Power ANT 1
(mW) 170.876 190.523 154.635 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Table 8.3-3: Power and EIRP results for correlated 33 MIMO (CDD/TXBF), 802.11n Frequency
(MHz) 5740 5800 5825 5750 5790 Conducted Conducted Conducted Conducted Conducted Power ANT Power ANT Power ANT Avg. 1
(mW) 114.412 108.002 115.169 118.614 105.095 Avg. 2
(mW) 98.730 108.976 108.231 98.017 101.559 Avg. 3
(mW) 109.247 101.075 106.576 100.255 77.897 Combined Output Power
(dBm) 25.08 25.02 25.18 25.01 24.54 Output Power Limit
(dBm) 25.23 25.23 25.23 25.23 25.23 Output Power Margin
(dB) 0.15 0.21 0.05 0.22 0.69 Antenna Gain
(dBi) 11.27 11.27 11.27 11.27 11.27 Cable loss
(dB) 0.5 0.5 0.5 0.5 0.5 EIRP
(dBm) 35.85 35.79 35.95 35.78 35.31 EIRP Limit
(dBm) 36.0 36.0 36.0 36.0 36.0 EIRP Margin
(dB) 0.15 0.21 0.05 0.22 0.69 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Combined 3 antennae gain (dBi) = 6.5 [dBi] + 10Log10(3) = 11.27 dBi Limit (dBm) = 30 ((11.27 0.5) (6.5 0.5)) = 30 (10.77 6.0) = 25.23 dBm Page 7 of 16 Channel bandwidth
(MHz) 20 40 B5CH118AA-A A01 Product Manual DRU 5 GHz WLAN Radio Module Table 8.3-4: Power and EIRP results for correlated 33 MIMO (CDD/TXBF), 802.11a Frequency
(MHz) 5740 5800 5825 Conducted Conducted Conducted Avg. Power ANT 1
(mW) 108.816 123.704 112.131 Avg. Power ANT 2
(mW) 97.136 112.594 103.394 Avg. Power ANT 3
(mW) 105.151 90.544 107.960 Combined Output Power
(dBm) 24.93 25.14 25.10 Conducted Output Power Limit Conducted Output Power
(dBm) 25.23 25.23 25.23 Margin
(dB) 0.30 0.09 0.13 Antenna Gain
(dBi) 11.27 11.27 11.27 Cable loss
(dB) 0.5 0.5 0.5 EIRP
(dBm) 35.70 35.91 35.87 EIRP Limit
(dBm) 36.0 36.0 36.0 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Combined 3 antennae gain (dBi) = 6.5 [dBi] + 10Log10(3) = 11.27 dBi Limit (dBm) = 30 ((11.27 0.5) (6.5 0.5)) = 30 (10.77 6.0) = 25.23 dBm Table 8.3-5: Power and EIRP results for correlated 23, 22 MIMO (CDD/TXBF), 802.11n EIRP Margin
(dB) 0.30 0.09 0.13 Frequency
(MHz) 5740 5800 5825 5750 5790 Conducted Conducted Conducted Conducted Conducted Power ANT Power ANT Power ANT Avg. 1
(mW) 258.978 248.781 252.477 179.904 186.413 Avg. 2
(mW) 219.048 223.106 245.572 145.592 171.952 Avg. 3
(mW) N/A N/A N/A N/A N/A Combined Output Power
(dBm) 26.79 26.74 26.97 25.13 25.54 Output Power Limit
(dBm) 27.00 27.00 27.00 27.00 27.00 Output Power Margin
(dB) 0.21 0.26 0.03 1.87 1.46 Antenna Gain
(dBi) 9.50 9.50 9.50 9.50 9.50 Cable loss
(dB) 0.5 0.5 0.5 0.5 0.5 EIRP
(dBm) 35.79 35.74 35.97 34.13 34.54 EIRP Limit
(dBm) 36.0 36.0 36.0 36.0 36.0 EIRP Margin
(dB) 0.21 0.26 0.03 1.87 1.46 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Combined 2 antennae gain (dBi) = 6.5 [dBi] + 10Log10(2) = 9.5 dBi Limit (dBm) = 30 ((9.5 0.5) (6.5 0.5)) = 30 (9.0 6.0) = 27.00 dBm Channel bandwidth
(MHz) 20 40 Table 8.3-6: Power and EIRP results for correlated 23, 22 MIMO (CDD/TXBF), 802.11a Frequency
(MHz) 5740 5800 5825 Conducted Conducted Conducted Avg. Power ANT 1
(mW) 170.876 190.523 154.635 Avg. Power ANT 2
(mW) 150.168 167.860 145.592 Avg. Power ANT 3
(mW) N/A N/A N/A Combined Output Power
(dBm) 25.07 25.54 24.77 Conducted Output Power Limit
(dBm) 27.00 27.00 27.00 Conducted Output Power Antenna Margin
(dB) 1.93 1.46 2.23 Gain
(dBi) 9.50 9.50 9.50 Cable loss
(dB) 0.5 0.5 0.5 EIRP
(dBm) 34.07 34.54 33.77 EIRP Limit
(dBm) 36.0 36.0 36.0 EIRP Margin
(dB) 1.93 1.46 2.23 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Combined 2 antennae gain (dBi) = 6.5 [dBi] + 10Log10(2) = 9.5 dBi Limit (dBm) = 30 ((9.5 0.5) (6.5 0.5)) = 30 (9.0 6.0) = 27.00 dBm Table 8.3-7: Power and EIRP results for correlated 13, 12, 11 MIMO (CDD/TXBF), 802.11n Frequency
(MHz) 5740 5800 5825 5750 5790 Conducted Conducted Conducted Conducted Conducted Power ANT Power ANT Power ANT Avg. 1
(mW) 258.978 308.397 252.477 179.904 186.413 Avg. 2
(mW) N/A N/A N/A N/A N/A Avg. 3
(mW) N/A N/A N/A N/A N/A Combined Output Power
(dBm) 24.13 24.89 24.02 22.55 22.70 Output Power Limit
(dBm) 30.00 30.00 30.00 30.00 30.00 Output Power Margin
(dB) 5.87 5.11 5.98 7.45 7.30 Antenna Gain
(dBi) 6.50 6.50 6.50 6.50 6.50 Cable loss
(dB) 0.5 0.5 0.5 0.5 0.5 EIRP
(dBm) 30.13 30.89 30.02 28.55 28.70 EIRP Limit
(dBm) 36.0 36.0 36.0 36.0 36.0 EIRP Margin
(dB) 5.87 5.11 5.98 7.45 7.30 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Page 8 of 16 Channel bandwidth
(MHz) 20 40 B5CH118AA-A A01 Product Manual DRU 5 GHz WLAN Radio Module Table 8.3-8: Power and EIRP results for correlated 13, 12, 11 MIMO (CDD/TXBF), 802.11a Frequency
(MHz) 5740 5800 5825 Conducted Conducted Conducted Avg. Power ANT 1
(mW) 152.800 158.667 152.486 Avg. Power ANT 2
(mW) N/A N/A N/A Avg. Power ANT 3
(mW) N/A N/A N/A Combined Output Power
(dBm) 152.800 158.667 152.486 Conducted Output Power Limit
(dBm) 22.33 22.80 21.89 Conducted Output Power Antenna Margin
(dB) 30.00 30.00 30.00 Gain
(dBi) 7.67 7.20 8.11 Cable loss
(dB) 6.50 6.50 6.50 EIRP
(dBm) 0.5 0.5 0.5 EIRP Limit
(dBm) 28.33 28.80 27.89 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) EIRP Margin
(dB) 36.0 36.0 36.0 Channel bandwidth
(MHz) 20 40
(mW)) Table 8.3-9: Power and EIRP results for correlated 33 MIMO (STBC/STC), 802.11n Conducted Conducted Conducted Avg. Avg. Avg. Combined Conducted Conducted 1 2
(mW)
(MHz) Frequency Power ANT Power ANT Power ANT EIRP Margin
(dB) 1.57 0.82 1.33 3.21 2.91 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 Output Power
(dBm) 28.43 29.18 28.67 26.79 27.09 EIRP Limit
(dBm) 36.0 36.0 36.0 36.0 36.0 219.048 266.877 245.572 145.592 171.952 258.978 308.397 252.477 179.904 186.413 218.375 251.935 238.694 152.486 152.800 Cable loss
(dB) 0.5 0.5 0.5 0.5 0.5 EIRP
(dBm) 34.43 35.18 34.67 32.79 33.09 Gain
(dBi) 6.50 6.50 6.50 6.50 6.50 5740 5800 5825 5750 5790 Antenna
(mW)
(mW) 3 Output Power Limit
(dBm) 30.00 30.00 30.00 30.00 30.00 Output Power Margin
(dB) 1.57 0.82 1.33 3.21 2.91 EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Table 8.3-10: Power and EIRP results for correlated 33 MIMO (STBC/STC), 802.11a Frequency
(MHz) 5740 5800 5825 Conducted Conducted Conducted Avg. Power ANT 1
(mW) 170.876 190.523 154.635 Avg. Power ANT 2
(mW) 150.168 167.860 145.592 Avg. Power ANT 3
(mW) 152.800 158.667 152.486 Combined Output Power
(dBm) 26.76 27.14 26.56 Conducted Output Power Limit
(dBm) 30.00 30.00 30.00 Conducted Output Power Antenna Margin
(dB) 3.24 2.86 3.44 Gain
(dBi) 6.50 6.50 6.50 Cable loss
(dB) 0.5 0.5 0.5 EIRP
(dBm) 32.76 33.14 32.56 EIRP Limit
(dBm) 36.0 36.0 36.0 EIRP Margin
(dB) 3.24 2.86 3.44 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Table 8.3-11: Power and EIRP results for correlated 23, 22 MIMO (STBC/STC), 802.11n Frequency
(MHz) 5740 5800 5825 5750 5790 Conducted Conducted Conducted Conducted Conducted Power ANT Power ANT Power ANT Avg. 1
(mW) 258.978 308.397 252.477 179.904 186.413 Avg. 2
(mW) 219.048 266.877 245.572 145.592 171.952 Avg. 3
(mW) N/A N/A N/A N/A N/A Combined Output Power
(dBm) 26.79 27.60 26.97 25.13 25.54 Output Power Limit
(dBm) 30.00 30.00 30.00 30.00 30.00 Output Power Margin
(dB) 3.21 2.40 3.03 4.87 4.46 Antenna Gain
(dBi) 6.50 6.50 6.50 6.50 6.50 Cable loss
(dB) 0.5 0.5 0.5 0.5 0.5 EIRP
(dBm) 32.79 33.60 32.97 31.13 31.54 EIRP Limit
(dBm) 36.0 36.0 36.0 36.0 36.0 EIRP Margin
(dB) 3.21 2.40 3.03 4.87 4.46 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Page 9 of 16 Channel bandwidth
(MHz) 20 40 B5CH118AA-A A01 Product Manual DRU 5 GHz WLAN Radio Module Table 8.3-12: Power and EIRP results for correlated 23, 22 MIMO (STBC/STC), 802.11a Frequency
(MHz) 5740 5800 5825 Conducted Conducted Conducted Avg. Power ANT 1
(mW) 170.876 190.523 154.635 Avg. Power ANT 2
(mW) 150.168 167.860 145.592 Avg. Power ANT 3
(mW) N/A N/A N/A Combined Output Power
(dBm) 25.07 25.54 24.77 Conducted Output Power Limit
(dBm) 30.00 30.00 30.00 Conducted Output Power Antenna Margin
(dB) 4.93 4.46 5.23 Gain
(dBi) 6.50 6.50 6.50 Cable loss
(dB) 0.5 0.5 0.5 EIRP
(dBm) 31.07 31.54 30.77 EIRP Limit
(dBm) 36.0 36.0 36.0 Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) POINT-TO-POINT (MAXIMUM OUTPUT POWER SHOWN AS PTX):
Table 8.3-13: Power and EIRP results for correlated 33 MIMO (TXBF), 802.11n EIRP Margin
(dB) 4.93 4.46 5.23 Frequency
(MHz) 5740 5800 5825 5750 5790 Conducted Conducted Conducted Conducted Conducted Power ANT Power ANT Power ANT Avg. 1
(mW) 258.978 308.397 252.477 179.904 186.413 Avg. 2
(mW) 219.048 266.877 245.572 145.592 171.952 Avg. 3
(mW) 218.375 251.935 238.694 152.486 152.800 Combined Output Power
(dBm) 28.43 29.18 28.67 26.79 27.09 Output Power Limit
(dBm) 30.00 30.00 30.00 30.00 30.00 Output Power Margin
(dB) 1.57 0.82 1.33 3.21 2.91 Antenna Gain
(dBi) 11.27 11.27 11.27 11.27 11.27 Cable loss
(dB) 0.5 0.5 0.5 0.5 0.5 EIRP
(dBm) 39.20 39.95 39.44 37.56 37.86 EIRP Limit
(dBm) N/A N/A N/A N/A N/A EIRP Margin
(dB) N/A N/A N/A N/A N/A Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Frequency
(MHz) 5740 5800 5825 Conducted Avg. Power ANT 1
(mW) 170.876 190.523 154.635 Table 8.3-14: Power and EIRP results for correlated 33 MIMO (TXBF), 802.11a Conducted Conducted Avg. Power ANT 2
(mW) 150.168 167.860 145.592 Avg. Power ANT 3
(mW) 152.800 158.667 152.486 Combined Output Power
(dBm) 26.76 27.14 26.56
(dBm) 30.00 30.00 30.00 Conducted Output Power Limit Conducted Output Power Margin
(dB) 3.24 2.86 3.44 Antenna Gain
(dBi) 11.27 11.27 11.27 Cable loss
(dB) 0.5 0.5 0.5 EIRP
(dBm) 37.53 37.91 37.33 EIRP Limit
(dBm) N/A N/A N/A EIRP Margin
(dB) N/A N/A N/A Combined output power (dBm) = 10 Log10 (Conducted Avg. Power ANT-1 (mW) + Conducted Avg. Power ANT-2 (mW) + Conducted Avg. Power ANT-3 (mW)) EIRP (dBm) = Combined output power (dBm) + ((Antenna gain (dBi) - Cable loss (dB)) Page 10 of 16 Channel bandwidth
(MHz) 20 40 B5CH118AA-A A01 Product Manual DRU 5 GHz WLAN Radio Module Certified Antennas:
The following antennas are certified for use:
Manufacturer Part#
Gain(dBi) BelAir BMAG00291A 6.5 Type OMNI In order to comply with the FCC and Industry Canada rules in the USA and Canada, respectively, it is required to respect the maximum transmit power limits as follows for each of the antenna types as indicated in the above tables. Warning: Use of this module in conjunction with any antenna not expressly listed above will void authority to install or operate this equipment. Warning: Setting of module transmit power above the limits specified in the above table for a particular combination of antenna type, frequency of operation, and type of usage, will exceed FCC or Industry Canada limits and void authority to install or operate this equipment. Product Installation Products which contain B5CH118AA shall only be installed by professional installers trained by BelAir Networks or its authorized agents. This product is to be installed on fixed permanent structures. In addition to normal installation procedures and good installation practice, professional installers are responsible to ensure that:
1. Only an approved antenna (see above) is connected to the module, and, 2. The antenna is mounted in such a manner and in such a location that access to the antenna by the general population is minimized. Access to the antenna by the general population should be limited to more than the minimum safety distance. This distances are outlined according to product type and whether high gain antennas are used:
DRUE2.4GHzradio DRUE5GHzradio MaxE.I.R.P 37.85dB 39.95dB MinimumSafety Distance 14.2inches Page 11 of 16 B5CH118AA-A A01 Product Manual DRU 5 GHz WLAN Radio Module Adherence to these rules by the professional installer is mandatory. See full installation procedures for the particular product for details. Product Labeling The following permanent label, or one containing equivalent information, must be affixed in a conspicuous location on the exterior of every product containing this module:
This device ccontains the following:
FCC ID: RAR50002001 Page 12 of 16 B5CH118AA-A A01 Product Manual DRU 5 GHz WLAN Radio Module Regulatory Statements The following regulatory notes apply to the product which contains module B5CH118AA. The following sections or equivalent information shall appear in the user-manual of the final product. Regulatory Information and Disclaimers Installation and use of this device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications to this product not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. The manufacturer is not responsible for any interference to radio or television equipment caused by unauthorized modification of this device, or attachment of any antennas or equipment other than those specified by the manufacturer. The manufacturer or its authorized resellers or distributors will assume no liability for any damage or violation of government regulations arising from failing to comply with these guidelines. Manufacturers FCC Conformity Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Page 13 of 16 B5CH118AA-A A01 Product Manual DRU 5 GHz WLAN Radio Module Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Manufacturers Industry Canada Conformity Statement This device has been designed to operate with an antenna having a maximum gain of 6.5 dBi. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. This device has been designed to ensure that radio frequency emissions are maintained within the band of operation under all normal operating conditions listed in this manual. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropic radiated power (EIRP) is not more than that required for successful communication. This Class B Digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil a t conu pour fonctionner avec une antenne avec un gain maximum de 4.5dBi. Lutilisation d antennes de gain suprieur est strictement dfendue selon la rglementation dIndustrie Canada. Cet appareil a t conu a garantir que les missions de frquences radio soit maintenues dans la bande dopration sous toutes les conditions nonc dans ce manuel. Son utilisation est soumise aux deux conditions suivantes: (1) Cet appareil ne doit pas tre la cause dinterfrence, et (2) cet appareil doit pouvoir tre capable de recevoir toutes sortes dinterfrences, incluant linterfrence qui pourrait affecter le bon fonctionnement de cet appareil. Page 14 of 16 B5CH118AA-A A01 Product Manual DRU 5 GHz WLAN Radio Module Pour rduire le potentiel dinterfrence radio sur dautres utilisateurs, le type dantenne et son gain doivent tre choisies tel que la Puissance Isotrope Rayonne Equivalente (PIRE) ne dpasse pas le niveau ncessaire pour une communication efficace. Cet appareil Digitale de Classe B rencontre toutes les normes du Canadian Interference-Causing Equipment Regulations. RF Exposure Statement This Wireless LAN radio device has been evaluated under FCC Bulletin OET 65C and Health Canada Safety Code 6, and found to be compliant to the requirements set forth in CFR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) addressing RF exposure from radio frequency devices. This device complies with IC and FCC RF exposure limits for an uncontrolled environment. The radiated output power of this Wireless LAN device is below the IC and FCC radio frequency exposure limits. However, this device should be installed and used in such a manner that the potential for human contact during normal operation is minimized. In order to comply with RF exposure limits, this equipment should be installed and operated at a minimum distance between the radiator and a human body. This minimum distance is:
DRUE2.4GHzradio DRUE5GHzradio MaxE.I.R.P 37.85dB 39.95dB MinimumSafety Distance 14.2inches Cet appareil radio LAN sans-fils a t valu par le FCC Bulletin OET 65C and le code de scurit 6 de sant Canada, et est conforme a toutes les normes de la section FCR 47 Sections 2.1091, 2.1093, and 15.247 (b) (4) qui sadressent a lexposition FR dappareil utilisant des frquences radios. Cet appareil se conforme selon IC et FCC RF pour lexposition maximum dans un environnement non-contrl. Le puissance de rayonnement de cet appareil LAN Page 15 of 16 B5CH118AA-A A01 Product Manual DRU 5 GHz WLAN Radio Module est dessous les limites dexposition de frquences radio selon IC et FCC. Toutefois, cet appareil doit tre install et utilise de manire a limiter au minimum le contact humain durant son utilisation normal. Afin de respecter lexposition limite des FR, cet appareil doit tre install et utilis a une distance minimale entre le radiateur et le corps humain. La distance minimale est:
DRUE2.4GHzradio DRUE5GHzradio MaxE.I.R.P 37.85dB 39.95dB DistanceMinimalede Sruit 14.2inches BelAir Networks Inc. 603 March Road Kanata, Ontario Canada K2K 2M5 613-254-7070 Sales sales@belairnetworks.com Support support@belairnetworks.com General Information Info@belairnetworks.com Page 16 of 16
frequency | equipment class | purpose | ||
---|---|---|---|---|
1 | 2015-09-29 | 5755 ~ 5815 | NII - Unlicensed National Information Infrastructure TX | Class II permissive change or modification of presently authorized equipment |
2 | 2015-01-06 | 5190 ~ 5230 | NII - Unlicensed National Information Infrastructure TX | |
3 | 2014-07-29 | 5190 ~ 5210 | NII - Unlicensed National Information Infrastructure TX | |
4 | 2011-11-01 | 5750 ~ 5790 | DTS - Digital Transmission System | Original Equipment |
5 | 5740 ~ 5805 | NII - Unlicensed National Information Infrastructure TX |
app s | Applicant Information | |||||
---|---|---|---|---|---|---|
1 2 3 4 5 | Effective |
2015-09-29
|
||||
1 2 3 4 5 |
2015-01-06
|
|||||
1 2 3 4 5 |
2014-07-29
|
|||||
1 2 3 4 5 |
2011-11-01
|
|||||
1 2 3 4 5 | Applicant's complete, legal business name |
Ericsson Wi-Fi
|
||||
1 2 3 4 5 | FCC Registration Number (FRN) |
0022616338
|
||||
1 2 3 4 5 | Physical Address |
6300 Legacy Drive
|
||||
1 2 3 4 5 |
Plano, Texas 75024
|
|||||
1 2 3 4 5 |
United States
|
|||||
app s | TCB Information | |||||
1 2 3 4 5 | TCB Application Email Address |
S******@nemko.com
|
||||
1 2 3 4 5 |
s******@nemko.com
|
|||||
1 2 3 4 5 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
app s | FCC ID | |||||
1 2 3 4 5 | Grantee Code |
RAR
|
||||
1 2 3 4 5 | Equipment Product Code |
50005001
|
||||
app s | Person at the applicant's address to receive grant or for contact | |||||
1 2 3 4 5 | Name |
R******** A******** S****
|
||||
1 2 3 4 5 | Title |
R&D Wi-Fi Products
|
||||
1 2 3 4 5 | Telephone Number |
(613)********
|
||||
1 2 3 4 5 | Fax Number |
(613)********
|
||||
1 2 3 4 5 |
r******@ericsson.com
|
|||||
app s | Technical Contact | |||||
1 2 3 4 5 | Firm Name |
Ericsson Canada Inc.
|
||||
1 2 3 4 5 |
BelAir Networks Inc.
|
|||||
1 2 3 4 5 | Name |
A****** S****
|
||||
1 2 3 4 5 |
R**** A******** S********
|
|||||
1 2 3 4 5 | Physical Address |
349 Terry Fox Drive
|
||||
1 2 3 4 5 |
603 March Road
|
|||||
1 2 3 4 5 |
Ottawa, K2K 2V6
|
|||||
1 2 3 4 5 |
Kanata, K2K 2M5
|
|||||
1 2 3 4 5 |
Canada
|
|||||
1 2 3 4 5 | Telephone Number |
+1 (6********
|
||||
1 2 3 4 5 |
613-2******** Extension:
|
|||||
1 2 3 4 5 | Fax Number |
613-2********
|
||||
1 2 3 4 5 |
a******@ericsson.com
|
|||||
1 2 3 4 5 |
r******@belairnetworks.com
|
|||||
app s | Non Technical Contact | |||||
n/a | ||||||
app s | Confidentiality (long or short term) | |||||
1 2 3 4 5 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
1 2 3 4 5 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No | ||||
if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
1 2 3 4 5 | Is this application for software defined/cognitive radio authorization? | No | ||||
1 2 3 4 5 | Equipment Class | NII - Unlicensed National Information Infrastructure TX | ||||
1 2 3 4 5 | DTS - Digital Transmission System | |||||
1 2 3 4 5 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | DRU-E 5 GHz radio | ||||
1 2 3 4 5 | DRUE 5 GHz radio | |||||
1 2 3 4 5 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
1 2 3 4 5 | Modular Equipment Type | Does not apply | ||||
1 2 3 4 5 | Limited Single Modular Approval | |||||
1 2 3 4 5 | Purpose / Application is for | Class II permissive change or modification of presently authorized equipment | ||||
1 2 3 4 5 | Original Equipment | |||||
1 2 3 4 5 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | Yes | ||||
1 2 3 4 5 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
1 2 3 4 5 | Yes | |||||
1 2 3 4 5 | Grant Comments | Power listed is conducted. This device must be professionally installed. The antenna (s) used for this transmitter must be installed to provide a separation distance from all persons as described in this filing and must not be co-located or operating in conjunction with any other antenna or transmitter except as described in this filing. End-users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. | ||||
1 2 3 4 5 | Power listed is aggregate conducted output power. This device has a 20 MHz and 40 MHz bandwidth mode, and operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance from all persons as described in this filing and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance | |||||
1 2 3 4 5 | Power listed is aggregate conducted output power. This device has a 20 MHz and 40 MHz bandwidth mode, and operates with specific antennas in MIMO configurations as described in this filing. The antenna(s) used for this transmitter must be installed to provide a separation distance from all persons as described in this filing and must not be co-located or operating in conjunction with any other antenna or transmitter. Users and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. | |||||
1 2 3 4 5 | Is there an equipment authorization waiver associated with this application? | No | ||||
1 2 3 4 5 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
app s | Test Firm Name and Contact Information | |||||
1 2 3 4 5 | Firm Name |
Nemko Canada Inc. (Ottawa)
|
||||
1 2 3 4 5 | Name |
C******** N******
|
||||
1 2 3 4 5 | Telephone Number |
613-7******** Extension:
|
||||
1 2 3 4 5 | Fax Number |
613-7********
|
||||
1 2 3 4 5 |
c******@nemko.com
|
|||||
Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
1 | 1 | 15E | 39 CC MO | 5740 | 5825 | 0.508 | |||||||||||||||||||||||||||||||||||
1 | 2 | 15E | 39 CC MO | 5755 | 5815 | 0.48 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
2 | 1 | 15E | 39 CC MO | 5180 | 5240 | 0.421 | |||||||||||||||||||||||||||||||||||
2 | 2 | 15E | 39 CC MO | 5190 | 5230 | 0.153 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
3 | 1 | 15E | 39 CC MO | 5180 | 5220 | 0.425 | |||||||||||||||||||||||||||||||||||
3 | 2 | 15E | 39 CC MO | 5190 | 5210 | 0.165 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
4 | 1 | 15C | CC MO | 5740 | 5825 | 0.83 | |||||||||||||||||||||||||||||||||||
4 | 2 | 15C | CC MO | 5750 | 5790 | 0.51 | |||||||||||||||||||||||||||||||||||
Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
5 | 1 | 15E | CC MO | 5740.00000000 | 5805.00000000 | 0.5800000 |
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC