FCC ID: QKL95I Radar Detector

GPS Powered for Speed and Location Intelligence Designed in the USA ESCORT Inc. 5440 West Chester Road West Chester OH 45069 800.433.3487 www.EscortRadar.com 2011 ESCORT Inc. ESCORT, PASSPORT, TrueLock, SpeedAlert, AutoLearn, AutoSensitivity, AutoVolume, SmartMute, MuteDisplay, SpecDisplay, and ExpertMeter are trademarks of ESCORT Inc. SWS is a trademark of SWS, L.C. Features, specications and prices subject to change without notice. R A D A R L A S E R S A F E T Y D E T E C T O R Owners Manual Congratulations Quick Reference Card The PASSPORT 9500ix delivers extreme Youve just purchased the most intelligent radar and laser detector in the worldthe PASSPORT 9500ix. long-range warning on all radar bands including X, K, Superwide Ka, Ku and instant-on POP modes. Multiple front and rear laser sensors provide 360 degree laser protection, including the widest eld of view. For the ultimate in Laser protection, the PASSPORT 9500ix can also be used in conjunction with our Laser Shifter product. Visit our website at EscortRadar.com or call us toll-free at 800-433-3487 for more details. The PASSPORT 9500ixs GPS-powered intelligence provides permanent relief from false alarms including automatic door openers, motion sensors and other radar-

based sensors. And, it comes pre-loaded with thousands of red light and xed position speed camera locations throughout North America. In addition, the PASSPORT 9500ix introduces the following state-of-the-art performance and features:

New AutoLearn feature automatically learns and rejects false radar sources based on exact location and frequency. New AutoPower feature automatically shuts off the detector to save unnecessary drain on your battery. New Safety Camera Database stores thousands of red light and xed position speed cameras throughout North America. New web-ready access allows you to update your safety camera data and other software through our website. Revolutionary AutoSensitivity mode provides real-time radar performance based on vehicle speed, plus Highway and Auto No X settings. SpeedAlert feature provides an instant view of your vehicles speed during an alert. Mark Location feature allows you to instantly Mark known speed traps, cameras and other places of interest. Easy-to-use Preferences allow you to customize up to 11 features. Ultra-bright alphanumeric display with 280 LEDs. Exclusive ExpertMeter tracks and displays up to 8 radar signals simultaneously. Exclusive SpecDisplay provides actual numeric frequency for any radar signal. Selectable radar and laser bands (on/

off) allow you to customize which bands are monitored. Selectable Markers (on/off) allow you to customize which Markers are monitored. Includes exclusive SmartCord for easy access to Mute and TrueLock features. If youve used a radar detector before, a review of the Quick Reference Guide on pages 4 and 5, and the Preferences information on pages 14-18 will briey explain the new features. If this is your rst detector, please read the manual in detail to get the most out of your PASSPORTs revolutionary performance and innovative features. Please drive safely. 1 Remove card along perforations PASSPORT 9500ix Quick Reference Card The buttons labeled MRK and BRT There are 11 user-selectable options so you can customize your 9500ix for your own preferences. are also used to enter the Preferences Mode, REVIEW your current Preferences settings, and to CHANGE any settings as desired. The words PREF, MRK and BRT are located on the top of the detector. How to use EZ-Preferences 1 To enter Preferences, press and hold the MRK and BRT buttons down for 2 seconds. The unit will beep twice, and will display the word Prefs. 2 Then press the BRT button to review the categories. You can either tap the button to change categories, or simply hold the button down to scroll through the categories. 3 Press the MRK button to change any setting. You can either tap the button to change from setting to setting, or hold the button down to scroll through all the options. 4 To exit Preferences, simply wait 8 seconds without pressing any button, or press the power button. The unit will display Complete, beep 4 times, and return to normal operation. Restoring the Factory Default Settings To restore your PASSPORT to its original factory settings, press and hold the SEN and BRT buttons while turning the power on. A Reset message will be displayed, accompanied by an audible alert, acknowledging the reset. An example:

Here is how you would turn PASSPORTs AutoMute feature off:

1 Enter the Preferences Mode by holding both the MRK and BRT buttons down for 2 seconds. PASSPORT will beep twice and display Prefs. 2 Then hold the BRT button down. PASSPORT will scroll through the categories, starting with Pilot (Pilot), then SpeedAlert (sAlrt), then Power-on sequence (PwrOn), AutoLearn (aLrn), then Signal Strength meter (Meter), and then AutoMute (aMute). 3 Release the BRT button when PASSPORT displays the AutoMute item. Since the factory setting is for AutoMute to be on, PASSPORT will display aMute ON. Note: If you accidentally dont release the MRK button in time, and PASSPORT goes to the next category, simply hold the MRK button down again, PASSPORT will scroll through all of the categories. Once youre back to your desired category, release the MRK button. 4 Press the MRK button to change from aMute ON to aMute OFF. 5 To exit Preferences, simply wait 8 seconds without pressing any buttons, or press the power button. PASSPORT will display Complete, beep 4 times, and return to normal operation. Preferences Details s n o i t a r o f r e p g n o a d r a c e v o m e R l Quick Reference Card Remove card along perforations PASSPORT 9500ix Quick Reference Card SPEEDALERT Press the BRT button to go from one category to the next PILOT LIGHT

(Power-on indication) AUTOLEARN SIGNAL STRENGTH METER AUTOMUTE AUTOVOLUME AUTOPOWER UNITS VOICE BANDS MARKERS

* Factory Default Settings Pilot HWY Pilot H Pilot H.>

Pilot V Pilot SPD sAlrt ON sAlrt OFF aLrn ON aLrn OFF Meter STD Meter EXP Meter SPC aMute ON aMute OFF Press the MRK button to change your setting within a category

* Full word: Highway or Auto or City Letter: H or A or C Letter, with scanning dot Vehicle voltage Vehicle speed

* Displays current speed during alert SpeedAlert feature off

* Automatically locks out false alarms AutoLearn is off

* Standard signal strength meter ExpertMeter mode SpecDisplay mode

* Automatically reduces audio in alert AutoMute feature is off aVol ON

* Audio alerts increase automatically aVol OFF Audio alerts are controlled manually aPwr ON

* Turns detector off after 4 hours aPwr OFF AutoPower feature is off Units ENG

* Speed/distance in English units Units MET Speed/distance in Metric units Voice ON

* Voice announcements on Voice OFF Voice announcements off Bands DFT

* Default settings Bands MOD Bands have been modified Turn bands on/off by pressing the mute button ON or OFF (default is on) X ON or OFF (default is off) Ku ON or OFF (default is on) K Ka ON or OFF (default is on) POP ON or OFF (default is off) SWS ON or OFF (default is off) LSR ON or OFF (default is on) TSR ON or OFF (default is off) l R e m o v e c a r d a o n g p e r f o r a t i o n s Marks DFT Marks MOD rCam ON or OFF (default is on) sCam ON or OFF (default is on) sTrap ON or OFF (default is on) Othr ON or OFF (default is on) Table of Contents Quick Reference Guide Installation Power Connection Mounting Location Windshield Mount Controls and Features Power AutoPower Volume Control Power-on Indication GPS Signal Indicator Mute AutoMute TrueLock / GPS Filter AutoLearn Sensitivity (SEN) Brightness (BRT) Mark Location (MRK) Audible Alerts SmartCord SpeedAlert Signal Strength Meter ExpertMeter SpecDisplay Clearing the Database 4-5 6-7 6 6 7 8-13 8 8 8 8 8 8 9 9 9 10 10 10 11 11 12 12 12 13 13 Preferences How to use Preferences Example of Preferences Overview of Preferences Details of Preferences Technical Details Specications Interpreting Alerts How Radar Works How POP Works How Laser Works How Red Light Cameras Work How Speed Cameras Work How SWS Works TSR Signal Ranking Software How GPS Works Software Updates Service Service Troubleshooting Accessories Warranty 14-18 14 14 15 16-18 19-26 19 20-21 22 22 23 23 24 24-25 26 26 26 27-33 27 28-29 30 33 2 3 Quick Reference Guide To begin using your PASSPORT, just follow these simple steps 1 Plug the small end of the power cord into the side jack of the detector, and plug the large end of the power cord into your cars accessory socket. 2 Mount your PASSPORT on the wind-

shield using the supplied windshield mount. 3 Press the power button, located on the top case. Adjust the volume level by pressing the VOL + or buttons, also located on the top case. Please read the manual to fully understand PASSPORTs operation and features. Preferences PASSPORT is ready to go, just plug it in and turn it on. But you can also easily change 11 features for your preferences. Pages 14-18 Radar Antenna and Laser Lens The rear panel of your PASSPORT should have a clear view of the road ahead. For best performance, do not mount PASSPORT directly behind windshield wipers or tinted areas. Page 6 EasyMount Slot Insert PASSPORTs adjustable Windshield mount into this slot. Page 7 Rear Laser Port Receives laser signals from behind the vehicle. EasyMount Button Press the button, and slide the windshield mount into one of its four locking positions. Page 7 Earphone Jack Accepts standard 3.5mm mono earphone. Power Jack Plug the SmartCord into this connector. Page 6 TrueLock/GPS Filter Switches TrueLock feature (stored locations) on or off. Page 9 Sensitivity Button Switches between Highway, Auto, and Auto NoX settings. In general, we recom-

mend the Auto mode. Page 10 Volume Adjustment Increases or decreases the alert volume. Alphanumeric Display PASSPORTs display will show Highway, Auto, or Auto Nox as its power-on indication. If you prefer, you can choose other power-on indications. Pages 16-17 During an alert, the display will indicate radar band and a precise bar-

graph of signal strength. Page 12 display will not light during an alert. NOTE: In the Dark Mode the 4 5 USB Data Port This allows you to update your database,

(red light and xed position speed cameras) and other software from our website. Power Button Press this button to turn PASSPORT on or off. Page 8 Mark Location Press to mark a specic location (e.g. speed trap, etc.). Page 10 Brightness Button Press to adjust the display brightness. There are three brightness settings, plus Dark Mode. will remain dark and only the audio will alert you. Page 10 In the Dark Mode, PASSPORTs display GPS Signal Indicator The GPS icon indicates reception of GPS satellite signals and conrms TrueLock signal rejection. Page 8 Mute Button Briey press this button (next to the display) to silence the audio for a specic alert. (The audio will alert you to the next encounter.) Page 8 Installation Power Connection To power PASSPORT, plug the small end of the SmartCord, (telephone-type connector) into the modular jack on PASSPORTs left side, and plug the lighter plug adapter into your vehicles lighter socket or accessory socket. PASSPORT operates on 12 volts DC negative ground only. The lighter plug provided is a standard size and will work in most vehicles. However, some vehicles may require our optional sleeve to ensure a snug t. If so, simply call or visit our website. NOTE: depending on your vehicle, the lighter socket power may either be continuously on, or it may be switched on and off with your ignition switch. Optional power cords Call or visit our website for our optional Direct-wire SmartCord. Mounting Location WARNING: ESCORT cannot anticipate the many ways PASSPORT can be mounted. It is important that you mount PASSPORT where it will not impair your view nor present a hazard in case of an accident. Where to mount PASSPORT For optimum detection performance, we recommend the following:

Using the supplied windshield mount, mount your PASSPORT level and high enough on your front windshield to provide a clear view of the road ahead. For optimum rear detection, center the detector between the driver and passenger. Mount PASSPORT away from windshield wipers, other solid objects, and heavily tinted areas that might obstruct the radar antenna or laser lens. GPS-powered features to work properly, the top case must have a clear view of the sky. NOTE: In order for PASSPORTs Windshield Mount Windshield Mount PASSPORTs EasyMount windshield bracket is designed for unobtrusive and hassle-free mounting. 1 Depress the adjustment button on the top of PASSPORT (by the word ESCORT) and slide the EasyMount bracket into the slot until it is locked into the position which best ts the angle of your wind-

shield (there are four settings available). For extremely horizontal or extremely sloped windshields, the EasyMount bracket can be bent. However, we suggest that you do not do this when the bracket is connected to the detector. To ensure that the suction cups adhere to the windshield rmly, be sure to keep both your windshield and the suction cups clean. 2 To adjust PASSPORT on your wind-

shield, use the EasyMount adjustment button located on the top of the PASSPORT, and slide PASSPORT forward or backward to obtain a level position. Level mounting When installed and adjusted properly, the back top edge of PASSPORT should rest solidly against your windshield. Facing Down Facing Up Users Tip You can leave the EasyMount bracket in place on your windshield, and easily remove PASSPORT by pressing the adjust-

ment button and sliding PASSPORT off the mount. Again, be sure to position the bracket where it wont present a hazard in the event of an accident. Additional mounts are available. 6 7 Controls and Features Power To turn PASSPORT on or off, press the power button on the top case. When you turn PASSPORT on, it will provide a double beep tone, acknowledging its ready. AutoPower This feature automatically turns PASSPORT off if the vehicle has not moved for 4 hours. This is especially useful if your vehicle has a hot plug (12 volts all the time). See the Preferences section for details. Volume Control (VOL) To increase or decrease the audio volume, press and hold the (+) or () volume control buttons located on the top case. A sample alert tone will be generated, along with a corresponding bar-graph on the display. Once you have reached your desired volume level, simply release the button. This level will be stored in memory. In Preferences AutoVolume is the default. This feature will increase the audio alert level automatically when the ambient noise in the vehicle is high. See the Preferences section for details. Power-on Indication After PASSPORTs start-up sequence is complete the display will show the full word: Highway, Auto, or Auto NoX to indicate which sensitivity mode is selected. If you prefer, you can select alternate power-on indicators. See the Preferences section for details. NOTE: Satellite reception is GPS Signal Indicator The GPS signal indicator provides a visual indication that PASSPORT is receiving satellite data. required to get the most out of your PASSPORT 9500ix. To receive satellite data, the top of the detector must have a clear view of the sky. See Mounting Location for more details. until it receives satellite data. Once received, the icon will stop ashing and remain on the display. visual acknowledgement that the detector is rejecting a signal that has been stored in memory using the TrueLock feature. Once a false alarm has been stored, the GPS indicator will rotate clockwise, indicating that it is rejecting that signal. The GPS indicator will ash on and off The GPS indicator also provides a Mute The Mute button, located on PASSPORTs top panel and SmartCord, allow you to silence the audio alert during a radar encounter. To mute the audio for a specic signal, briey press the Mute button. After that radar encounter has passed, the mute will automatically reset and the audio will alert you to the next encounter. AutoMute Your PASSPORT has our patented AutoMute feature. After PASSPORT alerts you to a radar encounter at the volume you have selected, the AutoMute feature will automatically reduce the volume to a lower level. This keeps you informed without the annoyance of a continuous full-volume alert. AutoMute feature off. See the Preferences section for details. If you prefer, you can turn the To lockout a false alert, (X, K or Laser TrueLock/GPS Filter The GPS lter button turns PASSPORTs GPS-powered TrueLock feature on and off.

(default is on) only) press the mute button three (3) times, (either on the detector or the SmartCord) during the alert. Pressing the mute button the rst time will silence the audio. Pressing it a second time will generate a prompt on the display that will read: Lockout? Press it a third time to conrm that you want to lock this signal out by location and frequency. A Stored message will be displayed. Once a signal has been stored, the detector will reject this signal the next time you approach this area. (The GPS indicator will rotate clockwise, providing a visual indication that the signal is being rejected). To unlock a signal that has already been stored, simply press and hold the mute button while the GPS indicator is rotating. The display will read: Unlock?

Press the mute button again to unlock it from memory. AutoLearn The AutoLearn feature analyzes (over time) the source of radar signals by location and frequency. This allows PASSPORT to determine if a signal is a real threat or a false one. If it determines that the signal is an automatic door opener, motion sensor, etc., PASSPORT automatically locks out this source at this particular location. A stored message, accompanied by a single beep, will appear on the display when a signal has been automatically locked out. NOTE: AutoLearn typically needs to see the exact frequency in the same location approximately three times to lock it out. Since some door openers are turned on and off routinely, some variations may occur. PASSPORT will also UnLearn signals to protect you from locking out real threats. If a particular signal is no longer present at a location that was previously locked out, PASSPORT will unlock that signal. If you prefer, you can turn AutoLearn off. See the Preferences section for details. NOTE: When AutoLearn is on, 8 9 Controls and Features In the Auto mode, the 9500ix Sensitivity Switch (SEN) The SEN button selects PASSPORTs sensitivity mode. We recommend the Auto

(AutoSensitivity) mode for most driving. provides real-time radar performance based on your vehicle speed. As your vehicle speed increases, the radar sensitivity (X and K-band) is set to maximum range. As the vehicle speed decreases, the radar sensitivity (X and K-

band only) is minimized to further reduce unwanted false alarms. Full sensitivity is maintained on all other bands. Highway and Auto NoX. Highway mode provides maximum sensitivity on all bands. Auto NoX is the same as Auto mode with X-band turned off. You can also select conventional Brightness (BRT) PASSPORTs BRT button selects the brightness of PASSPORTs display and keypad. There are ve settings: Minimum

(BRT MIN), Medium (BRT MED), Maximum (BRT MAX), Auto (BRT AUTO) and Full Dark (BRT DARK). In this setting, the display and key-pad brightness will automatically adjust based on the ambient light in the vehicle. Brightness Auto (BRT AUTO) (default) BRT Dark (Full Dark Mode) When you select the Dark mode with the BRT switch, the display will not show any 10 visual alerts, (i.e. display or keypad) when PASSPORT detects signals. Only the audible alert will tell you of detected signals. In this mode, visual alerts can be seen on the SmartCord in addition to the audio alerts on the detector. Mark Location (MRK) The MRK button allows you to mark a specic location and label it for future reference. Once marked, PASSPORT will provide an alert with an arrow indicating the direction of the location when you reach this area again. This can be extremely useful when there are known speed traps or camera locations that you would like to remember. To mark a particular location, press the MRK button. The display will read:

Mark? Press the MRK button again to assign a label to it. There are four (4) labels: Red Light, Speed Camera, Speed Trap and Other. To scroll through the labels, simply press the volume (+) or () buttons until you reach the desired label. Once youve selected the label, press the MRK button again to conrm. Once youve selected the label, press the MRK button again. Once marked and assigned a label, PASSPORT provides the following alert distances:

Red Light Cameras = 250 or 10 seconds Speed Cameras = 250 or 10 seconds Speed Traps = 1/3 mile Other = 1/3 mile NOTE: When a location is marked the rst time, you must travel at least one mile away from that location to receive an alert. the MRK button when you are receiving a marked location alert. The display will read Unmark? Press the MRK again to conrm. The display will read: Unmarked. To unmark a location, simply press NOTE: If your vehicle is moving Audible Alerts For Radar signals:

When you encounter radar, a distinct audible alert will sound and occur faster,

(Geiger-counter-like) as the signal gets stronger. When the signal is very strong, the audible alerts will blend into a solid tone. This allows you to judge the distance from the signal source without taking your eyes from the road. less than 20 mph and you encounter a radar or laser signal, only a double-

tone (specic to the type of signal) is used. However, PASSPORTs meter will keep you informed of the signal strength until it has passed or until you reach a speed above 20 mph. identication:

X-band = beep tone K-band = raspy brap tone Ka-band = double-brap tone Ku-band = beep tone (same as X-band) POP = solid brap tone Each band has a distinct tone for easy 11 For Laser and POP signals:

Since laser and POP signals are a possible threat no matter how weak, PASSPORT will provide a solid audio alert for these signals. The SmartCord is a special power SmartCord PASSPORTs power jack uses a telephone-

type connector. This 4-conductor connector only works with the SmartCord

(included), or the optional Direct-wire SmartCord. cord that has a power-on indicator (which only lights up when the 9500ix is turned on), a bright alert light that warns of radar or laser, and a convenient mute button right on the plug. Its perfect for any car where reaching the detectors mute button on the windshield is a stretch. PASSPORT in the Dark mode, and use the SmartCord for your visual alerts. Other drivers wont know you have a detector. An optional Direct-wire SmartCord is also available. This version includes a small display module which can be wired directly into your electrical system, with a 10 foot straight cord to route to your PASSPORT. For more information or to order, visit our website at EscortRadar.com or call us toll-free at 1-800-433-3487. For discreet night driving, put Controls and Features Speed Alert PASSPORTs Speed Alert feature provides a visual indication of your vehicle speed during the rst few seconds of an alert. This allows you to instantly check your speed without looking at your speedometer. Speed Alert is displayed regardless of your meter setting. NOTE: When traveling 15 mph or less, your speed will not be displayed. If you prefer, you can turn the Speed Alert feature off. See Preferences for details. Signal Strength Meter PASSPORTs display provides an intuitive ultra-bright display of signal strength and text messages. PASSPORTs standard bar-

graph meter provides information on a single radar signal. If there are multiple signals present, PASSPORTs internal computer will determine which one is the most important threat to display. When PASSPORT detects radar, it displays the band (X, K, Ka, or Ku), and a precise bar-graph of the signal strength. When PASSPORT detects a laser signal the display will display LASER. PASSPORT in the Dark mode, the display will not light when a signal is detectedonly the audio and the ashing alert lamp on the SmartCord. NOTE: If you are operating ExpertMeter PASSPORTs ExpertMeter option is an advanced display for experienced detector users. Please use PASSPORT for a few weeks to get familiar with its other features before using ExpertMeter. To use the ExpertMeter instead of the bar graph signal strength meter, you must select ExpertMeter in PASSPORTs Preferences (see pages 14-17). PASSPORTs ExpertMeter simultaneously tracks up to 8 radar signals. It provides detailed information on up to 2 Ka-band, 2 K-band, and 4 X-band signals. change in your normal driving environment; for example, a trafc radar unit being operated in an area where there are normally other signals present. miniature spectrum analyzer. It shows what band each signal is on and its relative signal strength. ExpertMeter can help you spot a The ExpertMeter is actually a KA|| K|| X||||

Above is the ExpertMeter display if PASSPORT was detecting 2 strong Ka-

band, 2 strong K-band, and 4 strong X-band signals. after each band designator. Each line shows a signal being detected. The height of each line shows the relative signal strength of that signal. As you can see, there are vertical lines SpecDisplay PASSPORTS SpecDisplay option is also for the experienced detector user. In this mode, PASSPORT will display the actual numeric frequency of the radar signal being received. K 24.150 SpecDisplay shows one K-band signal at 24.150 gigahertz. NOTE: Even long-time detector users will require some amount of time to get familiar with this new level of information about detected signals. Clearing The Database At some point you may want to clear all of the data in PASSPORTS database. This includes all markers and your false alarm locations. In order to do this, simply press and hold the SEN, BRT and MUTE buttons at the same time. To conrm this action, press the GPS button. NOTE: If you use ExpertMeter, the brief signal shown in the power-on sequence when you turn on your PASSPORT will also be in ExpertMeter:

an X with a single vertical line. A few more examples will help you better see how the ExpertMeter works. K| X||

'

Here ExpertMeter shows 1 strong K-band signal, and three X-band signals, two strong and one weak. KA| X'''

Here ExpertMeter shows 1 strong Ka-band signal, and three weak X-band signals. X On very weak signals, there will be no vertical line. This shows a very weak X-band signal. ExpertMeter Details The band designators (X, K, Ka) will stay on the display for a few seconds after the signal has passed. This allows you to see what the unit detected, even on very brief signals. ing individual signals continuously change

(several times a second) to give you a continuous instantaneous view of all radar signals present. However, the vertical lines represent-

12 13 How to use Preferences There are 11 user-selectable Preferences so you can customize your 9500ix for your specic driving needs. The buttons labeled MRK and BRT are also used to enter Preferences, REVIEW your current settings, and to CHANGE any settings as desired. The word PREF is located on the top of the detector, and is highlighted in colored graphics. Pages 16-18 explain each option in more detail. How to use Preferences 1 To enter Preferences, press and hold the MRK and BRT buttons down for 2 seconds. The unit will beep twice, and will display the word Prefs. Then press the BRT button to 2 review the current settings. You can either tap the button to change from item to item, or hold the button to scroll through the items. 3 Press the MRK button to change any setting. You can either tap the button to change from setting to setting, or hold the button to scroll through all the options. To exit Preferences, simply wait 8 4 seconds without pressing any button, or

). The unit will press the power button (

display Complete, beep 4 times, and return to normal operation. An example Here is how you would turn PASSPORTs AutoMute feature o. 1 Enter Preferences by holding both the MRK and BRT buttons down for 2 seconds. PASSPORT will beep twice and display Prefs. Then hold the BRT button down. 2 PASSPORT will scroll through the categories, starting with Pilot Light (Pilot), then SpeedAlert (sAlrt), Power-on sequence

(PwrOn), then Signal strength meter

(Meter), and then AutoMute (aMute). If you accidentally dont release the BRT Release the BRT button when 3 PASSPORT shows the AutoMute item. Since the factory setting is for AutoMute to be on, PASSPORT will display aMute ON. button in time, and PASSPORT goes to the next category, simply hold the BRT button down again, and after PASSPORT scrolls through all categories, it will begin again at the top of the list. Press the MRK button to change from 4 aMute ON to aMute OFF. 5 To complete choosing your Preferences, simply wait 8 seconds without pressing any

). buttons, or press the power button (

PASSPORT will display Complete, beep 4 times, and return to normal operation. Overview of Preferences Press the BRT button to go from one category to the next PILOT LIGHT

(Power-on indication) SPEEDALERT AUTOLEARN SIGNAL STRENGTH METER AUTOMUTE AUTOVOLUME AUTOPOWER UNITS VOICE BANDS

* Restoring the Factory Default Settings To restore your PASSPORT to its original factory settings, press and hold the SEN and BRT buttons while turning the power on. A Reset message will be displayed, accompanied by an audible alert, acknowledging the reset. MARKERS Press the MRK button to change your setting within a category

* Full word: Highway or Auto or City Letter: H or A or C Letter, with scanning dot Vehicle voltage Vehicle speed

* Displays current speed during alert SpeedAlert feature off

* Automatically locks out false alarms AutoLearn is off

* Standard signal strength meter ExpertMeter mode SpecDisplay mode

* Automatically reduces audio during alert AutoMute feature is off

* Audio alerts increase automatically Audio alerts are controlled manually

* Turns detector off after 4 hours AutoPower feature is off

* Speed/distance in English units Speed/distance in Metric units

* Voice announcements on Voice announcements off

* Default settings Bands have been modified Turn bands on/off by pressing the Mute button ON or OFF (default is on) ON or OFF (default is off) ON or OFF (default is on) ON or OFF (default is on) ON or OFF (default is off) ON or OFF (default is off) ON or OFF (default is on) ON or OFF (default is off) Pilot HWY Pilot H Pilot H.>

Pilot V Pilot SPD sAlrt ON sAlrt OFF aLrn ON aLrn OFF Meter STD Meter EXP Meter SPC aMute ON aMute OFF aVol ON aVol OFF aPwr ON aPwr OFF Units ENG Units MET Voice ON Voice OFF Bands DFT Bands MOD X Ku K Ka POP SWS LSR TSR Marks DFT Marks MOD rCam ON or OFF (default is on) sCam ON or OFF (default is on) sTrap ON or OFF (default is on) Othr ON or OFF (default is on) 14 15 Details of Preferences Pilot Light (Power-on indication) Pilot HWY (Full word) In this setting, PASSPORT will display Highway, Auto, or Auto NoX as its power-on indication. (factory default) Pilot H (Letter) In this setting, PASSPORT will display H for Highway, A for Auto and ANX for Auto No X. Pilot H.> (Letter with scanning dot) In this setting, PASSPORT will display H for Highway, A for Auto and ANX for Auto No X plus a single dot that will continuously scroll across the display. NOTE: If the vehicles voltage Pilot V (Vehicle voltage) In this setting, PASSPORT will continually display H for Highway, A for Auto and ANX for Auto No X plus the vehicles battery voltage. drops below 10.5 volts, a low voltage warning is displayed, followed by an audible alert. A high voltage warning is also given if the voltage goes above 16.5 volts. The high-voltage warning is also followed by an audible alert. Pilot SPD (Vehicle speed) In this setting, PASSPORT will continually display H for Highway, A for Auto and ANX for Auto No X plus the vehicle speed. SpeedAlert sAlrt ON (SpeedAlert on) In this setting, your vehicles speed will be displayed for a few seconds during an alert. After a few seconds, PASSPORT will display the meter type you have selected, e.g. bar-graph, ExpertMeter or SpecMeter.

(factory default) sAlrt OFF (SpeedAlert off) With speed alert off, PASSPORT will display the meter type you have selected. AutoLearn aLrn ON (AutoLearn on) In this setting, PASSPORT will automatically learn and lock out false alarms. (factory default) aLrn Off (AutoLearn off) In this setting, false alarms can be locked out manually by pressing the Mute button three times during the false alarm. Signal Strength Meter Meter STD (Standard meter) In this setting, the meter displays the band of the received signal, and a bar graph shows the relative signal strength. (factory default) Meter EXP (ExpertMeter) In this setting, the meter simultaneously tracks multiple radar signals. It can display up to 2 Ka-band, 2 K-band, and 4 X-band signals at the same time. NOTE: The ExpertMeter feature is explained in more detail on pages 12-13. X-band signal. NOTE: Ku band is displayed as an Meter SPC (SpecDisplay meter) In this setting, the meter displays the actual numeric frequency of the radar signal received. explained in more detail on page 13. NOTE: The SpecDisplay feature is AutoMute aMute ON (AutoMute on) In this setting, PASSPORTs audio alerts will initially be at the volume you set, but after a few seconds PASSPORT will automatically reduce the volume level to keep you informed, but not annoyed.

(factory default) aMute OFF (AutoMute off) With AutoMute off, PASSPORTs audio alerts will remain at the volume you set for the duration of the radar encounter. AutoVolume aVol ON (AutoVolume on) In this setting, PASSPORTS built-in microphone listens to the ambient noise in the vehicle and increases the audio in noisy conditions (e.g. loud music, excessive wind noise, etc.). (factory default) aVol OFF (AutoVolume off) In this setting, the volume level will not increase automatically. AutoPower aPwr ON (AutoPower on) In this setting, PASSPORT will automatically shut off if the vehicle has not moved within four (4) hours. This reduces the current drain on the vehicles battery when the vehicle is parked for a long period of time. (factory default) aPwr OFF (AutoPower off) In this setting, PASSPORT should be unplugged or turned off manually when not in use. 16 17 Details of Preferences Units Units ENG (Speed measured in miles per hour) In this setting, all speed related features are displayed in miles per hour (MPH).

(factory default) Units MET (Speed measured in kilometers per hour) In this setting, all speed related features are displayed in kilometers per hour

(KPH). Voice Announcements Voice ON (Voice announcements on) In this setting, all alerts and instructions are communicated using a voice announcement. (factory default) Voice OFF (Voice announcements off) With voice off, normal tones will be used for alerts. Bands Bands DFT In this setting all radar and laser frequencies, (with the exception of POP mode) are monitored. This is the factory setting, and it is recommended that you use your PASSPORT in this mode. Bands MOD In this setting, PASSPORT will warn you with an audible alert, and associated text message stating which band has been modied (i.e. X OFF). This warning is displayed during the start up sequence. WARNING: Only modify bands if you are absolutely certain that there are no trafc radar units using that specic band in your area. Markers Marks DFT In this setting, all makers in the database will be reported as you approach them. This is the factory setting and it is recommended that you use your PASSPORT in this mode. Marks MOD In this setting, only the selected Markers will be reported. NOTE: PASSORT has plenty of built in memory to store thousands of locations. In the rare case that the database would become 80% full, a message will appear at start up to let you know youre reaching its limit. Specications Features and Specifications Operating Bands X-band 10.525 GHz 25 MHz K-band 24.150 GHz 100 MHz Ka-band 34.700 GHz 1300 MHz Ku-band 13.450 GHz 25 MHz Laser 904nm, 33 MHz bandwidth Radar Receiver / Detector Type Superheterodyne, Varactor-Tuned VCO Scanning Frequency Discriminator Digital Signal Processing (DSP) GPS Revceiver SiRFstar III Laser Detection Quantum Limited Video Receiver Multiple Laser Sensor Diodes Display Type 280 LED Alphanumeric Bar Graph, SpeedAlert, ExpertMeter, or SpecDisplay 5-Levels of Brightness Control, including Full Dark Mode Power Requirement 12VDC, Negative Ground SmartCord (included) Preferences Power-On Indication SpeedAlert AutoLearn Signal Strength Meter AutoMute AutoVolume AutoPower Units Voice Alerts Radar / Laser Bands Markers Sensitivity Control AutoSensitivity, Highway and Auto NoX Auto Calibration Circuitry SmartShield VG2 Immunity Dimensions (Inches) 1.40" H x 2.90" W x 5.35" L 18 19 Interpreting Alerts Although PASSPORT has a comprehensive warning system and this handbook is as complete as we can make it, only experience will teach you what to expect from your PASSPORT and how to interpret what it tells you. The specic type of radar being used, the type of transmission Alert The following examples will give you

(continuous or instant-on) and the location of the radar source affect the radar alerts you receive. an introduction to understanding PASSPORTs warning system for radar and laser alerts. Explanation PASSPORT begins to sound slowly, then the rate of alert increases until the alert becomes a solid tone. The Signal Meter ramps accordingly. PASSPORT emits short alerts for a few seconds and then falls silent only to briey alert and fall silent again. You are approaching a continuous radar source aimed in your direction. An instant-on radar source is being used ahead of you and out of your view. PASSPORT suddenly sounds a continuous tone for the appropriate band received. All segments in the Signal Strength Meter are lit. An instant-on radar source or laser source is being used nearby. This kind of alert requires immediate attention!

A brief laser alert. PASSPORT receives weak signals. These signals may be a little stronger as you pass large, roadside objects. The signals increase in frequency. Laser is being used in the area. Because laser is inherently difcult to detect, any laser alert may indicate a source very close by. A moving patrol car with continuous radar is overtaking you from behind. Because these signals are reected (reections are increased by large objects), they may or may not eventually melt into a solid point even when the patrol car is directly behind you. PASSPORT alerts slowly for awhile and then abruptly jumps to a strong alert. You are approaching a radar unit concealed by a hill or an obstructed curve. Alert Explanation PASSPORT alerts intermittently. Rate and strength of alerts may be consistent or vary wildly. PASSPORT alerts intermittently. Rate and strength of signal increases with each alert. PASSPORT gives an X-band alert intermittently. A patrol car is travelling in front of you with a radar source aimed forward. Because signals are sometimes reected off of large objects and sometimes not, the alerts may seem inconsistent. A patrol car is approaching from the other direction, sampling trafc with instant-on radar. Such alerts should be taken seriously. You are driving through an area populated with radar motion sensors (door openers, burglar alarms, etc.). Since these transmitters are usually contained inside buildings or aimed toward OR away from you, they are typically not as strong or lasting as a real radar encounter. CAUTION: Since the characteris-

tics of these alerts may be similar to some of the preceding examples, over-condence in an unfamiliar area can be dangerous. Likewise, if an alert in a commonly traveled area is suddenly stronger or on a different band than usual, speed radar may be set up nearby. 20 21 Radar POP Laser Red Light Cameras How Radar Works Trafc radar, which consists of microwaves, travels in straight lines and is easily reected by objects such as cars, trucks, even guardrails and overpasses. Radar works by directing its microwave beam down the road. As your vehicle travels into range, the microwave beam bounces off your car, and the radar antenna looks for the reections. Using the Doppler Principle, the radar equipment then calculates your speed by comparing the frequency of the reection of your car to the original frequency of the beam sent out. Trafc radar has limitations, the most signicant of these being that it typically can monitor only one target at a time. If there is more than one vehicle within range, it is up to the radar operator to decide which target is producing the strongest reection. Since the strength of the reection is affected by both the size of the vehicle and its proximity to the antenna, it is difcult for the radar operator to determine if the signal is from a sports car nearby or a semi-truck several hundred feet away. Radar range also depends on the power of the radar equipment itself. The strength of the radar units beam diminishes with distance. The farther the radar has to travel, the less energy it has for speed detection. Because intrusion alarms and motion sensors often operate on the same frequency as X, and K-band radar, your PASSPORT will occasionally receive non-

police radar signals. Since these X-Band transmitters are usually contained inside of a building, or aimed toward the ground, they will generally produce much weaker readings than will a true radar encounter. As you become familiar with the sources of these pseudo alarms in your daily driving, they will serve as conrmation that your PASSPORTs radar detection abilities are fully operational. How POP Works POP mode is a relatively new feature for radar gun manufacturers. It works by transmitting an extremely short burst, within the allocated band, to identify speeding vehicles in trafc. Once the target is identied, or POPPED, the gun is then turned to its normal operating mode to provide a vehicle tracking history,

(required by law). NOTE: According to the operators manual from the radar gun manufac-

turer, tickets should not be issued in POP mode. How Laser (Lidar) Works Laser speed detection is actually LIDAR

(Light Detection and Ranging). LIDAR guns project a beam of invisible infrared light. The signal is a series of very short infrared light energy pulses which move in a straight line, reecting off your car and returning to the gun. LIDAR uses these light pulses to measure the distance to a vehicle. Speed is then calculated by measuring how quickly these pulses are reected given the known speed of light. LIDAR (or laser) is a newer technology and is not as widespread as conventional radar, therefore, you may not encounter laser on a daily basis. And unlike radar detection, laser detection is not prone to false alarms. Because LIDAR transmits a much narrower beam than does radar, it is much more accurate in its ability to distinguish between targets and is also more difcult to detect. AS A RESULT, EVEN THE BRIEFEST LASER ALERT SHOULD BE TAKEN SERIOUSLY. There are limitations to LIDAR equipment. LIDAR is much more sensitive to weather conditions than RADAR, and a LIDAR guns range will be decreased by anything affecting visibility such as rain, fog, or smoke. A LIDAR gun cannot operate through glass and it must be stationary in order to get an accurate reading. Because LIDAR must have a clear line of sight and is subject to cosine error

(an inaccuracy which increases as the 22 23 angle between the gun and the vehicle increases) police typically use LIDAR equipment parallel to the road or from an overpass. LIDAR can be used day or night. An intersection may have more than How Red Light Cameras Work Red-light cameras use three basic things:

1) a camera, 2) a way to trigger the camera, and 3) a computer. one camera to monitor trafc from multiple directions. The trigger is typically a series of wires buried just beneath the surface of the road. These wires are separated by a pre-set distance in order to create a magnetic eld or induction loop. Once a vehicle is in the intersection, the loop or circuit becomes closed and alerts the computer to take a picture. the cars owner, no matter whos actually driving. In this case, the red-light camera only needs to photograph the vehicles rear license plate. In other states, the actual driver is responsible for paying the ticket. In this case, the system needs a second camera in front of the car, in order to get a shot of the drivers face. In some states, tickets are issued to Speed Cameras SWS Another technology used is an Radar and laser based cameras are How Speed Cameras Work There are several types of xed position speed cameras used, including radar, laser, induction loop and photo-based. typically mounted near the road and transmit a short range signal across the lanes monitored. Since this signal is transmitted across the road instead of down the road like many handheld systems, detecting them in time is critical. inductive loop system. This type of system utilizes wire buried just beneath the surface of the road to trigger a computer which calculates speed between the two points. pictures of all passing vehicles between two separate xed locations. Both sets of photographs are date and time stamped, which enables the system to calculate average speed between the two locations. Fixed speed cameras can also be set up to monitor one to four lanes of trafc in the same direction. To achieve this, a sensor is installed in each lane and a wide angle camera lens is used to photograph the vehicle which is speeding. Photo-based systems take two sets of NOTE: Some of the safety How SWS Works Safety Warning System, or SWS, uses a modied K-band radar signal. The SWS safety radar system has 64 possible messages (60 currently allocated). The SWS messages your PASSPORT can display are listed on the facing page. From the factory, your PASSPORT is programmed with SWS decoding OFF. If you wish to detect this system, use the Preferences feature to turn PASSPORTs SWS decoding ON. If SWS is used in your area, your PASSPORT will display the safety messages associated with the signal. messages have been condensed, so that each message can be displayed on one or two screens on PASSPORTs eight-character display. relatively new, and the number of transmitters in operation is not yet widespread, you will not receive Safety signals on a daily basis. Do not be surprised if you encounter emergency vehicles, road hazards and railroad crossings that are unequipped with these transmitters. As Safety transmitters become more prevalent (the number of operating transmitters is growing every day), these Safety radar signals will become more common. Since Safety radar technology is Highway Hazard Zone Advisory Highway Construction or Maintenance SWS Text Messages 1 Work Zone Ahead 2 Road Closed Ahead/Follow Detour 3 Bridge Closed Ahead/Follow Detour 4 Highway Work Crews Ahead 5 Utility Work Crews Ahead 6 All Traffic Follow Detour Ahead 7 All Trucks Follow Detour Ahead 8 All Traffic Exit Ahead 9 Right Lane Closed Ahead 10 Center Lane Closed Ahead 11 Left Lane Closed Ahead 12 For future use 13 Stationary Police Vehicle Ahead 14 Train Approaching/At Crossing 15 Low Overpass Ahead 16 Drawbridge Up 17 Observe Drawbridge Weight Limit 18 Rock Slide Area Ahead 19 School Zone Ahead 20 Road Narrows Ahead 21 Sharp Curve Ahead 22 Pedestrian Crossing Ahead 23 Deer/Moose Crossing 24 Blind/Deaf Child Area 25 Steep Grade Ahead/Truck Use Low Gear 26 Accident Ahead 27 Poor Road Surface Ahead 28 School Bus Loading/Unloading 29 No Passing Zone 30 Dangerous Intersection Ahead 31 Stationary Emergency Vehicle Ahead 32 For future use 24 25 Weather Related Hazards Travel Information/Convenience 33 High Wind Ahead 34 Severe Weather Ahead 35 Heavy Fog Ahead 36 High Water/Flooding Ahead 37 Ice On Bridge Ahead 38 Ice On Road Ahead 39 Blowing Dust Ahead 40 Blowing Sand Ahead 41 Blinding Snow Whiteout Ahead 42 For future use 43 Rest Area Ahead 44 Rest Area With Service Ahead 45 24 Hour Fuel Service Ahead 46 Inspection Station Open 47 Inspection Station Closed 48 Reduced Speed Area Ahead 49 Speed Limit Enforced 50 Hazardous Materials Exit Ahead 51 Congestion Ahead/Expect Delay 52 Expect 10 Minute Delay 53 Expect 20 Minute Delay 54 Expect 30 Minute Delay 55 Expect 1 Hour Delay 56 Traffic Alert/Tune AM Radio 57 Pay Toll Ahead 58 Trucks Exit Right 59 Trucks Exit Left 60 For future use 61 Emergency Vehicle In Transit 62 Police In Pursuit 63 Oversize Vehicle In Transit 64 Slow Moving Vehicle Fast/Slow Moving Vehicles TSR GPS / Updates Service TSR Signal Ranking Software Your radar detector includes a new optional boost in anti-falsing software to eliminate excessive alerts from erroneous X and K-band sources. One example of this is trafc ow monitoring systems. These systems, which are becoming more widely used in several countries, generate K-band signals to measure the ow of trafc on a given road. Unfortunately most detectors see this as a real threat and will alert you to it unnecessarily. Our new proprietary software (TSR), intelligently sorts, ranks and rejects this type of false alarm automatically. The result is ultimate protection without excessive false alarms. option and can be activated through the Programming section. We suggest you turn TSR on if you are experiencing extreme false alerts in your area. If not, your detector is ready to start protecting you right out of the box. If you have any questions about this new feature, please give us a call or visit our website for more details The TSR software is set up as an How GPS Works The Global Positioning System (GPS) is made up of twenty four orbiting satellites and was developed by the U.S. military. There are at least four satellites visible at any given time every day. and receive data from four of these satellites. This data includes the distance to your location from each of the satellites. Once the distance from each satellite is known, the receiver can calculate and pinpoint your exact location. A GPS receiver is designed to locate In order to have access to these Software Updates PASSPORTs red light and speed camera database is easily updated using our exclusive detector software tools found on our web site. Firmware, or the operating software for the detector, can also be updated using these tools. updates, you must register your PASSPORT at www.EscortRadar.com. Once registered, you will receive email notications that updates are now available for your database or rmware. powered up to use the software tools. If you have a laptop computer, you can take it out to the vehicle to download the updates. If not, you will need to purchase a 12-volt adapter. These can be found at your local electronics retailer or our website under accessories. The PASSPORT ix will need to be Service Procedure If Your PASSPORT ever needs service, please follow these simple steps:

1 Check the troubleshooting section of this manual. It may have a solution to your problem. 2 Call us at 1-800-543-1608. We may be able to solve your problem over the phone. If the problem requires that you send your PASSPORT to the factory for repair, we will provide you with a Return Authorization Number, which must be included on the outside of your shipping box. Enclose the following information with your PASSPORT:

Your Service Order Number Your name and return address Your daytime telephone number A description of the problem you are experiencing Please include the lighter cord you have been using with your unit If you have owned your PASSPORT 9500ix less than one year and did not purchase directly from ESCORT, please include a copy of your receipt from an Authorized Reseller Out Of Warranty Repairs For out of warranty repairs, include prepayment in the amount you were quoted by the ESCORT Customer Service Representative. If the detector has been damaged, abused or modied, the repair cost will be calculated on a parts and labor basis. If it exceeds the basic repair charge, you will be contacted with a quotation. If the additional payment is not received within 30 days (or if you notify us that you choose not to have your PASSPORT repaired at the price quoted), your PASSPORT will be returned, without repair. Payment can be made by check, money order, or credit card. Mail PASSPORT and SmartCord To:

ESCORT Customer Service Department Return Authorization Number _________ 5440 West Chester Road West Chester, Ohio 45069 For your own protection, we recommend that you ship your PASSPORT postpaid and insured. Insist on a proof of delivery, and keep the receipt until the return of your PASSPORT. 26 27 Troubleshooting Problem Solution Problem Solution PASSPORT beeps briey at the same location every day, but no radar source is in sight. An X-band motion sensor or intrusion alarm is located within range of your route. Use the TrueLock feature to lter this signal out. PASSPORT will not turn on. Check that vehicle ignition is ON. Check that vehicle lighter socket is functional. Try PASSPORT in another vehicle. PASSPORT does not seem sensitive to radar or laser. Make sure that windshield wipers do not block PASSPORTs radar antenna and that the laser lens is not behind tinted areas. Determine if your vehicle has an Instaclear, ElectriClear or solar reective windshield which may deect radar or laser signals. PASSPORT may be in City Mode. GPS indicator will not stop ashing. PASSPORT does not have a clear view of the sky. Reposition it or try it in another vehicle. TrueLock lock lter does not seem to be working. Check to make sure the GPS button is on. At rst detect, numbers come up on the display. SpeedAlert feature is on. You can turn it off in Preferences. PASSPORT did not alert when a police car was in view. VASCAR (Visual Average Speed Computer and Recorder), a stopwatch method of speed detection, may be in use. Ofcer may not have radar or laser unit turned on. Explanation of Displays PASSPORTs display is not working. Press the BRT button to deactivate Dark Mode. PASSPORTs audible alerts are less loud after the rst few alerts. PASSPORT bounces or sags on windshield. PASSPORT is in AutoMute Mode. See page 9 for details. PASSPORT is not making contact with the windshield to provide stability. While holding down PASSPORTs EasyMount button, slide PASSPORT further back toward the windshield so that the back top edge makes rm contact. PASSPORTs power-on sequence reoccurs while you are driving. A loose power connection or dirty lighter socket can cause PASSORT to be briey disconnected. Your 14-year old son has changed all 9 of the Preferences options. You can return all of the user Preferences to the factory defaults settings by holding down the SEN and BRT buttons while you turn PASSPORT on. PASSPORT feels very warm. It is normal for PASSPORT to feel warm. No display PASSPORT is in Dark mode. Press the BRT button to change the brightness.

(page 10) PilotHWY One of the many Preferences. (pages 14-18) X|, or K|, or KA| etc. PASSPORT has been set to ExpertMeter Mode in Preferences. (page 12-13) Reset Power PASSPORT needs to cycle power. Unplug it from power socket and restart. 28 29 Accessories Accessories The following accessories and replacement parts are available for PASSPORT 9500ix. ESCORT Extended Service Plan ESCORT offers an optional extended service plan. Contact ESCORT Sales for details at 800-433-3487. Register online:

@www EscortRadar.com Coiled SmartCord ............................ $29.95 Straight SmartCord ......................... $29.95 Available in red or blue Direct-wire SmartCord .................. $29.95 Available in red or blue Accessory Kit ..................................... $14.95 Zippered Travel Case ..................... $14.95 FCC NOTE: Modications not expressly approved by the manufacturer could void the users FCC granted authority to operate the equipment. 30 31 s n o i t a r o f r e p g n o a d r a c e v o m e R l _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ e m a N t s a L _ _ _ _ l a i t i n I e l d d M i _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

:

e m a N t s r i F

. 1 _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ s s e r d d A __ _ _ _ _ _ _ _ p i Z _ _ _ _ _ _ _ _ _ _ _ _ _ e t a t S _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ y t i C _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _

) n o i t s e u q a e v a h e w e s a c n I

(

l i a m

-

E _ _ _ _ _ _ _ _ _ r e b m u N l a i r e S _ _ _ _ _ _ _ _ _ _ _ l e d o M _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ d e s a h c r u P t c u d o r P _ _ _ _ _ _ _ e c i r P _ _ _ _ _ _ _ _ _ _ _ e t a D _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ e s a h c r u P f o e c a l P _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ t c u d o r p T R O C S E s i h t g n i s a h c r u p r o f n o s a e r y r a m i r P __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ __ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ o N s e Y o N s e Y

?

t s i l g n i l i a m r u o o t d e d d a e b o t e k i l u o y d u o W l

?

s e t a d p u h t i w u o y l i a m

-

e o t s u e k i l u o y d u o W l

. 2

. 3

. 4

. 5

. 6 r o

, s u o t n r u t e r d n a n o i t c e s s i h t t u o l l i f e s a e l p

, T R O C S E m o r f y l t c e r i d r o t c e t e d r u o y e s a h c r u p t o n d d u o y i f I m o c

. r a d a R t r o c s E

. w w w

:

s s e r d d a b e w r u o t a e n i l n o r e t s i g e r

. t u o s i h t l l i f o t d e e n t o n o d u o y

, T R O C S E m o r f y l t c e r i d r o t c e t e d r u o y d e s a h c r u p u o y f I D R A C N O I T A R T S I G E R T C U D O R P T R O C S E l R e m o v e c a r d a o n g p e r f o r a t i o n s Warranty ESCORT One Year Limited Warranty What this warranty covers: ESCORT warrants your Product against all defects in materials and workmanship. For how long: One (1) year from the date of the original purchase. What we will do: ESCORT, at our discre-

tion, will either repair or replace your Product free of charge. What we will not do: ESCORT will not pay shipping charges that you incur for sending your product to us. What you must do to maintain this warranty: Show original proof of pur-

chase from an authorized ESCORT dealer. Warranty Exclusions: Warranty does not apply to your product under any of the following conditions: 1. The serial number has been removed or modied. 2. Your product has been subjected to misuse or damage (including water damage, physical abuse, and/or improper installation). 3. Your product has been modied in any way. 4. Your receipt or proof-of-purchase is from a non-authorized dealer or internet auction site including E-bay, U-bid, or other non-authorized resellers. 5. You are not the original purchaser of the radar detector from an authorized dealer or did not receive it as a gift from the original purchaser of the radar detector from an authorized dealer. To obtain service: 1. Contact ESCORT

(1-800-543-1608) to obtain a Return Authorization Number. 2. Properly pack 33 your product and include: your name, complete return address, written descrip-

tion of the problem with your product, daytime telephone number, and a copy of the original purchase receipt. 3. Label the outside of the package clearly with your Return Authorization number. Ship the product pre-paid (insured, for your protec-

tion) to: ESCORT Inc, 5440 West Chester Rd., West Chester, OH 45069. LIMITATION OF WARRANTY: EXCEPT AS EXPRESSLY PROVIDED HEREIN, YOU ARE ACQUIRING THE PRODUCT AS IS AND WHERE IS, WITHOUT REPRESENTATION OR WARRANTY. ESCORT SPECIFICALLY DISCLAIMS ANY REPRESENTATION OR WARRANTY INCLUDING, BUT NOT LIMITED TO THOSE CONCERNING THE MERCHANT-

ABILITY AND SUITABILITY OF THE PRODUCT FOR A PARTICULAR PURPOSE. ESCORT SHALL NOT BE LIABLE FOR CONSEQUENTIAL, SPECIAL OR INCIDENTAL DAMAGES INCLUDING, WITHOUT LIMITATION, DAMAGES ARISING OUT OF THE USE, MISUSE OR MOUNTING OF THE PRODUCT. The above limitations or exclusions shall be limited to the extent they violate the laws of any particular state. ESCORT is not responsible for products lost in shipment between the owner and our service center. Other legal rights: This Warranty gives you specic rights. You may have other legal rights, which vary, from state to state. 32

Passport u9500ix International"

_....... This card is a supplement to your Owner's Manual. All features below are selectable On or Off. The operating frequencies are:

X band: 10.475-10.575 GHz Default OFF Default ON K band: 23.950-24.250 GHz K1 band: 23.950-24.109 GHz Default OFF K2 band: 24.110-24.174 GHz Default OFF K3 band: 24.175-24.250 GHz Default OFF K Pulsed band: 24.050-24.250 GHz Default ON Ka : 33.400-36.000 GHz Default OFF Ka1: 33.900-34.200 GHz.................. Default ON Ka2: 34.200-34.400 GHz Default ON Ka3: 34600-34.800 GHz Default ON Ka4: 35.40035600 GHz . Default ON Ka POP: 33.725-33.875 GHz (60 ms) Default OFF Radar detector rejection: 11.133GHz-12.000GHz Default OFF Laser 5KHZ included.. . SWS (Safety Warning System) Default ON Default OFF

"

Preferences default option changed:

Autolearn Default OFF Added Marker option:

aCam (Average Speed Camera) ...... ..... .... ...... Default ON

(.'\verage Speed camera = 500' when traveling below SSmph, or 1000' above 55mph.

"Escort Defender database for Europe and Australia included. ESCORT