WIRELESS GEAR TRUE WIRELESS MINI EARBUDS WITH USB CHARGING BASE USER MANUAL Introduction Thank you for purchasing the WIRELESS GEAR Wireless Earbuds. For best use of this device, we recommend carefully reading this user manual and keep it for your records Package Contents a. Two Earbuds b.Charging stand c. Ear gels d.User's manual
NN 7 A, WARNIN CHOKING HAZARD - Small parts. Not for children under 3 years. Specifications 1. Multi Function Button 2. LED Indicator 3. Charging Port 4.Charging Port 5. LED Indicator Pairing Earbuds 1. Long press the multifunction button on both of the earbuds until the indicator lights flash red & blue 2. Two earbuds will paired automatically.If the pairing is successful, The Master of earbud will blink blue and red, the slave earbud will flash blue every 4 seconds. 3. Activate the Bluetooth feature on your device, and set the device to discovery mode to search for wireless devices.
(See the User Manual for your device)
* If you've previously paired a single earbud, the paired set should be paired as a new device with the name below. 4. Tap the Earbuds on your device displayed as WG-BT-EB.
(if pass code is requested enter 0000)
* Once the Earbuds have been paired, they will automatically pair with each other and your device, when they are powered on and Bluetooth is activated on your device. Function Operating Instructions Power on: Long Press the power button for 3 seconds to turn on;
Power off: Long Press the power button for 3 seconds to turn off;
Boot back: When the pairing is successful, the second boot Bluetooth headset priority back into the state automatically connected to the connected phone;
Play /Pause: In the standby mode, click the power button to play the music directly, and press the power button to pause the playback;
Song switch: Play music press the plus or minus key to switch songs up and down; Volume addition and subtraction: long-press the plus or minus key to increase or decrease the volume;
Call answer: When the phone calls, click the power button to answer the call;
Call hang up: When the phone calls, click the power button to hang up the phone;
Call refused: Phone calls, long press power button for 2 seconds can refuse to call;
Last number redial: While on standby or playing music, double-click the power button to dial the last call in your call log;
Low battery prompt: When the Bluetooth headset battery power is low, it will issue a low battery tone;
Work indicator: Red lights up when charging, and when fully charged, the red light goes out; blue light flashes slowly when playing music. Device Safety e Your True Wireless Earbuds have internal rechargeable batteries. Improper usage may result in the Earbuds becoming hot, ignite or burst and cause injury if exposed to conditions of abuse. Do not disassemble, throw away or damage the True Wireless Earbuds. Store the True Wireless Earbuds in a dry place, keeping them away from damp corrosive materials and environments such as salt air. Keep the True Wireless Earbuds away from direct sunlight, fire and high voltage equipment. Do not store the True Wireless Earbuds inside a car during hot weather. Remember a closed car acts as a green house allowing the inside to reach high temperatures. The True Wireless Earbuds are not a toy. Please keep them out of the reach of young children. Please do not discard the True Wireless Earbuds. Consult your local waste collection agency for proper disposal or recycling methods. You may also contact "Call2Recycle"
at 877-273-2925 or online at call2recycle.org" for a battery recycling drop off location near you. Charging Earbuds Place the earbuds on Charging case, the earbuds indicator will turn red when charging and turn blue once charging is complete. Initial charging time is approximately 2 hours. Fully power charger case could recharge the earbuds about 2-3 times. Features CVC digital noise reduction listening to clear sound BT5.0 Bluetooth chip smart wireless embodiment USB plug-in design makes charging safer and more convenient Battery Information Your earbuds are powered by a rechargeable batteries. The full performance of new batteries is achieved only after two to three complete charge and discharge cycles. The batteries can be charged and discharged hundreds of times, but it will eventually wear out. Do not leave a fully charged earbuds connected to a charger, overcharging may shorten their lifetime. If left unused, fully charged earbud batteries will lose their charge over time. e Never use any charger that is damaged. e Leaving the device in hot or cold places will reduce the capacity and lifetime of the batteries. Optimal temperature for the batteries is between 59F and 77F. A device with a hot or cold batteries may not work temporarily, even when the batteries are fully charged. Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged. Always dispose of batteries according to local regulations. Please recycle. Do not dispose as household waste. Technical Support techsupport@esicellular.com or call (212) 883-8838 ESI Cases and Accessories 44 East 32nd Street, 6th floor, New York, New York 10016 Wireless Gear is a registered trademark of ESI Cases & Accessories. All other trademarks are property of their respective companies. It may damage your hearing if you listen with high volume for a long time. It is recommended you use the lowest volume possible for speaking and listening to music. VENDOR: PLEASE ADD FCC ID EARBUDS PAIR AS WG-BT-EB FCC Information FCC ID: 2AQBE91909 This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. Federal Communications Commission (FCC) Statement This Equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
e Reorient or relocate the receiving antenna. e Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. e Consult the dealer or an experienced radio/TV/
technician for help. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user authority to operate the equipment. Tested to comply with FCC standard. FOR HOME OR OFFICE USE. Warning:
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or conjunction with any other antenna or transmitter. Limited Warranty ESI Cases and Accessories warrants to the first consumer purchaser that this product, when shipped in its original container to he original purchaser, will be free from defective workmanship and materials for one year and agrees that it will, at its option, either repair the defect or replace the defective product or part thereof at no charge to the purchaser for parts or la described. This warranty does not apply to any appearance items of the product nor to the additional excluded item(s) set forth below nor to any product the exterior of which has been damaged or defaced which has been SubIECIEd to misuse, abnormal service or handlin or which has been altered or modified in design or construction. limited warranty described herein is in addition to an applicable law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD FROM THE DATE OF ORIGINAL PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty last, so the above limitation may not apply to you. Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein or to extend the duration of any warranties beyond the time period described herein on the behalf of ESI Cases and Accessories. The warranties described herein shall be the sole and exclusive warranties granted by ES! Cases and Accessories and shall be the sole and exclusive remedy available to the purchaser corrections of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibili-
ties of ESI Cases and Accessories to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract negligence, strict liability or otherwise. In no event shall ESI Cases and Accessories be liable or in any way responsible, for any incidental of consequential economic or property damage. Some states do not allow the exclusion of Incidental or consequential damages, so the above exclusion may not apply to you. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE. This warranty does not cover cables that have become frayed, cracked, or broken from use. The user should immediately replace this, or any, charge cable that has become frayed, cracked, or broken, as it may constitute a serious safety risk, including electrocution, if it is continued to be used. Send device with the product to:
ESI Cases and Accessories 44 East 32nd Street, 6th floor, New York, New York 10016
*Enclose proof of purchase and $11.95 for Shipping and Handling. or for the time periods