FCC ID: YXG-ES700PIR Passive Infrared Detector

part of the Essence Group Motion Detector ES700PIR State-of-the-art passive infrared detection 4th-generation DragonflyEye multi-zone spherical lens with "pet-immunity"

Daylight and insect immunity with sealed optics Tamper-proof wall mount Wireless and battery-operated for easy, maintenance-free installation More than 3 years of usage on a single CR123A Lithium battery The ES700PIR Motion Detector seamlessly integrates with the EverGuard and EverGuard Express control panels and other products from Essence Security With millions of systems and security peripherals installed internationally, Essence Security is a technological and market leader in the field of advanced security solutions for homes, offices and full-service central monitoring stations 106mm SIZE & WEIGHT ES700PIR Motion Detector DESCRIPTION 60mm The ES700PIR is a bi-directional wireless digital PIR detector. Utilizing proprietary 4th-generation DragonflyEye technology, the ES700PIR provides exceptional detection coverage, range and angle. Additionally, the ES700PIR has sealed optics and is immune to light and insects, further reducing false alarms. Advanced detection algorithms for false alarm suppression WIRELESS Bi-directional: End-to-End Bi-Directional ESI protocol Advanced radio supervision algorithm Up to 700 meters RF range (open air) Modulation and Frequency: BFSK , 868.3 MHz (Europe) or 916.5 MHz (US) Encoding: 32-bit ID, over 4 billion combinations This device complies with FCC Rules Part 15 and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) This device must accept any interference received, including interference that may cause undesired operation Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes:

(1) l'appareil ne doit pas produire de brouillage, et

(2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. SECURITY Tamper Mechanism Unique electronic serial number POWER CONSUMPTION Long operational period (over three years) without external power source Uses a single CR123A Lithium battery 106 mm (l) x 60 mm (w) x 51 mm (h) 67 grams + 19 grams wall-bracket + 17 grams battery

(CR123A) Operating Ambient Temperature range: -5 - 55 Celsius Humidity: Up to 95% non condensing ENVIRONMENTAL CERTIFICATIONS AND APPROVALS CE: CE mark, EMC/EMI according to ETSI EN 301 489-4, ETSI EN 301 489-1, EN 50130-4:1996, EU Directive 1999/5/EC for R&TTE Radio: ETSI EN 300 220-3, ETSI EN 300 220-1, CEPT/ERC Recommendation 70-03, EN 50131-5-3:2005 + A1:2008 Safety: EN/IEC60950-1, TUV: UL60950-1, NOM Security & Alarm systems: EN 50131-1:2006 + A1:2009 Class-II Grade-2, EN 50131-2-2:2008 Class-II Grade-2, EN 50131-6:2008 Type-C Environmental Regulation: RoHS 2002/95/EC Reliability (Mechanical & Environmental conditions):

EN 50130-5:1999 and IEC 60068 Manufacturing and Materials Standards: ISO 9001:2008, ISO 14000 ADDITIONAL INFORMATION Detection Type: Passive Infrared Insect Immunity: Sealed Optics Pet Immune (option) Installation:

Standard PIR wall mount using double-sided tape Certifications and approvals:

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance (Essence Ltd.) could void the users authority to operate the equipment. Essence Security International (E.S.I.) Ltd. www.essence-grp.com +972-73-244-7777 info@essence-grp.com 2013 Essence Security International (E.S.I.) Ltd. Information contained within this document may change without notice.

Essence Security International Ltd. Label The label is affixed on the rear side of PIR detector as shown below. The label material is PVC with a permanent adhesive. FCC ID:YXG-ES700PIR IC:11061A-ES700PIR Label location FCC ID:YXG-ES700PIR IC:11061A-ES700PIR Page 1 of 1 Label with FCC ID:YXG-ES700PIR and IC:11061A-ES700PIR is located at the rear side panel. The statement according to FCC part 15 15.19(a)(3) is placed in Users Guide (Application exhibit User_manual_24393, page 2).

FCC, Request for non-disclosure RF_501, Issue 6 Date: 16-Jul-10 Page 1 of 1 Company Name: Essence Security International Ltd. Address:

City:

Country:

12 Abba Eban avenue, Ackerstein Tower Bldg. D, Herzliya 4612001 Israel Edisonstraat 12A 6902 PK ZEVENAAR The Netherlands To: Telefication B.V., Dept. FCC TCB Subject: Request for confidentiality FCC ID: YXG-ES700PIR Reference number: ######

Dear FCC TCB, 1. Long-Term Confidentiality Pursuant to 47 CFR Section 0.459(a) & (b), we hereby requests non-disclosure and confidential treatment of the following materials submitted in support of FCC certification application:

Bill(s) of Material Block Diagrams Operational Description Schematic Diagrams Tune-up Procedure Above materials contain secrets, proprietary and technical information, which would customarily be guarded from competitors under 47 CFR, section 0.457(d)(2). Disclosure or publication or any portion of this company confidential material to other parties could cause substantial competitive harm and provide unjustified benefits for competitors. 2. Short-Term Confidentiality (STC) Pursuant to Public Notice DA 04-1705 of the Commissions policy, in order to comply with the marketing regulations in 47 CFR 2.803 and the importation rules in 47 CFR 2.1204, applicant hereby requests Short-Term Confidential treatment of the following materials (note 1):

Internal Photos Users Manual Test Set-up Photos External Photos Justification:

Planned Release Date STC: (notes 2, 3, 4, 5) Date: June 25, 2013 Name and signature of applicant: Amir Boim Notes:

1) A document or type of document can only have ONE type of confidentiality!

2) Short-Term confidentiality is in principle for 45 days from date of grant; it can be extended max 3 times (total time 180 days max.)!

3) FCC must be informed when marketing begins earlier. 4) Release takes place automatically thus extension must be requested in time. Telefication does not remind you of this!

5) Request for extension or for release must be received by Telefication at least 7 days before date of actual marketing or before expiration of the STC period