11 VeriSure Fast-II ES6500VSF Control Panel Product Specifications GSM/GPRS professional monitoring) Customer-oriented, Plug-&-Play security system with powerful capabilities. It features:
Optional standalone operation via mobile phone (without Multiple communication channels for video, voice and data : SMS, Audio and video verification to reduce false alarms Automatic remote boot server and parameter programming for all Easy & Rapid Wireless Installation for Laymen Installers or DIY kits Simple & Intuitive User Interface with Integrated Keypad Backup battery for up to 36-hours of independent operation Vast configuration capabilities Comfort video and voice applications Family safety for children & elderly system peripherals Lifestyle Plug-&-Play state-of-the-art Wireless security system:
User-friendly Utilizes cutting-edge technology Bidirectional RF wireless communication Battery operated Easy to install Nonintrusive, state-of-the-art design This equipment has been tested and found to comply with the limits for a Class B digital NOTE:
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications to this equipment not expressly approved by the party responsible for compliance (Essence Security International Ltd.) could void the users authority to operate the equipment. WARNING! To comply with FCC RF exposure compliance requirements, the device should be located at a distance of at least 20 cm from all persons during normal operation. The antennas used for this product must not be co-located or operated in conjunction with any other antenna or transmitter. Certifications and approvals:
COMMUNICATION:
Cellular Network:
GSM/GPRS/EDGE Module Quad band (850/900/1800/1900 MHz) Bi-directional: End-to-End Bi-Directional ESI protocol Advanced radio supervision algorithm Up to 700 meters (2296 Ft.) RF range (open air) Modulation and Frequency: BFSK , 868.3 MHz for Europe or 916.5 MHz for USA Encoding: 32-bit ID, over 4 billion combinations SECURITY & SAFETY:
4 Scenarios (Full, Part-Arm, Night and Perimeter) 32 Users Silent SOS and silent Duress Alarm Automatic Scheduler Internal Siren, up to 95 dB (configurable) at 1m distance Tamper detector (Wall) Extended Event Log with Time/Date Stamp Separate Safety Alarm, up to 100 dBA at 1m (configurable) POWER:
Advanced switching power supply Input: 100~240V, 50/60Hz external AC adaptor Li-Polymer rechargeable backup battery for up to 36 hours SIZE and WEIGHT:
Dimensions: 120x120x57 mm / 4.7x4.7x 2.24 In. (LxWxD) Weight: 414 gr. / 0.9 lb. (incl. battery) ENVIRONMENT:
Operating Temperatures: -10C ~ 55C / 14F ~ 131F CERTIFICATION:
CE: CE mark, EMC/EMI according to ETSI EN 301 489-4, ETSI EN 301 489-1, EN 50130-4:1996, EU Directive 1999/5/EC for R&TTE Radio: ETSI EN 300 220-3, ETSI EN 300 220-1, CEPT/ERC Recommendation 70-
03, EN 50131-5-3:2005 + A1:2008 Safety: EN/IEC60950-1 Security & Alarm systems: EN 50131-1:2006 + A1:2009 Class-II Grade-2, EN 50131-3:2009 Class-II Grade-2, EN50131-6:2008 Type-A Reliability (Mechanical & Environmental conditions):
EN 50130-5:1999 and IEC 60068 This device complies with FCC Rules Part 15. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation For more information, go to: www.essence-grp.com 2013 Essence Security International (E.S.I.) Ltd. Information contained within this document may change without notice