User's instruction for 3D GlassesESG806 pesees pesees posees posees posees s333s3 poseseses Dear customers, due to many functions provided for you, to fully yield functions, please read the instruction manual before use. Function introduction The active shutter 3D glasses is provided with Bluetooth wireless technology transmission system. After the 3D glasses receives the synchronization signal, switch the lens switch and shape 3D effects with 3D TV set to form 3D images. The Company's products have the following functions:
View 3D image View 3D TV Adopt Bluetooth wireless technology, not interfering with the use of the remote control and avoid interference of the remote control. Synchronized signal numerical coding technology, strongly against interference High light transmission The lens is double-sided hardening treatment Table of contents Packing list Technical specifications Positions and locations of the glasses control Pairing functions of 3D glasses Key operation and instructions of 3D glasses Introduction to functions Troubleshooting Attentions Health tip Packing list 1. Shutter 3D glasses 1 PCS 2. Glasses cloth 41 PCS 3. Instruction manual 1 PCS Please read the instruction manual before use!
Troubleshooting Solutions if you cannot see 3D effects after the shutter glasses turns on?
1.Please ensure that the straight line distance between the TV set and the 3D glasses is less than 6 meters. 2.Please check setting of 3D function, and check the TV set is 3D mode or not. 3.Check pairing code is completed or not. 4.lf battery has been exhausted, please replace the button battery. 5.Strip off the surface protection film for 3D glasses for the first use. 6.It is abnormal to view the unpaired TV set with the paired glasses. One only glasses can be used to view the paired TV set simultaneously. Solutions for shaking or twinkling for 3D i 1.Insufficient electricity capacity, please replace the button battery. 2.Light interference in viewing environment, like bright magnetic fluorescent lamp (50 or 60Hz), please tum off in case of incurrence. Technical specifications Model: ESG806 Contrast: 1000:1 LCD refreshing frequency: 120Hz Absolute light emission: 67%
Rated working current: 0.6mA Continuous working time: >200Hr Total weight: 20g Synchronization: Bluetooth Operating temperature: 5C-35 C Storage temperature: -20 C-60 C Working temperature: 20%-80%RH Location and name of glasses key Indicator light and switch key/ Mode key Mirror leg Shell enclosure LCD screen The switch key and indicator light/enclosure/LCD screen Notes: to improve product performances, the specifications may be changed and further notice will not be given. Attentions:
1.The shutter glasses is only used for viewing 3D contents and cannot be used for other purposes. It may impair vision if it is used as ordinary glasses and sunglasses. 2.The shutter glasses is powered by button battery which cannot be damaged under any circumstances; otherwise it may cause injury or fire. 3.Do not set the shutter 3D glasses near the direct sunshine or fire, heating source and water, otherwise, it may cause failure of the products. 4.The shutter 3D glasses is cleaned with hairless soft cloth which is free of any dust and foreign substances. Spraying or wiping the shutter 3D glasses with other chemical agents may result in fault of the 3D glasses or impair the glasses appearance. 5.Do not exert force to the shutter glasses to avoid falling or bending; otherwise, it may be damaged and cannot work 6.While viewing 3D video, do not place any fragile around. Some 3D video may threaten and move the viewer to break objects around and suffer from injury. 7.To ensure receiving effects of the shutter 3D glasses, it is recommended to view within the correct receiving range. Do not place any objects before the transmitter to avoid signal obstacles. 8.Magnetic fluorescent lamp of 50Hz or 60Hz may affect operation of the 3D glasses to result shaking of the 3D image. Please tum off fluorescent lamp and view in case of incurrence. 9.In case of cable exposure or lens damage of the shutter 3D Pairing function of 3D glasses 1.Tum on TV set, set the TV into 3D mode, and move the glasses into the position within 50cm from the TV set. 2.Press the switch key (over 3s) and release your hands. The ted lamp twinkles rapidly (frequency 2HZ). Code pairing is in progress, and the red lamp is off. The valid matching time is 60s. It tums off automatically after the time expires. 3.After successful pairing, the UI on the TV set displays successfully. The glasses enters the operating status and darkness starts to change to view 3D effects. 1.Before code pairing, it is recommended to tum off the 3D setting of same kind of TV set 3-5 meters around or the menu to prevent error pairing, and pairing within 50cm. 2.If the glasses pairing fails, the 3D signal is not sent out by the TV set. Please check in accordance with the procedures blow. 3.Re-pairing is needed after the 3D TV set was repaired. glasses, please stop using the glasses. 10.Disassembling or refitting must be conducted by professional technician. 11.Chemicals are prevented from the product. 12.Do not shake the products forcefully. 13.DO not use this product with light radiation or heat radiation. 14.Do not use this product in movement. 15.Clean leans with lean and soft special glasses to clean the lens. Do not wipe off forcefully. 16.It is not forbidden to scratch, knock, collide or grind various object friction lens with hard objects. 17.Wearing the glasses to view 3D TV at a near distance for a long time may impair vision. It is suggested to have a breaker 2-3 hours later. 18.Wearing the glasses to view 3D TV at a near distance may arouse fatigue or discomfort. Please top viewing and have a break if you feel dazzling or tired. 19.In addition to viewing 3D TV, you are not permitted to use the glasses for purposes. Wearing the glasses (such as sunglasses/vision protection) may impair vision. 20.If the 3G glasses will not be used for a long time, the 3D glasses cannot be used to avoid damage. Operation keys and instructions of 3D glasses 1.Press the switch key (short), the red lamp twinkles once (lamp on 1S) to tum on and the red lamp tums off after tuming-on is completed. 2.At the tum-on status, long press the switch key 3S to enter the switch-on status. The red lamp twinkles three times
(frequency 1Hz). 1.No signal is available when the glasses tums on and tums off 30S later. The glasses automatically tums off after losing signal and give tum-off (frequency 1Hz) information. 2.In the process of the TV set operating, when the battery voltage is lower than 2.6V, the red LED lamp twinkles at the tate of 2HZ to remind low voltage until the glasses tums off. Health tips:
1.Pregnant and personnel with poor physical conditions, heart diseases or easily suffering from nausea is not recommended using the shutter glasses to view 3D contents. 2.Children under the age of 3 years old are not recommended viewing 3D contents. Due to immature vision, it cannot sense better effects and the vision may be impaired after long-term effects. 3.You may suffer from head pain or fatigue when you view 3D contents for a long time. If you feel any comfortable, please stop viewing and have a break. If the symptom cannot be relieved, please consult doctor. 4.Some of personnel may involve diseases or other complication diseases stimulated by specific images, flashing or simulated pictures while viewing videos or programs. If you your relatives or relatives have the record of diseases, please consult doctor. Dear users: thank you for purchasing the Company's products. It is believed that this brand-new can bring endless happiness to you. Please read the instructions before use and keep properly. The Company does not bear any responsibilities by accidents arising from breaching notes and instruction manual. This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Certificate of conformity Date of production:
Quality inspector:
Le prsent appareil est conforme aux CNR d'industrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) lay aparel ne doit pas produire de brouillage, et t ) Tutilisateur de l'appareil doit accepter tout brouillage fadiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. Caution: changes or modifications not expressly approved by the party responsible for compliance.