ELEC-TECH INTERNATIONAL CO., LTD. Product Instruction Manual Product Name: LED ceiling lamp Model No. 540747####00-99 Manufacturer: ETI Solid State Lighting (Zhuhai) Ltd Address: No.1, Zhongzhu Road South,Science & Technology Innovation Coast, High Tech District, Zhuhai City, Guangdong Prov., China Page 1 of 11 Contents 1. Product Introduction .................................................................................................................................... 3 1.1. Product Description ................................................................................................................................. 3 1.2. Product schematic diagram: ...................................................................................................................... 3 2. Product Featuers: ....................................................................................................................................... 3 2.1. Product characteristics ........................................................................................................................ 3 2.2 Specification ............................................................................................................................................ 4 2.3 Light distribution Light distribution pattern ........................................................................................ 4 I luminance distribution ...................................................................................................................... 4 3Installation Instructions .............................................................................................................................. 5 4Maintenance instruction ............................................................................................................................ 9 5Environment requirement .......................................................................................................................... 9 6Package Carried Standard ........................................................................................................................ 9 7. Package Instruction .................................................................................................................................. 10 7.1 Packing Specification .......................................................................................................................... 10 7.2 Package list ........................................................................................................................................ 10 Page 2 of 11 1. Product Introduction 1.1. Product Description Dimension: 305x91mm Lamp plate : SPCC Powder spray, lamp cover:PMMA optical diffuser built-in drive&fire prevention drive box SUM-LED-2835 1.2. Product schematic diagram 2. Product Featuers 2.1. Product characteristics a. Long lifetime (above 50,000hrs), 7 times of lifetime of fluorescent lamp:
b. High efficiency, energy saving, environmental friendly (A 14W led lamp can replace a 60 w electric incandescent lamp , saving 60% of energy ) c. Impact resistant, shock resistant, no UV and IR radiation: high conversion rate and adaptable to severe environment , universal application to office ,hotel ,supermarket ,school and library ,etc d. Green Initiative, no harmful gas is emitted, low heat is generated while used, safe and reliable . e. Authentic and pure light color, no flicker, protecting your eyes while providing better visual enjoyment . Page 3 of 11 2.2 Specification Item Electronic ratings Rated Power/W Rated Input voltage/V Frequency/Hz Rated Power efficiency Rated Power FactorPF Rated Input current/A Rated I THD Whether the dimming RatedR9 Photometric ratings LED type/Qty. Rated Lumen Output Illuminance(1.5m)/Lux KCCT Parameter 15W AC120V 60Hz 87%
0.7 0.125A
<20%
No
>0 SMD2835 /88PCS 1600lm 4000K Ra CRI Beam Angle Physical information Material operating temperature storage temperature IP rating
(Luminaire dimension(LWH)/mm Net weight/g Lifetime/hrs 2.3 Light distribution Light distribution pattern 80 120 SPCC+PMMA 2045 4060 IP20 305x91 50000h I luminance distribution Page 4 of 11 3Installation Instructions 1. Put the Fixture flat on the desktop, turn the lamp shade counterclockwise , and then take out the lamp shade 2. If necessary, according to the actual needs, choose to set the microwave induction distance(for details on height and manner of installation, see Radar Sensor Specification), time, trigger the brightness of induction. 2.1 The factory setting is:
Detection range of 75% / waiting time of 5 minutes / light failure (that is, regardless of day and night, it was all bright, people left after the delay off) 2.2 This sensor is a moon switch, turns on the light on detecon of movement, and turns off aer a pre-selected hold-me when no movement around. A daylight sensor is also built-in to prevent the light from switching on when there is sufficient natural light. 2.2.1With sufficient natural light, the light does not switch on when presence detected. Page 5 of 11 2.2.2 With insufficient natural light, it switches on the light automat when person enters the room. 2.2.3 The sensor switches off the light automatically off. When there is no person detected. 2.3 Detection pattern Page 6 of 11 2.4 Settings 3. Install the electrical box screws#8-32UNC in the junction box. Page 7 of 11 4. Connect the black color L line(Mark 1) to the L line come out from junction box with the wirecap. Connect the white color N line(Mark 2) to the N line come out from junction box with the wirecap. Connect green color ground line(Mark 3) to the ground line come out from junction box with the wirecap. 5. Put the central holes of the fixture plate across the screw of the junction box. 6. Rotate fixture plate per the direction of arrow and lock it tightly with the screw lock Page 8 of 11 7. Reinstall the lens to fixture and make sure the lens is fastened to the fixture. 8. Turn on power 4Maintenance instruction 4.1 Do Not use volatile solvent such as alcohol to clean the troffer. 4.2 Use soft cotton cloth with suds to clean the troffer . 4.3 Non-profecssional Do not attempt to take apart and repair the troffer . 4.4 Please use the constant-current driver exclusively adaptive to the troffer, do not change the driver without permission . 5Environment requirement Operating temperature -2045Storage temperature -4060 6Package Carried Standard UL-1598/UL8750/ ENERGY STAR Page 9 of 11 7. Package Instruction 7.1 Packing Specification 7.2 Package list Package size Lamp Qty./box Net weight Gross weight Item Ceiling lamp Instruction manual screw Wiring cap mm Set/box Qty. 1 1 2 3 Page 10 of 11 FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. IC STATEMENT This device complies with Industry Canadas licence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonctionnement. RF Exposure The device has been evaluated to meet general RF exposure requirement. The device can be used in fixed/mobile exposure condition without restriction. This device and its antenna(s) must not be co-located or operation in conjunction with any other antenna or transmitter. Page 11 of 11