Printed Matter No. 6159928470 Issue No. Date Page 02 05/2021 1 / 8 Tracker Safety Information Valid from Serial No. 49032100000 to 49992399999 Only for internal use Model TRACKER - EABS Part number 6158134150 Download the latest version of this document at www.desouttertools.com/info/6159928470 WARNING To reduce risk of injury, everyone using, installing, repairing, main-
taining, changing accessories on, or working near this tool MUST read and understand these instructions before performing any such task. DO NOT DISCARD - GIVE TO USER Table of Contents Technical Data ...................................................................................................3 Technical data .............................................................................................3 Power supply ....................................................................................3 Power consumption ..........................................................................3 Weight ..............................................................................................3 Storage and use conditions..............................................................3 Wireless Communication specifications ...........................................3 Declarations .......................................................................................................3 EU DECLARATION OF CONFORMITY ......................................................3 WEEE ..........................................................................................................4 FCC compliance Class A.............................................................................4 IC compliance Class A ................................................................................4 Regional Requirements ...............................................................................5 Information Regarding Article 33 in REACH................................................5 Safety ..................................................................................................................5 Intended use ................................................................................................5 Product Specific Instructions .......................................................................5 Minimum firmware and software releases ........................................5 Installing the tracker .........................................................................5 How to power on and enable the tracker..........................................6 Safety instructions .......................................................................................6 Useful Information .............................................................................................6 Website........................................................................................................6 Information about installation manuals ........................................................6 Information about spare parts......................................................................6 Country of origin ..........................................................................................6 Safety Data Sheets MSDS/SDS ..................................................................6 Copyright .....................................................................................................6 e s u l a n r e t n i r o f l y n O 2 / 8 05/2021 Safety Information Frequency (MHz) *
Bandwidth (MHz) *
Max. value of peak power
(dBm) Authorized countries **
Channel Centre Frequency (MHz) Frequency (MHz) *
Bandwidth (MHz) *
Max. value of peak power
(dBm) Authorized countries **
Channel Centre Frequency (MHz) Frequency (MHz) *
Bandwidth (MHz) *
Max. value of peak power
(dBm) Authorized countries **
3228 4659.2 1331.2
< 0 Europe, USA, Canada 5 6489.6 6240 6739.2 499.2
< 0 Europe, USA, Canada 7 6489.6 5980.3 6998.9 1081.6
< 0 Europe, USA, Canada
*: according to UWB IEEE802.15.4-2011
**: before using, note that the Tracker must be set to be com-
pliant to local regulations. Some channel may be locally pro-
hibited. Contact your Desoutter representative for more in-
formation. Declarations EU DECLARATION OF CONFORMITY We, Ets Georges Renault, 38 rue Bobby Sands, 44818 Saint Herblain, France, declare under our sole responsibility that the product (with name, type and serial number, see front page) is in conformity with the following Directive(s):
2011/65/EU, 2014/53/EU e s u l a n r e t n i r o f l y n O Harmonized standards applied:
EN 62841-2-2:2014+C1:2016, EN 62479:2010, EN 302 065 V2.1.1, EN 301 489-33:2017 v2.2.0 Authorities can request relevant technical information from:
Pascal ROUSSY, R&D Manager, 38 rue Bobby Sands, 44818 Saint Herblain, France Saint-Herblain, 2020/06/02 Pascal ROUSSY, R&D Manager Signature of issuer Technical Data Technical data Power supply Powered by the tool (5 V) Power consumption 2.5 W Weight 0.02 kg 0.044 lb Storage and use conditions Storage temperature Operating temperature Storage humidity Operating humidity Altitude up to Usable in Pollution degree 2 environment Indoor use only
-20 to +70 C (-4 to +158 F) 0 to 45 C (32 to 113 F) 0-95 % RH (non-condensing) 0-90 % RH (non-condensing) 2000 m (6562 feet) Wireless Communication specifications Channel Centre Frequency (MHz) Frequency (MHz) *
Bandwidth (MHz) *
Max. value of peak power
(dBm) Authorized countries **
Channel Centre Frequency (MHz) Frequency (MHz) *
Bandwidth (MHz) *
Max. value of peak power
(dBm) Authorized countries **
Channel Centre Frequency (MHz) Frequency (MHz) *
Bandwidth (MHz) *
Max. value of peak power
(dBm) Authorized countries **
1 3494.4 3244.8 3744 499.2
< 0 USA, Canada 2 (default) 3993.6 3774 4243.2 499.2
< 0 Europe, USA, Canada 3 4492.8 4243.2 4742.4 499.2
< 0 Europe, USA, Canada Channel Centre Frequency (MHz) 4 3993.6 05/2021 3 / 8 Safety Information WEEE Information concerning Waste of Electrical and Electronic Equipment (WEEE):
This product and its information, meets the requirements of the WEEE Directive (2012/19/EU), and must be handled in compliance with the directive. The product is marked with the following symbol:
This portable equipment with its antenna complies with FCCs radiation exposure limits set forth for an uncontrolled environment. To maintain compliance, follow the instructions below :
1. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. Avoid direct contact to the antenna, or keep contact to a minimum while using this equipment. e s u l a n r e t n i r o f l y n O Products marked with a crossed-out wheeled bin symbol and a single black bar underneath, contain parts that must be han-
dled in compliance with the WEEE Directive. The entire product, or the WEEE parts, can be sent to your Customer Center for handling. FCC compliance Class A This device complies with Part 15 of the FCC Rules. Any changes or modifications not expressly approved by the man-
ufacturer could void the users authority to operate this de-
vice. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this de-
vice must accept any interference received, including inter-
ference that may cause undesired operation. FCC Responsible party:
Name: Mark Johnson Position: General Manager Address: Chicago Pneumatic Tool Company LLC 1815 Clubhouse Road Rock Hill SC 29730 USA Mobile: +1 800 624 4735 Email: mark.johnson@desouttertools.com NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pur-
suant to Part 15 of the FCC Rules. These limits are de-
signed to provide reasonable protection against harmful interference when the equipment is operated in a com-
mercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not in-
stalled and used in accordance with the instruction man-
ual, may cause harmful interference to radio communi-
cations. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. Any changes or modifications to this equipment not expressly approved by Desoutter may cause, harmful interference and void the FCC authoriza-
tion to operate this equipment. The device is only in compliance if no changes or modifica-
tions is made to the device. The antenna is fixed to the device and no change in antenna or fixation of the antenna is accept-
able and such modification is considered to violate the Com-
pliance Statement. IC compliance Class A CAN ICS-3(A)/NMB-3(A)
(English) This device complies with Industry Canadas li-
cence-exempt RSSs. Operation is subject to the following two conditions:
(1) This device may not cause interference; and
(2) This device must accept any interference, including inter-
ference that may cause undesired operation of the device.
(French) Le prsent appareil est conforme aux CNR dIndus-
trie Canada applicables aux appareils radio exempts de li-
cence. Lexploitation est autorise aux deux conditions suiv-
antes:
1) lappareil ne doit pas produire de brouillage;
2) lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromet-
tre le fonctionnement.
(English) This equipment complies with RSS102s radiation exposure limits set forth for an uncontrolled environment un-
der the following conditions:
1. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
(Franais) Cet quipement est conforme aux limites dexpo-
sitions de la CNR102 applicables pour un environnement non contrl aux conditions suivantes:
1. Cet metteur ne doit pas tre co-localis ou oprer en con-
jonction avec toute autre antenne ou metteur.
(English) This portable equipment with its antenna complies with RSS102s radiation exposure limits set forth for an un-
controlled environment. To maintain compliance, follow the instructions below :
1. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. Avoid direct contact to the antenna, or keep contact to a minimum while using this equipment.
(Franais) Cet quipement portable avec ses antennes est conforme aux limites dexpositions de la CNR102 applica-
bles pour un environnement non contrl. Pour maintenir la conformit suivez les instructions ci-
dessous:
1 Cet metteur ne doit pas tre co-localis ou oprer en con-
jonction avec toute autre antenne ou metteur. 2 vitez tout contact direct avec l'antenne ou gardez le con-
tact au minimum pendant l'utilisation de cet quipement. 4 / 8 05/2021 Regional Requirements WARNING This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.p65warnings.ca.gov/
Information Regarding Article 33 in REACH The European Regulation (EU) No. 1907/2006 on Registra-
tion, Evaluation, Authorization and restriction of Chemicals
(REACH) defines among other things requirements related to communication in the supply chain. The information require-
ment applies also to products containing so called Substances of Very High Concern (the Candidate List). On 27 June 2018 lead metal (CAS nr 7439-92-1) was added to the Candi-
date List. In accordance with the above this is to inform you that cer-
tain electrical and mechanical components in the product may contain lead metal. This is in compliance with current substance restriction legislation and based on legit exemp-
tions in the RoHS Directive (2011/65/EU). Lead metal will not leak or mutate from the product during normal use and the concentration of lead metal in the complete product is well below the applicable threshold limit. Please consider lo-
cal requirements on the disposal of lead at product end of life. Safety DO NOT DISCARD - GIVE TO USER WARNING Read all safety warnings, instructions, il-
lustrations and specifications provided with this product. Failure to follow all instructions listed below may result in electric shock, fire, property damage and/or serious injury. Save all warnings and instructions for future refer-
ence. WARNING All locally legislated safety rules regard-
ing installation, operation and maintenance shall be respected at all times. Statement of Use For professional use only. This product and its accessories must not be modified in any way. Do not use this product if it has been damaged. If the product data or hazard warning signs on the prod-
uct cease to be legible or become detached, replace with-
out delay. The product must only be installed, operated and ser-
viced by qualified personnel in an industrial environ-
ment. 05/2021 5 / 8 Safety Information Intended use The tracker is designed for being installed on Desoutter EABS cordless nutrunners (see list below). No other use per-
mitted. For professional use only. Model EABS8-1500-4S EABS8-1500-4Q EABS12-1100-4S EABS12-1100-10S EABS12-1100-4Q EABS17-800-4S EABS17-800-10S EABS17-800-4Q EABS24-500-10S EABS24-500-4Q Part number 6151660870 6151660880 6151660890 6151660900 6151660910 6151660920 6151660930 6151660940 6151660950 6151660960 Trackers communicate with tracking bases installed in work-
stations via UWB (Ultra-Wide Band) technology. Model Tracking base Part number 6158133350 Product Specific Instructions Minimum firmware and software releases Product EABS CONNECT CVI CONFIG Release V 6.0.x V 2.1.5.x V 2.3.4.x Installing the tracker Remove the battery pack before assembly. e s u l a n r e t n i r o f l y n O WARNING Risk of Antistatic Discharge There is a risk of antistatic discharge if you do not ground yourself. Wear an antistatic wrist strap. 1. Remove the cover plate. Retain it for later use if required. Safety Information 2. Put the tracker into place. Tighten by hand. How to power on and enable the tracker Plug a battery pack to the tool. LED color blue - steady Description The tracking base is discon-
nected or not visible from Tracker. Safety instructions Read the Safety Information referenced 6159925210 deliv-
ered with the tool or available at https://
www.desouttertools.com/resource-centre. 1 Indicator Useful Information e s u l a n r e t n i r o f l y n O The indicator blinks 10 seconds in green during the startup indicating that the power supply is correctly provided by the tool. Go to CONNECT to enable the tracker. Refer to the Product Instructions of the Tracking base
(printed matter No. 6159925540) available at https://
www.desouttertools.com/resource-centre. The tracker will then communicate with the dedicated track-
ing base via UWB. The indicator blinks 5 seconds in red. Red blinking means no or corrupted firmware has been installed on the tracker. Tracker firmware upgrade process is explained inside the fol-
lowing document:
Refer to the Product Instructions of the Tracking base
(printed matter No. 6159925540) available at https://
www.desouttertools.com/resource-centre. Tracking base model type:
Tracking base type model Tracking base se-
rial number index Date of produc-
tion CE only CE & FCC LED color green - steady red - steady 4900xxxxxxx to 4903xxxxxxx From index = 0 to 3 4904xxxxxxx and later From index =
4 Before 2021 After 2021 Description The communication with the tracking base is established. The communication with the tracking base is not estab-
lished. Website Information concerning our Products, Accessories, Spare Parts and Published Matters can be found on the Desoutter website. Please visit: www.desouttertools.com. Information about installation manuals Detailed operating instructions, installation and upgrade manuals are available at https://www.desouttertools.com/
resource-centre. Information about spare parts Exploded views and spare parts lists are available in Service Link at www.desouttertools.com. Country of origin France Safety Data Sheets MSDS/SDS The Safety Data Sheets describe the chemical products sold by Desoutter. Please consult the Desoutter website for more information https://www.desouttertools.com/legal/sds. Copyright Copyright 2020, Ets Georges Renault, 38 rue Bobby Sands, 44818 Saint Herblain, France All rights reserved. Any unauthorized use or copying of the contents or part thereof is prohibited. This applies in particu-
lar to trademarks, model denominations, part numbers and drawings. Use only authorized parts. Any damage or mal-
function caused by the use of unauthorised parts is not cov-
ered by Warranty or Product Liability. 6 / 8 05/2021 Original instructions Founded in 1914 and headquartered in France, Desoutter Industrial Tools is a global leader in electric and pneumatic assembly tools serving a wide range of assembly and manufacturing operations, including Aerospace, Automotive, Light and Heavy Vehicles, Off-Road, General Industry. Desoutter offers a comprehensive range of Solutions -tools, service and projects- to meet the specific demands of local and global customers in over 170 countries. The company designs, develops and delivers innovative quality industrial tool solutions, including Air and Electric Screwdrivers, Advanced Assembly Tools, Advanced Drilling Units, Air Motors and Torque Measurement Systems. Find more on www.desouttertools.com More Than Productivity Ets Georges Renault 38 rue Bobby Sands 44818 Saint Herblain - FR Phone:+33 (0)240 802 000 www.desouttertools.com