WhisperConnectTM Sensor 900 MHz Nursery Monitor Pet Detection 6. The Babys Unit (transmitter) is operated by a hardwired (non-removeable) AC adapter. DO NOT attempt to remove the AC adapter; doing so can affect your safety. The Parents Unit (receiver) is operated by rechargeable batteries that are included with your monitor or by the Evenflo AC adapter (provided). Use only the Evenflo adapter included with this unit. DO NOT use this adapter with other equipment or use other equipments adapters with this monitor under any circumstances. 7. Protect the AC adapter cords. Route cords so they are not walked on, pinched by items placed upon them, or run-over by vacuum cleaners. 8. DO NOT immerse any component in water. Clean the monitor with a dry cloth. 9. DO NOT use near fluorescent lights, appliances with motors, televisions, fans or other machinery. These items may interfere with the quality of your monitors transmission or reception. 10.Adapter must be removed from the receiver for battery operation. 11.DO NOT use the monitor if:
Either adapter cord has been damaged.
Objects have fallen onto or liquid has been spilled into any of its components.
It has been exposed to rain or water.
It has been dropped or something inside is damaged.
If any parts are missing or broken, call Evenflos ParentLink at 1-800-233-5921 for instructional literature or product information if needed. Important: Read and keep these instructions for future reference. Thank you for purchasing the Evenflo WhisperConnect Pro Nursery Monitor. If you have any questions or problems with your Evenflo WhisperConnect Pro Nursery Monitor please do not return it to the store; call Evenflos ParentLink at 1-800-233-5921, Monday through Friday 8:00 AM to 7:00 PM EST. Model Number: Your WhisperConnect Pro Nursery Monitor model number is 6461500. Answers. Advice. Affirmation.
www.evenflo.com
USA & Canada: 1-800-233-5921
Mxico: 01-800-706-12-00 UL Listed Adapter. FCC Approved. WARNING
DO NOT OPEN. NO USER SERVICEABLE PARTS INSIDE. RISK OF ELECTRIC SHOCK. MAY CAUSE INJURY, FIRE, OR DEATH.
DO NOT use near water.
DO NOT place furniture on cord.
NEVER place the babys unit or its adapter in the crib or playpen, or within the childs reach.
DO NOT hang this monitor near or on a crib. The cord can present a strangulation hazard.
Always keep the unit out of childrens reach.
DO NOT use this monitor if it is broken or missing parts.
This product is designed and intended to be used solely to monitor the actions of a sleeping child.
DO NOT use this monitor with products that warn the user: NEVER LEAVE CHILD UNATTENDED.
This product does not replace responsible adult supervision of a child.
You should check your child regularly as this product will not detect your childs quiet activities.
This product is not intended to be used as a medical monitor, and its use should not replace adult supervision.
Make sure the Parents and Babys units are functioning properly, on the same channel, and within reception range of each other.
It is essential to check the sound reception regularly. Important Safety Instructions The Evenflo WhisperConnect Pro Nursery Monitor should NOT be used as a replacement for adult supervision of children. Please note that any modification to the Babys Unit (transmitter) or Parents Unit (receiver) will violate FCC compliance and can void the users authority to operate this monitor set. 1. Read and observe all warnings on the product and in this Owners Manual. Pay special attention to information marked WARNING and IMPORTANT. This information can affect your childs safety. Keep this Owners Manual nearby for quick and easy reference. 2. Avoid placement near water or moisture. DO NOT use Babys Unit outdoors. DO NOT use your monitor near a bathtub, shower, sink, laundry tub, swimming pool, wet basement, or other locations where water or moisture may result in electrocution. 3. Allow for proper ventilation of the adapters and the monitors. DO NOT place your monitor on or under a rug, bed, sofa, blanket or similar object that blocks its ventilation. DO NOT place it in a built-in installation such as a bookcase or stereo cabinet. These may impede the air flow through the ventilation openings. 4. Remove the batteries from the monitor components and unplug the AC adapters if the monitor will not be used for a long period of time. 5. Avoid placement near heat sources. DO NOT use your monitor near a radiator, stove, heat register, or other appliance (including amplifiers and TVs) that produce heat. Heat can damage the case or components. 12.Refer to the Troubleshooting Chart in this Owners Manual before returning your monitor for servicing. You may be able to solve the problem on your own in very little time. 13.There are no serviceable parts inside these monitors. DO NOT open the cases. 14.This device complies with part 15 of the FCC rules. Operation is subject to the following tw o conditions: (1) This device may not cause harmful interference, and (2) this device mus t accept any interference received, including interference that may cause undesired operation. Helpful Hints
For best results, use your AC adapter(s) with the monitor. The power is more consistent than that of the battery.
For best battery performance, allow batteries to completely discharge every few weeks.
This nursery monitor operates over public airwaves. Transmissions from your Babys Unit may be picked up by another product operating on the same frequency. Your Parents Unit may also pick up transmissions from another product on the same frequency. If interference occurs, change BOTH your Babys and Parents Units to the alternate frequency channel.
Always make sure that both units are on the same frequency channel. It is possible for the Parents Unit to pick up the Babys Unit even if they are not on the same channel when both units are close together; however, youll experience static and interference. WARNING Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and Parents Unit (receiver).
Connect the equipment into an outlet on a circuit that is different from the Parents Unit (receiver).
Consult the dealer or a qualified radio-TV technician for help. Features Operational Range: Your monitors typical transmission/reception range is 650 feet (198 m) depending on battery power and possible obstructions (i.e., walls) that radio waves encounter. The methods and materials used in your homes construction, terrain and other factors may also affect transmission. Power Light: The Power Light will illuminate green whenever the unit is turned on, whether the unit is stationary (plugged into adapter) or portable (using battery power). Channel A/B: If interference occurs, change BOTH your Babys Unit and Parents Unit to the alternate frequency channel. The WhisperConnect Pro Nursery Monitor operates over public airwaves. Transmission from your Babys Unit may be picked up by another product if it is on the same frequency. Your Parents Unit may also pick up transmission from another product if it is broadcasting on the same frequency. Sound LightsTM: Sound Lights light up when the Parents Unit receives sounds. The more lights that are lit, the louder the sounds. Low Battery Indicator: When battery power in the Parents Unit is low, the Power Light/Low Battery Indicator will flash. To recharge, attach the AC adapter to the Parents Unit, plug the AC adapter into a standard wall outlet, then set Power/Volume Dial to ON. Out-of-Range Indicator and Alarm: All Sound LightsTM will light up and flash, and an alarm will sound on your Parents Unit if:
The units are taken out of range of one another. The units are set to different channels.
Power to the Babys Unit is lost. A strong interfering signal starts on the selected channel. The Out-of-Range Indicator and Alarm can only be stopped by re-establishing contact between the two units or by turning off the Parents Unit. This alarm feature is designed to give you confidence and reassurance that your Evenflo WhisperConnect Pro Nursery Monitor is functioning properly. Parent Unit Finder: Press the Finder Button on Babys Unit to activate the locating signal. Once the Parents Unit is located, turn Power Switch OFF then ON to deactivate the signal. Additional Receivers: You may expand WhisperConnect capacity by adding additional receivers
(sold separately). Use only Evenflo WhisperConnect Additional Receiver model 6461550 to expand this monitor system. Please consult the owners manual included with the additional receiver for warning and safety instructions. The Babys Unit (Transmitter) Finder Button Antenna AC Adapter witch tect. Lens Power Light Pet Detect. ON/OFF Channel Switch Using Your Monitor The Parents Unit (Receiver) Antenna Sound Lights AC Adapter Chan Swit Adapter Jack Power Light/
Low Battery Indicator Power/Volume Dial Pet Detection Light Speaker The Babys Unit is a transmitter, which sends sounds to the Parents Unit (receiver). It is powered by a hardwired (non-removable) AC adapter. 1. Place the Babys Unit on a hard flat surface that is higher than the baby and 5 to 10 feet away
(refer to illustration).
DO NOT place the Babys Unit directly above the baby.
DO NOT place it on a soft surface or it may tip over. 2. Direct the front of the Babys Unit towards the baby. Be sure that there arent any large Parents Unit. objects blocking the path between the Babys Unit and the baby. 3. Fully extend the cord, and plug the adapter into an electrical outlet. 4. Rotate the Power Switch from OFF to ON. The Power Light will glow green. 5. Slide the Channel Switch to Channel A or B. Ensure the Babys Unit is set to the same channel as the Parents Unit. 6. Turn Pet Detection ON or OFF, as desired. 7. Turn the Babys Unit OFF when not in use. 4ft 3 inch
(1.3m) The Parents Unit receives sound from the Babys s Unit (transmitter) and is powered by either rechargeable batteries (already in the unit) or by the AC adapter included with the unit. 1. Ensure Parents Unit is charged. To charge, connect AC adapter (provided) to Parents Unit and plug into standard wall outlet. To charge while monitoring, set Power/Volume Dial to ON. A full charge requires 12 continuous hours. 2. Check the channel switch. Ensure the Babys Unit is set to the same channel as the 3. Use the Parents Unit in a different room from the Babys Unit. 4. Place the Parents Unit where you can easily monitor it by sight or sound.
When using the adapter, plug it into a standard wall outlet.
When using batteries, wear the Parents Unit using the belt clip or place it where you can easily see or hear it. 5. Turn on the Parents Unit by rotating the Power/Volume Dial; adjust the volume. The Power Light will glow green. If the Power Light flashes, it indicates that battery power is low and Parents Unit needs to be recharged. NOTE: All sound Lights will light up and flash on the Parents Unit if it is not properly receiving signals from the Babys Unit. 6. Have someone speak into the Babys Unit to verify sound transmission. 7. Turn the Parents Unit OFF when not in use. 8 ft 6 inch (2,6 m)
) m 6
. 0
t f 2 h c 8 f t 6 i n 2 , 6 m )
) m 6
. 0
t f 2 When the Pet Detection Lens senses movement within range, an alarm will sound on the Parents Unit and the pet detection light will illuminate. To deactivate/reset the alarm, turn the parent unit OFF then ON. NOTE: The Pet Detection feature is NOT active within the first 20 seconds of being turned on. This allows adults sufficient time to move out of range. NOTE: If, after checking all of the solutions below, you believe that your WhisperConnnect Parent/Baby Unit is damaged, please call ParentLink at 1-800-233-5921. Troubleshooting Guide PROBLEM POSSIBLE CAUSE Power Light isnt working. Unit isnt getting power. Reception is poor due to static, buzzing or interference. All Sound Lights flash and alarm sounds (Parents Unit only). Power Light flashes
(Parents Unit only). Parents Unit is making a loud feedback noise. Parents Unit is picking up sounds or static from outside your home.
Other household appliances, cordless phones, fluorescent lights or motors may be disrupting the signal.
Parents Unit may be out of effective range.
Battery is weak.
Parents Unit is outside the transmission range of the Babys Unit.
Babys Unit and Parents unit are on different channels.
Babys Unit is not turned on, or not plugged into a working outlet.
Battery in Parents unit is weak. Battery is weak.
Babys Unit is picking up sounds from the Parents Unit because they are too close to each other.
Volume may be set too high. A neighbor has a similar baby monitor, cordless phone or walkie talkie that is transmitting sounds on the same frequency channel. SOLUTION
Make sure BOTH units are properly plugged into the wall and the outlet is switched on.
Make sure both the Parents Unit and the Babys Unit are set to the same channel.
Recharge battery by attaching the AC adapter and plugging it into an outlet.
Turn off, unplug or move the device that is causing the problem.
Move the Parents Unit closer to the Babys Unit.
Recharge battery by attaching the AC adapter and plugging it into an outlet.
Move Parents Unit closer to the Babys Unit.
Make sure that both units are set to the same channel.
Turn the Power Switch on the Babys Unit to the ON position.
Check the AC outlet to be sure it is working.
Recharge battery by attaching the AC adapter and plugging it into an outlet. Recharge battery by attaching the AC adapter and plugging it into an outlet.
Move the Parents Unit at least 10 feet away from the Babys Unit.
Lower the volume. Change the frequency channel that is in use. Be sure to change the channel on BOTH units. Limited Warranty For a period of 90 days from the original purchase of this Product, Evenflo warrants to the original end user
("Purchaser") this Product (including any accessories) against defects in material or workmanship. Evenflos sole obligation under this express limited warranty shall be, at Evenflos option, to repair or replace any Product that is determined to be defective by Evenflo and determined to be covered by this warranty. Repair or replacement as provided under this warranty is the exclusive remedy of the Purchaser. Proof of purchase in the form of a receipted invoice or bill of sale evidencing that the Product is within the warranty period must be presented to obtain warranty service. This express limited warranty is extended by Evenflo ONLY to the original Purchaser of the Product and is not assignable or transferable to subsequent purchasers or end users of the Product. For warranty service, contact Evenflos ParentLink Consumer Resource Center at
(800) 233- 5921 or www.evenflo.com. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON THIS PRODUCT IS HEREBY DISCLAIMED. EVENFLO SHALL NOT BE LIABLE FOR ANY INCIDENTAL, CONSEQUENTIAL, SPECIAL OR PUNITIVE DAMAGES OF ANY KIND FOR BREACH OF THE EXPRESS LIMITED WARRANTY ON THIS PRODUCT, OR ANY WARRANTY IMPLIED BY OPERATION OF LAW. OTHER THAN THE EXPRESS LIMITED WARRANTY SET FORTH ABOVE, THERE ARE NO OTHER WARRANTIES THAT ACCOMPANY THIS PRODUCT AND ANY ORAL, WRITTEN OR ANY OTHER EXPRESS REPRESENTATION OF ANY KIND IS HEREBY DISCLAIMED. Evenflo Company, Inc. 2004 25700006 4/04