FCC ID: 2ABWOMCR418NX 0.9 inch Alarm Clock Digital PLL FM Radio with Wireless

Use AC power adapter 1. Using the Supplied Power adaptor and take the power cable pin to insert to the back of the device DC IN. 2. Plug in the power adaptor to the wall plug or electric shocket. 3. Please be caution at all time that this Power Adaptor supports only 5V, 1.5A DC current. 4. Unplug the power adaptor at all time if not in use. Install battery 1. This device has a battery compartment in use of 2 x AAA battery (not included) to support RTC, Real Time Clock. 2.To replace the battery, simply open the battery compartment door at the back of the device and insert the batteries carefully in accordance with the Positive + and negative

-position. 3.The device is able to detect at low-battery status, if so, a LED light will blink, and a new set of batteries are required for replacement. PLESAE BE ADVISED THAT, this back up battery is mainly for support in case of power outage, the clock to work in order. Control Buttons Power ( On/ Off) Mode Volume Down Volume Up Pervious / Adjust Hour/ Radio Scan Up Play/ PAUSE/ SAVE Radio Channel Next / Adjust Min / Radio Scan Down Alarm Clock Set up Sleep Mode PAUSE / Snooze(Brightness) Clock Set up Bluetooth Pair Wireless Charging Pad USB Port For USB drive music play back AUX IN DC IN FM Antenna cable LED Display Radio Bluetooth USB mode AUX IN Alarm After-noon Time Clock Set Up Plug in power adapter, when the device is on for the first time, the clock shall display 12:00 and blink. Long press the "

" clock button when the display is on or flashing display, and press

" key to set hours, press "

" key to set minutes. Press "

"again."" the clock key is set when time is stored and completed. Brightness Set Up When the device is on Stand-by mode, the brightness on the display can be adjusted at three different stages. Press Snooze button to tune in High, Medium and Low. Radio There are two methods to tune radio Method 1: AUTO Search Mode 1. Press Play &Pause for auto search. All channels will be saved as P01, P02, P03 until the search is done. 2. Press Previous and Next to change Channels. Method 2: Manual Radio Search 1. Press & Hold Previous

: search will be conducted downwards. 2. Press & hold NEXT

: search will be conducted upwards. 3. On Manual search mode, searching will stop on every channel is being found. Improve radio reception Move around the FM antenna to get the best position for reception. Keep all digital audio player and mobile phones away from FM antenna at all time to minimize the disturbance. Alarm Clock Set Up This Alarm Clock supports two alarming sound, Pre-set Alarm sound or Radio. 1. Power on the device that is on Stand-by mode, Press and hold Alarm button, the display will blink, and alarm indication light will flash. 2. Press Previous button to set HOUR and Press next button to adjust Mins. Press alarm key to confirm and save. To change alarming sound, press Previous or NEXT buttons to change. The display shows bu2 as pre-set sound and rAd for radio. Press alarm to display alarm volume and press previous and next to adjust volume. 3. On Alarm mode, press Snooze to set up pause in mins, on loop in sequence, 10, 20,30,40,50,60mins. 4. On clock mode, press Snooze to check the remaining alarm time. Remark:

NO brightness adjustment is allowed when the device on alarm sound mode. Sleep timer Set Up You are able to choose Music Playback and Radio for sleep timer to end the working mode. 1. Press Sleep to set sleep timer. The timer has pre-set for 15, 30, 60, 90mins and it loops to OFF timer after 90mins. The clock display will return 3 seconds after the sleep timer mode is OFF. Remark:

Sleep timer mode, Press Sleep button to check the remaining time. Press Sleep Mode button to choose and set for the timer. AUX IN Set Up 1. Power ON the device 2. Press Mode to change the status to AUX IN. Check the display is on AUX mode. 3. Insert the audio cable (not included) to the LINE INthe device can play external audio files. Bluetooth Mode 1. Power on the Device 2. Press Mode button twice to make sure the device working mode on display is on BT mode. Press PAIR button for Bluetooth pairing. 3. Once is connected, the Bluetooth LED light will be on. 4. Press and hold PAIR button to end the paired device and return to pairing mode. USB Mode 1. The device is on 2. Press MODE button to set the device is on USB working mode as shown on display. Remark:

A. The device is on working mode, inserting any USB drive supporting with audio formats, the device shall read and play automatically. B. USB port for USB drive music play back. Please note that this USB port has 100mA electric supply or less, does not support smart phone or any high-power capacity charging. Wireless Power Charging 1. Align the position to where the mobile phone can detect the wireless charging. 2. The mobile phone will automatically sense the current and display the charging status on the mobile phone. 3. This device only supports mobile phones capable of and in accordance with the wireless charging protocol. Note:

If the position of mobile phone is not able to detect the transmitting coil, the mobile phone will not be charged, similarly if the protective case is not supporting wireless charging, you are required to remove the case and to place the mobile phone to the correct position. SPECIFICATIONS Adaptor Power source AC 100-240V~, 50/60Hz, 0.35A(Max) Output of the supplied AC/DC Adaptor Battery Backup Speaker Output Power DC 5V,1.5A 2x 1.5V AAA size batteries 4 ohms 2W Frequency Range (FM) 87.5 - 108 MHz Bluetooth Version V4.233 feet (10m) USB Port Support up to 32GB, (not included) for MP3 Playback Wireless Power Charging Rating 5V , 1A5W Accessories:

1 x Instruction booklet 1 x AC/DC Adaptor

FCC ID: 2ABWOMCR418NX SIZE: 35*100mm 0.9 inch Alarm Clock Digital PLL FM Radio with Wireless Model: MCR41808 FCC ID: 2ABWOMCR418NX FCC Statement: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

Everex Electronics Ltd Agent Authorization Company: Everex Electronics Ltd Address: Unit01, 19/F., Block A, Kailey Industrial Centre, 12 Fung Yip Street, Chai Wan, Hong Kong Product Name: 0.9 inch Alarm Clock Digital PLL FM Radio with Wireless Model Number(s): MCR41808 Product Description:0.9 inch Alarm Clock Digital PLL FM Radio with Wireless We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Title:

Company: Everex Electronics Ltd Fanhua woo manager Date:

Dec. 16, 2019

Everex Electronics Ltd Unit01, 19/F.,Block A, Kailey Industrial Centre, 12 Fung Yip Street, Chai Wan, Hong Kong Tel: +86-13424355423 Email: liubin198459@126.com Dec. 20, 2018 FCC ID: 2ABWOMCR418NX Model Number: MCR41808, MCR41808A, MCR41808B, MCR41808C, MCR41808D, MCR41808E, MCR41808F, MCR41808G To:

Federal Communication Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 To Whom It May Concern, We, Everex Electronics Ltd hereby declare that our product (0.9 inch Alarm Clock Digital PLL FM Radio with Wireless) Model Number: MCR41808, MCR41808A, MCR41808B, MCR41808C, MCR41808D, MCR41808E, MCR41808F, MCR41808G will conduct FCC compliance testing, the sDOC part in recognized test lab. (Shenzhen HUAK Testing Technology Co., Ltd.). The product above support BT function and WPC function, we will apply BT function by certification procedure and WPC function by sDoC procedure. The product conforms KDB 680106 D01 V03 Clause 5 b) as follows;

Requirements of KDB 680106 D01 Yes /

No Description Power transfer frequency is less than 1 MHz Output power from each primary coil is less than 15 watts Yes Yes The device operate in the frequency range 115.0 KHz - 205.0 KHz The maximum output power of the primary coil is 5W. The transfer system includes only single primary and secondary coils. This includes charging systems that may have multiple primary coils and clients that are able to detect and allow coupling only between individual pairs of coils. Client device is placed directly in contact with the transmitter. Mobile exposure conditions only

(portable exposure conditions are not Yes The transfer system includes single coil that is able to detect receiver device. Yes Client device is placed directly in contact with the transmitter. Yes Mobile exposure conditions only Everex Electronics Ltd Unit01, 19/F.,Block A, Kailey Industrial Centre, 12 Fung Yip Street, Chai Wan, Hong Kong Tel: +86-13424355423 Email: liubin198459@126.com the The EUT H-field strengths at 15 cm surrounding the device and 20 cm above from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. top surface covered by this exclusion). The aggregate H-field strengths at 15 cm surrounding the device and 20 cm above the top surface from all simultaneous transmitting coils are demonstrated to be less than 50% of the MPE limit. Please contact me if you have any question. Sincerely, Yes Fanhua woo Name:

Company: Everex Electronics Ltd Address:

Unit01, 19/F.,Block A, Kailey Industrial Centre, 12 Fung Yip Street, Chai Wan, Hong Kong Tel: +86-13424355423 Email: liubin198459@126.com

Everex Electronics Ltd Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Date: Dec. 16, 2019 Subject; Request for Confidentiality FCC ID: 2ABWOMCR418NX To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuantto KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name: Fanhua woo Title: manager

Everex Electronics Ltd Model Confirmation Letter We, Everex Electronics Ltd , certify the product: 0.9 inch Alarm Clock Digital PLL FM Radio with Wireless , Model No.: MCR41808, MCR41808A, MCR41808B, MCR41808C, MCR41808D, MCR41808E, MCR41808F, MCR41808G All models the function, software and electric circuit are the same, only with a product's outward (the color of the appearance)and model named different. Signiture:

Grantee Contact: Fanhua woo Company Name: Everex Electronics Ltd Date: 2019-12-16