WD-MSO 2.4GHz/5GHz WLAN(IEEE 802.11a/b/g/n) Stand-alone Module TABLE OF CONTENTS 1. APPLICATION ................................................................................................................................................................... 3 2. QUALITY ........................................................................................................................................................................... 3 3. APPEARANCE AND CHARACTERISTICS ...................................................................................................................... 3 3.1 3.2 APPEARANCE ..................................................................................................................................................................................................... 3 CHARACTERISTICS ............................................................................................................................................................................................. 3 4. APPLICATION OF 2.4GHZ/5GHZ WLAN(802.11A/B/G/N) STAND-ALONE MODULE ......................................... 3 5. ABSOLUTE MAXIMUM RATING .................................................................................................................................... 3 6. TEST ................................................................................................................................................................................... 3 7. MECHANICAL DIMENSION ........................................................................................................................................... 4 8. GENERAL DESCRIPTION ................................................................................................................................................ 5 9. EXTERNAL CLOCK REFERENCE ..................................................................................................................................... 5 9.1 EXTERNAL LPO SIGNAL REQUIREMENT ....................................................................................................................................................... 5 10. INPUT/OUTPUT DC TERMINAL CHARACTERISTICS ................................................................................................. 5 11. ELECTRICAL CHARACTERISTICS ................................................................................................................................... 5 11.1 OPERATING CONDITION .................................................................................................................................................................................. 5 11.2 2.4GHZ TX CHARACTERISTICS ....................................................................................................................................................................... 6 11.3 2.4GHZ RX CHARACTERISTICS ....................................................................................................................................................................... 6 11.4 5GHZ TX CHARACTERISTICS .......................................................................................................................................................................... 7 11.5 5GHZ RX CHARACTERISTICS .......................................................................................................................................................................... 7 12. PIN ASSIGNMENT (TOP VIEW, BOTTOM LAYER)...................................................................................................... 8 13. PIN DESCRIPTION ........................................................................................................................................................... 9 14. BLOCK DIAGRAM .......................................................................................................................................................... 10 15. POWER SEQUENCE ....................................................................................................................................................... 11 16. REVISION HISTORY ...................................................................................................................................................... 11 17. Warningn Statements ...11 1. Application This specification is applied to the 2.4GHz/5GHz WLAN(802.11a/b/g/n) Stand-Alone module of BIXOLON 2. Quality Quality should meet each condition which are mentioned on this specification. However, items which are not mentioned on this specification should follow the inspection agreements and standards which are agreed with both companies. 3. Appearance and Characteristics 3.1 Appearance Appearance should not be contaminated by harmful materials and have cracks etc. Mechanical dimension should meet the contents of clause 7. 3.2 Characteristics Electrical characteristics should meet the contents of clause 12. 4. Application of 2.4GHz/5GHz WLAN(802.11a/b/g/n) Stand-Alone Module WD-MSO is a 2.4GHz/5Ghz WLAN(802.11a/b/g/n) Stand-Alone Module for IoT(Internet of Things) such as Home electronic appliance, Room controller, Smart plug, etc. But, this module is not designed for Life Support Application. Also it is recommended that this module should be mounted by reflow soldering. 5. Absolute Maximum Rating Storage Temperature Supply Voltage VBAT_A, B VDDIO_1,2,RF VDD_MEM VDD_FEM Min.
-40
-0.5
-0.5
-0.5
-0.3 Unit deg.C V Max.
+85
+4.6
+4.0
+4.0
+5.0 6. Test Electrical characteristics are tested for every product. However, if there are any objections in judgment, it should be treated with agreements of companies. 3 7. Mechanical Dimension Dimension mm mm mm(Max.) Figure 1 and Figure 2 show the Bottom Layer (Top View) and the side dimension of WD-MSO package outline Figure 1. Package Outline (Top View) Figure 2. Package Outline (Side View) 4 8. General Description WD-MSO is a compact size and low power System-in-Package (SiP) for 2.4GHz/5GHz WLAN(802.11a/b/g/n) aimed at embedded and IOT applications. WD-MSO can be available as 3~46 pin. ( 28mm x 18mm x Max. 3.0mm ) 9. External Clock Reference 9.1 External LPO Signal Requirement Parameters External LPO Clock Nominal input frequency Frequency accuracy Input signal amplitude*
32.768 200 VDDIO Signal type Square-wave or sine-wave Input impedance
< 5 When power is applied or power is off
> 100k Unit kHz ppm mVp-p
-
pF Parameters 10. Input/Output DC Terminal Characteristics Conditions VDDIO=3.3V VOH High Level Output Voltage High Level Input Voltage Low Level Input Voltage
@100uA, 3.3V VDDIO=3.3V
@2mA, 3.3V VIH VIL
@100uA, 3.3V 0.7xVDDIO VDDIO-0.3 VDDIO-0.35 Min. Typ. Max. Max.
+85 4.5 3.6 3.6 4.4 Unit V V V V V V pF 0.3xVDDIO 0.4 0.4 5 Unit deg.C V
@2mA, 3.3V Min. Typ. 25 3.6 3.3 3.3 3.6
-30 3.3 3.0 3.0 3.2 5 VOL Low Level Output Voltage CIN Input Capacitance 11. Electrical Characteristics 11.1 Operating Condition\
Operating Temperature Supply Voltage VBAT_A,B VDDIO_1,2,RF VDD_MEM VDD_FEM
* The optimal RF performance specified in this datasheet is guaranteed for temperatures from -20~+70 11.2 2.4GHz Tx Characteristics All measurements are made under nominal supply voltage,
(VBAT_A,B = 3.3V, VDDIO_1,2, RF=3.3V, VDD_MEM=3.3V) and room temperature (25)condition. Parameters Conditions Frequency Range Output Power
(VBAT=3.3V, spectral mask, EVM compliance) 802. 11b, EVM = -9 dB OFDM , BPSK, EVM = -8 dB OFDM, QPSK, EVM = -13 dB OFDM, 16QAM, EVM = -19 dB OFDM, 64QAM 3/4, EVM = -25 dB OFDM, 64QAM 5/6, EVM = -28 dB Spec. Typ. Max. Unit
-
16.5 15 15 15 13 13 2500 MHz dBm Min. 2400 11.3 2.4Ghz Rx Characteristics All measurements are made under nominal supply voltage,
(VBAT_A,B = 3.3V, VDDIO_1,2, RF=3.3V, VDD_MEM=3.3V) and room temperature (25)condition. Parameters Frequency Range 11b, Rx Sensitivity
(8% PER for 1024 octet PSDU) 11g, Rx Sensitivity
(10% PER for 1024 octet PSDU) 11n, Rx Sensitivity
(10% PER for 4096 octet PSDU) Conditions CCK, 1 Mbps CCK, 2 Mbps CCK, 5.5 Mbps CCK, 11 Mbps OFDM, 6 Mbps OFDM, 9 Mbps OFDM, 12 Mbps OFDM, 18 Mbps OFDM, 24 Mbps OFDM, 36 Mbps OFDM, 48 Mbps OFDM, 54 Mbps HT20, MCS0 HT20, MCS1 HT20, MCS2 HT20, MCS3 HT20, MCS4 HT20, MCS5 HT20, MCS6 HT20, MCS7 Adjacent CCK, 1 Mbps (signal; -74dBm) 6 Min. 2400 35 Spec. Typ.
-
-96.5
-94.5
-92.5
-89.5
-93.5
-91.5
-90.5
-88.5
-86.5
-82.5
-79.5
-77.5
-93.5
-89.5
-87.5
-84.5
-81.5
-77.5
-76.5
-74.5
-
Max. Unit 2500 MHz dBm dB Channel Rejection CCK, 11 Mbps (signal; -70dBm) OFDM, 6 Mbps (signal; -79dBm) OFDM, 54 Mbps (signal; -62dBm) Max Input level 11.4 5GHz band Tx Characteristics 11b 1M,2M 11b 5.5M, 11M 11g 11n 35 16
-1
-
-
-
0 0
-10
-10 dBm All measurements are made under nominal supply voltage,
(VBAT_A,B = 3.3V, VDDIO_1,2, RF=3.3V, VDD_MEM=3.3V, VDD_FEM=3.3V) and room temperature
(25)condition Parameters Conditions Frequency Range Output Power
(VBAT, VDD_FEM=3.3V, spectral mask, EVM compliance) 11a, OFDM, 64QAM 3/4, EVM = -25 dB 11n, OFDM, 64QAM 5/6, EVM = -28 dB 11.5 5GHz Rx Characteristics Spec. Min. 4900 Typ.
-
13 13 Unit MHz dBm Max. 5845 All measurements are made under nominal supply voltage,
(VBAT_A,B = 3.3V, VDDIO_1,2, RF=3.3V, VDD_MEM=3.3V, VDD_FEM=3.3V) and room temperature
(25)condition Parameters Frequency Range 11a, Rx Sensitivity
(10% PER for 1024 octet PSDU) 11n, Rx Sensitivity
(10% PER for 4096 octet PSDU) Conditions OFDM, 6 Mbps OFDM, 9 Mbps OFDM, 12 Mbps OFDM, 18 Mbps OFDM, 24 Mbps OFDM, 36 Mbps OFDM, 48 Mbps OFDM, 54 Mbps HT20, MCS0 HT20, MCS1 HT20, MCS2 HT20, MCS3 HT20, MCS4 HT20, MCS5 HT20, MCS6 HT20, MCS7 Adjacent Channel Rejection 11a, OFDM, 54Mbps
(Signal : -62dBm) 7 Min. 4900
-1 Spec. Typ.
-
-92.5
-90.5
-89.5
-87.5
-84.5
-81.5
-77.5
-76
-91.5
-89.5
-86
-83
-80
-75.5
-73.5
-73 Max. Unit 5845 MHz dBm dBm Max Input level 11n, HT20, MCS7
(Signal : -61dBm) 11a/n 12. Pin Assignment (Top View, Bottom Layer)
-2
-20 dBm No. Pin Name No. Pin Name No. Pin Name 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 GND GND GND GND VDDIO_1 RSTN GP14 SF_SEL VDDIO_2 JTAG_SEL VDDIO_RF VBAT_A GND GND GND 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 35 36 37 38 39 40 41 42 43 44 45 46 SD_D1 GND SPI_MISO SPI_CS GND GP11 GP10 GND GND N/C GND GND GP12 GND GP13 VBAT_B CLK_RTC GP09 GP08 NC NC VDD_MEM GND SD_D2 SD_D3 SD_CMD SD_CLK 8 18 PMIC_EN 34 SD_D0 13. Pin Description Pin Num. Pin Name 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 GND GND GND GND VDDIO_1 RSTN GP14 SF_SEL VDDIO_2 JTAG_SEL VDDIO_RF VBAT_A GND GND GND PMIC_EN GP12 GND GP13 VBAT_B CLK_RTC GP09 GP08 NC NC VDD_MEM GND SD_D2 SD_D3 SD_CMD Description Module Ground GP5~GP15 IO PWR(JTAG, SDIO etc) RESET input Factory Reset input, Before 5GHz LNA Control output Serial Flash boot select GP5~GP15 IO PWR(JTAG, SDIO etc) JTAG Debug select GP00/GP01 IO PWR(Internal RF SW control)GP02/GP03 IO PWR Internal 1.4V DC_DC POWER input(3.3V~4.7V) Module Ground INTERNAL PMIC PWR EN UART2 TXD/GPIO UART2 CTS/GPIO UART2 RXD/GPIO Internal 2.5V LDO, 3.3V LDO POWER input(3.3V~4.7V) Low speed clock input UART0 RXD/GPIO UART0 TXD/GPIO Not connected (Internal SF_SIO0) Not connected (Internal SF_SCLK) Internal Flash Memory Power input Module Ground SDIO Data 2 SDIO Data 3/SDIO SPI Mode CS SD CMD/SDIO SPI Mode DI 9 SDIO Clock (~50 MHz)/SDIO SPI Mode CLK(~50MHz) SD Data 0/SDIO SPI Mode DO SD Data 1/SDIO SPI Mode IRQ Module Ground SPI_MISO SPI_CS Module Ground UART1 TXD/GPIO UART1 RXD/GPIO Module Ground Not connected Module Ground 33 34 35 36 37 38 39 40 41 42 43 44 45 46 SD_CLK SD_D0 SD_D1 GND GP05 GP07 GND GP11 GP10 GND GND NC GND GND 14. Block Diagram 10 Shield CAN 2.4/5G Chip A Tx Rx control Tx Rx 5GHz FEM control 2.4GHz Switch DIPLEXER VBAT VDDIO VDDIO_RF GPIO/UART SDIO/SPI CLK_RTC VDD_MEM WF5000 Wi-Fi Chip Serial Flash
(32Mbit) Ref CLK
(40MHz) Figure 3. Block Diagram VDD_FEM 15. Power Sequence VDDIO_3
.3[V]
VBAT_3.3[V]~4.7[V]
PMIC_EN RESET Min 10uS Min 10mS When VCC is below 3.0V, it must be reset. 11 Min 10uS SF_S EL Power down 16. Revision History Ver. 0.1 Initial release Comment Date Nov,18,2016 Approver Author Y.S.SEO 17. Warning Statements
<FCC Warning Statements>
FCC Part 15.19 Statements:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.105 statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help. FCC Part 15.21 statement Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. RF Exposure Statement The antenna(s) must be installed such that a minimum separation distance of at least 20 cm is maintained between the radiator (antenna) and all persons at all times. This device must not be co-located or operating in conjunction with any other antenna or transmitter. End Product Labeling The module is labeled with its own FCC ID and IC Certification Number. If the FCC ID and IC Certification Number are not visible when the module is installed inside another device, then the outside of the device into which the module is installed must also display a label referring to the enclosed module. In that case, the final end product must be labeled in a visible area with the following:
12 Contains FCC ID: 2AKMF-WD-MSO Contains IC: 22266-WDMSO RSS-GEN, Sec. 8.4 (licence-exempt radio apparatus) This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR dIndustrie Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :
(1) lappareil ne doit pas produire de brouillage, et
(2) lutilisateur de lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den compromettre le fonctionnement. RF Exposure The antenna (or antennas) must be installed so as to maintain at all times a distance minimum of at least 20 cm between the radiation source (antenna) and any individual. This device may not be installed or used in conjunction with any other antenna or transmitter. l'exposition aux RF Lantenne (ou les antennes) doit tre installe de faon maintenir tout instant une distance minimum de au moins 20 cm entre la source de radiation (lantenne) et toute personne physique. tiquetage du produit final (IC) Le module BT111 est tiquet avec sa propre identification FCC et son propre numro de certification IC. Si lidentification FCC et le numro de certification IC ne sont pas visibles lorsque le module est install lintrieur dun autre dispositif, la partie externe du dispositif dans lequel le module est install devra galement prsenter une tiquette faisant rfrence au module inclus. Dans ce cas, le produit final devra tre tiquet sur une zone visible avec les informations suivantes :
Contient module metteur identification FCC ID : 2AKMF-WD-MSO Contient module metteur IC : 22266-WDMSO 13