replaceable Battery with Non----replaceable Battery Transponder with Non Asset Transponder Asset replaceable Battery with Non Transponder Asset Asset Transponder with Non replaceable Battery EV3EV3EV3EV3----AAAATTTTNRBNRBNRBNRB This asset transponder, with non-replaceable SPECIFICATIONS battery, enjoys the benefit of its sister-product, EV3-AT. With its dramatically lower power consumption, this EV3-ATNRB boasts a non-
RFID Protocol ISO 18000-7:2008 replaceable battery lifetime much better, Frequency 433.92MHz resulting in a greatly improved ROI. This device operates in a master/slave configuration with an interrogator. In all cases, the interrogator acts as the master unit initiating Power Internal battery, primary lithium Battery Life 4 years at 2 collections per day commands from the transponder. Once, the Range 300 feet unobstructed device has been successfully woken up, it will respond to data transmission from the interrogator by sending packets of data. OPERATION OF THE TRANSPONDER Dimensions 6.18L x 0.984W x 0.67H Weight 2.1 oz (59.5 g) Operating Temperature
-30C to +70C This device complies with part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device must not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. WARNING: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. This Device has a non-replaceable battery and is Dust / Moist IP 64 ready for operation. MOUNTING OF THE TRANSPONDER This device can be mounted to a desired location using appropriate methods, such as magnet, Velcro strips, screws or other means;
Beeper Audible beeper location and indication for tag status Memory 2 Kbytes Compliance FCC, HERO