FCC ID: 2ATQQ-CG11Q6 11.6 Laptop

FCC regulatory conformance：

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions:

(1) This device may not cause harmful interference.

(2) This device must accept any interference received, including interference that may cause

undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference in a residential installation.

This equipment generates uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause harmful interference to

radio communications. However, there is no guarantee that interference will not occur in

a particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

is connected.

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver

-Consult the dealer or an experienced radio/TV technician for help

NOTE: The manufacturer is not responsible for any radio or TV interference caused by

unauthorized modifications to this equipment. Such modifications could void the user’s

authority to operate the equipment.

RF Exposure

The SAR limit of USA (FCC) is 1.6 W/Kg averaged over one gram of tissue. Device

has also been tested against this SAR limit. This device was tested for typical

body-worn operations with the back of the device kept 0mm from the body. To

maintain compliance with FCC RF exposure requirements, use accessories that

maintain a 0mm separation distance between the user's body and the back of the

device. The use of accessories that do not satisfy these requirements may not comply

with FCC RF exposure requirements, and should be avoided.

B black Camera printed in black MIC MIC 20101073 2701-G11Q64C-04C B matt gray 20101073 2702-G11Q64C-05C A matt purple, printed in silver 877C 877C logo: 46x15.7mm Caps Lock POWER Num Lock Charging indicator DC IN USB MINI HDMI 20 mm 16 mm USB SSD matt purple TF CARD headphone 64GB EV-C-116-7PR 2ATQQ-CG11Q6 7.4V, 5000mAh 12V 2A Sn Pad -MATT black logo:35x12mm MYLAY matt black C matt gray, printed in silver 877C 877C 20101073 2701-G11Q64C-02C 877C D matt purple, printed in silver 877C 20101073 2702-G11Q64C-06C

EVOO Products Company, LLC Agent Authorization Company: EVOO Products Company, LLC Address: 2651 Fairfax Avenue Culver City, CA 90232 Product Name: 11.6 Laptop Model Number(s): EV-C-116-7, EV-C-116-7BK, EV-C-116-7BL, EV-C-116-7PR Product Description: 11.6 Laptop We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Date: 2021-01-25 Signature:

Name:

Apple Liu Title:

Manager Company: EVOO Products Company, LLC

EVOO Products Company, LLC Date: 21 January , 2021 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 To Whom It May Concern:

The EVOO Products Company, LLC, the undersigned, hereby authorizes Mr. Wu Xuewen from Shenzhen BALUN Technology Co., Ltd., to act on the behalf of the EVOO Products Company, LLC solely in matters relating to the application for an FCC equipment authorization for FCC ID:

2ATQQ-CG11Q6 including the signing of documents in connection with this Application. Necessary acts carried out by Shenzhen BALUN Technology Co., Ltd. in connection with the Application shall have the same effect as acts of the EVOO Products Company, LLC. The EVOO Products Company, LLC also hereby certify that no party to this application is subject to a denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C. Section 862. Yours Sincerely, i sh a

Print name: Apple Liu Title: Mangaer EVOO Products Company, LLC

(EVOO Products Company, LLC) Declaration Of Identity Hereby we:

EVOO Products Company, LLC Basic Model Number: EV-C-116-7 Basic Brand Name: Evoo Basic Product Name: 11.6 Laptop Declare the Circuit, PCB Layout, Electrical Parts and Outlook of the following product(s) are identical to the basic model:

New/Additional Model Number(s): EV-C-116-7BK, EV-C-116-7BL, EV-C-116-7PR New/Additional Brand Name(s):

New/Additional Product Name(s):

Except the following(s): All models are same with electrical parameters and internal circuit structure, but only differ in shell material color. Remarks:

Signature with Company Chop:

Apple Liu

(Print Name) Date: 2021-01-25

EVOO Products Company, LLC Date: 21 January , 2021 To: Federal Communications Commission, Authorization & Evaluation Division, 7435 Oakland Mills Road, Columbia, MD 21046 RE: EVOO Products Company, LLC FCC ID: 2ATQQ-CG1106 FCC Certification Confidentiality Request Gentlemen:

This letter is to comply with 47 CFR 0.457 and 0.459 pertaining to confidentiality material. EVOO Products Company, LLC requests that the following documents regarding this submission for FCC ID : 2ATQQ-CG11Q6 be kept Long-Term confidential:

Exhibit Type File Name Block Diagram Block Diagram.pdf Schematics Schematics.pdf _ Operational Description Operational Description.pdf And below exhibit kept short-term confidential (180 days):

Exhibit Type File Name External Photos External Photo.pdf Internal Photos Internal Photo.pdf Test Setup Photos Test Setup Photos.pdf Users Manuals Users Manual.pdf Those documents contain detailed system and equipment description and related information about the product which EVOO Products Company, LLC considers to be confidential proprietary, a custom design and, otherwise, not releasable to the general public. Since this design is a basis form which future technological products will evolve, EVOO Products Company, LLC considers this information would be of benefit to its competitors, and that the disclosure of the information in these documents would give competitors an unfair advantage in the market.

"Thank you for your attention to this matter. Yours Sincerely, al (YF Print name: Apple Li Title: Mangaer EVOO Products Company, LLC \