ESCS-W20 Wireless Code Scanner User Manual V1.0 Statement The Company does not assume any responsibility for damage caused by use in unstated conditions in this manual. The Company does not assume any responsibility for damage or problem caused by the use of accessories not approved or provided by our company. The Company has the right to upgrade and improve the product without prior notice and the right to modify this document. Product Features Ergonomic design, easy to use. Supported both USB wired connection and Bluetooth/2.4G wireless connection. High-performance scan reader, easily read 1D and 2D barcodes on paper or LED screen. Transmission distance can reach up to 100m via 2.4G wireless connection. Large capacity rechargeable battery lasts a long continuous working time. Stable and durable, applying to flexible workplaces. Compatible with Windows, Linux, Android and iOS. Warnings DO NOT use in any potentially explosive gas or contact with conductive liquid. DO NOT disassemble or modify this product. DO NOT aim the device window direct to sunlight or high-temperature objects. DO NOT use the device in an environment with high humidity, excessively low or high temperatures, or electromagnetic radiation. Quick Guide scanning mode. preferred LED tips Plug the USB receiver into the host device or connect the scanner with your device via USB cable, press the button on scanner, when the beeper prompts, the scanner enters When the blue LED light on the sanner blinks, the sanner is in Bluetooth stanby mode, you can search for the scanner named BARCODE SCANNER on your mobile phone or PC and connect to it via Bluetooth. When the blue LED is steady on, the scanner connects successfully and enters scanning mode. When bluetooth and 2.4G are connected at the same time, bluetooth transmission is User can scan the QR code below to change the setting of the scanner. LED status Description Steady red light Battery charging mode Green light flashes one time Scanning successfully Blue light flashes every second Waiting for Bluetooth connection Steady blue light Bluetooth connected successfully Buzzer tips Buzzer status Description Continuous short beep 2.4G receiver pairing mode One short beep Bluetooth connected successfully One long beep Enter power-saving sleep mode Five beeps One beep Three beeps Low power Reading successfully Fail to upload data Receiver pairing Pair scanner to 2.4G receiver, scan the QR code below, the scanner enters pairing mode, then plug the USB receiver into you PC, the pairing will complete automatically.( The receiver shipped with the product is already paired by factory default) System settings Receiver pairing Restore factory default setting Show battery level Shutdown Buzzer setting Beep sound on(default) Beep sound off Sleep time setting code you want to set. Scan the sleep time setting QR code to enable time setting, and then scan the time QR Sleep time setting 30 seconds 60 seconds(default) 2 minutes 5 minutes 10 minutes Disable sleep mode Scanning mode Real-time transmission mode(default) **Storage mode
**Storage mode: scan and store barcode inside the scanner, and upload the data to your device when you need it by scanning the Upload data code. Data management Upload data Show total storage Clear all data Terminators Use<CR>(0x0D) as Terminator(default) Use<CR><LF>(0x0D,0x0A) as Terminator Use<HT>(0x09) as Terminator NONE Terminator Barcode Type Enable all barcode type Enable default barcode type(default) FCC STATEMENT :
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.