eSecuRD-BS User Manual
(V1.0) Excelsecu Data Technology Co., Ltd. All rights reserved www.excelsecu.com Table of Contents 1. 2. 3. 4. Product Overview........................................................................................................................3 Product Features......................................................................................................................... 3 Product Specs..............................................................................................................................3 How to Use It...............................................................................................................................4 www.excelsecu.com 1. Product Overview eSecuRD-BS Dual Interface Reader supports both ISO 7816 class A, B, C cards and ISO 14443 Type A and Type B cards. It is suitable for application systems with IC card operation and high-security requirements such as finance, social security, telecommunications, electronic payment, network security, e-commerce, identity authentication, and e-government. 2. Product Features USB 2.0 full speed interface PC/SC and CCID compatible Supports ISO 7816 CLASS A, B, C cards and ISO 14443 Type A and Type B cards The built-in anti-collision mechanism allows access to only 1 contactless tag at any time Short circuit protection 3. Product Specs Product eSecuRD-BS www.excelsecu.com Dimension Power Supply Current Sheathing Material Indicator Light Connectivity Communication Rate with Host Drive Protocol 66x39.9x7.8 (mm) USB Power Supply (5V)
<200mA PC 2 LED indicators (Red: Power/Blue: Data Communication) USB A type + Micro USB USB 2.0 FS (12Mbps) CCID, PC/SC WINDOWS Supported OS 7/8/10/Server-2016/2012/2008/2003, Mac Card Reader Standard OS above 8 ISO 7816 CLASS A/B/C, T=0/
ISO 14443 Type A/B Short circuit protection Supported Durability Operating Temperature Storage Temperature Operating Humidity Cards can be inserted and pulled out 100,000 times 0 ~+60
-10 ~+70 10%-90% (non-condensing) 4. How to Use It 1. Connect the reader to the USB port to power on, the red light is on. 2. Put the contactless card onto the reader or insert the contact card into the reader. www.excelsecu.com 3. When the blue light flashes, it means the card and the reader is performing data communication The table below shows the detailed status of reader Light color Red
(Power) Blue
(Contact/
Contactless) Light status Red off Red on Blue on Blue flashing Blue off explanation Power off Power on Card inserted/ Card putted on reader Contact/Contactless data communication No card inserted/ No card putted on reader eSecuRD-BS doesnt support using contactless and contact at the same time. The design is when inserted a contact card, the contactless interface will be blocked, and vice versa. www.excelsecu.com FCC STATEMENT:
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. www.excelsecu.com RF warning statement:
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. www.excelsecu.com