WIRELESS USER MANUAL Charging:
Connect the USB charging cable to the Micro USB port in the bottom of the left earcup and the USB end to a Device capable of USB charging. The light above the socket will glow RED while charging and go out when fully charged. Power On and Off Headset:
To Power On, press and hold the multifunction key about three seconds. You will see the blue indicator light flashes and will connect to the last paired device. If you have never paired the headset then you will need to pair it to a device. To Power Off, press and hold the multifunction key about five seconds. You will see the indicator lights stop flashing. CI CI Pairing:
1. Ensure that your music player or phone is switched on and you have enabled the Bluetooth function. 2. Power on the headset by pressing the multifunction key for about five seconds. The Red and Blue indicator lights will flash and the headset is ready to pair to your device. 3. Go to your Bluetooth feature on your music player or phone, and set it to CI search for Bluetooth devices. 4. Select KZ---- from the list of found devices on your music player or phone. 5. If necessary, enter the passcode 0000 to pair and connect the headset to your device. 2 Volume:
Function Keys:
CI NC 6. Active Noise Cancellation, press NC 1. Press and Hold to play previos track 2. Press and Hold to play next track 3. Press once to pause and press again to play 3 Product:
Krankz makes it easy so you can make and recieve calls hands-free with your compatible mobile phone while listening to your favorite music. Specifications:
Battery: 3.7 Vdc Lithium-Ion Polymer Battery 1. Talk & Play time: About 35 Hours, not using ANC function 2. 3. Standby Time: 30 Days 4. Charging Time: 4 Hours 5. Driver diameter: 50mm 6. Driver impedance: 32ohms 7. 8. 9. Range: 10meters (33ft) Frequency Response: 5-30kHz Bluetooth Packaging:
1. Maxx Headphones 2. 3. USB Charging Cable 4. 5. User Manual EVA Case Audio Connecting Cable 2018 EXEO ENTERTAINMENT, INC 1 Ea. 1 Ea. 1 Ea. 1 Ea. 1 Ea. 4 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. 5