FCC ID: OF6EIMWRCO8 HDR2.0

User manual

Power on in to sleep.

1. Push down ON Key, MOTO is Run.

Push down OFF Key, MOTO is Stop.

Push down STOP ALL key, All MOTO is Stop.

2. Push down any Key,LED is light. LED is Dark when Key up.

3. SW1 is ON, MOTO into one way.

SW1 is TMR, MOTO into continuous way.

SW1 is OFF,Remoter into Power OFF.

4.SW2 is to select three Code, Code P, Code A, Code B.

supply electricity:

The remoter is 6V, it is two button battery.it is Assembling

in shell.

Warning：

FCC Warning

This device complies with part 15 of the FCC Rules. Operation

is subject to the following two conditions:(1) This device may

not cause harmful interference, and (2) this device must accept

any interference received, including interference that may

cause undesired operation.

Any Changes or modifications not expressly approved by the

party responsible for compliance could void the user's

authority to operate the equipment.

This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to part 15 of the

FCC Rules. These limits are designed to provide reasonable

protection against harmful interference in a residential

installation. This equipment generates uses and can radiate

radio frequency energy and, if not installed and used in

accordance with the instructions, may cause harmful

interference to radio communications. However, there is no

guarantee that interference will not occur in a particular

installation. If this equipment does cause harmful

interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one or more

of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment

and receiver.

- Connect the equipment into an outlet on a

circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV

technician for help.

The device has been evaluated to meet general RF exposure

requirement. The device can be used in portable exposure

condition without restriction.

27MM FCC ID:OF6EIMWRCO08 MODEL NO.:El-MW-RC-08 THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES, OPERATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS:

(1)THIS DEVICE MAY NOT CAUSE. HARMFUL INTERFERENCE.

(2)THIS DEVICE MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION. MADE IN CHINA 29MM

C5266091_X10_Ed.2

Expedite International, Inc.

Office of Engineering Technology

Federal Communications Commission

7435 Oakland Mills Road

Columbia, MD 21046 Date: 8/18/2021

Subject: Request for Confidentiality

FCC ID: OF6EIMWRCO8

To Whom It May Concern,

Pursuant to the provisions of Sections 0.457 and 0.459 of Commission's rules

(47CFR0.457, 0.459), we are requesting the Commission to withhold the following

attachment(s) as confidential document from public disclosure.

Exhibits

ID Label/Location

Attestation Statement

External Photos

Block Diagram

Schematics

Test Report

Test Setup Photos

User’s Manual

Internal Photos

Parts List / Tune Up

RF Exposure Info

Operational Description

Cover Letter(s)

SDR Software / Security Info

Long-Term

Confidentiality

No

No

No

☒

☒

No

No

☐ NOTE 1

☐ NOTE 1

☐

No

☒

No

☐

Short-Term

Confidentiality NOTE 2

No

No

☐

☐

☐

No

☐

☐

☐

☐

No

☐

No

No

NOTE 1: Long-Term Confidentiality may be permitted under special conditions (See II. LONG-TERM CONFIDENTIALITY, Section 3 of

KDB 726920, use last in force)

NOTE 2: Short-Term Confidentiality can be requested for a maximum of 180 days from the date of the grant.

Above mentioned document contains detailed system and equipment description are

considered as proprietary information in operation of the equipment. The public

disclosure of above documents might be harmful to our company and would give

competitor an unfair advantage in the market.

In case of short-term Confidentiality, the applicant requests the exhibits selected above

are withheld from public view for a period of ______ days from the date of the Grant of

Equipment Authorization and prior to marketing.

It is our understanding that all measurement test reports, FCC ID label format and

correspondent during certification review process cannot be granted as confidential

documents and those information will be available for public review once the grant of

equipment authorization is issued.

1/1

C5266091_X10_Ed.2

Sincerely,

Signature:

Name: Jeff Hallbeck

Title: President

1/1

C5266091_X8_Ed.1 Letter of Authorization Expedite International, Inc. Company: Expedite International, Inc. Address: 1950 8th Ave. Baldwin, WI 54002, USA. Product Name: HDR2.0 Model Number: EI-MW-RC-08 FCC Identifier: OF6EIMWRCO8 We authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, to act on our behalf on all matters concerning the above named equipment. Any individual within LGAI Technological Center S.A. is authorized to act on our behalf and take action on the application. We declare that authorize LGAI Technological Center S.A., Ronda de la Font del Carme, s/n, 08193 Bellaterra, Spain, is allowed to forward all information related to the approval project to the Federal Communication Commission and to discuss any issues concerning the approval application. Any and all acts carried out by LGAI Technological Center S.A. on our behalf shall have the same effect as acts of our own. Name: Jeff Hallbeck Date: 8/18/2021 Title: President Signature of applicant:

1/1