app
s
|
Applicant Information
|
|
1 2
|
Effective |
2017-08-29
|
1 2
|
2017-08-25
|
1 2
|
Applicant's complete, legal business name |
Extreme Networks, Inc.
|
1 2
|
FCC Registration Number (FRN) |
0019588359
|
1 2
|
Physical Address |
6480 Via Del Oro
|
1 2
|
San Jose, California 95119
|
1 2
|
United States
|
|
app
s
|
TCB Information
|
1 2
|
TCB Application Email Address |
t******@timcoengr.com
|
1 2
|
TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
|
app
s
|
FCC ID
|
1 2
|
Grantee Code |
QXO
|
1 2
|
Equipment Product Code |
CDRDB
|
|
app
s
|
Person at the applicant's address to receive grant or for contact
|
1 2
|
Name |
T******** W********
|
1 2
|
Title |
Regulatory Compliance Manager
|
1 2
|
Telephone Number |
+1-60********
|
1 2
|
Fax Number |
1-603********
|
1 2
|
E-mail |
w******@Extremenetworks.com
|
|
app
s
|
Technical Contact
|
|
|
n/a |
|
app
s
|
Non Technical Contact
|
|
|
n/a |
|
app
s
|
Confidentiality (long or short term)
|
1 2 |
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
1 2 | Long-Term Confidentiality
Does this application include a request for confidentiality for any portion(s) of the data
contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | No |
|
if no date is supplied, the release date will be set to 45 calendar days past the date of grant.
|
|
|
app
s
|
Cognitive Radio & Software Defined Radio, Class, etc
|
1 2 |
Is this application for software defined/cognitive radio authorization? | No |
1 2 | Equipment Class | DTS - Digital Transmission System |
1 2 | NII - Unlicensed National Information Infrastructure TX |
1 2 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | 802.11 a/b/g/n/ac radio module |
1 2 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | Yes |
1 2 | Modular Equipment Type | Limited Single Modular Approval |
1 2 | Purpose / Application is for | Change in identification of presently authorized equipment. Original FCC ID: UZ7CDRDB Grant Date: 02/25/2016 |
1 2 | Change in identification of presently authorized equipment. Original FCC ID: UZ7CDRDB Grant Date: 05/17/2016 |
1 2 | Composite Equipment: Is the equipment in this application a composite device subject to an
additional equipment authorization? | Yes |
1 2 | Related Equipment: Is the equipment in this application part of a system
that operates with, or is marketed with, another device that requires an equipment authorization? | No |
1 2 | Grant Comments | Limited Single Modular Approval. Power listed is maximum combined conducted output power. Professional installation required. This device is restricted to fixed and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as in accordance with FCC multi-transmitter product procedures. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20 and 40 MHz bandwidth modes. This device is to only be installed in the following hosts; brand: Extreme Networks, models: AP-8533, AP-8533I, AP-8432I. |
1 2 | Limited Single Modular Approval. Power listed is maximum combined conducted output power. Professional installation required. This device is restricted to fixed and mobile use only. Device operates with specific antennas in MIMO configurations as described in this filing. Approval is limited to OEM installation only. Compliance of this device in all final host configurations is the responsibility of the Grantee. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 40 cm from all persons and must not transmit simultaneously with any other antenna or transmitter, except as evaluated in this filing. OEM integrators must be provided with antenna installation instructions and labeling requirements for finished products. OEM integrators and end-Users must be provided with transmitter operation conditions for satisfying RF exposure compliance. This grant is valid only when the device is sold to OEM integrators and the OEM integrators are instructed to ensure that the end user has no manual instructions to remove or install the device. Separate approval is required for all other operating configurations, including portable configurations with respect to 2.1093 and different antenna configurations. This device has 20, 40, and 80 MHz bandwidth modes.
This device is to only be installed in the following hosts; brand: Extreme Networks, models: AP-8533, AP-8533I, AP-8432I. |
1 2 | Is there an equipment authorization waiver associated with this application? | No |
1 2 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No |
|
app
s
|
Test Firm Name and Contact Information
|
1 2
|
Firm Name |
SPORTON International Inc.
|
1 2
|
Name |
S****** J****
|
1 2
|
Telephone Number |
886-3******** Extension:
|
1 2
|
Fax Number |
886-3********
|
1 2
|
E-mail |
s******@sporton.com.tw
|
|