ExtremeWireless 802.11ax Wi-Fi 6E AP3000X Indoor Access Point AP3000X Overview The AP3000X access point is an indoor model 802.11ax Wi-Fi 6E access point with external antennas. Out of the four external antennas on the unit, two 6G external antennas come built-in attached to the unit and cannot be removed. The other two 2.4G/
5G antennas are in the box. For information on antennas that can be purchased separately, see External Antenna Information . The AP3000X can be mounted on a flat surface such as a wall, solid flat ceiling, to a junction box or a gang box, and can be installed on a suspended ceiling or a drop ceiling. The AP3000X access point has the following features:
Radios:
Two 802.11ax radios (one 2X2 2.4GHz and 6 GHz radio, and one 2X2 5 GHz radio) One IoT Radio (2.4 GHz) Console port: Micro USB Two Ethernet ports (Eth0 and Eth1) Eth0: 2500/1000/100 Mbps auto-negotiation Ethernet port, RJ45, Power over Ethernet (PoE) at 802.3at Eth1: 1000/100/10 Mbps, RJ45 One multicolor status light One reset button One Kensington lock One USB 2.0 type A connector Power: PoE 802.3af and 802.3at (see Table 1 for details) Antennas: two external omnidirectional 2.4G/5G dual-band antennas, two 6G non-
removable antennas, and one Bluetooth Low Energy (BLE) antenna Temperature: -20C to +55C (-4F to +131F) Enclosure: Plastic Table 1 AP3000X Power source Power source Description Power over Ethernet (PoE) External 12V DC power supply
(optional; ordering part
#37215- PWR 12VDC/2A, 2.5mm x 5.5mm connector) Power is provided through the 2.5G Ethernet port of AP3000X, compliant to be powered with 802.3af and 802.3at to provide full functionality. For reduced functionality, use 802.3af. Power is provided through an external DC power supply plugged into an AC source. Figure 1 Top view of AP3000X Figure 2 AP3000X access point hardware components Table 2 Side ports on the AP3000X access point Callout Description 1 2 3 4 Console port USB port Reset button Kensington security slot Status LED Activity Description The AP3000X access point has one status light on top of the chassis. The status light conveys operational states for system power, firmware updates, Ethernet and wireless interface activity, and major alarms. Steady white: The device has successfully established a Control And Provisioning of Wireless Access Points (CAPWAP) connection to ExtremeCloud IQ and is operating normally. Slow-blinking white: The device has a CAPWAP connection to ExtremeCloud IQ, but is operating on 802.3af power instead of 802.3at power. Steady amber: The device is initializing, rebooting, or is running without a CAPWAP connection. Slow-blinking amber: The device has no CAPWAP connection to ExtremeCloud IQ, and is operating on 802.3af power instead of 802.3at power. Fast-blinking amber: The device is upgrading its IQ Engine firmware. Dark: power is off. Mounting bracket for Silhouette ceilings (ceiling grid with 1/8 in. or 1/4 in. bottom opening) Installation procedure Refer to the ExtremeWireless Access Point AP3000X Installation Guide. AP3000X Box Contents Ensure that the following items are available:
Table 3 Contents of the AP3000X Box Quantity Item 1 1 1 2 2 2 AP3000X access point AP3000X Quick Reference AH-ACC-BKT-AX-TB mounting bracket Phillips pan head wood screws Screw-in anchors 2.4 GHz/5 GHz external antennas Bracket part number Description Mounting bracket for Interlude (9/16 wide T-bar with protrusion) ceilings AH-ACC-BKT-AX-IL AH-ACC-BKT-AX-SL All optional brackets and accessories are sold separately. For detailed installation instructions about all mounting procedures, refer to the ExtremeWireless Access Point AP3000X Installation Guide in the Extreme Networks Documentation Support site. Install the Access Point Electrical Hazard: Only qualified personnel should perform installation procedures. ACC-BKT-AX-JB Use these instructions as guidelines for mounting and connecting the AP3000X access point easily and safely. The AP3000X comes with the AH-ACC-BKT-AX-TB mounting bracket that can be used to mount the access point on flat surfaces such as solid flat ceilings or wood walls. Note: The mounting procedures for installing the access point to non-standard ceilings are covered in the ExtremeWireless Access Point AP3000X Installation Guide. ACC-BKT-AX-BEAM Junction box or wall mounting for indoor access points Beam mounting for indoor access points Install the Access Point on a Wall or a Flat Ceiling Use the AH-ACC-BKT-AX-TB mounting bracket for flat surface wall or solid ceiling installation. Pre-installation checklist:
The following hardware is required for installing the AH-ACC-BKT-AX-TB accessory on a wall or a solid ceiling:
An AP3000X access point One AH-ACC-BKT-AX-TB mounting bracket Two M3.5 pan head wood screws Two screw-in anchors Note: The wood screws and screw-in anchors come in a separate plastic bag. 1 Using the AH-ACC-BKT-AX-TB mounting bracket as a template, mark and drill two mounting holes. 2 Attach the bracket to the wall using two M3.5 pan head wood screws. Use push-in anchors or screw-in anchors for drywall or plastic board installations on vertical walls. Note: Screw-in anchors must be used for ceiling installations. Mounting bracket for direct-to-wall installations when a 1.25 inches of space is desired between the wall and the access point AH-ACC-BKT-AX-WL Note: The default bracket for wall installation is the ACC-BKT-AX-JB bracket. Order the -JB bracket for new wall installations. The AH-ACC-BKT-AX-WL bracket is for users who already have the -WL brackets. Lock the Access Point after Installation Secure the access point by using the Kensington lock on the side of the access point. The security feature is used to prevent the access point from being removed from the mounting accessory. 3 Attach the access point to the bracket by aligning the red dot on the bracket and the access point. 4 Press and rotate the access point 1/8 turn clockwise until it clicks into place on the accessory. External Antenna Information The AP3000X access point comes with four external antenna connectors and is compatible with the ML-2452-APA2-02 and ML-2452-HPAG5A8-01 antennas. Note: For wall installation, the E logo must be on the left side of the access point as shown in Figure 1. 5 Attach the Cat5e RJ45 cable to the ETH0 port on the access point. Install the Access Point on a Non-Standard Ceiling Grid or a Wall For detailed non-standard ceiling grid installation or wall installation instructions, refer to the Wi-Fi 6 802.11ax Access Points Accessories Guide. The access point can be installed on a non-standard ceiling grid using the following accessories:
Table 4 Non-standard ceiling grid and wall accessories information Bracket part number Description Mounting bracket for Prelude ceilings (15/16 in. ceiling grid), Suprafine ceilings (9/16 in. ceiling grid), and walls. The ceiling tile sides must be flat AH-ACC-BKT-AX-TB Note: The ML-2452-APA2-02 and ML-2452-HPAG5A8-01 antennas must be purchased separately. The ML-2452-HPAG5A8-01 antenna requires the 25-
85392-01R adapter for mounting. Figure 3 AP3000X external antenna port connectors Table 5 AP3000X external antenna ports radio information Antenna ports Radio modes Radio port (2.4G/5G) Radio port (6G) 1 2 2.4G and 5G 5G
6G Table 6 AP3000X radio ports support information Radio port 2.4 GHz/5 GHz 6 GHz Antenna type Dual-band omni Omni Note: For antenna specifications and installation information, refer to the Wi-Fi 6 (802.11ax) Antenna Specifications Guide. Professional Installation Instruction Installation personnel This product is designed for specific application and needs to be installed by a qualified personnel who has RF and related rule knowledge. The general user shall not attempt to install or change the setting. Warning: Select the installation position and ensure that the final output power does not exceed the limit set forth in relevant rules. The violation of the rule could lead to serious federal penalty. Instructions d'installation professionnelle Installation Ce produit est destine a un usage specifique et doit etre installe par un personnel qualifie maitrisant les radiofrequences et les regles s'y rapportant. L'installation et les reglages ne doivent pas etre modifies par l'utilisateur final. Procedure d'installation Consulter le manuel d'utilisation ExtremeWireless Access Point AP3000X Installation Guide. Warning: Avertissement: Choisir avec soin la position d'installation et s'assurer que la puissance de sortie ne depasse pas les limites en vigueur. La violation de cette regle peut conduire a de serieuses penalites federales. Regulatory and Compliance Information Safety Guidelines This section contains notices that are intended to protect your personal safety and to prevent damage to the equipment. Qualified Personnel:
Electrical Hazard: Only qualified personnel should perform installation procedures. Within the context of the safety notes in this documentation, qualified persons are defined as persons who are authorized to commission, ground and label devices, systems, and circuits in accordance with established safety practices and standards. A qualified person understands the requirements and risks involved with installing outdoor electrical equipment in accordance with national codes. Federal Communications Commission (FCC) Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Operation in the band 5925-7125MHz subject to, (1) FCC regulations restrict the operation of this device to indoor use only, (2) the operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet, and (3) operation of transmitters in the 5.925 GHz - 7.125 GHz band is prohibited for control of or communications with unmanned aircraft systems. FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 47 cm between the radiator and your body. Conformit Europenne (CE) Information Warning: CE co-location MPE Statement: This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. Selling Countries:
AT EE IT PT BE FI LV RO BG FR LT SK HR DE LU SI CY EL MT ES CZ HU NL SE DK IE PL UK
(NI) CE Marking and European Area (EEA) Warning: This is a Class B product. In a domestic environment, this product may cause radio interference in which case the user may be required to take adequate measures. appareils radio exempts de license. Lexploitation est autorise aux deux conditions suivantes :
1 2 Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est Lappareil ne doit pas produire de brouillage;
susceptible den compromettre le fonctionnement. 4 It is the users responsibility to utilize the available collection system to ensure WEEE is properly treated. For information about the available collection system, please contact Extreme Environmental Compliance at Green@extremenetworks.com. Supplement to Product Instructions Other Countries Brazil Este produto est homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resoluo n. 242/2000 e atende aos requisitos tcnicos aplicados. Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar interferncia em sistemas devidamente autorizados. Para maiores informaes, consulte o site da ANATEL www.anatel.gov.br Mexico Compliance Statement La operacion de este equipo esta sujeta a las siguientes dos condiciones 1 2 es posible que este equipo o dispositivo no cause interferencia perjudicial y este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacion no deseada. The operation of this equipment is subject to the following two conditions:
1 2 It is possible that this equipment or device does not cause disruptive interference and This equipment or device must accept any interference, including interference that may cause undesired operation. UK Statement and CE Statement This equipment complies with the UK and EEA radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. The frequency and the maximum transmitted power in the UK and European Conformity are listed below:
CE UK 2400-2483.5 MHz: 19.98 dBm 2400-2483.5 MHz: 19.98 dBm 2400-2483.5 MHz(802.15.4): 8.03 dBm 2400-2483.5 MHz(802.15.4): 8.03 dBm 2400-2483.5 MHz (BLE): 8.0 dBm 2400-2483.5 MHz (BLE): 8.0 dBm 5150-5725 MHz: 29.96 dBm 5150-5725 MHz: 29.96 dBm 5725-5850MHz: 13.97 MHz 5720-5850 MHz: 29.97 dBm 5945-6425 MHz: 22.99 dBm 5945-6425 MHz: 22.99 dBm CE - The device is restricted to indoor use only when operating in the 5945 to 6425 MHz frequency range. UK - The device is restricted to indoor use only when operating in the 5945 to 6425 MHz frequency range. Hereby, Extreme Networks declares that the radio equipment AP3000X-WW is in compliance with Radio Equipment Regulations 2017. Operation on oil platforms, cars, trains, boats, and aircraft shall be prohibited except for on large aircraft flying above 10,000 ft. For full text of the UK Declaration of Conformity, please contact Extreme Regulatory Compliance at compliancerequest@extremenetworks.com. Extreme Networks UK Address Extreme Networks, UK Ltd. 250 Longwater Avenue Green Park 1st Floor Reading, UK Extreme Networks EU Importer Address Extreme Networks, Ireland Ops Ltd. Rineanna House Shannon Industrial Estate Shannon, V14CA36 Ireland Industry Canada Notice This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada's license-exempt RSS(s). Operation in the band 5925 to7125 MHz is subject to the following two conditions: (1) IC regulations restrict the operation of this device to indoor use only, and (2) the operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Cet appareil contient un ou des metteurs/rcepteurs exempts de licence conformes aux RSS exempts de licence d'Innovation, Sciences et Dveloppement conomique Canada. Fonctionnement dans la bande 5925 7125 MHz sous rserve des deux conditions suivantes: (1) Les rglementations de la IC limitent le fonctionnement de cet appareil une utilisation en intrieur uniquement, et (2) le fonctionnement de cet appareil est interdit sur les plates-formes ptrolires, les voitures, les trains, les bateaux et les avions, sauf que le fonctionnement de cet appareil est autoris dans de grandes avion en vol au-
dessus de 10 000 pieds. Caution: The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Caution: Avertissement: les dispositifs fonctionnant dans la bande 5150-
5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canadas license-exempt RSS(s). Operation is subject to the following two conditions:
1 2 This device must accept any interference, including interference that may cause This device may not cause interference. undesired operation of the device. Lmetteur/rcepteur exempt de license contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux Caution: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment must be installed and operated with minimum distance 28 cm between the radiator and your body. Caution: Avertissement:Cet quipement est conforme aux limites dexposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 28cm de distance entre la source de rayonnement et votre corps. This radio transmitter [IC ID: 4141B-AP3000] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed below, with the maximum permissible gain indicated. Antenna types not included in this list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Cet metteur radio [IC ID: 4141B-AP3000] a t approuv par Innovation, Sciences et Dveloppement conomique Canada pour fonctionner avec les types d'antenne rpertoris sous, avec le gain maximal autoris indiqu. Les types d'antenne non inclus dans cette liste qui ont un gain suprieur au gain maximum indiqu pour tout type rpertori sont strictement interdits pour une utilisation avec cet appareil. Antenna type/Type d'antenne Frequency range
(GHz)/Gamme de frquences (GHz) Dipole Dipole Dipole Dipole Omni Omni Panel Panel Panel Dipole Dipole PIFA 2.4/5 2.4/5 2.4/5 2.4/5 2.4/5 2.4/5 2.4/5 2.4/5 2.4/5 6 6 2.4 Antenna gain (dBi)/
Gain d'antenne
(dBi) 3.04/4.96 3.04/4.96 3.23/5.22 3.23/5.22 5/8 5/8 7.5/7.5 2.97/4.94 2.94/4.62 5.49 5.49 4.02 Impedance (Ohm)/Impdance
(Ohm) 50 50 50 50 50 50 50 50 50 50 50 50 This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 28 cm between the radiator and your body. Cet quipement est conforme aux limites d'exposition aux rayonnements IC RSS-102 tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 28 cm entre le radiateur et votre corps. Taiwan Regulatory Statement Taiwan Maximum Permissible Exposure (MPE) Warning European Waste Electrical and Electronic Equipment
(WEEE) Notice In accordance with Directive 2012/19/EU of the European Parliament on waste electrical and electronic equipment (WEEE):
1 The symbol above indicates that separate collection of electrical and electronic equipment is required. 2 When this product has reached the end of its serviceable life, it cannot be disposed of as 3 unsorted municipal waste. It must be collected and treated separately. It has been determined by the European Parliament that there are potential negative effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment. Declaration of Conformity in Languages of the European Community English Finnish Dutch French Swedish Danish German Greek Icelandic Italian Spanish Hereby, Extreme Networks, declares that the radio equipment type (AP3000X-
WW) is in compliance with Directive 2014/53/EU. For full text of the EU Declaration of Conformity, please contact Extreme Regulatory Compliance at compliancerequest@extremenetworks.com Tten Extreme Networks vakuuttaa, ett Radio laite tyyppi (AP3000X-WW) on direktiivin 2014/53/EU mukainen.EU vaatimustenmukaisuusvakuutuksen tydellisest tekstist ota yhteytt rimmisiin viranomais sdksiin osoitteessa compliancerequest@extremenetworks.com Extreme Networks verklaart hierbij dat het type radioapparatuur (AP3000X-
WW) in overeenstemming is met richtlijn 2014/53/EU.Voor de volledige tekst van de EU-conformiteitsverklaring u contact opnemen met extreme regelgeving op compliancerequest@extremenetworks.com Par la prsente, Extreme Networks dclare que le type d'quipement radio
(AP3000X-WW) est conforme la directive 2014/53/UE.Pour le texte intgral de la Dclaration de conformit de l'UE, veuillez communiquer avec Extreme Regulatory Compliance compliancerequest@extremenetworks.com Hrmed intygar Extreme Networks att radioutrustning typ (AP3000X-WW) verensstmmer med direktiv 2014/53/EU.Fr fullstndig text av EU-frskran om verensstmmelse, vnligen kontakta Extreme regelefterlevnad p compliancerequest@extremenetworks.com Herved erklrer Extreme Networks, at radioudstyrs typen (AP3000X-WW) er i overensstemmelse med direktiv 2014/53/EU.For den fulde ordlyd af EU-
overensstemmelseserklringen bedes du kontakte Extreme Regulatory Compliance p compliancerequest@extremenetworks.com Dabei erklrt Extreme Networks, dass der Funkgertetyp (AP3000X-WW) mit der Richtlinie 2014/53/EU im Einklang steht.Fr den vollstndigen Wortlaut der EU-Konformittserklrung wenden Sie sich bitte an extreme Regulatory Compliance unter compliancerequest@extremenetworks.com
(AP3000X-WW) 2014/53/.
, compliancerequest@extremenetworks.com Hrlendis, Extreme Networks, lsa v yfir a tvarpsbnaargerin (AP3000X-
WW) s samrmi vi tilskipun 2014/53/ESB.Fyrir fullan texta ESB yfirlsingu um samrmi, vinsamlegast hafu samband vi Extreme Reglufylgni compliancerequest@extremenetworks.com Di conseguenza, Extreme Networks dichiara che il tipo di apparecchiature radio
(AP3000X-WW) conforme alla direttiva 2014/53/EU.Per il testo integrale della Dichiarazione di conformit dell'UE, contattare Extreme Regulatory Compliance presso compliancerequest@extremenetworks.com Por la presente, Extreme Networks declara que el tipo de equipo radioelctrico
(AP3000X-WW) cumple con la Directiva 2014/53/UE.Para obtener el texto completo de la Declaracin de conformidad de la UE, pngase en contacto con Extreme Regulatory Compliance en compliancerequest@extremenetworks.com Portuguese Por este meio, a Extreme Networks declara que o tipo de equipamento de rdio
(AP3000X-WW) est em conformidade com a Diretiva 2014/53/UE.Para obter o texto integral da Declarao de Conformidade da UE, contacte o cumprimento regulamentar extremo em compliancerequest@extremenetworks.com Malti B ' dan, netwerks estremi, jiddikjara li t-tip ta ' tagmir tar-radju (AP3000X-
WW) huwa konformi mad-Direttiva 2014/53/UE.Gat-test si tad-dikjarazzjoni ta ' konformit tal-UE, jekk jogbok ikkuntattja lill-konformit regolatorja compliancerequest@extremenetworks.com ExtremeWirelessTM Indoor Access Point Quick Reference AP3000X Copyright 2022 Extreme Networks, Inc. All Rights Reserved. Notice Legal Notices Extreme Networks, Inc. reserves the right to make changes in specifications and other information contained in this document and its website without prior notice. The reader should in all cases consult representatives of Extreme Networks to determine whether any such changes have been made. The hardware, firmware, software or any specifications described or referred to in this document are subject to change without notice. Trademarks Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc. in the United States and/or other countries. All other names (including any product names) mentioned in this document are the property of their respective owners and may be trademarks or registered trademarks of their respective companies/owners. For additional information on Extreme Networks trademarks, please see:
www.extremenetworks.com/company/legal/trademarks/
Documentation, Installation Videos, and Support For product support, including Documentation and Installation Videos, visit:
www.extremenetworks.com/documentation P/N 9037548-01 Rev AA