WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5937475.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Lock the Access Point after Installation Secure the access point by using the Kensington lock on the side of the access point. The security feature is used to prevent the access point from being removed from the mounting accessory. Antenna Information The access points have internal antennas. 4 Dual-band 2.4G/5G antenna 4 6G band antenna 2 Dual 5G/6G antenna 1 BLE antenna 1 UWB antenna (for AP5010U only) Professional Installation Instruction Installation personnel This product is designed for specific application and needs to be installed by a qualified personnel who has RF and related rule knowledge. The general user shall not attempt to install or change the setting. Installation procedure Refer to the ExtremeWireless AP5010 Access Point Installation Guide. Warning: Select the installation position and ensure that the final output power does not exceed the limit set forth in relevant rules. The violation of the rule could lead to serious federal penalty. Instructions d'installation professionnelle Installation Ce produit est destine a un usage specifique et doit etre installe par un personnel qualifie maitrisant les radiofrequences et les regles s'y rapportant. L'installation et les reglages ne doivent pas etre modifies par l'utilisateur final. Procedure d'installation Consulter le manuel d'utilisation ExtremeWireless AP5010 Access Point Installation Guide. Warning: Avertissement: Choisir avec soin la position d'installation et s'assurer que la puissance de sortie ne depasse pas les limites en vigueur. La violation de cette regle peut conduire a de serieuses penalites federales. 7 Attach the Cat6 RJ45 cable to the ETH0 or ETH1 port. 8 Replace the ceiling tiles. Install the Access Point on a Non-Standard Ceiling Grid or a Wall For detailed non-standard ceiling grid installation or wall installation instructions, refer to the 802.11ax and Cloud Access Points Accessories Guide. The access point can be installed on a non-standard ceiling grid using the following accessories:
Table 4 Non-standard ceiling grid and wall accessories information Bracket part number Description Mounting bracket for Prelude ceilings (15/16 in. ceiling grid), Suprafine ceilings (9/16 in. ceiling grid), and walls JoghExtremeWireless 802.11ax AP5010 and AP5010U Indoor Access Points AP5010 and AP5010U Overview The AP5010 and AP5010U access points are high-performance 802.11ax Wi-Fi 6E, 6 GHz, 5 GHz band, and 2.4 GHz band access points designed for high-density indoor environments. The access points support IEEE 802.11ax Orthogonal Frequency-Division Multiple Access (OFDMA) multi-user access. The access point can be installed on an indoor environment such as a ceiling rail, on non-
standard ceilings, and on a wall. The AP5010 and AP5010U access points have the following features:
One multicolor LED status light For LED activity description, see Status LED Activity Description One light sensor located at the top of the device Two Ethernet ports - Eth0 and Eth1 Ethernet ports (Eth0 and Eth1) automatically negotiate full-duplex connections with the connecting device. Eth0 is 5/2.5/1GE/100 with Power over Ethernet (PoE) Eth1 is 2.5/1GE/100 with PoE power sourcing equipment (PSE) These ports are auto-sensing and adjust to straight-through and crossover standard Cat6 or better Ethernet cables automatically. The access point receives power through an Ethernet connection to the ETH0 port from PSE that is compatible with the 802.3bt and 802.3at standards. One USB port Use the USB port to connect USB-based beacons such as iBeacon and Internet of Things (IoT) devices. Remove the protective cover to access the USB port. One micro USB console port One reset button One Kensington lock The best practice is to use Kensington locks for locking the device. Temperature:
Operating temperature: 0 C to +50 C (+32 F to +122 F) Storage temperature: -40 C to +70 C (-40 F to +158 F) Relative humidity: 0% to 95% non-condensing Power Specifications Ultra-wideband (UWB) support on AP5010U IEEE 802.3bt PoE Power Power Options Power Draw:
Typical: 21.0 W; Max: 25.5 W 802.3bt PoE capable Gigabit Ethernet port For detailed device and radio specifications, refer to the AP5010 Data Sheet. Figure 1 AP5010 and AP5010U access points hardware components Table 1 AP5010 access point hardware ports Callout Description 1 2 3 4 5 6 Eth0/PoE+
ETH1 12V DC USB port Console Security Kensington lock Status LED Activity Description The AP5010 and AP5010U access points have one status light on top of the chassis. The status light conveys operational states for system power, firmware updates, Ethernet and wireless interface activity, and major alarms. Dark: Power is off. Solid white: The device power is on and the access point is ready to use. The device has successfully established a Control And Provisioning of Wireless Access Points
(CAPWAP) connection to ExtremeCloud IQ and is operating normally. Slow-blinking white: The device has a CAPWAP connection to ExtremeCloud IQ, but is operating on 802.3at power instead of 802.3bt power. Solid amber: The device power is on and the access point is in boot up mode, or is running without a CAPWAP connection. Slow-blinking amber: The device has no CAPWAP connection to ExtremeCloud IQ, and is operating on 802.3at power instead of 802.3bt power. Fast-blinking amber: The device is updating its IQ Engine firmware. Micro USB Console Port Through the console port, you can make a serial connection between your management system and the access point. Note: When you connect to the device using the micro USB Console port, the management station from which you connect to the device must have a VT100 emulation program, such as Tera Term Pro (a free terminal emulator) or Hilgraeve HyperTerminal (provided with Windows operating systems from XP forward). AP5010 and AP5010U Box Contents Ensure that the following items are available:
Table 2 Contents of the AP5010 Box Quantity Item 1 1 1 An AP5010 or AP5010U access point Mounting bracket for prelude T-bar ceiling installation (part number AH-
ACC-BKT-AX-TB) Quick Reference Guide All optional brackets and accessories are sold separately. For detailed installation instructions about all mounting procedures, refer to the ExtremeWireless AP5010 Access Point Installation Guide and the 802.11ax and Cloud Access Points Accessories Guide in the Extreme Networks Documentation Support site. Position the Access Point before Installation There is a red dot on the back of the access point and the bracket that will work as a guide to position the access point for installation. Line up the red dot on the access point and the bracket for ease of installation. Install the Access Point Electrical Hazard: Only qualified personnel must perform installation procedures. Use these instructions as guidelines for mounting and connecting the AP5010 or the AP5010U access point easily and safely. Install the Access Point on a Standard Ceiling Rail The AP5010 and AP5010U access points ship with a mounting bracket for standard 15/16 in. dropped ceiling grid. For non-standard ceiling rail installations, see Install the Access Point on a Non-Standard Ceiling Grid or a Wall . Remove the ceiling tiles. 1 2 Align the accessory on the ceiling rail in such a way that the accessory metal hinges are almost parallel to the sides of the ceiling rail. 3 Rotate the accessory clockwise until the metal hinges hook over the edge of the rail and the white tabs click in place. Note: There are two white tabs in the back of the accessory that holds on to the ceiling rail in place. Use your finger to push and unhook one side of the white tab if you want to remove the accessory from the ceiling rail. AH-ACC-BKT-AX-TB AH-ACC-BKT-AX-IL Figure 2 AH-ACC-BKT-AX-TB bracket AH-ACC-BKT-AX-SL Table 3 AH-ACC-BKT-AX-TB bracket parts description Callout Description 1 2 3 Metal hinges on the AH-ACC-BKT-AX-TB bracket Mounting holes for wall mounting White tab on the AH-ACC-BKT-AX-TB bracket 4 Attach the Ethernet port cap to the access point Ethernet port. For more information about Ethernet cap, refer to Ethernet Cap Accessory Information on the 802.11ax and Cloud Access Points Accessories Guide. 5 Align the red dot on the back of the access point against the bracket red dot. Note: The accessory has a circular tip that fits into the circular depression on the back of the access point. 6 Press and rotate the access point 1/8th turn clockwise until it clicks into place on the accessory. Figure 3 AP5010 or AP5010U access point ceiling install ACC-BKT-AX-JB ACC-BKT-AX-BEAM AH-ACC-BKT-AX-WL Mounting bracket for Interlude (9/16 wide T-bar with protrusion) ceilings Mounting bracket for Silhouette ceilings (ceiling grid with 1/8 in. or 1/4 in. bottom opening) Junction box or wall mounting for indoor access points Beam mounting for indoor access points Mounting bracket for direct-to-wall installations Note: The default bracket for wall installation is the ACC-BKT-AX-JB bracket. Order the -JB bracket for new wall installations. The AH-ACC-BKT-AX-WL bracket is for users who already have the -WL brackets. Regulatory and Compliance Information Safety Guidelines This section contains notices that are intended to protect your personal safety and to prevent damage to the equipment. Qualified Personnel:
Electrical Hazard: Only qualified personnel must perform installation procedures. Within the context of the safety notes in this documentation, qualified persons are defined as persons who are authorized to commission grounding devices, systems, and circuits in accordance with established safety practices and standards. A qualified person understands the requirements and risks involved with installing outdoor electrical equipment in accordance with national codes. Federal Communication Commission Interference Statement FCC regulations restrict the operation of this device to indoor use only. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna Increase the separation between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio or TV technician for help Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate this equipment. This device is restricted for indoor use. This equipment may only be operated indoors. Operation outdoors is in violation of 47 U.S.C. 301 and could subject the operator to serious legal penalties. The operation of this device is prohibited on oil platforms, cars, trains, boats, and aircraft, except that operation of this device is permitted in large aircraft while flying above 10,000 feet. Operation of transmitters in the 5.925-7.125 GHz band is prohibited for control of or Communications with unmanned aircraft systems. Warning: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 43 cm for AP5010 and 44 cm for AP5010U between the radiator and your body. For Japan, AP5010 access point is restricted for indoor use in the 5150-5350 MHz band only. Japan Indoor Use Statement Japan Voluntary Control Council for Interference (VCCI) -
Class B European Union (EU) Radiation Warning Statement Warning: This equipment complies with EU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. Selling Countries:
AT EE IT PT BE FI LV RO BG FR LT SK HR DE LU SI CY EL MT ES CZ HU NL SE DK IE PL UK(NI) Restrictions or requirements in the UK Other Countries Brazil Este produto est homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resoluo n. 242/2000 e atende aos requisitos tcnicos aplicados. Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar inter-
ferncia em sistemas devidamente autorizados. Para maiores informaes, consulte o site da ANATEL www.anatel.gov.br Brazil 6E Statement O uso deste equipamento restrito a ambientes fechados e proibido em plataformas petrolferas, carros, trens, embarcaes e no interior de aeronaves abaixo de 3.048 m (10.000 ps). Mexico Compliance Statement La operacion de este equipo esta sujeta a las siguientes dos condiciones 1 2 es posible que este equipo o dispositivo no cause interferencia perjudicial y este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacion no deseada. The operation of this equipment is subject to the following two conditions:
1 2 It is possible that this equipment or device does not cause disruptive interference and This equipment or device must accept any interference, including interference that may cause undesired operation. UK Statement and CE Statement This equipment complies with the UK and EEA radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. The frequency and the maximum transmitted power in the UK and European Conformity are listed below:
AP5010 CE AP5010 UK 2402-2480MHz (LE): 7.99 dBm 2405-2480MHz: 8.03 dBm 2412-2472MHz: 19.99 dBm 5180-5240MHz: 22.99 dBm 5260-5320MHz: 22.99 dBm 5500-5700MHz: 29.97 dBm 5955-6415MHz: 22.99 dBm 2402-2480MHz (LE): 7.99 dBm 2405-2480MHz: 8.03 dBm 2412-2472MHz: 19.99 dBm 5180-5240MHz: 22.99 dBm 5260-5320MHz: 22.99 dBm 5500-5700MHz: 29.97 dBm 5745-5825 MHz: 22.98 dBm 5955-6415MHz: 22.99 dBm AP5010U CE AP5010U UK 2402-2480MHz (LE): 7.99 dBm 2405-2480MHz: 8.03 dBm 2412-2472MHz: 19.99 dBm 5180-5240MHz: 22.99 dBm 5260-5320MHz: 22.99 dBm 5500-5700MHz: 29.99 dBm 5955-6415MHz: 22.99 dBm 6489.6-7987.2MHz: -6.39 dBm/RBW (for AP5010U only) 2402-2480MHz (LE): 7.99 dBm 2405-2480MHz: 8.03 dBm 2412-2472MHz: 19.99 dBm 5180-5240MHz: 22.99 dBm 5260-5320MHz: 22.99 dBm 5500-5700MHz: 29.99 dBm 5745-5825 MHz: 22.98 dBm 5955-6415MHz: 22.99 dBm 6489.6-7987.2MHz: -6.39 dBm/RBW (for AP5010U only) Warning: The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. CE - The device is restricted to indoor use only when operating in the 5945 to 6425 MHz frequency range. UK - The device is restricted to indoor use only when operating in the 5925 to 6425 MHz frequency range. Hereby, Extreme Networks declares that the radio equipment AP5010, AP5010U is in compliance with Radio Equipment Regulations 2017. For more details, contact Extreme Compliance Request at ComplianceRequest@extremenetworks.com. Extreme Networks UK Address Extreme Networks, UK Ltd. 250 Longwater Avenue Green Park 1st Floor Reading, UK Extreme Networks EU Importer Address Extreme Networks, Ireland Ops Ltd. Rineanna House Shannon Industrial Estate Shannon, V14CA36 Ireland Industry Canada Notice Warning: For indoor use only. Pour une utilisation en intrieur uniquement. Operation on oil platforms, cars, trains, boats, and aircraft are prohibited except for on large aircraft flying above 10,000 ft. L'exploitation sur les plates-formes ptrolires, les voitures, les trains, les bateaux et les aronefs est interdite, sauf sur les gros aronefs volant au-dessus de 10,000 pieds. This device complies with ISEDs licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d ISED applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Warning: IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 40 cm between the radiator and your body. Warning: Cet quipement est conforme aux limites d'exposition aux rayonnements IC RSS-
102 tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec une distance minimale de 40 cm entre le radiateur et votre corps. Caution: The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Caution: Avertissement: les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-
located or operating in conjunction with any other antenna or transmitter. Taiwan Regulatory Statement Hazardous Substances This product complies with the requirements of Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. European Waste Electrical and Electronic Equipment
(WEEE) Notice In accordance with Directive 2012/19/EU of the European Parliament on waste electrical and electronic equipment (WEEE):
1 The symbol above indicates that separate collection of electrical and electronic equipment is required. 2 When this product has reached the end of its serviceable life, it cannot be disposed of as unsorted 3 4 municipal waste. It must be collected and treated separately. It has been determined by the European Parliament that there are potential negative effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment. It is the users responsibility to utilize the available collection system to ensure WEEE is properly treated. For information about the available collection system, please contact Extreme Environmental Compliance at Green@extremenetworks.com. Supplement to Product Instructions Declaration of Conformity in Languages of the European Community English Finnish Dutch French Swedish Danish German Greek Icelandic Italian Spanish Hereby, Extreme Networks declares that the radio equipment type (AP5010, AP5010U) is in compliance with Directive 2014/53/EU. For full text of the EU Declaration of Conformity, please contact Extreme Regulatory Compliance at compliancerequest@extremenetworks.com Tten Extreme Networks vakuuttaa, ett Radio laite tyyppi (AP5010, AP5010U) on direktiivin 2014/53/EU mukainen.EU vaatimustenmukaisuusvakuutuksen tydellisest tekstist ota yhteytt rimmisiin viranomais sdksiin osoitteessa compliancerequest@extremenetworks.com Extreme Networks verklaart hierbij dat het type radioapparatuur (AP5010, AP5010U) in overeenstemming is met richtlijn 2014/53/EU.Voor de volledige tekst van de EU-
conformiteitsverklaring u contact opnemen met extreme regelgeving op compliancerequest@extremenetworks.com Par la prsente, Extreme Networks dclare que le type d'quipement radio (AP5010, AP5010U) est conforme la directive 2014/53/UE.Pour le texte intgral de la Dclaration de conformit de l'UE, veuillez communiquer avec Extreme Regulatory Compliance compliancerequest@extremenetworks.com Hrmed intygar Extreme Networks att radioutrustning typ (AP5010, AP5010U) verensstmmer med direktiv 2014/53/EU.Fr fullstndig text av EU-frskran om verensstmmelse, vnligen kontakta Extreme regelefterlevnad p compliancerequest@extremenetworks.com Herved erklrer Extreme Networks, at radioudstyrs typen (AP5010, AP5010U) er i overensstemmelse med direktiv 2014/53/EU.For den fulde ordlyd af EU-
overensstemmelseserklringen bedes du kontakte Extreme Regulatory Compliance p compliancerequest@extremenetworks.com Dabei erklrt Extreme Networks, dass der Funkgertetyp (AP5010, AP5010U) mit der Richtlinie 2014/53/EU im Einklang steht.Fr den vollstndigen Wortlaut der EU-
Konformittserklrung wenden Sie sich bitte an extreme Regulatory Compliance unter compliancerequest@extremenetworks.com
(AP5010, AP5010U) 2014/53/.
, compliancerequest@extremenetworks.com Hrlendis, Extreme Networks, lsa v yfir a tvarpsbnaargerin (AP5010, AP5010U) s samrmi vi tilskipun 2014/53/ESB.Fyrir fullan texta ESB yfirlsingu um samrmi, vinsamlegast hafu samband vi Extreme Reglufylgni compliancerequest@extremenetworks.com Di conseguenza, Extreme Networks dichiara che il tipo di apparecchiature radio
(AP5010, AP5010U) conforme alla direttiva 2014/53/EU.Per il testo integrale della Dichiarazione di conformit dell'UE, contattare Extreme Regulatory Compliance presso compliancerequest@extremenetworks.com Por la presente, Extreme Networks declara que el tipo de equipo radioelctrico
(AP5010, AP5010U) cumple con la Directiva 2014/53/UE.Para obtener el texto completo de la Declaracin de conformidad de la UE, pngase en contacto con Extreme Regulatory Compliance en compliancerequest@extremenetworks.com Portuguese Por este meio, a Extreme Networks declara que o tipo de equipamento de rdio
(AP5010, AP5010U) est em conformidade com a Diretiva 2014/53/UE.Para obter o texto integral da Declarao de Conformidade da UE, contacte o cumprimento regulamentar extremo em compliancerequest@extremenetworks.com Taiwan Maximum Permissible Exposure (MPE) Warning Malti B ' dan, netwerks estremi, jiddikjara li t-tip ta ' tagmir tar-radju (AP5010, AP5010U) huwa konformi mad-Direttiva 2014/53/UE.Gat-test si tad-dikjarazzjoni ta '
konformit tal-UE, jekk jogbok ikkuntattja lill-konformit regolatorja compliancerequest@extremenetworks.com ExtremeWirelessTM Indoor Access Points Quick Reference AP5010 AP5010U Scan to Download the XIQ Mobile Application Commission, monitor, and troubleshoot devices at ease with XIQ Companion mobile application (supported on iOS and Android). Use your mobile device camera to scan the serial number, capture installation images, assign or change device location, and network policy. The XIQ Companion mobile application enables you to access the device CLI for troubleshooting and view device and client status. XIQ iOS Mobile App XIQ Android Mobile App Scan for Product Support Details XIQ Onboarding Documentation Product Videos Copyright 2022 Extreme Networks, Inc. All Rights Reserved. Notice Legal Notices Extreme Networks, Inc. reserves the right to make changes in specifications and other information contained in this document and its website without prior notice. The reader should in all cases consult representatives of Extreme Networks to determine whether any such changes have been made. The hardware, firmware, software or any specifications described or referred to in this document are subject to change without notice. Trademarks Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc. in the United States and/or other countries. All other names (including any product names) mentioned in this document are the property of their respective owners and may be trademarks or registered trademarks of their respective companies/owners. For additional information on Extreme Networks trademarks, please see:
www.extremenetworks.com/company/legal/trademarks/
Documentation, Installation Videos, and Support For product support, including Documentation and Installation Videos, visit:
www.extremenetworks.com/documentation P/N 9037185-02 Rev AA