Extreme Networks www.extremenetworks.com Digital Broadcasting Device
(iBeacon/Eddystone) Model: BLE-4 Model:
Part #
36505 LBS-BLE-4AU Bluetooth beacon - 4 alkaline batteries - not provisioned Description 36506 LBS-BLE-4AP 36507 LBS-BLE-4LU 36508 LBS-BLE-4LP 36515 LBS-BLE-4AU-8 Bluetooth beacon - 4 alkaline batteries - fully provisioned Bluetooth beacon - 4 lithium batteries - not provisioned Bluetooth beacon - 4 lithium batteries - fully provisioned Bluetooth beacon - 4 alkaline batteries - not provisioned (8-Pack) 36516 LBS-BLE-4AP-8 Bluetooth beacon - 4 alkaline batteries - fully provisioned 36517 LBS-BLE-4LU-8 Bluetooth beacon - 4 lithium batteries - not provisioned 36518 LBS-BLE-4LP-8 Bluetooth beacon - 4 lithium batteries - fully provisioned 1 Extreme Networks www.extremenetworks.com The MaxBeacon BLE-4 is a new generation super-long range and waterproof beacon that loaded Bluetooth4.0 hardware platform and MiniBeacon intelligence software. MaxBeacon BLE-4 advertises standard iBeacon. The user can configure MaxBeacon via configuration app BeaconSET as well. The enhanced MaxBeacon has 10800mAh battery capacity and advertises data up to 200 meters in open space, it can works at the range of temperature -40 to 70. FEATURE
- Advertise iBeacon & Eddystone simultaneously
- Unique MAC address (ITU)
- Bluetooth 4.0 chipset nRF51 series
- IP66 Waterproof
- 5 years battery lifetime with default setting
- Replaceable AA battery (default:alkaline)
- The max. 200 meters advertisingdistance
- Operation temperature -40 to 70 APPLICATION
- Asset tracking
- Indoor location
- Activity monitoring
- Inventory tracking CONFIGURATION TOOL
- BeaconSET+ (IOS & Android);
ACTIVATE MaxBeacon
- Pressing the On/Off push button and keep holding on 3 seconds;
- The MaxBeacon has been activated after LED lighted on 3 seconds then off;
CERTIFICATION
- iBeacon MFi License (iBC-14-00582)
- FCC Regulation (FCC Part 15.)
- CE Regulations (Included EN300328/301489/60950/62479) 2 Extreme Networks ELECTRONIC PARAMETER Item Case Color Battery Model Operation Voltage Transmission Power Transmission Circuit Transmission Range Antenna Accessories Net Weight Size Value white, black 3.0V 3.6V 1.8-3.9V
-30 to +4dBm 5.3mA (Max.) 110mA (Max.) 200 meters 50ohm Double adhesive 109.0g 72 x 72 x23 mm www.extremenetworks.com Remarks Other colors can be customized 4pcs 1.5V Alkaline battery, total 4400mAh 4pcs 3.6V Li-SOCI2 battery, total 10800mAh DC Tx power Tested @ 0dBm Tx power, standard version Tested @ 4dBm Tx power, enhanced version Tested @ 4dBm Tx power, standard version On board / PCB Antenna 1pc, high-strength, 3M brand;
With battery Null PARAMETER SETTING Each MaxBeacon BLE -4 has been pre-configured in the factory before the shipment. Here below is given the main parameters and default settings. 3 Extreme Networks PACKING INFORMATION www.extremenetworks.com Details Quantity Net Weight Gross Weight Size Image 2 Package Box 8pcs per package box 0.87kg 0.95Kg Carton 80pcs per carton 8.7Kg 10.5Kg 30.5 x 11 x 7.5 cm 32 x 23 x 40 cm Firmware Flash 1. J-LINK Programmer Kit;
2. Programming ports definition;
DECLARATION The contents of this datasheet are subject to change without prior notice for further improvement. Minew team reserves the right to explain all the terms of this datasheet.
<END>
4 FCC WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum 20cm distance between the radiator your body: Use only the supplied antenna. IC Caution:
RSS-Gen Issue 5 March 2015"&"CNR-Gen 5e March 2015:
- English:
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device.
- French:
Le prsentappareilestconf orme aux CNR d' Industrie Canada applicables aux appareils radio exempts de licence. L'exploitationestautorise aux deux conditions suivantes:
(1) l'appareil ne doit pas produire de brouillage, et
(2) l' utilisateur de l'appareildoit accepter tout brouillageradiolectriquesubi, mmesi le brouillageest susceptible d'encompromettre le fonctionnement. Pour rester en conformit avec les lignes directrices pour lexposition aux radiations de la ISED, le dispositif doit tre install et oprationnel une distance minimale de 20cm entre le radiateur et votre corps: uniquement avec lantenne fournie.