AP410C Hardware User Guide Read about and view specifications and compliance information for the AP410C in this topic. Install the AP410C using this topic. The AP410C is a high-performance 802.11ax dual-5G. dual band access point designed for indoor high-density environments. This device supports IEEE 802.11ax Orthogonal Frequency-Division Multiple Access (OFDMA) multi-user access. For regulatory and compliance information, see "Regulatory Compliance Statements". Important! Change the Country Code If your access point is configured for the World Regulatory Domain, it is important to set the country code to the country in which the APwill be deployed to meet regulatory requirements and for optimal wireless operation. To do this, follow these steps:
The country code selection is for World models only and is not available to FCC, CAN, and other country-specific models. Per FCC reg-
ulations, all Wi-Fi products marketed in the United States must be set to U.S. channels only. 1. Power on the AP and allow it to find and connect to ExtremeCloudIQ. Once the APis connected it appears in the table of devices on the Manage > Devices page. 2. Select the check box next to the AP, and then choose Assign Country Code from the Actions drop-down list. In the dialog box, select the appropriate country from the drop-down list, and then click Save. 3. Upload your changes to the device. Safety Guidelines Safety Guidelines The safety information in this section applies to AP410C devices. The following safety icons are used in these guidelines to identify the type of precaution:
AP410C Hardware Guide1AP410C Hardware Guide1 This icon indicates a general caution. Failure to comply with a caution notification can result in damage to equipment. This icon indicates an electrical caution. Failure to comply with an electrical notification can result in serious injury or death, and extensive damage to equipment. This icon indicates a laser caution. Failure to comply with a laser caution can result in serious injury. The following table lists the safety precautions you should follow when installing your AP410C devices. Extreme Networks devices must be installed by a professional installer who is certified to install these types of devices and to ensure that they are properly grounded and meet applicable local and national electrical codes. These devices are intended for indoor use only. Do not install the device in an environment where the operating ambient temperature might exceed the recom-
mended ranges. Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. For products available in the USA/Canada market, for the 2.4 GHz band, only channels 1-11 can be operated. Selec-
tion of other channels is not possible. Changes or modifications made to this device that are not expressly approved by the party responsible for com-
pliance could void the user's authority to operate the equipment. Use only attachments and accessories specified by Extreme Networks. These devices are not intended for use by persons (including children) with reduced physical, sensory, or mental cap-
abilities, or with lack of experience of knowledge unless they are given supervision or instruction concerning use of the devices by a person who is responsible for their safety. Children should be supervised to ensure that they do not play with the devices. Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD damage occurs when elec-
tronic components are improperly handled and can result in complete or intermittent failures. Be sure to follow ESD-pre-
vention procedures when handling electronic components and equipment. During operation, the surfaces of the AP410C can become hot. Use caution when handling. To meet federal radiation exposure requirements, these devices should be installed at a minimum distance of 8" (20 cm) from people or animals. Install the AP You can mount the AP410C on a flat surface or wall, or on the rails of a standard dropped ceiling grid. There is also an accessory mounting bracket that allows you to install the device in Armstrong-style dropped ceilings (ordered separately). The following sections describe how to install your AP410C devices. Shipping Carton Contents The AP410C shipping carton contains the following items:
l AP410C chassis l Mounting bracket l Read Me card Install the APon a Ceiling Track The AP410C ships with a mounting bracket that lets you easily install it on the rail of a standard dropped ceiling grid. The following illustration shows how to attach the bracket to the ceiling rail, and then install the APon the bracket. AP410C Hardware Guide2AP410C Hardware Guide2 Once the bracket is secure, install the AP using the following steps:
1. Align the red dot on the bottom of the AP with the red dot on the bracket. 2. 3. Rotate the APclockwise until it clicks into place on the bracket. Lift the APstraight up and keep the red dots aligned until the bracket is seated in the round depression on the bottom of the device. AP410C Hardware Guide4AP410C Hardware Guide4 Mounting brackets are available for these devices that will allow you to install them on non-standard ceiling tracks. The following accessory brack-
ets are available:
l AH-ACC-BKT-AX-IL: Mounting bracket for Interlude ceilings. l AH-ACC-BKT-AX-SL: Mounting bracket for Silhouette 1/8" and Silhouette 1/4" ceilings. l AH-ACC-BKT-AX-TB: Mounting bracket for Prelude 15/16" and Suprafine 9/16" ceilings. l AH-ACC-BKT-AX-WL: Mounting bracket for direct-to-wall installations. AP410C Hardware Guide5AP410C Hardware Guide5 Mount the APon a Wall Use the holes in the bracket as a template to mark the wall. Drill holes in the wall and attach the bracket to the wall using wall screws and wall anchors if necessary. Attach the APto the bracket in the same manner as shown in the previous section. Lock the AP You can secure the AP using a Kensington lock in the lock slot on the device, or you can use a security bracket and a crosshead screw or a secur-
ity screw. Security brackets and screws can be ordered separately from Extreme Networks (not available in Brazil). Extreme Networks recommends a variety of Kensington locks. For more information, contact your sales representative. Hardware Components You can see the hardware components of the AP410C in the illustration below and read about them in the sections that follow. Component Descriptions Status Light The status light conveys operational states for system power, firmware updates, Ethernet and wireless interface activity, and major alarms. The AP410C has two status lights on the top of the chassis. At setup, this light cycles through the following sequence:
l Solid White: The power is on and the device is operational.. l Solid Amber: The device is on and is booting.. l Blinking Amber: The device is performing a firmware upgrade. l Dark: The power is off. Light Sensor LED The AP410C also has a light sensor on the top of the device. Ethernet Ports Two RJ45 Ethernet ports (Eth0 and Eth1) automatically negotiate half- and full-duplex connections with the connecting device. Eth0 is 100/1000/2500 BASE-T, and Eth1 is 10/100/1000 BASE-T. These ports are autosensing and adjust to straight-through and crossover standard Cat5 or better Ethernet cables automatically. The APreceives power through an Ethernet connection to the ETH1 port from PSE (power sourcing equipment) that is compatible with the 802.3at and 802.3at standards. Micro USB Console Port Use the Console port to make a serial connection between your management system and the AP. When you connect to the device using the Console port, the management station from which you connect to the device must have a VT100 emulation program, such as Tera Term Pro (a free terminal emulator) or Hilgraeve HyperTerminal (provided with Windows operating systems from XP forward). The serial connection settings are: 9600 bits per second, 8 data bits, no parity, 1 stop bit, no flow control. Reset Button Use the Reset button to reset the device or restore the factory default settings. Insert a paper clip or similar tool into the Reset pinhole and press AP410C Hardware Guide6AP410C Hardware Guide6 the button. To reboot the device, press the button for 5 seconds. To return the configuration to the factory default settings, press it for at least 10 seconds. After releasing the button, the indicator light goes dark, and then glows steady amber while the firmware loads and the system per-
forms a self-test. After the software finishes loading and the AP has connected to ExtremeCloudIQ, the status indicator glows steady white. To prevent the reset button from resetting the configuration, enter this command:
no reset-button reset-config-enable When this command is enabled, pressing the button for 5 seconds will still reboot the AP, but pressing it for more than 10 seconds will not reset its configuration. Security Slot The AP410C has a security slot for locking the device. Extreme Networks recommends a variety of Kensington locks. For more information, contact your sales representative. Hardware Specifications The following sections list radio, device, power, and environmental specifications for the AP410C. Radio Specifications l Radio 1: 5 GHx 2x2 band 1 and 2 + 2.4 GHz 2x2 l Radio 2: 2.4 Hz 1x1+ 5 GHz 1x1 (scanner) l Radio 3: 5 GHz 4x4 full band or 5 GHz band 3 and 4 Operating Frequency:
l 2402 - 2483.5 MHz for the 2.4 GHz radio l 5150-5850 MHz for the 5 GHz radio Wi-Fi Channel Support l WiFi 2.4G RX requirement: -96dBm@1Mbps l WiFi 5G RX requirement: -93dBm@6M Bluetooth BLE Beacon (BLE5.0) l 2402 - 2480 MHz l Frequency Hopping Spread-spectrum (FHSS) 802.11a l 5150-5250, 5725-5850 MHz operating frequency l Orthogonal Frequency Division Multiplexing (OFDM) modulation l Rates (Mbps): 54, 48, 36, 24, 12, 9, 6 with auto fallback 802.11b l 2.4-2.48 GHz operating frequency l Direct-Sequence Spread-Spectrum (DSSS) modulation l Rates (Mbps): 11, 5.5, 2.1 with auto fallback 802.11g l 2.4-2.48 GHz operating frequency l Orthogonal Frequency Division Multiplexing (OFDM) modulation l Rates (Mbps): 54, 48, 36, 24, 12, 9, 6 with auto fallback 802.11n l 5 GHz 5150-5250, 5725-5850 MHz operating frequency l 802.11n modulation l Rates: MCS0 - MCS7 l 2x2 MIMO radio l HT20/HT40 support (HT40 is for 5 GHz only) l A-MPDU and A-MSDU frame aggregation AP410C Hardware Guide7AP410C Hardware Guide7 802.11ac l 802.11ac modulation (256-QAM) l 2.4 - 2.48 GHz MCS0-9, NSS=1-2 l 5150-5250, 5725-5850 MHz operating frequency l Rates: MCS0 - MCS9, NSS = 1-2 l 2x2 MIMO radio l VHT20/VHT40/VHT80 support (VT40 and VT80 for 5GHz only) 802.11ax l 5150-5250, 5725-5850 MHz operating frequency l 2.4 - 2.48 GHz operation frequency l 802.11ax modulation (1024-QAM) l Rates: MCS0 - MCS11, NSS = 1-2 l OFDMA support l 2x2 MU-MIMO l HE20/HE40/HE80 support (HE40 and HE80 for 5GHz only) Transmit Power and Sensitivity Specifications Output power may be limited by regulatory requirements. AP410C Hardware Guide8AP410C Hardware Guide8 Power: 2.4 GHz:
Tolerance +2/-2 dB @25C Channel 11b 11g HE20 2.4 G Sensitivity 11b 11g HE20 Data Rate 1,2,5.5,11 54 Mbps 48 Mbps 36 Mbps 6 Mbps MCS 0,1,2 MCS 3 MCS 4, 5 MCS 6,7 MCS 8,9 MCS 10,11 1 Mbps 11 Mbps 6 Mpbs 36 Mpbs 48 Mbps 54 Mbps MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 MCS 10 MCS 11 Power (dBm) 18 15 16 17 18 18 17 16 15 14 12
-99
-90
-96
-84
-80
-78
-95
-91
-89
-86
-83
-79
-77
-76
-72
-70
-67
-64 AP410C Hardware Guide9AP410C Hardware Guide9 AP410C Power: 5 GHz:
Mode 11a HE20 HE40 HE80 Sensitivity 11a 11n HE20 Data Rate 54 Mbps 48 Mbps 36 Mbps 6 Mbps MCS 0, 1, 2 MCS 3, 4 MCS 5, 6 MCS 7, 8 MCS 9 MCS 10 MCS 11 MCS 0, 1, 2 MCS 3, 4, 5 MCS 7, 15, 23 MCS 6, 7, 8 MCS 10 MCS 11 MCS 0,1,2 MCS 3,4,5 MCS 6,7,8 MCS 9 MCS 10 MCS 11 6 Mbps 36 Mbps 48 Mbps 54 Mbps MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 Power (dBm) 17 17 18 19 19 17 16 15 14 13 12 17 16 14 15 13 12 17 16 15 14 13 12
-94
-83
-79
-77
-94
-91
-88
-86
-82
-78
-77
-75
-71
-69 AP410C Hardware Guide10AP410C Hardware Guide10 Mode 11n HE40 HE80 Data Rate Power (dBm) MCS 10 MCS 11 MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 MCS 10 MCS 11 MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 MCS 10 MCS 11
-66
-63
-92
-88
-86
-83
-80
-76
-74
-73
-69
-67
-63
-60
-88
-85
-83
-80
-77
-73
-71
-69
-66
-64
-60
-57 AP410C Hardware Guide11AP410C Hardware Guide11 Tolerance +2/-2 dB @25 C Mode 11a Data Rate 6 Mbps 36 Mbps 48 Mbps 54 Mbps 11n HE20 MCS 0,1, 2, 3, 4, 8, 9, 10, 11 11n HT40 HE80 Sensitivity 11a 11n HE20 MCS 13, 21 MCS 14, 22 MCS 15, 23 MCS 12, 16, 17, 18, 19, 20 MCS 0,1,2, 3, 4, 8 MCS 5, 13, 21 MCS 7, 15, 23 MCS 9, 10, 11, 12, 16 MCS 10 MCS 17, 18, 19, 20 MCS 0,1,2 MCS 3,4,5 MCS 6,7,8 MCS 9 MCS 10 MCS 11 6 Mbps 36 Mbps 48 Mbps 54 Mbps MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 MCS 10 MCS 11 Power (dBm) 19 18 16 15 19 18 16 15 19 19 18 14 19 13 19 17 16 15 14 13 12
-94
-83
-79
-77
-94
-91
-88
-86
-82
-78
-77
-75
-71
-69
-66
-63 AP410C Hardware Guide12AP410C Hardware Guide12 Mode 11n HE40 HE80 Data Rate Power (dBm) MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 MCS 10 MCS 11 MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 MCS 10 MCS 11
-92
-88
-86
-83
-80
-76
-74
-73
-69
-67
-63
-60
-88
-85
-83
-80
-77
-73
-71
-69
-66
-64
-60
-57 Device Specifications l Chassis dimensions: Per hardware spec: 8.07 x 8.07 x 1.46 (205 mm x 205 mm x 37 mm l Weight: 2.61 lbs (1.18 kilograms) approximate weight l Antennas: Four dual band and three 5 GHz single band omnidirectional antennas l Ethernet ports:
l Eth0: autosensing 100/1000G BASE-T/TX Mbps, requiring Cat5 or better cable. l Eth1: autosensing 10/100/1000G BASE-T/TX Mbps, requiring Cat5 or better cable. The APreceives power through an Ethernet connection to the ETH1 port from PSE (power sourcing equipment) that is compatible with the 802.3at and 802.3at standards. l 5.0 BLE Antenna Gain l WiFi 2.4 GHz: 3.9 dBi gain max l WiFi 5 GHz: 4.7 dBi gain max Antenna Plots The antenna plots for the AP410C are available below. The Ethernet port location is noted on each chart. AP410C Hardware Guide13AP410C Hardware Guide13 AP410C AP410C Hardware Guide14AP410C Hardware Guide14 AP410C Hardware Guide15AP410C Hardware Guide15 AP410C Hardware Guide16AP410C Hardware Guide16 AP410C Hardware Guide17AP410C Hardware Guide17 AP410C Hardware Guide18AP410C Hardware Guide18 AP410C Hardware Guide19AP410C Hardware Guide19 Power and Environmental Specifications Power Specifications l PoE input voltage range: 37-57 V l ESD Protection:8 kV contact discharge / 15 kV air discharge Power Consumption l PoE: 26.7W with USB, 5V/1A, 21.7W without USB l 802.3at at Ethernet switch l Surge Protection: 1.0 kV DM, 2 kV CM Environmental Specifications l Operating temperature: 32 to 104 F (0 to 40 C) l Storage temperature: -40 to 176 F (-40 to 80 C) l Relative Humidity: 10 to 95% RH (noncondensing) AP410C Hardware Guide20AP410C Hardware Guide20 Regulatory Compliance Statements The regulatory compliance statements in this section apply to Extreme Networks devices. Japan Indoor Use For Japan, the AP410Cis restricted for indoor use in the 5150-5350 MHz band only. Japan Equipment VCCI-B Statement Compliance Statement - Europe EU Declaration of Conformity View full CE Declaration of Compliance and this information online at www.aerohive.com/support/regulatory-compliance Extreme Networks, Inc. declares that this device complies with the essential requirements of the Radio Eqiupment Directive 2014/53/EU. l Bulgarian []: [Extreme Networks] [Extreme Networks] , [AP410C]
2014/53/U. l Croatian [hrvatski]: [Extreme Networks] ovime izjavljuje da je radijska oprema tipa [AP410C] u skladu s Direktivom 2014/53/EU. l Czech [esky]: [Extreme Networks] Tmto [jmno vrobce] prohlauje, e typ rdiovho zazen [AP410C] je v souladu se smrnic 2014/53/EU. l Danish [Dansk]: Hermed erklrer [Extreme Networks], at radioudstyrstypen [AP410C] er i overensstemmelse med direktiv 2014/53/EU. l Dutch [Nederland]Hierbij verklaar ik, [Extreme Networks], dat het type radioapparatuur [AP410C] conform is met Richtlijn 2014/53/EU. l English: Hereby, [Extreme Networks], declares that this [AP410C] is in compliance with the essential requirements and other relevant pro-
visions of Directive 2014/53/EU. l Estonian [Eesti]: Kesolevaga deklareerib [Extreme Networks], et kesolev raadioseadme tp [AP410C] vastab direktiivi 2014/53/EL nuetele. l Finnish [Suomi]: [Extreme Networks] vakuuttaa, ett radiolaitetyyppi [AP410C] on direktiivin 2014/53/EU mukainen. l French [Franais]: Le soussign, [Extreme Networks], dclare que l'quipement radiolectrique du type [AP410C] est conforme la directive 2014/53/UE. l German [Deutsch]: Hiermit erklrt [Extreme Networks], dass der Funkanlagentyp [AP410C] der Richtlinie 2014/53/EU entspricht. l Greek []: [Extreme Networks] [ [AP410C]
2014/53/EU. l Hungarian [Magyar]: [Extreme Networks] igazolja, hogy a [AP410C] tpus rdiberendezs megfelel a 2014/53/EU irnyelvnek. Italian [Italiano]: Il fabbricante, [Extreme Networks], dichiara che il tipo di apparecchiatura radio [AP410C] conforme alla direttiva 2014/53/UE. Latvian [Latviski]: Ar o [Extreme Networkss] deklar, ka radioiekrta [AP410C] atbilst Direktvai 2014/53/ES. Lithuanian [Lietuvi]: A, [Extreme Networks], patvirtinu, kad radijo rengini tipas [AP410C] atitinka Direktyv 2014/53/ES. l l l l Maltese [Malti]: B'dan, [Extreme Networks], niddikjara li dan it-tip ta' tagmir tar-radju [[[[Undefined variable Primary.AP460C]]]] huwa kon-
formi mad-Direttiva 2014/53/UE. l Polish [Polski]: [Extreme Networks] niniejszym owiadcza, e typ urzdzenia radiowego [AP410C] jest zgodny z dyrektyw 2014/53/UE. l Portuguese [Portugus]: O(a) abaixo assinado(a) [Extreme Networks] declara que o presente tipo de equipamento de rdio [AP410C] est em conformidade com a Diretiva 2014/53/UE. l Romanian [Romania]: Prin prezenta, [Extreme Networks] declar c tipul de echipamente radio [AP410C] este n conformitate cu Directiva 2014/53/UE. l Slovak [Slovensky]: [Extreme Networks] tmto vyhlasuje, e rdiov zariadenie typu [AP410C] je v slade so smernicou 2014/53/E. AP410C Hardware Guide21AP410C Hardware Guide21 l Slovenian [Slovenija]: [Extreme Networks] potrjuje, da je tip radijske opreme [AP410C] skladen z Direktivo 2014/53/EU. l Spanish [Espaol]: Por la presente, [Extreme Networks] declara que el tipo de equipo radioelctrico [AP410C] es conforme con la Directiva 2014/53/UE. l Swedish [Sverige]: Hrmed frskrar [Extreme Networks] att denna typ av radioutrustning [AP410C] verensstmmer med direktiv 2014/53/EU. USA and Canada Radio Frequency Bands a. USA l 802.11b/g/n/ac: 2.4 GHz band: 2400-2483 MHz l 802.11a/n/ac/ax: 5 GHz band: 5150-5250, 5725-5850 MHz l BLE: 2402-2480 MHz b. Canada l 802.11b/g/n/ac: 2.4 GHz band: 2400-2483 MHz l 802.11a/n/ac/ax: 5 GHz band: 5150-5250, 5725-5850 MHz l BLE: 2402-2480 MHz EURadio Frequency and Power Levels This product supports the following radio frequencies and power levels in the EUversion:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Bulgarian []: U:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Croatian [hrvatski]: Ovaj proizvod podrava sljedee radijske frekvencije i razinu snage u verziji EU:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm esky [Czech]: [Tento produkt podporuje nsledujc rdiov frekvence a rovn vkonu ve verzi EU:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Danish [Dansk]: Dette produkt understtter flgende radiofrekvenser og strmniveauer i EU-versionen:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Dutch [Nederland]: Dit product ondersteunt de volgende radiofrequenties en vermogensniveaus in de EU-versie:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm English: This product supports the following radio frequencies and power levels in the EU version:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Estonian [Eesti]: See toode toetab jrgmisi raadiosagedusi ja vimsuse taseme ELis versioon:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm AP410C Hardware Guide22AP410C Hardware Guide22 l BLE: 2402-2480 MHz EIRP<8 dBm Finnish [Suomi]: Tm tuote tukee seuraavia radiotaajuuksia ja tehoja EU-versiossa:
l 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz EIRP<20 dBm l 802.11 a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm French [Franais]: Ce produit prend en charge les frquences radio et les niveaux de puissance suivants dans la version EU:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm German [Deutsch]: Dieses Produkt untersttzt die folgenden Funkfrequenzen und Leistungsstufen in der EU-Version:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Greek [] U:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Hungarian [Magyar]: Ez a termk a kvetkez rdifrekvencikat s teljestmnyszinteket tmogatja az EU verzijban :
l 802.11b/g/n/ac, 2.4 GHz band: 2412-2472 MHz EIRP<20 dBm l 802.11 a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Italian [Italiano]: Questo prodotto supporta le seguenti frequenze radio e livelli di potenza nella versione UE:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Latvian [Latviski]: is produkts atbalsta dus radio frekvences un jaudas lmeni ES versiju:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Lithuanian [Lietuvi]: is produktas palaiko iuos radijo danius ir galios lyg ES versija:
l 802.11b/g/n/ac, 2.4 GHz band: 2412-2472 MHz EIRP<20 dBm l 802.11 a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Maltese [Malti]: Dan il-prodott jappoja l-frekwenzi tar-radju li ejjin u l-livelli ta 'enerija fil-verjoni UE:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Pollish [Polski]: Ten produkt obsuguje nastpujce czstotliwoci radiowe i poziomy mocy w wersji unijnej:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Portuguese [Portugus]: Este produto suporta as seguintes frequncias de rdio e nveis de potncia na verso UE:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax : 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Romanian [Romania]: This product supports the following radio frequencies and power levels in the EU version AP410C Hardware Guide23AP410C Hardware Guide23 l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Slovak [Slovensky]:Tento produkt podporuje nasledujce rdiov frekvencie a rovne napjania vo verzii E:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Slovenian [Slovenija]: Ta izdelek podpira te radijske frekvence in ravni moi v razliici EU:
l 802.11b/g/n/ac, 2.4 GHz band: 2412-2472 MHz EIRP<20 dBm l 802.11 a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Spanish [Espaol]: Este producto admite las siguientes frecuencias de radio y niveles de potencia en la versin de la UE:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Swedish [Sverige]: Denna produkt stder fljande radiofrekvenser och effektniver i EU-versionen:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm UK: This product supports the following radio frequencies and power levels in the EUversion:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483.5 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5725 MHz EIRP<30 dBm, 5730-5850 MHz<23dBm l BLE: 2402-2480 MHz EIRP<8 dBm EURadiation Warning Statement To meet radiation exposure requirements, these devices should be installed at a minimum distance of 8" (20 cm) from people or animals. Restrictions:5150-5350 MHz for indoor use only. Bulgarian []: , 20 .
: 5150-5350 MHz . Croatian [hrvatski]: Da bi zadovoljili zahtjeve izloenosti zraenju, ti ureaji trebaju biti instalirani na minimalnoj udaljenosti od 20 cm od ljudi ili ivot-
inja. Ogranienja: 5150-5350 MHz samo za unutarnju uporabu. Czech [esky]: Aby byly splnny poadavky na ozen, mly by bt tato zazen instalovna v minimln vzdlenosti 20 cm od lid nebo zvat. Omezen: 5150-5350 MHz pouze pro vnitn pouit. Danish [Dansk]: For at opfylde kravene til strlingseksponering skal disse enheder installeres i mindst 8" (20 cm) afstand fra mennesker eller dyr. Restriktioner: 5150-5350 MHz kun til indendrs brug. Dutch [Nederland]: Om aan stralingsblootstelling te voldoen, dienen deze apparaten op een minimumafstand van 8" (20 cm) van mensen of dieren te worden genstalleerd. Beperkingen: 5150-5350 MHz alleen voor gebruik binnenshuis. English: To meet radiation exposure requirements, these devices should be installed at a minimum distance of 8" (20 cm) from people or animals. Restrictions: 5150-5350 MHz for indoor use only. Estonian [Eesti]: Et rahuldada kiirituse nuetele, need seadmed tuleb paigaldada minimaalselt 8" (20 cm) inimestelt vi loomadelt. Piirangud: 5150-5350 MHz sisetingimustele. AP410C Hardware Guide24AP410C Hardware Guide24 Finnish [Suomi]: Steilytysvaatimusten tyttmiseksi nm laitteet on asennettava vhintn 8" (20 cm) etisyydelle ihmisist tai elimist. Rajoitukset: 5150-5350 MHz vain siskyttn. French [Franais]: Pour rpondre aux exigences d'exposition aux rayonnements, ces appareils devraient tre installs une distance minimale de 8" (20 cm) des personnes ou des animaux. Restrictions: 5150-5350 MHz pour usage intrieur seulement. German [Deutsch]: Um die Anforderungen an die Strahlenbelastung zu erfllen, sollten diese Gerte in einem Abstand von 8" (20 cm) von Per-
sonen oder Tieren installiert werden. Einschrnkungen: 5150-5350 MHz nur fr den Innenbereich. Greek []: , 20 cm .
: 5150-5350 MHz . Hungarian [Magyar]: A sugrterhelsi kvetelmnyek teljestse rdekben ezeket az eszkzket legalbb 8" (20 cm) tvolsgra kell felszerelni az emberek vagy az llatoktl. Korltozsok: 5150-5350 MHz csak beltri hasznlatra. Italian [Italiano]: Per soddisfare i requisiti di esposizione alle radiazioni, questi dispositivi devono essere installati ad una distanza minima di 20 cm da persone o animali. Restrizioni: 5150-5350 MHz solo per uso interno. Latvian [Latviski]: Lai apmierintu starojuma iedarbbas prasbm, s ierces ir uzstdtas pie minimlo attlumu 8" (20 cm) no cilvkiem vai dzvniekiem. Ierobeojumi: 5150-5350 MHz izmantot tikai telps. Lithuanian [Lietuvi]: Siekiant patenkinti SPINDULIAVIM reikalavimus, ie taisai turi bti rengiami ne ariau kaip 8" (20 cm) nuo moni ar gyvn. Apribojimai: 5150-5350 MHz naudoti tik patalpose. Maltese [Malti]: Biex jilqu l-tiiet ta 'espoizzjoni tar-radjazzjoni, dawn il-mezzi gandhom jiu installati f'distanza minima ta' 8" (20 m) minn nies jew annimali. Restrizzjonijiet: MHz 5150-5350 gall-uu fuq ewwa biss. Polish [Polski]: Aby speni wymagania dotyczce naraenia na promieniowanie, urzdzenia te powinny by instalowane w odlegoci min-
imum 8" (20 cm) od ludzi lub zwierzt. Ograniczenia: 5150-5350 MHz tylko do uytku wewntrznego. Portuguese [Portugus]: Para atender aos requisitos de exposio radiao, esses dispositivos devem ser instalados a uma distncia mnima de 20 cm (8") de pessoas ou animais. Restries: 5150-5350 MHz para uso interno apenas. Romanian [Romania]: Pentru a ndeplini cerinele de expunere la radiaii, aceste dispozitive ar trebui instalate la o distan minim de 20 cm de la oameni sau animale. Restricii: 5150-5350 MHz numai pentru uz intern. Slovak [Slovensky]: Ak chcete splni poiadavky na vystavenie iareniu, mali by by tieto zariadenia intalovan v minimlnej vzdialenosti od ud alebo zvierat od minimlnej vzdialenosti 20 cm. Obmedzenia: 5150-5350 MHz iba pre vntorn pouitie. Slovenian [Slovenija]: Da bi zadovoljili zahteve izpostavljenosti sevanja, morajo biti te naprave nameene na razdalji najmanj 8" (20 cm) iz ljudi ali ivali. Omejitve: 5150-5350 MHz samo za uporabo v zaprtih prostorih. Spanish [Espaol]: Para cumplir con los requisitos de exposicin a la radiacin, estos dispositivos deben instalarse a una distancia mnima de 8" (20 cm) de personas o animales. Restricciones: 5150-5350 MHz slo para uso en interiores. Swedish [Sverige]: Fr att uppfylla kraven p strlningsexponering br dessa enheter installeras p minst 8" (20 cm) frn mnniskor eller djur. Restriktioner: 5150-5350 MHz endast fr inomhusbruk. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
l Reorient or relocate the antenna of the receiving devices. Increase the separation between this equipment and receiving equipment. l l Connect this equipment into an outlet on a circuit different from that to which the receiving equipment is connected. l Consult the dealer or an experienced radio or TV technician for help. AP410C Hardware Guide25AP410C Hardware Guide25 FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 8" (20 cm) between the radiator and people or animals. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA. Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Brazil Statement Este equipamento no tem direito proteo contra inteferncia prejudicial e no pode causar interferncia em sistemas devidamente autor-
izados. Mexico Statement La operacin de este equipo est sujeta a las siguientes dos condiciones
(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. The operation of this equipment is subject to the following two conditions:
(1) it is possible that this equipment or device does not cause disruptive interference and
(2) this equipment or device must accept any interference, including interference that may cause undesired operation). Industry Canada Statement:
This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions:
This device may not cause interference, and This device must accept any interference, including interference that may cause undesired operation of the device. l l Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
l l l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonc-
tionnement. Caution:
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
Avertissement:
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
Dynamic Frequency Selection (DFS):
Dynamic Frequency Selection (DFS) for devices operating in the bands 5250- 5350 MHz, 5470-5600 MHz and 5650-5725 MHz. Slection dynamique de frquences (DFS):
Slection dynamique de frquences (DFS) pour les dispositifs fonctionnant dans les bandes 5250-5350 MHz, 5470-5600 MHz et 5650-5725 MHz. Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and oper-
ated with minimum distance 20 cm between the radiator and people or animals. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 20 cm de distance entre la source de rayonnement et des personnes ou des animaux. Taiwan Compliance Information Extreme Networks AP410C AP410C Hardware Guide26AP410C Hardware Guide26 5.25-5.35 Taiwan MPE Warning MPE (MPE) 1mW/cm2 0.734 mW/cm2 European Waste Electrical and Electronic Equipment (WEEE) Notice In accordance with Directive 2012/19/EU of the European Parliament on waste electrical and electronic equipment (WEEE):
The symbol above indicates that separate collection of electrical and electronic equipment is required. 1. 2. When this product has reached the end of its serviceable life, it cannot be disposed of as unsorted municipal waste. It must be collected and treated separately. It has been determined by the European Parliament that there are potential negative effects on the environment and human health as a res-
ult of the presence of hazardous substances in electrical and electronic equipment. It is the users responsibility to utilize the available collection system to ensure WEEE is properlytreated. 3. 4. For information about the available collection system, please contact Extreme Environmental Compliance at Green@extremenetworks.com. Hazardous Substances Statement and RoHS Chart Hazardous Substances This product complies with the requirements of Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. Copyright Extreme Networks, Inc. 6480 Via Del Oro, San Jose, CA USA 95119 AP410C Hardware Guide27AP410C Hardware Guide27