ExtremeWireless 802.11ax AP460i/e Outdoor Access Points AP460i/e Overview The AP460i/e access points are outdoor model enterprise class 802.11ax access points. The i in AP460i indicates that the access point comes with internal antennas and the e indicates that it comes with external antenna connectors. The access points feature a dual-band radio, two band-locked radios, eight WiFi internal or external antennas, and one Bluetooth Low Energy (BLE) antenna. The AP460i/e can be mounted on a flat surface such as a wall or to a pole. Note: The AP460i/e requires a minimum base firmware of WiNG 7.3.0. The AP460i/e access points have the following features:
Radios:
Three 802.11ax radios (one 2X2 2.4GHz radio, one 4X4 5GHz radio, and one 2X2 2.4GHz and 5GHz radio) One IoT Radio (2.4 GHz) Console port: RJ45 1 x 100/1000/2500 Mbps auto-negotiation Ethernet port, RJ45 1 x 10/100/1000 Mbps auto-negotiation Ethernet port, RJ45 Two Ethernet ports:
LEDs: 7 All LEDs will be on during reset and connect to general-purpose input/output
(GPIO) pins One reset button Power: PoE 802.3af (see Table 1 for details) Antennas:
Eight WiFi internal/external antennas One BLE internal antenna on AP460i and one BLE external antenna port on AP460e Temperature:
-40 C to +60 C (-40 F to +140 F) Enclosure: Plastic Table 1 AP460i/e Power source Power source Description Power over Ethernet (PoE) Power is provided through the RJ45 Ethernet ports of AP460i/e, compliant to be powered with 802.3at and 802.3bt to provide full functionality. For reduced functionality, use 802.3af. Figure 1 Front views of AP460i and AP460e LED Indicators The LED indicators are located on the front face of the access point but are not visibly marked. Table 2 AP460i/e LED indicators LED indicator LED color Description Status GE1 Ethernet GE2 Ethernet Radio 1 Radio 2 Radio 3 IoT (BLE) Green Amber Amber Green Purple Amber Green Green Amber White Blue Normal operational status Non-operational status 100 Mbps 1000 Mbps 2.5G 100 Mbps 1000 Mbps 2.4G activity 5G activity Sensor activity Indicates BLE is enabled AP460i/e Box Contents Ensure that the following items are available:
Table 3 Contents of the AP460i/e box Quantity Item 1 1 AP460i/e Quick Reference Access point (AP460i or AP460e) Table 3 Contents of the AP460i/e box Quantity Item 1 Hardware bag:
One ground screw One ring terminal One star washer Access Point Mounting Options AP460i/e access points can be mounted on a wall or to a pole by purchasing separate mounting brackets, which are described in the following table. Table 4 AP460i/e Mounting Brackets Usage Mounting Bracket and Part Number Wall Install Pole Install Yes Yes KT-147407-02;
bracket;
comes with three parts:
Flat part 1-axis tilt part Pole part KT-150173-01;
extension arm;
used with KT-147407-02 bracket parts Yes; use the flat wall mount part of the KT-
147407-02 bracket MBO-ART03 Yes Yes; use the pole mount bracket part of the KT-
147407-02 bracket or use all three KT-
147407-02 bracket parts Yes, attach the KT-147407-02 pole part to the MBO-
ART03 Notes For attaching to a wall or a flat surface, use the bracket part that has two holes on the surface of the metal portion; also called the flat part. For attaching to a pole, if the 1-axis tilt is not required, attach the pole part of the bracket to the access point. If 1-axis tilt is required, attach the pole part of the KT-
147407-02 bracket on top of the second wall part. The KT-150173-01 extension arm can also be used by itself without the other KT-147407-02 bracket parts. The articulating mounting bracket is paired with the KT-147407-02 bracket for pole installations. For wall installations, the wall must be strong enough to support the access point during inclement weather. Yes Yes 1-axis +/-15 degree tilt Yes No None KT-147407-02 bracket; comes with three bracket parts 32216 (WS-MBV-
VMM Vehicle Bracket);
comes with four parts All mounting brackets and accessories are sold separately. For detailed installation instructions about all mounting procedures, refer to the ExtremeWireless Access Points AP460i/e Installation Guide in the Extreme Networks Documentation support site. Install the Access Point When you install the access point, the gore vent must be on the side closest to the ground and not above the plastic cover. You must provide a 3-inch drip loop on all cables. Note: The sensor and the BLE antennas come with dust caps on them. Do not remove the dust cap until you need to install the antennas. Electrical Hazard: Only qualified personnel should perform installation procedures. Use these instructions as guidelines to mount and connect the AP460i/e access points easily and safely. Install the Access Point on a Wall or a Flat Surface Option 1: Install the Access Point to a Flat Surface Using the KT-147407-02 Flat Part and the 1-axis Tilt Part The KT-147407-02 bracket has three bracket parts; flat part, 1-axis tilt part, and the pole part. Figure 2 KT-147407-02 bracket flat part and 1-axis tilt part Note: The flat part and the 1-axis tilt part can be used interchangeably to attach to the access point. 1 Attach the flat part to the access point using two M6 screws. 2 Using the 1-axis tilt bracket as a template, mark and drill four holes on a wall or on a flat surface. 3 Attach the 1-axis tilt part to a wall or a flat surface using four M6 head-size screws. 4 Align the KT-147407-02 flat part inside the 1-axis tilt part, and attach the flat part to the 1-axis tilt part using four M6 screws. 5 Tilt the access point to a desired angle and tighten the four M6 screws to a torque of 45 in-lbs. The tilt bracket can be adjusted from +15 degrees to -15 degrees of tilt. Option 2: Install the Access Point to a Flat Surface Using the KT-147407-02 Flat Part, 1-axis tilt-Part, and KT-150173-01 Extension Arm The KT-150173-01 extension arm is used in combination with the KT-147407-02 flat and 1-
axis tilt parts. The KT-150173-01 extension arm can also be used by itself on the access point. 1 Attach the KT-147407-02 flat part to the access point using two M6 screws. 2 Place the KT-147407-02 flat part inside the 1-axis tilt part, and attach it using four M6 screws. 3 Using the KT-150173-01 extension arm as a template, mark and drill four hole centers on a flat surface. The holes must be within the semi-circular cuts of the extension arm. 4 Attach one end of the KT-150173-01 extension arm to the 1-axis tilt part using two hex-
head M12 stainless-steel screws and two hex-head M12 stainless-steel nuts through the two large circular holes on the KT-150173-01 extension arm. 5 Attach the KT-150173-01 extension arm to a flat surface using four M6 hex-head screws and screw-in anchors, if the extension arm is being mounted on a wood surface. If you are mounting the extension arm on a concrete surface, use concrete anchors. The M6 hex-head screws and screw-in anchors must be provided by the installer. Option 3: Install the Access Point to a Flat Surface Using the MBO-ART03 Articulating Mounting Bracket Note: The MBO-ART02 is no longer available. It has been replaced by the MBO-ART03 bracket. 1 Using the short end of the MBO-ART03 articulating mounting bracket as a template, mark and drill four holes on the wall. 2 Attach the end of the MBO-ART03 articulating mounting bracket to the wall using two M6 hex-head screws. 3 Attach the other end of the MBO-ART03 articulating mounting bracket to the access point using two M6 hex-head screws. For installation instructions on how to use the 32216 (WS-MBV-VMM) vehicle mount bracket on a flat surface, refer to the ExtremeWireless Access Points AP460i/e Installation Guide in the Extreme Networks Documentation support site. Install the Access Point to a Pole The access point can be mounted on a pole with or without tilt. Option 1: Install the Access Point to a Pole Using the KT-147407-02 Pole Part 1 Attach the KT-147407-02 pole part to the access point using four M6 screws in the 2 circular slots. Insert 0.5 in. wide stainless-steel cable clamps through the long slots on the pole bracket. 3 Position the cable clamps on the pole part around a pole, and attach the access point to the pole. 4 Insert the ends of the cable clamp around the pole and tighten it to a torque of 11 in-
lbs. Option 2: Install the Access Point to a Pole Using KT-147407-02 Bracket Parts and KT-150173-01 Extension Arm 1 Attach the KT-147407-02 1-axis tilt part to the access point using two M6 screws. 2 Align the KT-147407-02 flat part inside the 1-axis tilt bracket, and attach it using four M6 screws. 3 Tilt the access point to a desired angle and tighten the four M6 screws to a torque of 45 in-lbs. 4 Attach one end of the KT-150173-01 extension arm to the 1-axis tilt part using two hex-
head M12 stainless-steel screws and two hex-head M12 stainless-steel nuts through the two large circular holes on the KT-150173-01 extension arm. 5 Attach the KT-147407-02 pole part to the KT-150173-01 extension arm using two M12 screws and two M12 hex nuts. 6 Insert 0.5 in. wide stainless-steel cable clamps through the long slots of the pole part. 7 Position the cable clamps around a pole, and attach the access point to the pole. 8 Insert the ends of the cable clamp around the pole and tighten it to a torque of 11 in-
lbs. For installation instructions on how to use all the parts of KT-147407-02 bracket, the MBO-ART03 bracket on a KT-147407-02 bracket, refer to the ExtremeWireless Access Points AP460i/e Installation Guide in the Extreme Networks Documentation support site. Professional Installation Instruction Installation personnel This product is designed for specific application and needs to be installed by a qualified person who has RF and related rule knowledge. The general user shall not attempt to install or change the setting. External antenna Use only approved antennas. The non-approved antennas may produce unwanted spurious or excessive RF transmitting power which may lead to the violation of FCC/IC limit and is prohibited. Installation procedure Refer to users manual for installation details. Warning: Carefully select the installation position and make sure that the final output power does not exceed the limit set forth in relevant rules. The violation of the rule could lead to serious federal penalty. Instructions d'installation professionnelle Installation Ce produit est destine a un usage specifique et doit etre installe par un personnel qualifie maitrisant les radiofrequences et les regles s'y rapportant. L'installation et les reglages ne doivent pas etre modifies par l'utilisateur final. Antenn externe Utiliser uniiquement les antennes approuvees par le fabricant. L'utilisation d'autres antennes peut conduire a un niveau de rayonnement essentiel ou non essentiel depassant les niveaux limites definis par FCC/IC, ce qui est interdit. Procedure d'installation Consulter le manuel d'utilisation. Warning: Avertissement: Choisir avec soin la position d'installation et s'assurer que la puissance de sortie ne depasse pas les limites en vigueur. La violation de cette regle peut conduire a de serieuses penalites federales. GE and Console Connections The access points have two GE (Ethernet) ports and a Console port. During administration and maintenance through the Console port, the access points must still have a power connection through an Ethernet PoE cable. Antenna Configurations for External Antenna Model Figure 3 AP460e external antenna connectors Antenna socket radio mapping information Radio 1 (R1) - antennas 5 and 6 Radio 2 (R2) - antennas 1, 2, 3, and 4 Radio 3 (R3) - antennas 7 and 8 Regulatory and Compliance Information Safety Guidelines This section contains notices that are intended to protect your personal safety and prevent damage to the equipment. Qualified Personnel:
Electrical Hazard: Only qualified personnel should perform installation procedures. Within the context of the safety notes in this documentation, qualified persons are defined as persons who are authorized to commission, ground and label devices, systems, and circuits in accordance with established safety practices and standards. A qualified person understands the requirements and risks involved with installing outdoor electrical equipment in accordance with national codes. Federal Communications Commission (FCC) Notice This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
Reorient or relocate the receiving antenna. Connect the equipment into an outlet on a circuit different from that to which the Increase the separation between the equipment and receiver. receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. The device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. CE Information This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Warning: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 102cm between the radiator and your body. Industry Canada Notice This device complies with ISEDs licence-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Le prsent appareil est conforme aux CNR d ISED applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes : (1) le dispositif ne doit pas produire de brouillage prjudiciable, et (2) ce dispositif doit accepter tout brouillage reu, y compris un brouillage susceptible de provoquer un fonctionnement indsirable. Caution: The device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems. Warning: IC Radiation Exposure Statement: This equipment complies with ISED radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 57cm between the radiator and your body. Caution: Avertissement: les dispositifs fonctionnant dans la bande 5150-
5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux. Warning: Dclaration d'exposition aux radiations: Cet quipement est conforme aux limites d'exposition aux rayonnements ISED tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 57cm de distance entre la source de rayonnement et votre corps. Detachable Antenna Usage This radio transmitter [4141B-AP460] has been approved by Innovation, Science and Economic Development Canada to operate with the antenna types listed in the AP460 Installation Guide, with the maximum permissible gain indicated. Antenna types not included in the list that have a gain greater than the maximum gain indicated for any type listed are strictly prohibited for use with this device. Cet metteur radio [4141B-AP460] a t approuv par Innovation, Sciences et Dvelop-
pement conomique Canada pour fonctionner avec les types dantennes numrs dans le Guide dinstallation de lAP460, avec le gain maximal admissible indiqu. Les types d'antenne non inclus dans la liste qui ont un gain suprieur au gain maximal indiqu pour l'un des types numrs sont strictement interdits pour une utilisation avec cet appareil. Table 5 Approved antennas Frequency band 2.4G/5G 2.4G/5G 2.4G/5G 2.4G/5G 2.4G/5G 2.4G/5G 2.4G/5G 2.4G/5G 2.4G/5G Antenna Type Omni Omni Omni Omni Panel Omni Omni Omni Omni 2.4G/5G 2.4G/5G 2.4G/5G 2.4G/5G 2.4G 5G Panel Panel Panel 1 Panel 2 Dipole Panel Model ML-2452-APA2-01 ML-2452-APA2-02 ML-2452-HPA5-036 ML-2452-HPAG4A6-01 ML-2452-PNA5-01R ML-2452PTA4M4-036 ML-2452HPAG5A8-01 WS-AO-DQ04360N WS-AO-DQ04360S ML-2452-SEC6M4-036 /
WS-AI-DQ05120 WS-AI-DE07025 ML-2452-PNA7-01R WS-AI-DE10055 ML-2499-HPA8-01 AIO-DQ15021-N Australia Notice Thread Antenna Gain BLE/
5G 2.4G 4.85 4.85 5.7 7.3 5 6.6 8 6 6 3.17 3.17 3.9 4 4.5 5 5 5.5 5.5 6.92 7.5 7.8 10.5
7.23 6.5 10.7 7.5
15 7.8 8
Warning: AU co-location MPE Statement: This equipment complies with AU radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 25 cm between the radiator and your body. Other Countries Brazil Este produto est homologado pela ANATEL, de acordo com os procedimentos regulamentados pela Resoluo n. 242/2000 e atende aos requisitos tcnicos aplicados. Este equipamento no tem direito proteo contra interferncia prejudicial e no pode causar interferncia em sistemas devidamente autorizados. Para maiores informaes, consulte o site da ANATEL www.anatel.gov.br. Warning: CE co-location MPE Statement: This equipment complies with CE radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator and your body. AT EE IT PT BE FI LV RO BG FR LT SK HR DE LU SI CY EL MT ES CZ HU NL SE DK IE PL UK Hazardous Substances This product complies with the requirements of Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment. NCC Statement All Operational Modes Frequency AP460i AP460e 2.4GHz 5GHz 802.11b, 802.11g, 802.11n (HT20), 802.11n
(HT40), 802.11ax (HEW20), 802.11ax
(HEW40), 802.15.4 (Thread), Bluetooth (LE) 802.11b, 802.11g, 802.11n (HT20), 802.11n
(HT40), 802.11ac (VHT20), 802.11ac
(VHT40), Bluetooth(BR/EDR, LE) 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac
(VHT80), 802.11ac (VHT160), 802.11ax
(HEW20), 802.11ax (HEW40), 802.11ax
(HEW80), 802.11ax (HEW160) 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80), 802.11ac (VHT160) The frequency and the maximum transmitted power in EU are listed below:
Frequency Maximum transmitted power (AP460i) Maximum transmitted power (AP460e) 2412-2472MHz 19.98 dBm 2402-2480MHz (BR/EDR) N/A 2402-2480MHz (LE) 5180-5240MHz 5260-5320MHz 5500-5700MHz 2405-2480MHz 6.23 dBm 22.98 dBm 22.98 dBm 29.98 dBm 6.48 dBm 20 dBm 6 dBm 8 dBm 23 dBm 23 dBm 30 dBm N/A European Waste Electrical and Electronic Equipment (WEEE) Notice In accordance with Directive 2012/19/EU of the European Parliament on waste electrical and electronic equipment (WEEE):
1 The symbol above indicates that separate collection of electrical and electronic equipment is required. 2 When this product has reached the end of its serviceable life, it cannot be disposed of as unsorted municipal waste. It must be collected and treated separately. 3 It has been determined by the European Parliament that there are potential negative effects on the environment and human health as a result of the presence of hazardous substances in electrical and electronic equipment. 4 It is the users responsibility to utilize the available collection system to ensure WEEE is properly treated. For information about the available collection system, contact Extreme Environmental Compliance at Green@extremenetworks.com. Declaration of Conformity in Languages of the European Community English Finnish Dutch French Swedish Danish German Greek Icelandic Italian Spanish Portuguese Malti Hereby, Extreme Networks, declares that the radio equipment type (AP460i/e) is in compliance with Directive 2014/53/EU. For full text of the EU Declaration of Conformity, please contact Extreme Regulatory Compliance at compliancerequest@extremenetworks.com Tten Extreme Networks vakuuttaa, ett Radio laite tyyppi (AP460i/e) on direktiivin 2014/53/EU mukainen.EU vaatimustenmukaisuusvakuutuksen tydellisest tekstist ota yhteytt rimmisiin viranomais sdksiin osoitteessa compliancerequest@extremenetworks.com Extreme Networks verklaart hierbij dat het type radioapparatuur (AP460i/e) in overeenstemming is met richtlijn 2014/53/EU.Voor de volledige tekst van de EU-
conformiteitsverklaring u contact opnemen met extreme regelgeving op compliancerequest@extremenetworks.com Par la prsente, Extreme Networks dclare que le type d'quipement radio
(AP460i/e) est conforme la directive 2014/53/UE.Pour le texte intgral de la Dclaration de conformit de l'UE, veuillez communiquer avec Extreme Regulatory Compliance compliancerequest@extremenetworks.com Hrmed intygar Extreme Networks att radioutrustning typ (AP460i/e) verensstmmer med direktiv 2014/53/EU.Fr fullstndig text av EU-frskran om verensstmmelse, vnligen kontakta Extreme regelefterlevnad p compliancerequest@extremenetworks.com Herved erklrer Extreme Networks, at radioudstyrs typen (AP460i/e) er i overensstemmelse med direktiv 2014/53/EU.For den fulde ordlyd af EU-
overensstemmelseserklringen bedes du kontakte Extreme Regulatory Compliance p compliancerequest@extremenetworks.com Dabei erklrt Extreme Networks, dass der Funkgertetyp (AP460i/e) mit der Richtlinie 2014/53/EU im Einklang steht.Fr den vollstndigen Wortlaut der EU-
Konformittserklrung wenden Sie sich bitte an extreme Regulatory Compliance unter compliancerequest@extremenetworks.com
(AP460i/e) 2014/53/.
, compliancerequest@extremenetworks.com Hrlendis, Extreme Networks, lsa v yfir a tvarpsbnaargerin (AP460i/e) s samrmi vi tilskipun 2014/53/ESB.Fyrir fullan texta ESB yfirlsingu um samrmi, vinsamlegast hafu samband vi Extreme Reglufylgni compliancerequest@extremenetworks.com Di conseguenza, Extreme Networks dichiara che il tipo di apparecchiature radio
(AP460i/e) conforme alla direttiva 2014/53/EU.Per il testo integrale della Dichiarazione di conformit dell'UE, contattare Extreme Regulatory Compliance presso compliancerequest@extremenetworks.com Por la presente, Extreme Networks declara que el tipo de equipo radioelctrico
(AP460i/e) cumple con la Directiva 2014/53/UE.Para obtener el texto completo de la Declaracin de conformidad de la UE, pngase en contacto con Extreme Regulatory Compliance en compliancerequest@extremenetworks.com Por este meio, a Extreme Networks declara que o tipo de equipamento de rdio
(AP460i/e) est em conformidade com a Diretiva 2014/53/UE.Para obter o texto integral da Declarao de Conformidade da UE, contacte o cumprimento regulamentar extremo em compliancerequest@extremenetworks.com B ' dan, netwerks estremi, jiddikjara li t-tip ta ' tagmir tar-radju (AP460i/e) huwa konformi mad-Direttiva 2014/53/UE.Gat-test si tad-dikjarazzjoni ta '
konformit tal-UE, jekk jogbok ikkuntattja lill-konformit regolatorja compliancerequest@extremenetworks.com ExtremeWirelessTM Outdoor Access Points Quick Reference AP460i AP460e Scan to Download the XIQ Mobile Application Commission, monitor, and troubleshoot devices easily with XIQ Companion mobile application (supported on iOS and Android). Use your mobile device camera to scan the serial number, capture installation images, assign or change device location, and network policy. The XIQ Companion mobile application enables you to access the device CLI for troubleshooting and view device and client status. XIQ iOS Mobile App XIQ Android Mobile App Scan for Product Support Details XIQ Onboarding Documentation Copyright 2023 Extreme Networks, Inc. All Rights Reserved. Notice Legal Notices Extreme Networks, Inc. reserves the right to make changes in specifications and other information contained in this document and its website without prior notice. The reader should in all cases consult representatives of Extreme Networks to determine whether any such changes have been made. The hardware, firmware, software or any specifications described or referred to in this document are subject to change without notice. Trademarks Extreme Networks and the Extreme Networks logo are trademarks or registered trademarks of Extreme Networks, Inc. in the United States and/or other countries. All other names (including any product names) mentioned in this document are the property of their respective owners and may be trademarks or registered trademarks of their respective companies/owners. For additional information on Extreme Networks trademarks, see:
www.extremenetworks.com/company/legal/trademarks/
Documentation, Installation Videos, and Support For product support, including Documentation and Installation Videos, visit:
www.extremenetworks.com/documentation P/N 9036417-04 Rev AA