AP460C Hardware User Guide Read about and view specifications and compliance information for the AP460C devices in this topic. Install the AP460C devices using this topic. The AP460C is a Tri Radio 802.11ax access point based on advanced radio technology and is IP67 rated for harsh and extreme outdoor envir-
onments, with an extended temperature range (-40 C - +60 C). The AP460C tri-radio design delivers 802.11ax 2x2:2 and 4x4:4 data rates con-
currently on the 2.4 and 5 GHz radios, and has a third radio for a dedicated dual-band sensor. For regulatory and compliance information, see "Regulatory Compliance Statements". Important! Change the Country Code If your access point is configured for the World Regulatory Domain, it is important to set the country code to the country in which the APwill be deployed to meet regulatory requirements and for optimal wireless operation. To do this, follow these steps:
The country code selection is for World models only and is not available to FCC, CAN, and other country-specific models. Per FCC reg-
ulations, all Wi-Fi products marketed in the United States must be set to U.S. channels only. 1. Power on the AP and allow it to find and connect to ExtremeCloudIQ. Once the APis connected it appears in the table of devices on the Manage > Devices page. 2. Select the check box next to the AP, and then choose Assign Country Code from the Actions drop-down list. In the dialog box, select the appropriate country from the drop-down list, and then click Save. 3. Upload your changes to the device. Safety Guidelines Safety Guidelines The information in this section applies to AP460C devices. The following safety icons are used in these guidelines to identify the type of precaution:
AP60C Hardware Guide 1 AP460C Hardware Guide 1 To meet Canadian radiation exposure requirements, these devices should be installed at aminimum distance of 14" (35 cm) from people or animals. This icon indicates a general caution. Failure to comply with a caution notification can result in damage to equipment. This icon indicates an electrical caution. Failure to comply with an electrical notification can result in serious injury or death, and extensive damage to equipment. This icon indicates a laser caution. Failure to comply with a laser caution can result in serious injury. The following table lists the safety precautions you should follow when installing your AP460C devices. Extreme Networks devices must be installed by a professional installer who is certified to install these types of devices and to ensure that they are properly grounded and meet applicable local and national electrical codes. These devices are intended for indoor use only. Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Do not install the device in an environment where the operating ambient temperature might exceed the recom-
mended ranges. For products available in the USA/Canada market, for the 2.4 GHz band, only channels 1-11 can be operated. Selec-
tion of other channels is not possible. Changes or modifications made to this device that are not expressly approved by the party responsible for com-
pliance could void the user's authority to operate the equipment. Use only attachments and accessories specified by Extreme Networks. These devices are not intended for use by persons (including children) with reduced physical, sensory, or mental cap-
abilities, or with lack of experience of knowledge unless they are given supervision or instruction concerning use of the devices by a person who is responsible for their safety. Children should be supervised to ensure that they do not play with the devices. Electrostatic discharge (ESD) can damage equipment and impair electrical circuitry. ESD damage occurs when elec-
tronic components are improperly handled and can result in complete or intermittent failures. Be sure to follow ESD-pre-
vention procedures when handling electronic components and equipment. During operation, the surfaces of the AP460C device can become hot. Use caution when handling. To meet federal radiation exposure requirements, these devices should be installed at aminimum distance of 12" (30 cm) from people or animals. Install the AP The following sections describe how to mount your AP in an outdoor location on a pole or flat surface. Shipping Carton Contents The AP460C shipping cartons contain the following items:
l AP460C chassis with two installed M20 cable gland assemblies and plugs, two installed M25 seal caps. l Hardware bag containing grounding hardware (M4 screw, split washer, and lock washer) l Read Me card. AP60C Hardware Guide 2 AP460C Hardware Guide 2 Install the AP Required Tools Mount the AP460C horizontally or vertically on a pole using the built-in brackets on the hardware, or on a solid flat surface using an accessory bracket (see "Accessories "). These devices can be installed in even the most extreme outdoor environments. The following sections describe the installation process. To install your AP460C device horizontally or vertically on a pole, you will need the following items:
l Two hose clamps that accommodate the diameter of the pole to which you are mounting the device. l A slotted screwdriver to tighten the hose clamps. Install the Device Before you install the device, make sure that you have all the materials and tools necessary, and familiarize yourself with the safety and site haz-
ard warnings. For best performance, deploy AP460C devices in relatively open areas at least 100' (30.5 m) apart from each other. Install the Device on a Vertical or Horizontal Pole Use the following steps to install the device on a vertical or horizontal pole. 1. Thread two hose straps of the correct diameter for the pole through the slots in on the back of the device and around the pole. Hose straps should be 1/2" (12 or 13 mm) wide and made of stainless steel. 2. While holding the device against the pole, use a slotted screwdriver to tighten first the top and then the bottom hose straps until the device is secure. Make sure that the LANglands are facing down (earth) to eliminate the chance of water entering the chassis. If you are installing the device to sit on top of a horizontal pole, make sure the top of the device faces up (sky) with the LANglands are protected by the top. AP60C Hardware Guide 3 AP460C Hardware Guide 3 Install the Device on a Flat Surface You can Install the device on a vertical or horizontal solid flat surface using the accessory wall bracket (AH-ACC-BKT-ASM). This kit contains the mounting bracket and four bolts without washers in the plastic bag labeled "Wall Mount". You will need to provide four mounting bolts or screws and wall mount anchors that are appropriate for the wall type where you are installing the device. 1. Insert the four M5 bolts that come in the bracket accessory kit into the holes on the bottom of the AP and torque each bolt to 16 inch-lbs. 1. Use the bracket as a template to mark the location of the mounting holes in the wall. Use the holes indicted by the blue arrows in the illus-
tration below. AP60C Hardware Guide 4 AP460C Hardware Guide 4 2. Drill a hole in the wall at each mark using a drill bit that is slightly smaller than the diameter of the screws so the screw threads will grip the wall securely. If you are not installing the device on a concrete wall, you can use threaded screws and plastic wall anchors (not supplied) to mount the device. 3. Attach the bracket to the wall using the appropriate mounting screws for the wall type. 4. Insert the heads of the bolts on the device into the large end of the bracket keyholes and slide the device down until the bolts rest in the narrow end of the keyholes. 5. Tighten the locking screws on the bracket to secure the device. 6. Ground the device as shown below. For horizontal mounts, be sure that the ports are facing earth to reduce the chance of water entering the chassis. As an added security measure, you can thread a safety strap through one of the cable strap slots in addition to the hose strap. Connect the other end of the strap to a secure object. Ground the Device Use the following steps to properly ground the AP460C. 1. Crimp the ground terminal onto a 10 AWG ground wire. 2. 3. Insert the terminal on to the M4 screw, followed by the star washer. insert the screw into the AP and torque it to 12 inch-lbs. 4. Connect the other end of the ground wire to an appropriate earthing location. Install the Waterproof Ethernet Cable Housing Use the waterproof Ethernet cable housing to ensure a weatherproof seal for the Ethernet cable. Use the following procedures to install the housing. AP60C Hardware Guide 5 AP460C Hardware Guide 5 1. Disassemble the waterproof housing. There are four pieces: the sealing nut, the claw, a waterproof 2-part seal, and a threaded main hous-
ing body. Assemble these pieces around the Ethernet cable in the order shown here:
2. 3. 4. 5. 7. Insert the Ethernet cable through the sealing nut and claw. Take the seal apart, insert the cable between the two halves and reassemble the seal. Insert the seal into the claw. Insert the Ethernet connector into the main body until the seal and claw fit snugly. Make sure that the small tabs on the claw fit into their counterparts on the main body. 6. Screw the threaded nut onto the threaded housing until it is tight. Insert the Ethernet cable into the female connector on the chassis. Rotate the head of the threaded housing clockwise until it locks into place. 8. Connect the other end of the Ethernet cable to a PoE injector or PoE-enabled switch. Accessories The following accessories are available for the AP460C:
l AH-ACC-PW-CBL-US: 6' 18 AWG universal power cord with US plug l AH-ACC-PW-CBL-UK: 6' universal power cord with UK plug l AH-ACC-PW-CBL-EU: 6' universal power cord with EUplug l AH-ACC-PW-CBL-AU:6' universal power cord with AUplug l AH-ACC-PW-CBL-JP: 6' universal power cord with Japan plug l AH-ACC-PW-CBL- KR: 6' universal power cord with Korea plug Remove the RJ45 Cable Safely l AH-ACC-BKT-ASM: Mounting bracket assembly for wall mounts. Attach this bracket to the back of the unit using the four holes in the chassis. If you need to uninstall the device for any reason, for example for troubleshooting, you will need to remove the RJ45 cable. Use the following steps:
1. For GE1 or GE2, loosen the gland sealing nut. 2. Move the gland cap, claw and seal down the cable at least 6 inches from the LANconnector. 3. Use a thin, strong non-conductive tool, such as a flat wooden stick to reach into the main gland body and depress the plastic locking latch on the RJ45 connector. Make sure not to touch any components of the PCBA board near the gland area. 5. While pressing down on the latch, gently pull on and remove the cable. 6. Remove the sealing nut, claw, and seal from the cable. AP60C Hardware Guide 6 AP460C Hardware Guide 6 Hardware Components You can see the hardware components of the AP460C in the illustration below and read about them in the sections that follow. The status light, located between the two Ethernet ports, conveys operational states for system power, firmware updates, Ethernet and wireless interface activity, and major alarms. At setup, this light cycles through the following sequence:
Component Descriptions Status Light l Solid White: The power is on and the device is operational. l Solid Amber: The device is on and is booting.. l Blinking Amber: The device is performing a firmware upgrade. l Dark: The power is off. Ethernet Ports AP460C devices have two RJ45 Ethernet ports (Eth0 and Eth1) that automatically negotiate half- and full-duplex connections with the con-
necting device. The ports are autosensing and adjust to straight-through and crossover standard Cat2, Cat5, Cat5e, or Cat6 Ethernet cables automatically. The APreceives power through an Ethernet connection to the ETH0 port from PSE (power sourcing equipment) that is compatible with the 802.3at and 802.3at standards. Micro USB Console Port Remove the waterproof screw cap to access the micro USB port and the Reset button. Through the micro USB Console port you can make a serial connection between your management system and the AP. When you connect to the device using the micro USB Console port, the man-
agement station from which you connect to the device must have a VT100 emulation program, such as Tera Term Pro (a free terminal emu-
lator) or Hilgraeve HyperTerminal (provided with Windows operating systems from XP forward). The serial connection settings are: 9600 bits per second, 8 data bits, no parity, 1 stop bit, no flow control. You can order a micro USB console adapter cable for this AP here. To troubleshoot an AP460C, you must first uninstall it from the outdoor location. AP60C Hardware Guide 7 AP460C Hardware Guide 7 This illustration shows the USB, Micro USB and Reset buttons, which are located behind waterproof screw caps. The pin-to-signal mapping for the Console port is shown below:
Pin 1 2 3 4 5 USBPort Reset Button Definition NC RxD (input to AP) TxD (output to terminal) Signal (GND) Signal (GND) AP460C devices have a standard USB port that you can use to connect USB-based beacons (iBeacon, for example) and IoT (Internet of Things) devices. To access the port, remove the gland cap screw. The Reset button is located behind the same waterproof screw cap as the micro USB port. Use the Reset button to reset the device or restore the factory default settings. To prevent the reset button from resetting the configuration, enter this command:
no reset-button reset-config-enable When this command is enabled, pressing the button for 5 seconds will still reboot the AP, but pressing it for more than 10 seconds will not reset its configuration. Hardware Specifications The following sections list radio, device, power, and environmental specifications for the AP460C. Interfaces l 100/1000/2500 Mbps auto-negotiation RJ45 Ethernet PoE port l 10/100/1000 Mbps auto-negotiation RJ45 Ethernet port AP60C Hardware Guide 8 AP460C Hardware Guide 8 l BLE Bluetooth Low Energy IEEE 802.11a/b/g/n/ac/ax 4x4 IEEE 802.11a/b/g/n/ac/ax 2x2 l l l IEEE 802.11a/b/g/n/ac/ax 1x1 scanner Radio Specifications 802.11a l 5.150-5.350, 5.470 - 5.850 GHz operating frequency l Orthogonal Frequency Division Multiplexing (OFDM) modulation l Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 with auto fallback 802.11b 802.11g 802.11n l 2.4-2.5 GHz operating frequency l Direct-Sequence Spread-Spectrum (DSSS) modulation l Rates (Mbps): 11, 5.5, 2,1 with auto fallback l 2.4-2.5 GHz operating frequency l Orthogonal Frequency Division Multiplexing (OFDM) modulation l Rates (Mbps): 54, 48, 36, 24, 18, 12, 9, 6 with auto fallback l 2.4-2.48 and 5.150-5.350, 5.470 - 5.850 GHz operating frequency l 802.11n modulation l Rates: MCS0 - MCS7 (6.5 MBps- 600Mbps) l 1x1, 2x2,4x4 MIMO radio l HT20/HT40 support l A-MPDU and A-MSDU frame aggregation 802.11ac l 5.150-5.350, 5.470 - 5.850 GHz operating frequency l 802.11ac modulation (256-QAM) l Rates: VHT_MCS0 - MCS9, (6.5-3467 Mbps), NSS = 1-4 l 1x1, 2x2,4x4 MIMO radio l VHT20/VHT40/VHT80 support l TxBF (transmit beamforming) 802.11ax l 5.150-5.350, 5.470 - 5.850 GHz operating frequency l 802.11ax modulation (1024-QAM) l Dual-band OFDMA l Rates (Mbps): HE0-HE1 (8 Mbps - 1200 Mbps), NSS = 1-2 l 1x1, 2x2,4x4 MIMO radio l VHT20/VHT40/VHT80/VHT160 support l TxBF (transmit beamforming) 802.11ax (for 5 GHz sensor) l 802.11ax modulation (1024-QAM) l Dual-band OFDMA l 2.4-2.48, 5.150-5.350, 5.470 - 5.850 GHz operating frequency l Rates (Mbps): HE_MCS0-11 (8 Mbps - 1200 Mbps), NSS = 1-4 AP60C Hardware Guide 9 AP460C Hardware Guide 9 l 1x1, 2x2,4x4 MIMO radio l l l VHT20/VHT40/VHT80/VHT160 support TxBF (Transmit beamforming) Transmit Power and Sensitivity Specifications Output power may be limited by regulatory requirements. 2.4 G: Reviewers -
Tolerance +2/-2 dB @25C Mode 11b 11g HE20 11b 11g HE20 2.4 G Sensitivity Data Rate 1,2,5.5,11 54 Mbps 48 Mbps 36 Mbps 6 Mbps MCS 0,1,2 MCS 3 MCS 4, 5 MCS 6,7 MCS 8,9 MCS 10,11 1 Mbps 11 Mbps 6 Mpbs 36 Mpbs 48 Mbps 54 Mbps MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 MCS 10 MCS 11 Power 18 15 16 17 18 18 17 16 15 14 12
-99
-90
-96
-84
-80
-78
-95
-91
-89
-86
-83
-79
-77
-76
-72
-70
-67
-64 Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB dB AP60C Hardware Guide 10 AP460C Hardware Guide 10 5 G:
Tolerance +2/-2 dB @25C Data Rate Power Mode 11a HE20 HE40 HE80 HE160 5 G Sensitivity 11a HE20 54 Mbps 48 Mbps 36 Mbps 6 Mbps MCS 0,1,2 MCS 3,4 MCS 5,6 MCS 7,8 MCS 9 MCS 10 MCS 11 MCS 0,1,2 MCS 3,4,5 MCS 6,7,8 MCS 9 MCS 10 MCS 11 MCS 0,1,2 MCS 3,4,5 MCS 6,7,8 MCS 9 MCS 10 MCS 11 MCS 0,1,2 MCS 3,4,5 MCS 6,7,8 MCS 9 MCS 10 MCS 11 6 Mbps 36 Mbps 48 Mbps 54 Mbps MCS 0 MCS 1 MCS 2 MCS 3 18 18 19 20 20 19 18 17 16 15 14 19 18 17 16 15 14 19 18 17 16 15 14 19 18 17 16 15 14
-94
-83
-79
-77
-94
-91
-88
-86 Unit dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm dBm db db db db db db db db AP60C Hardware Guide 12 AP460C Hardware Guide 12 Mode Data Rate Power Unit HE40 HE80 HE160 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 MCS 10 MCS 11 MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 MCS 10 MCS 11 MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5 MCS 6 MCS 7 MCS 8 MCS 9 MCS 10 MCS 11 MCS 0 MCS 1 MCS 2 MCS 3 MCS 4 MCS 5
-82
-78
-77
-75
-71
-69
-66
-63
-92
-88
-86
-83
-80
-76
-74
-73
-69
-67
-63
-60
-88
-85
-83
-80
-77
-73
-71
-69
-66
-64
-60
-57
-85
-82
-80
-77
-74
-70 db db db db db db db db db db db db db db db db db db db db db db db db db db db db db db db db db db db db db db AP60C Hardware Guide 13 AP460C Hardware Guide 13 Mode Data Rate Power Unit MCS 6 MCS 7 MCS 8 MCS 9 MCS 10 MCS 11
-68
-66
-63
-61
-57
-54 db db db db db db Device Specifications l Chassis dimensions: 9.4 W 9.4.1 H 2.9 D (237.6 mm x 237.6 mm x 57 mm) l Weight: 4 pounds (1 .8 kilograms) l Four dual-band internal WiFi antennas and one BLE internal antenna l Eth0 Ethernet port: autosensing 10/100/1000Base-T/TX Mbps, with 802.3at-compliant PoE l Eth1 Ethernet port: autosensing 10/100/1000Base-T/TX Mbps l 3 integrated single-band 5.1-5.8 GHz omnidirectional antennas l 4 integrated dual band 2.4-1.5 GHz and 5.1-5.8 GHz omnidirectional antennas Antennas Antenna Gain AP460C:
Software Mode 2x2 Radio 4x4 Radio Scanner IoT Radio Azimuth Beamwidth Elevation Beamwidth Dual band 2.4 GHz 3.24 dBi Dual 5G 5 GHz 3.56 dBi 5 GHz 4.21 2.4 GHz 3.74 dBi/
5 GHz 3.42 dBi 5 GHz 4.21 2.4 GHz 3.74 dBi/
5 GHz 3.42 dBi dBi dBi 3.2 dBi 3,2 dBi 360 360 150 150 AP60C Hardware Guide 14 AP460C Hardware Guide 14 Antenna Plots The antenna plots for the AP460C are available below. The Ethernet port location is noted on each chart. AP60C Hardware Guide 15 AP460C Hardware Guide 15 AP60C Hardware Guide 16 AP460C Hardware Guide 16 AP60C Hardware Guide 17 AP460C Hardware Guide 17 Power Specifications l IEEE 802.3af PoE (Power over Ethernet) Power Options l Power draw w/o USB: typical 19.2 W, maximum 20.8 W l 802.3at PoE capable Gigabit Ethernet port (RJ45 power input pins: wires 4, 5, 7, 8 or 1, 2, 3, 6) l 802.3af and 802.3at PoE injector PoE input:
Typical:
Maximum:
Power Profile l 54V DC, 0.40A 21.7W Max. PoE with USB 2.5W (IEEE 802.3at only 42.5-57VDC, USB 0.5A) l 54V DC, 0.45A 19.2W Max. PoE without USB (IEEE 802.3af 37-42.5VDC) l 54V DC, 0.43A 23.3W Max. PoE with USB 2.5W (IEEE 802.3at only 42.5-57VDC, USB 0.5A) l 42.5V DC, 0.49A 20.8W Max. PoE without USB (IEEE 802.3af 37-42.5VDC) l ESD Protection:8 kV contact discharge / 15 kV air discharge AP460C 2.4 G Radio 5 G Radio Sensor Radio BLE USB 2.5 G Ethernet 1G Ethernet 2.4 G and 5 G (15 dBm) 802.3af 2x2 (14 dBm) 2x2 (17 dBm) Enabled No Yes No 802.3at 2x2 (18 dbm) 4x4 (18 dBm) 2.4 G and 5 G
(18 dBm) Enabled Yes Yes Yes AP60C Hardware Guide 18 AP460C Hardware Guide 18 Environmental Specifications l Operating temperature: -40 to 131 F (-40 to 55 C) l Storage temperature: -40 to 158 F (-40 to 70 C) l Relative Humidity: 0 to 95% RH (noncondensing) l Environmental discharge: +/- 8KV contact and +/- 15 KV air l Housing: IP67 rated outdoor use Regulatory Compliance Statements The regulatory compliance statements in this section apply to Extreme Networks AP460C devices. Japan Indoor Use For Japan, the AP460C is restricted for indoor use in the 5150-5350 MHz band only. Japan Equipment VCCI-B Statement Compliance Statement - Europe EU Declaration of Conformity View full CE Declaration of Compliance and this information online at www.aerohive.com/support/regulatory-compliance Extreme Networks, Inc. declares that this device complies with the essential requirements of the Radio Eqiupment Directive 2014/53/EU. l Bulgarian []: [Extreme Networks] [Extreme Networks] , [AP460C]
2014/53/U. l Croatian [hrvatski]: [Extreme Networks] ovime izjavljuje da je radijska oprema tipa [AP460C] u skladu s Direktivom 2014/53/EU. l Czech [esky]: [Extreme Networks] Tmto [jmno vrobce] prohlauje, e typ rdiovho zazen [AP460C] je v souladu se smrnic l Danish [Dansk]: Hermed erklrer [Extreme Networks], at radioudstyrstypen [AP460C] er i overensstemmelse med direktiv 2014/53/EU. l Dutch [Nederland]Hierbij verklaar ik, [Extreme Networks], dat het type radioapparatuur [AP460C] conform is met Richtlijn 2014/53/EU. l English: Hereby, [Extreme Networks], declares that this [ [[[Undefined variable Primary.AP640]]]] is in compliance with the essential require-
ments and other relevant provisions of Directive 2014/53/EU. l Estonian [Eesti]: Kesolevaga deklareerib [Extreme Networks], et kesolev raadioseadme tp [AP460C] vastab direktiivi 2014/53/EL l Finnish [Suomi]: [Extreme Networks] vakuuttaa, ett radiolaitetyyppi [AP460C] on direktiivin 2014/53/EU mukainen.. l French [Franais]: Le soussign, [Extreme Networks], dclare que l'quipement radiolectrique du type [AP460C] est conforme la directive 2014/53/EU. nuetele. 2014/53/UE. l German [Deutsch]: Hiermit erklrt [Extreme Networks], dass der Funkanlagentyp [AP460C] der Richtlinie 2014/53/EU entspricht. l Greek []: [Extreme Networks] [ AP460C]
2014/53/EU. l Hungarian [Magyar]: [Extreme Networks] igazolja, hogy a [AP460C] tpus rdiberendezs megfelel a 2014/53/EU irnyelvnek. Italian [Italiano]: Il fabbricante, [Extreme Networks], dichiara che il tipo di apparecchiatura radio [AP460C] conforme alla direttiva 2014/53/UE. Latvian [Latviski]: Ar o [Extreme Networkss] deklar, ka radioiekrta [AP460C] atbilst Direktvai 2014/53/ES. Lithuanian [Lietuvi]: A, [Extreme Networks], patvirtinu, kad radijo rengini tipas [AP460Cs] atitinka Direktyv 2014/53/ES. l l l l Maltese [Malti]: B'dan, [Extreme Networks], niddikjara li dan it-tip ta' tagmir tar-radju [AP460C] huwa konformi mad-Direttiva 2014/53/UE. l Polish [Polski]: [Extreme Networks] niniejszym owiadcza, e typ urzdzenia radiowego [AP460C] jest zgodny z dyrektyw 2014/53/UE. AP60C Hardware Guide 19 AP460C Hardware Guide 19 l Portuguese [Portugus]: O(a) abaixo assinado(a) [Extreme Networks] declara que o presente tipo de equipamento de rdio [AP460C] est em conformidade com a Diretiva 2014/53/UE. l Romanian [Romania]: Prin prezenta, [Extreme Networks] declar c tipul de echipamente radio [AP460C] este n conformitate cu Directiva l Slovak [Slovensky]: [Extreme Networks] tmto vyhlasuje, e rdiov zariadenie typu [AP460C] je v slade so smernicou 2014/53/E. l Slovenian [Slovenija]: [Extreme Networks] potrjuje, da je tip radijske opreme [AP460C] skladen z Direktivo 2014/53/EU. l Spanish [Espaol]: Por la presente, [Extreme Networks] declara que el tipo de equipo radioelctrico [AP460C] es conforme con la Directiva l Swedish [Sverige]: Hrmed frskrar [Extreme Networks] att denna typ av radioutrustning [AP460C] verensstmmer med direktiv 2014/53/UE. 2014/53/UE. 2014/53/EU. Radio Specifications Bluetooth BLE Beacon l 2402 - 2480 MHz l Frequency Hopping Spread-Spectrum (FHSS) USA, Canada, and Taiwan Radio Frequency Bands a. USA l 802.11b/g/n/ac: 2.4 GHz band: 2400-2483 MHz l 802.11a/n/ac/ax:
5 GHz band:
5150-5250, 5725-5850 MHz l BLE: 2402-2480 MHz b. Canada l 802.11b/g/n/ac: 2.4 GHz band: 2400-2483 MHz l l Indoor:
802.11a/n/ac/ax:
5 GHz band:
5150-5250, 5725-5850 MHz l Outdoor:
802.11a/n/ac/ax:
5 GHz band:
5725-5850 MHz l BLE: 2402-2480 MHz c. Taiwan l 802.11b/g/n/ac: 2.4 GHz band: 2412-2462 MHz l 802.11a/n/ac/ax: 5 GHz band: 5180-5320, 5500-5825 MHz l l l l BLE: 2412-2462 MHz EURadio Frequency and Power Levels This product supports the following radio frequencies and power levels in the EUversion:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm (indoor only), 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Bulgarian []: :
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm (indoor only), 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Croatian [hrvatski]: Ovaj proizvod podrava sljedee radijske frekvencije i razinu snage u verziji EU:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm esky [Czech]: [Tento produkt podporuje nsledujc rdiov frekvence a rovn vkonu ve verzi EU:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Danish [Dansk]: Dette produkt understtter flgende radiofrekvenser og strmniveauer i EU-versionen:
AP60C Hardware Guide 20 AP460C Hardware Guide 20 l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Dutch [Nederland]: Dit product ondersteunt de volgende radiofrequenties en vermogensniveaus in de EU-versie:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm English: This product supports the following radio frequencies and power levels in the EU version:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm (indoor only), 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm (indoor only), 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Estonian [Eesti]: See toode toetab jrgmisi raadiosagedusi ja vimsuse taseme ELis versioon:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Finnish [Suomi]: Tm tuote tukee seuraavia radiotaajuuksia ja tehoja EU-versiossa:
l 802.11a/b/g/n, 2.4 GHz band: 2412-2472 MHz EIRP<20 dBm l 802.11 a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5500-5720 MHz EIRP<30 dBm l BLE: 2402-2480 MHz EIRP<8 dBm French [Franais]: Ce produit prend en charge les frquences radio et les niveaux de puissance suivants dans la version EU:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm German [Deutsch]: Dieses Produkt untersttzt die folgenden Funkfrequenzen und Leistungsstufen in der EU-Version:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Greek [] :
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Hungarian [Magyar]: Ez a termk a kvetkez rdifrekvencikat s teljestmnyszinteket tmogatja az EU verzijban :
l 802.11b/g/n/ac, 2.4 GHz band: 2412-2472 MHz EIRP<20 dBm l 802.11 a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5500-5720 MHz EIRP<30 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Italian [Italiano]: Questo prodotto supporta le seguenti frequenze radio e livelli di potenza nella versione UE:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Latvian [Latviski]: is produkts atbalsta dus radio frekvences un jaudas lmeni ES versiju:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Lithuanian [Lietuvi]: is produktas palaiko iuos radijo danius ir galios lyg ES versija:
l 802.11b/g/n/ac, 2.4 GHz band: 2412-2472 MHz EIRP<20 dBm l 802.11 a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5500-5720 MHz EIRP<30 dBm AP60C Hardware Guide 21 AP460C Hardware Guide 21 l BLE: 2402-2480 MHz EIRP<8 dBm Maltese [Malti]: Dan il-prodott jappoja l-frekwenzi tar-radju li ejjin u l-livelli ta 'enerija fil-verjoni UE:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Pollish [Polski]: Ten produkt obsuguje nastpujce czstotliwoci radiowe i poziomy mocy w wersji unijnej:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Portuguese [Portugus]: Este produto suporta as seguintes frequncias de rdio e nveis de potncia na verso UE:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax : 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Romanian [Romania]: This product supports the following radio frequencies and power levels in the EU version l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Slovak [Slovensky]:Tento produkt podporuje nasledujce rdiov frekvencie a rovne napjania vo verzii E:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Slovenian [Slovenija]: Ta izdelek podpira te radijske frekvence in ravni moi v razliici EU:
l 802.11b/g/n/ac, 2.4 GHz band: 2412-2472 MHz EIRP<20 dBm l 802.11 a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5500-5720 MHz EIRP<30 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Spanish [Espaol]: Este producto admite las siguientes frecuencias de radio y niveles de potencia en la versin de la UE:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm Swedish [Sverige]: Denna produkt stder fljande radiofrekvenser och effektniver i EU-versionen:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm, 5470-5850 MHz EIRP<30 dBm, 5725-5850 MHz<14 dBm l BLE: 2402-2480 MHz EIRP<8 dBm UK: This product supports the following radio frequencies and power levels in the EUversion:
l 802.11b/g/n/ac, 2.4 GHz band: 2400-2483.5 MHz EIRP<20 dBm l 802.11a/ac/n/ax: 5 GHz band: 5150-5350 MHz EIRP<23 dBm (indoor only), 5500-5730 MHz EIRP<30 dBm, 5730-5850 MHz<23dBm (indoor only) l BLE: 2402-2480 MHz EIRP<8 dBm EURadiation Warning Statement To meet radiation exposure requirements, these devices should be installed at a minimum distance of 12" (30 cm) from people or animals. AP60C Hardware Guide 22 AP460C Hardware Guide 22 Restrictions:5150-5350 MHz for indoor use only. Bulgarian []: , 20 .
: 5150-5350 MHz . Croatian [hrvatski]: Da bi zadovoljili zahtjeve izloenosti zraenju, ti ureaji trebaju biti instalirani na minimalnoj udaljenosti od 20 cm od ljudi ili ivot-inja. Ogranienja: 5150-5350 MHz samo za unutarnju uporabu. Czech [esky]: Aby byly splnny poadavky na ozen, mly by bt tato zazen instalovna v minimln vzdlenosti 20 cm od lid nebo zvat. Omezen: 5150-5350 MHz pouze pro vnitn pouit. Danish [Dansk]: For at opfylde kravene til strlingseksponering skal disse enheder installeres i mindst 20 cm afstand fra mennesker eller dyr. Restriktioner: 5150-5350 MHz kun til indendrs brug. Dutch [Nederland]: Om aan stralingsblootstelling te voldoen, dienen deze apparaten op een minimumafstand van 20 cm van mensen of dieren te worden genstalleerd. Beperkingen: 5150-5350 MHz alleen voor gebruik binnenshuis. English: To meet radiation exposure requirements, these devices should be installed at aminimum distance of 20 cm from people or animals. Restrictions: 5150-5350 MHz for indoor use only. Estonian [Eesti]: Et rahuldada kiirituse nuetele, need seadmed tuleb paigaldada minimaalselt 20 cm inimestelt vi loomadelt. Piirangud: 5150-5350 MHz sisetingimustele. Finnish [Suomi]: Steilytysvaatimusten tyttmiseksi nm laitteet on asennettava vhintn 20 cm etisyydelle ihmisist tai elimist. Rajoitukset: 5150-5350 MHz vain siskyttn. French [Franais]: Pour rpondre aux exigences d'exposition aux rayonnements, ces appareils devraient tre installs une distance minimale de 20 cm des personnes ou des animaux. Restrictions: 5150-5350 MHz pour usage intrieur seulement. German [Deutsch]: Um die Anforderungen an die Strahlenbelastung zu erfllen, sollten diese Gerte in einem Abstand von 20 cm von Per-sonen oder Tieren installiert werden. Einschrnkungen: 5150-5350 MHz nur fr den Innenbereich. Greek []: , 20 cm .
: 5150-5350 MHz . Hungarian [Magyar]: A sugrterhelsi kvetelmnyek teljestse rdekben ezeket az eszkzket legalbb 20 cm tvolsgra kell felszerelni az emberek vagy az llatoktl. Korltozsok: 5150-5350 MHz csak beltri hasznlatra. Italian [Italiano]: Per soddisfare i requisiti di esposizione alle radiazioni, questi dispositivi devono essere installati ad una distanza minima di 20 cm da persone o animali. Restrizioni: 5150-5350 MHz solo per uso interno. Latvian [Latviski]: Lai apmierintu starojuma iedarbbas prasbm, s ierces ir uzstdtas pie minimlo attlumu 20 cm no cilvkiem vai dzvniekiem. Ierobeojumi: 5150-53250 MHz izmantot tikai telps. Lithuanian [Lietuvi]: Siekiant patenkinti SPINDULIAVIM reikalavimus, ie taisai turi bti rengiami ne ariau kaip 20 cm nuo moni ar gyvn. Apribojimai: 5150-5350 MHz naudoti tik patalpose. Maltese [Malti]: Biex jilqu l-tiiet ta 'espoizzjoni tar-radjazzjoni, dawn il-mezzi gandhom jiu installati f'distanza minima ta' 20 m minn nies jew annimali. Restrizzjonijiet: MHz 5150-5350 gall-uu fuq ewwa biss. Polish [Polski]: Aby speni wymagania dotyczce naraenia na promieniowanie, urzdzenia te powinny by instalowane w odlegoci min-
imum 20 cm od ludzi lub zwierzt. Ograniczenia: 5150-5350 MHz tylko do uytku wewntrznego. Portuguese [Portugus]: Para atender aos requisitos de exposio radiao, esses dispositivos devem ser instalados a uma distncia mnima de 20 cm de pessoas ou animais. Restries: 5150-5350 MHz para uso interno apenas. Romanian [Romania]: Pentru a ndeplini cerinele de expunere la radiaii, aceste dispozitive ar trebui instalate la o distan minim de 20 cm de la oameni sau animale. Restricii: 5150-5350 MHz numai pentru uz intern. Slovak [Slovensky]: Ak chcete splni poiadavky na vystavenie iareniu, mali by by tieto zariadenia intalovan v minimlnej vzdialenosti od ud alebo zvierat od minimlnej vzdialenosti 20 cm. Obmedzenia: 5150-5350 MHz iba pre vntorn pouitie. Slovenian [Slovenija]: Da bi zadovoljili zahteve izpostavljenosti sevanja, morajo biti te naprave nameene na razdalji najmanj 20 cm iz ljudi ali ivali. Omejitve: 5150-5350 MHz samo za uporabo v zaprtih prostorih. AP60C Hardware Guide 23 AP460C Hardware Guide 23 Spanish [Espaol]: Para cumplir con los requisitos de exposicin a la radiacin, estos dispositivos deben instalarse a una distancia mnima de 20 cm de personas o animales. Restricciones: 5150-5350 MHz slo para uso en interiores. Swedish [Sverige]: Fr att uppfylla kraven p strlningsexponering br dessa enheter installeras p minst 20 cm frn mnniskor eller djur. Restriktioner: 5150-5350 MHz endast fr inomhusbruk. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio com-
munications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful inter-
ference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
l Reorient or relocate the antenna of the receiving devices. l Increase the separation between this equipment and receiving equipment. l Connect this equipment into an outlet on a circuit different from that to which the receiving equipment is connected. l Consult the dealer or an experienced radio or TV technician for help. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. IMPORTANT NOTE:
Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 12" (30 cm) between the radiator and people or animals. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Country Code selection feature to be disabled for products marketed to the US/CANADA. Warning: This is a Class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. Brazil Statement Mexico Statement Este equipamento no tem direito proteo contra inteferncia prejudicial e no pode causar interferncia em sistemas devidamente autor-
izados. La operacin de este equipo est sujeta a las siguientes dos condiciones
(1) es posible que este equipo o dispositivo no cause interferencia perjudicial y
(2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacin no deseada. The operation of this equipment is subject to the following two conditions:
(1) it is possible that this equipment or device does not cause disruptive interference and
(2) this equipment or device must accept any interference, including interference that may cause undesired operation). Industry Canada Statement:
This device may not cause interference, and This device complies with Industry Canada license-exempt RSS standards. Operation is subject to the following two conditions:
l l l l This device must accept any interference, including interference that may cause undesired operation of the device. Le prsent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorise aux deux conditions suivantes :
l'appareil ne doit pas produire de brouillage, et l'utilisateur de l'appareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible d'en compromettre le fonc-
tionnement. Caution:
(i) the device for operation in the band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems;
Avertissement:
AP60C Hardware Guide 24 AP460C Hardware Guide 24
(i) les dispositifs fonctionnant dans la bande 5150-5250 MHz sont rservs uniquement pour une utilisation lintrieur afin de rduire les risques de brouillage prjudiciable aux systmes de satellites mobiles utilisant les mmes canaux;
Radiation Exposure Statement:
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and oper-
ated with minimum distance 35 cm between the radiator and people or animals. Dclaration d'exposition aux radiations:
Cet quipement est conforme aux limites d'exposition aux rayonnements IC tablies pour un environnement non contrl. Cet quipement doit tre install et utilis avec un minimum de 35 cm de distance entre la source de rayonnement et des personnes ou des animaux.
(missing or bad snippet) Taiwan Compliance Information Extreme Networks AP460C 5.25-5.35 Taiwan MPE Warning MPE (MPE) 1mW/cm2 0.734 mW/cm2
"avoid affecting the operation of nearby radar systems".
" High-gain directional antennas can only be used in stationary point-to-point systems."
Copyright Extreme Networks, Inc. 6480 Via Del Oro, San Jose CA, 95119 USA AP60C Hardware Guide 25 AP460C Hardware Guide 25