FCC ID: 2AV2U-KMETERII kMeter II

FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. CAUTION: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the users authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed and used in ac-

cordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to cor-

rect the interference by one or more of the following measures:

Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This equipment has been tested and meets applicable limits for radio frequency (RF) exposure. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. Canadian Compliance Statement This device contains license-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Devel-

opment Canada license-exempt RSS(s). Operation is subject to the following two conditions:

(1) This device may not cause interference.

(2) This device must accept any interference, including interference that may cause undesired operation of the device. Lmetteur/rcepteur exempt de licence contenu dans le prsent appareil est conforme aux CNR dInnovation, Sciences et Dveloppement conomique Canada applicables aux appareils radio exempts de licence. Lexploitation est autorise aux deux conditions suivantes :

1) Lappareil ne doit pas produire de brouillage;

2) Lappareil doit accepter tout brouillage radiolectrique subi, mme si le brouillage est susceptible den com promettre le fonctionnement. NOTE: Afin dassurer la conformit aux exigences de la FCC en matire dexposition aux radiofrquences, aucune modi-

fication de lantenne ou de lappareil nest autorise. Toute modification de lantenne ou de lappareil pourrait avoir pour consquence que lappareil dpasse les exigences en matire dexposition aux radiofrquences et annule le droit de lutilisateur de faire fonctionner lappareil Follow us for the latest info, training tips and inspiration!

kMeter II Quick Start Guide

/ go_exxentric

/ go_exxentric

/ go.exxentric Before using your kMeter, please read the following This Exxentric Flywheel Device is equipped with a built-

To learn more about the kMeter, how it works and in kMeter that connects with your Android or iOS device to provide real time feedback. Two AA batteries are pre-

installed and the kMeter is ready to connect via the app about the different metrics, head over to our website:

exxentric.com/kMeter For questions or concerns, please contact:

support@exxentric.com directly. manual switch. The kMeter turns on and off automatically and has no To distinguish between your different device and kMeter units, a sticker with a unique ID number on it is included. Place this sticker on your device for future reference. This unique number corresponds to the kMeter unit installed on the device. If multiple kMeters are in range, a drop down list with kMeter IDs will be visible when the connect option in the app is chosen. From here, select the device you wish to be connected to. This is your kMeter ID sticker below The device has been evaluated to meet general RF exposure requirement.This device should be installed and operated with a minimum distance of 5mm between the device and your body.

SHENZHEN LCS COMPLIANCE TESTING LABORATORY LTD. FCC ID: 2AV2U-KMETERII LABEL AND LOCATION Size: L3.0cm*W2.0cm Label Location This report shall not be reproduced except in full, without the written approval of Shenzhen LCS Compliance Testing Laboratory Ltd. Page 1 of 1

Exxentric AB Agent Authorization Address: Karlsbodavagen 39, Bromma 16867, Sweden Company: Exxentric AB Product Name: kMeter II Trade Mark: Exxentric AB Model Number(s): kMeter II FCC ID:2AV2U-KMETERII We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Date: 2020-07-16 Name:

Fredrik Correa Title:

CEO Company: Exxentric AB

Exxentric AB Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2AV2U-KMETERII Date: 2020-07-16 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description Tune-up Procedure External Photos Test Setup Photos Internal Photos User Manual In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely, Signature:

Name:Fredrik Correa Title: CEO