Before Use Names and Functions / Components Cipher's Dedicated Application Download and Install (for Android) Welcome users of Quantum Shieldz Cipher. This manual introduces how to use Quantum Shieldz Cipher
(hereinafter referred to as Cipher). As of now, Cipher app is compatible to Android OS version only. iOS version is planned to be released. Cipher is a device which pairs with a smartphone via bluetooth that may affect the audio quality of phone call depending on the users communication conditions. When the phone call voice quality deteriorates, reducing the distance between the device and smartphone(10-20 cm or less) or moving to a place with fewer bluetooth devices helps improve the voice quality of phone call. The capacity of the battery is 1000mAh and it lasts less than 8 hours in standby mode (5-6 hours on continuous phone call). While Cipher of the other party you are calling is turned off, it can still receive call requests or text messages and thus it is recommended to keep the device turned off when not in off, continuous use. Screen capture and recording voice function of the smartphone do not work during a phone call linked to the Quantum application. Recording voice function(or recording voice application) may operate but Cipher locks the microphone itself, the voice would not be recorded. When a regular phone call comes in from another party while on a secure call using Cipher, there will be automatic refusal to the call coming. After the secure call ends, you can check missed calls and respond. 2 3 4 Quantum Shieldz Cipher Device 9 Warranty Card 5 Speaker 1 6 7 8 10 Cipher exclusive earphone Microphone USB Type-C Port 11 USB Type-C Cable Press the button for a while(more than 3.5 seconds) to turn the power on/off. When a secure call comes in, press the button briefly and you can answer the call. Increases the volume during a call. (+) When you press the button briefly in standby mode, you can check the charge level of battery. Decreases the volume during a call. (-) When you press the button briefly in standby mode, you can check the charge level of battery. Turns the vibrate mode on/off when receiving a call. Application exclusively for Quantum Shieldz Cipher Power button Volume(+) button Volume(-) button Vibrate/silent mode button Q(Red LED) In standby mode, LED flickers. During a call, LED light is always on. Bluetooth status
(Blue LED) Displays the status of connection between smartphone and Cipher. LED flickers when disconnected, and LED keeps turned on when connected or in standy mode. Displays the level of battery charge and operation state.
- When connected to power, it lights up according to the battery charge level.
(From light off at 0%, the lights turns on sequentially per battery charge level, up to 100% full charge where the light turns off)
- When you click the volume button, it lights up for 3.5 seconds depending on the battery charge level and then turns off.
- While on a call, it flickers according to the battery charge level.
- Power On/Off blinks sequentially. When connected to USB Type-C port, it lights up. Register Cipher device with serial number and QRcode. Only the USB Type-C MONO earphones device can be used exclusively for Cipher. These earphones are used for analog type only, not DAC built-in earphones for general use. Bluetooth status
(Blue LED) Power status
(Red LED) Warranty card Earphone for Cipher USB Type-C cable The USB Type-C cable is for charging battery. During charging, the charging status and level of charge are displayed on LED of the device. Powered by EYL V1.2.2 Cipher Registration and Bluetooth Connection Functions of Each Menu of the Dedicated Application 1. User registration and bluetooth connection 1. Contact registration 2-1. Making a call When the person you are trying to reach is in available status(Cipher connected) 2-2. Making a call When the person you are trying to reach is in unavailable status(Cipher disconnected) 3. Receiving a call Open Cipher application and click buttons in order to activate camera: [setting user registration insert QR code]
You can add contact information at [Recents / Contacts / Keypad]
a tab at the bottom of the application. Scan QR code on the back of warranty card with camera and product information will be automatically entered. When you open the application, you can find [Recents / Contacts
/ Keypad] tab at the bottom and you can make a call using this tab. You can check whether the person you are calling is available or not. If he/she is not available, you can make a forced call or send a request message. When the person you are trying to call does not connect his/her smart phone to Cipher, you can send a message(push alarm) or make a forced call. Later when the person connects Cipher and turns up available, you can make a call. When there is an incoming call, the recipients smart phone(ring or vibrate) and Cipher device(vibrate or silent) will ring. You can answer the call by pressing the dedicated applications call button or Cipher devices power button. Select the device, register information and click register.
(Required to agree to terms and conditions when registering) Open the application and turn on the power of Cipher, they are automatically connected via bluetooth. You can add contact information by touching the buttons in order:
[Recents select the persons contact info add(+) button register contact]
Make a call by touching the buttons in order:
[Recents/ Contacts touch the person you are calling call]
Send Connection Message 2. Check bluetooth connection Check the application status bar Check with device
[Bluetooth disconnected] color gray You can add contact information by touching the buttons in order:
[Contacts add(+) button register contact]
[Bluetooth connected] color red
[Bluetooth disconnected] Blue LED flickers
[Bluetooth connected] Blue LED lights on You can add contact information by touching the buttons in order:
[Keypad enter contact information Add Contact(text)]
Make a call by touching the buttons in order:
[Keypad touch the person you are calling call]
Calling from [Quantum Kim]. Quantum Shieldz Cipher is required. CALL SEND CANCEL ACCEPT DECLINE
[Call request(caller)s screen]
[The other party(Recipient)s screen]
Send a request for a call by touching the buttons in order:
[Recents/ Contacts touch the contact info of the person you are trying to call send push alarm or call request]
On keypad screen, you can try to call regardless of the recipients connection status. When the recipient becomes available to receive the call, a note of incoming call is informed and the call will be on hold to be received. Answer the call Answer the call Cipher Device Dedicated Application This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications (including the antennas) to this device that are not expressly approved by the manufacturer may void the user's authority to operate the equipment. This equipment complies with FCC RF Radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. Download and install the application to use Cipher. You can download it from the Google Play Store on Android OS.
(Search terms: Quantum Shieldz, Quantum Shieldz Cipher, QSC, etc.) Required permissions during installation must be allowed for stable use.
(Allow access to bluetooth, location information, etc.) To use all the optimized functions of Cipher, keep the application updated to the latest version. It is recommended to use smartphone with OS installed higher than Android version 8.1.0 (Oreo) for the applications normal operation. For more information and inquiries Company(EYL) Website : www.eylpartners.com Brand(Quantum Shieldz) Website : www.quantumshieldz.com Product or business related inquiries quantum@eylpartners.com l TEL. (+82) 02-6993-7190