FCC ID: 2AGOZ-H38W Media Receiver

User Guide Contents of the package:

Main device Charing dock AC adaptor How to perform the initial setup of your device:

1. Remove plastic covering and sleeve. 2. Plug the included AC adapter DC plug into the charging dock. 3. Plug the AC adaptor AC plug into a rated power outlet. 4. Place device securely on top of the dock. The screen will light up if the dock is connected correctly. 5. Follow device instructions. Legal and Safety Information You will be able to read Legal and Safety information by navigating to the following sections in the below order:

Settings --> About --> Legal & Safety Only use the included AC adaptor with your Device. If the AC adaptor or cable damaged, discontinue use immediately. Using Your Device Around Other Electronic Devices Device generates, uses, and can radiate radio frequency (RF) energy and, if not used in accordance with its instructions, may cause interference to radio communications and electronic equipment. External RF signals may affect improperly installed or inadequately shielded electronic operating systems, entertainment systems, and personal medical devices. While most modern electronic equipment is shielded from external RF signals, if in doubt, check with the manufacturer. For personal medical devices

(such as pacemakers and hearing aids), consult with your physician or the manufacturer to determine if they are adequately shielded from external RF signals. FCC Compliance Statement The Device and its related accessories like the remote and the adapter (the "Products") comply with part 15 of the FCC Rules. Operation of each Product is subject to the following two conditions: (1) this Product may not cause harmful interference and (2) this Product must accept any interference received, including interference that may cause undesired operation. Note: This Product has been tested and found to comply with the limits for a Class B digital device or external switching power supply, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. The equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. FCC Caution: Changes or modifications to a Product by the user that are not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Information Regarding Exposure to Radio Frequency Energy The Device meets the governments requirements for exposure to radio waves. The Device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the U.S. Government. The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT (equipment under test) transmitting at the specified power level in different channels. Product Specifications Input Rating: 20Vdc, 2.25A Connectivity: Dual Band (2.4/5 GHz) MIMO 802.11 a/b/g/n/ac; BT, BLE Operating temperature: 0C to 35C (32F to 95F)

R-NZ FACEBOOK T ECHNOLOGIES IRELAND L IMITED 4 G RAND C ANAL S QUARE, DUBLIN 2 , I RELAND FACEBOOK TECHNOLOGIES, LLC, 1 HACKER WAY, MENLO PARK, CA, USA MODEL: TN49KC SN: xxxxxxxxxxxxxxxxxxxx MADE IN CHINA FCC ID: 2AGOZ-H38W IC: 20849-G38E INPUT: 20.0V 2.25A All marks are located on the bottom of the device

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5462302.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Facebook Technologies, LLC 1 Hacker Way Menlo park, California 94025, United States Tel: (650) 313-9778 ; Fax: 4085649962 Date: June 30, 2021 To whom it may concern, Please be notified that I, David Woo, have designated Jones Tsai in Sporton International Inc. as the person being responsible for this project and to sign the form 731 and other documents. Any and all acts carried out by Jones Tsai in Sporton International Inc. on the matters relating to all processes required in the FCC approval and any communication needed with the national authority, shall have the same effect as acts on our own behalf. We further certify that neither the applicant nor any party to this application, as defined in 47 CFR Ch. 1.2002 (b), is subject to a denial to Federal benefits, that include FCC benefits, pursuant to section 5301 of the Anti-Drug Abuse Act of 1998, 21 U.S.C. 862. This authorization is limited to the product of as following:

FCC ID: 2AGOZ-H38W If you have any acknowledgement and response, please send it to Sporton International Inc. directly. Sincerely yours, ________________________ David Woo david.woo@fb.com

WARNING:pdfminer.pdfpage:The PDF <_io.BufferedReader name='/Volumes/Scratch/Incoming/eg-scratch/5462301.pdf'> contains a metadata field indicating that it should not allow text extraction. Ignoring this field and proceeding. Use the check_extractable if you want to raise an error in this case Facebook Technologies, LLC 1 Hacker Way Menlo park, California 94025, United States Tel: (650) 313-9778 ; Fax: 4085649962 Date: June 30, 2021 Federal Communications Commission Office of Engineering and Technology Laboratory Division 7435 Oakland Mills Rd Columbia MD 21046-1609 Subject: Request for Confidentiality FCC ID: 2AGOZ-H38W To Whom It May Concern, Pursuant to the provisions of Sections 0.457 and 0.459 of Commissions rules (47CFR0.457, 0.459), we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. Schematic Diagram Block Diagram Part List Operational Description Tune-up Procedure Above mentioned document contains detailed system and equipment description which are considered proprietary information in the operation of the equipment. The public disclosure of the above documents will be harmful to our company and would give our competitors an unfair advantage in the market. In additional to above-mentioned documents, pursuant to Public Notice DA 04-1705 of the Commission s policy, in order to comply with the marketing regulations in 47 CFT 2.803 and the importation rules in 47 CFR 2.1204, and to ensure that business sensitive information remains confidential until the actual marketing of newly authorized devices, we are requesting the commission to grant short-term confidentiality request on the following attachment(s) for 180 days after the grant as outlined in Public Notice DA 04-1705. External Photos Internal Photos Test Setup Photos User Manual is our understanding that all It test reports, FCC ID label, and all correspondence during the certification review cannot be granted as confidential documents, and that all such information will be made available for public review once the grant of equipment authorization is issued. Best Regards, _______________________ David Woo david.woo@fb.com