E) Attention 1.Make sure the power is off after use. 2.Since there can be high voltage inside the unit, Do NOT open or repair the unit yourself. If there is any defect, please contact an experienced technician. 3.Keep the environment dry and ventilated when using the product. Do not leave or use the flash in humid or dusty environment. 4.Do NOT apply pressure to the product. 5.Read this manual carefully before using the product. RC-6 Instruction Manual F) FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC rules. Operation is subject to the following twoconditions: 1) this device may not cause harmful interference, and 2) this device must acceptany interference received, including interference that may cause undesired operation. 3 FM1909_RC-6_eng Thank you for purchasing FalconEyes products. For further details of our related products, please contact your local distributor or visit our webpage at www.falconeyes.com.hk Thank you. Please read this manual carefully before using this product. E-mail: info@falconeyes.com.hk Website: www.falconeyes.com.hk A) Product Overview RC-6 remote control is equipped with LCD screen and built in 2.4GHz. It can control single or multiple lights, the remote has 4 chan-
nels and users can adjust the channels base on their needs. Please set the same channel between light and remote for the single light control, and users may control multiple lights by setting all the lights in same channel. Users can adjust the lights easily by using the RC-6. B) Panel Diagram C) Operating Instructions 1. After install the battery and switch on the RC-6, users can adjust the color temperature, dimming and channel by the adjustment knob. 2. After switch on the remote, the LCD screen will show the color temperature and dimming. Color temperature adjustment After switch on the remote Fig1, press the adjustment knob once. The :
(behind c) will flash and user may adjust the color temperature (3000k-
5600k) by the adjustment knob. Dimming adjustment After switch on the remote Fig1, press the adjustment knob twice. The :
(behind DIM) will flash and user may adjust the dimming (0-100%) by the adjustment knob. Channel adjustment After switch on the remote and press the adjustment knob thrice Fig2. The :
(behind CH) will flash and user may adjust the channel (OFF-4) by the adjust-
ment knob. 1 2 3 6 7 8 4 5 1.LCD Display 2. Power switch 3.Adjustment knob 4.Battery bay 5.Battery cover 6.Color temperature 7.Dimming 8.Channel Fig.1 Fig.2 D) Specifications:
Model no. Frequency Remote distance Voltage LCD Display Size (LxWxH) Weight RC-6 2.4GHz 20 M 1.5V AA Battery 102 x 66 x 24 mm 92 g 1 2