FCC ID: PONFDBP Arm Blood Pressure Monitor/Automatic Wireless Smart Blood Pressure Monitor

 

Upper Arm Blood

Pressure Monitor

Model ：FDBP-A10BL

USER MANUAL

Subject to our actual product.

■ Thanks for using our product.

■ Take care of this instruction manual.

■ Please read this manual carefully before using.

Precaution:

Please read the instruction manual carefully before use it.

If you have any questions, please consult the salesperson

in the purchasing center or ask your doctor.

FCC ID:PONFDBP

CONTENT

1. Quick instructions ........................................................................1

2. Product Structure Description ...................................................1

3. Warnings and precautions ..........................................................2

4. Instruction ........................................................................................2

5. Product operation instructions ................................................3

6. Connect the cuff .............................................................................3

7. Correct measurement posture .................................................3

8. Measuring blood pressure .........................................................4

9. View measurement results .........................................................4

10. Set the function ..........................................................................5

11. WHO blood pressure definition function ............................6

12. Maintenance and storage ........................................................6

13. Blood pressure measurement Q&A ...........…........…............7

14. Blood pressure knowledge ......................................................7

15. Error warning/Troubleshooting ........................................8

16. Reference standard .....................................................................9

17. Place in ...........................................................................................9

18. Technical specifications ........................................................... 9

19. List of attachment .....................................................................10

20. Standardized symbolic description .................................10

21. Electromagnetic compatibility information ...............10

 1.Quick instructions

2.Product Structure Description

2.1 Upper Arm Blood Pressure Monitor

2.2display

2.3cuff

3. Warnings and precautions

3.1 Warning

• This product is not suitable for newborns.

• This product is for home use only. When the measurement is complete, consult your doctor if you have any doubts

about the measurement results.Do not self-diagnosis and treatment according to measurement results.

• When common arrhythmia (such as atria premature beats, premature ventricular and atrial fibrillation) occurs, it will affect the

measurement accuracy of blood pressure. If it is only sporadic, please take a rest for two hours before measuring. If it is a frequent

nature, please go to the hospital for confirmation and treatment immediately.

• If the airbag is inflated for a long time, immediately press the [START/STOP] button to stop the measurement. Continued

inflation presses the hand arm, which can cause limb numbness.

• Do not allow children to use the instrument without authorization: Some small parts may cause ingestion.

• It is forbidden to measure blood pressure on the side where the breast is removed.

•Do not allow children to use instruments without permission:Small parts can cause the risk of ingestion.Hose may cause

choking hazard.

•Do not allow service and maintain the product while in use

•Do not allow use the product while in charging

•In order to avoid bacterial cross-infection, the product alone is recommended

•pressurization of the CUFF can temporarily cause loss of function of simultaneously used monitoring ME EQUIPMENT on the

same limb;

•do not used together with HF SURGICAL EQUIPMENT

3.2 Precautions

• Avoid high temperature, humidity, dust and direct sunlight.

• Avoid damage to the arm band and rubber tube due to folding

• Do not disassemble this unit yourself! Otherwise it will cause the manufacturer's school pressure calibration to fail!

• Avoid falling or violently vibrating the body.

• The normal measurement period is about 1 minute. If the measurement is not stopped for a long time, please press

the [START/STOP] button to stop the measurement. Avoid numbness of the limbs due to prolonged compression of the arm.

• Original or medically compliant power adapters (eg iec 60601-1 certified) must be used, and non-original

accessories may present unpredictable risks.

• For better reading of the display, please note the following visible conditions: - Ambient brightness: 100lx~1500lx

- Line of sight: less than 30cm - Viewing angle: normal display ± 30 °

• Extreme temperature, humidity, and altitude conditions can affect the performance of the measurement, and the

Upper Arm Blood Pressure Monitor may not meet the stated performance specifications.

• Do not put the cuff on the wound, which will cause further damage.

• Do not measure blood pressure if there is intravascular access or treatment, or arteriovenous (A-V) shunt.

3.3 Purpose/intended use of device

Upper Arm Blood Pressure Monitor is intended to measure the blood pressure and pulse rate of adults and children at least 12

years of age, at household or medical center. (Not suitable for neonate, pregnancy or pre-eclampsia). with the cuff around the

left upper arm according to the instruction in the user's guide manual.

the patient is an intended operator

Intended operator should receive at least 8 years of education so that can read and understand the user manual

4.Instruction

4.1 Product Features

The FDBP-A10BL is an Upper Arm Blood Pressure Monitor that simultaneously measure systolic, diastolic blood pressure and

pulse rate through the principle of pressure oscillation.Not only its accuracy reaches the medical grade, but also suitable for

home health care. In addition, the humanized design provides users with the greatest convenience.

4.2 Self -Measurement

• Please keep in mind :self-measurement is equal to self control, not diagnosis or treatment. If you have abnormal

blood pressure, should consult physician immediately and follow physician’s instructions to take medicine.

• The pulse displayed by this unit is not suitable to be a fixed frequency detector that identify heart rate! Those who have a history of

heavier arrhythmia, should consult a professional physician about measured blood pressure value and confirm.

4.3 Electromagnetic Interference

Due to the unit has sensitive electronic components, avoid using it directly in strong electromagnetic environment (such as:mobile

phone, microwave oven etc.), as it may lead to inaccurate results.

5.Product operation instructions

5.1unpacking

Unpack the box and lay the product flat on the table.

Note：If you bring the product from a storage environment, place it in a normal use

environment for 20 minutes

5.2 battery

If there is a signal of low power on the display, connect your charger.

Icon lit: Battery is low.

Lo icon lights up: battery is exhausted.

Please connect adapter to charge.

※ Do not use this product while charging. No measurement function during charging

Please pay attention!

Once the signal of low power is displayed, the product will not

be used unless you charge it.

Note:

• Consult the dealer at the place of purchase for any adapter problems.

5.3Use adapter

Except the battery, this unit can also use a adapter (USB 5V).Must use the original or medical power supplies that meet medical

standards.

(example: IEC 60601-1 certification). Transformer connects to power socket is shown on the following. Adaptor connects to the

power socket of the product and press the START/STOP/memory button to test if it is power.

If power failure suddenly during measurement (for example, adapter plug is disconnected to power outlet), adapter single-pin

plug should be unplugged and reinsert into the unit again.

Any problems about adapter, please consult purchased dealer locally.

6.Connect the cuff

The correct method of using the cuff:

a.Insert the air tube plug into the air tube connector

a. Make sure the arm strap connector is fully inserted into the

Upper Arm Blood Pressure Monitor vent.

b. Please take off your coat, sweater and

other thicker clothes, do not have any

accessories, bare upper arm or wear a

thin shirt for measurement.

c. Wrap the cuff around the left arm.

d. Do not wrap the cuff too tightly (It

is the best to easily insert a finger)

and the lower edge of the cuff should

be 2~3 cm from the hand bend (as shown).

e. After wrapping the cuff around the upper arm, place the air tube on

the inside of the arm and on the same line as the middle finger (as

shown).

f. When measuring, please sit in the chair, place your feet flat on the

floor, place your arms on the table, and put the arms and the heart

on the same level to relax and measure in a relaxed and natural

posture.

7.Correct measurement posture

Preparation before measurement

For wireless features, see the attachment

A v o i d e a t i n g , s m o k i n g o r any form of activity before

measuring, all of which will affect the measurement. Try to relax

in a quiet environment, rest for 10 minutes, and then take

measurements.

If you have heavy clothing, please detach from the upper arm.

Select the arm for blood pressure measurement (usually the left

arm) and take blood pressure measurements on the same arm

and in the same area.

Regularly take blood pressure measurements at the same time

every day, because blood pressure will change differently over

time.

Common factors that lead to erroneous

measurements

Note: Comparative blood pressure measurements should be performed in the same condition

(usually referred to quiet conditions)!

If the arm artery is low (high) relative to the heart , it will result in a high (low) blood pressure value. (Each 15cm height

difference will produce 1.3kPa/mmHg error value)!

This unit is not suitable for newborns.

Note: Please use the original arm cuff that meets the clinical test requirement!

The loose or air bag exposed cuff will lead to false blood pressure.

The arm will compress the blood vessels due to repeated measurements. This condition will also cause a biased blood

pressure value. Therefore, when making repeated measurements, be sure to rest for 3-5 minutes or raise your arm for 3 minutes

to reduce the congestion.

8.Measuring blood pressure

8.1 Start measuring

Press the [start/stop] key to start automatic measurement.

Stop measurement

If there is any discomfort or for some reason, such as when the airbag is in a persistent over-inflated state, there may be a risk.

At this time, the blood pressure measurement must be stopped. You can press the [START/STOP] button and the Upper Arm

Blood Pressure Monitor will immediately release the air pressure in the cuff to suit your need.

2 Confirm measurement results

Automatic storage of measurement results. SYS

1) irregular pulse： DIA

PULSE

The unit can detect the arrhythmia. When this symbol appears after the measurement is completed, it may differ from your

normal blood pressure. Please measure it a few more times. If this symbol is displayed frequently, it is recommended that you

tell the doctor about this situation, and ask the doctor for frequent information on the irregular heartbeat indicator.

2) Error action prompt function:

The display represents speaking or moving during the measurement,

The measurement may not be correct. Please measure again.

3）Cuff wearing self-test prompt icon:

When the cuff is wrapped correctly, the screen displays

When the cuff is wrapped too loosely, the screen displays

Please press the [START/STOP] button to turn off the power, rewind the cuff correctly, and measure again

8.3 Removing the Arm Strap.

8.4 Automatic Shutdown

The number is displayed until the power is turned off (if you forget to turn off the

power, the monitor will automatically turn off after 30 seconds to save power).

Note: depending on the location, this product is available in mmHg or kPa display

mode, and can be used according to the selected display mode according to this

operating instructions.

9.View measurement results

The Upper Arm Blood Pressure Monitor can automatically record 120 measurements.If the measurement result is

remembered more than 120 times, the earlier measurement record will be deleted and the new measurement result will be recorded.

9.1 Check the memory

Press the [MEM] button to display the latest measurement results

Query memory value

9.2 Delete memory

This Upper Arm Blood Pressure Monitor can only delete all records at one time. Cannot delete a

single record.

When the measurement result is displayed, press and hold the [MEM] key while pressing the

[start/stop] key for about 3 seconds.

※Please do not press the 【start/stop】key first, otherwise the power will be cut off.

10. Set the function

The system defaults to user

1. In shutdown mode, press the [SET] button to switch to user 2, which can be switched cyclically.

10.2Setting time, date and kPa/mmHg unit selection

The unit automatically records the date and time of each measurement, which is very important.Because the blood pressure

of the human body is constantly changing on the same day, it is recommended that you set the correct date and time

immediately after installing the battery.Please set the correct date and time as following,(Example: enter time and day -12:08

pm. on December. 08th )

1. In the shutdown mode, press the [SET] key for 3 seconds, the product enters the function setting mode (if not selected, the

system defaults to the manufacturing time).The last two digits of the year will flash on the screen. You can enter the year by

pressing the [MEM] button (for example, you can increase the year from 21 to 22 by pressing it one time).

2.Press the [SET] button, and there will be a jump of the month in the left corner of the screen. At this time, the first digit of the

month starts to flash. You can enter the month by pressing the [MEM] button (for example, you can increase the month from

January to 12 months by pressing 11 times).

3.Press the [SET] button again, the screen will switch to the date setting, at this time, the last two digits of the date will start to

flash. You can enter the date by pressing the [MEM] button (for example, you can change the date from 1st to 08th by pressing

the button 7 times)

4Press the [SET] button again, the screen will switch to the time setting. At this time, the first digit (indicating hour) starts to

flash. Please input the time by pressing the [MEM] button (for example, you can change the time from 0:00 to 12:00 by pressing

the [MEM] button 12 times).

5.Press the [SET] button again, and the last two digits (in minutes) will start to flash. You can enter the minute by pressing the

[MEM] button (for example, pressing the button 8 times will increase the time from 0 minutes to 8 minutes).

6.Press the [SET] button again to enter the kPa/mmHg unit selection. You can select kPa or mmHg by pressing the [MEM]

button, “0.0” will display on the screen when kPa is selected, and “0”will display when mmHg is selected.

8. In the last step, press the [SET] button, and the date will be displayed after the setting is completed (the date will be

displayed first, and it will automatically jump to the time after 3 seconds). When there is no operation, it will automatically shut

down after 30 seconds.

11.WHO blood pressure definition function

This unit comes with a SYS warning and a warning bar reminder function. we can read from the height of the World Health

Organization blood pressure indicators, blood pressure is distributed in DIA (no WHO voice prompts) and ideal blood

pressure, normal blood pressure (green), normal partial hypertension (yellow), mild hypertension, moderate hypertension, and

severe hypertension (red). After the measurement is completed, the black zebra crossing appears at the corresponding position

according to the SYS and DIA.

The correspondence between color and blood pressure values is shown in the following table:

The meaning of the indicator color:

Green, it represents normal blood pressure.

Red,please consult physician

12.Maintenance and storage

11 Remove the plug of the air pipe

2 Gently bend the air pipe of the arm band and put it into the arm band

Do not over bend the windpipe of the arm band.

Otherwise it may not be possible to make a correct measurement.

Clean

When the product is dirty due to prolonged use, it is necessary to

follow the requirements for cleaning:

When the outer shell is dirty, gently wipe it with a wet soft cotton

cloth. If the outer shell is seriously soiled, wipe it with a soft dry

cloth dipped in 75% medical alcohol. It is recommended to clean at

least once a month.

Please pay attention to keeping the cuffs clean. After repeated

use for a long time, 95% concentration of medical alcohol can

be sprayed on the inside of the measuring contact of the cuff for

disinfection. If it is heavily soiled, it is recommended to replace the

cuff. You can contact the dealer or manufacturer for disposal.

This product is intended for home use and is a personal product.

Please use medical alcohol to clean it before use it to others.

Note: This product is not waterproof. Please be careful not to be

too moist when cleaning. Also it is not suitable for splashing with

water.

Please do not use any other solutions to clean this unit except

those method recommended by manufacturer.Because it may

damage your Upper Arm Blood Pressure Monitor.

Avoid washing the cuff!

Maintenance

Our company does not authorize any organization and individuals

to carry out maintenance.Therefore, please do not disassemble

or adjust this unit if you feel the product has functional problems.

Electronic Upper Arm Blood Pressure Monitor is a very precise product, any improper

maintenance, disassembly and adjustment will lead to inaccurate

measurement.

Avoid the damage of cuff and rubber tube caused by folding

Avoid falling or shaking this unit violently.

Within warranty period,please contact the distributor or

manufacturer if you have any questions about the product.

■ Calibration

The electronic Upper Arm Blood Pressure Monitor has been calibrated at the

time of manufacture. We recommend a static pressure test for this

Upper Arm Blood Pressure Monitor every 2 years, with the option of an authorized

dealer to calibrate your device. At any time, if you question the

accuracy of the measurement, please feel free to contact your dealer or

manufacturer for disposal.

13.Blood pressure measurement Q&A (when the measurement

value is high/low)

Q: Why is the blood pressure value measured at home lower than the blood pressure value

measured in the hospital?

A: I often feel nervous when measuring blood pressure in the hospital, so the measured value will

be high. Because I feel calm when measuring in my own home, sometimes it is

20mmHg~30mmHg (2.7kPa~4.0kPa) lower than the hospital's measurement value. It is very

important to know the blood pressure measurement value when you are calm at home.

Answer: If the measurement position is higher than the heart, the measurement value will also be

low. If the table where the Upper Arm Blood Pressure Monitor is placed is too high, it will cause

the armband to be higher than the heart, and the blood pressure value measured at this time will

also be low.

Q: Why is blood pressure measured at home higher than at the hospital?

A: If you are taking blood pressure medication, it will cause your blood pressure to rise when it

loses its potency.After a few hours of taking blood pressure medication, the effect wears off and

blood pressure increases accordingly.Consult your doctor for details.

A: Incorrectly positioned armbands can sometimes lead to high measurements.When the

armband is in the wrong position, the blood pressure monitor has a hard time picking up arterial

signals, and the blood pressure readings are too high.Please confirm again that the binding

position of the armband is correct.

A: Wrapping the armband too loosely can sometimes lead to high measurements.If the band is

wrapped too loosely, the pressure does not reach the arteries, so the blood pressure is measured

higher than it actually is.Please be careful not to leave a gap between the cuff and the arm when

binding.

A: Incorrect posture during measurement can sometimes lead to a higher measurement

result.Measurement postures such as sitting cross-legged, sitting on a couch or at a low desk, or

bending forward, can result in high blood pressure readings because of abdominal pressure or

because the armband is lower than the heart.

Q: Why is the blood pressure value measured each time different?

A: The blood pressure will vary according to the measurement time period. Even within a day,

such a change will occur. In order to manage blood pressure correctly, please take measurements

at the same time every day.

Q: Why is there pain and numbness around the arm strap?

A: This is a temporary phenomenon. Please do not worry.Some pain and numbness may be felt in

the arm as blood flow in the artery is temporarily stopped by tightening the arm band to measure

blood pressure.When the armband is removed, a short rest can relieve the pain.

Q: What is the key to blood pressure management?

A: Please record your medication status and living conditions.Recording daily changes in blood

pressure can provide a clearer picture of blood pressure trends, which can be more helpful in

personal health management.In addition, this record is very important for the doctor's

diagnosis.Therefore, we recommend that you record your blood pressure measurements as well

as the relevant measurement environment (such as the use of antihypertensive drugs, life status,

etc.).

Q: When is the best time to measure blood pressure?

Answer: The best time to measure blood pressure is within 1 hour after getting up in the morning,

or before going to bed at night. It is also recommended to measure at the same time every day.

14.Blood pressure knowledge

14.1High and low pressure

The highest blood pressure when the heart contracts and sends blood to the arteries is called "high pressure", and the lowest

blood pressure when the heart expands to store the next blood is called "low pressure". They are called systolic blood pressure

and diastolic blood pressure.

The following is a standard taxonomy established by the World Health Organization (WHO) for blood pressure, showed in the

below table: Unit (mmHg)

At the same time, the United Nations Committee on the Investigation, Evaluation and Treatment of Hypertension in 1988

recommended that whether it is systolic (SYS) or diastolic (DIA), average person must undergo at least three

measurements ,further diagnosis is needed when blood pressure is found to be higher than the normal level.

14.2 What measure should be taken when blood

pressure is too high or low?

a) Please consult physician.b) Prolonged ascending blood pressure (different types of SYS) will endanger human health.

Deposits on the walls of the blood vessels limit the flow of blood (that can result in arteriosclerosis), which

is very dangerous. Because it will cause insufficient blood supply to body’s important part (heart, brain, muscles and etc.), even

severely destroy the structure of heart. c) There are many factors that cause high blood pressure. We

could divide them into common hypertension and secondary hypertension. Secondary hypertension will lead to organ

disorders.

If your blood pressure value continues to rise, ask physician about

possible causes.

d) Changing your lifestyle also can prevent or lower hypertension, but this habit must be a part of healthy life, including：

1）Dietary Habit

Maintain normal weight as guided by doctor. Do not eat too much salt, as many "packaged foods" contain more salt. Avoid

eating greasy food. (Packaged foods usually contain large amounts of fat).

2）Preventing Diseases

Adhere to medical guidelines for preventing certain diseases, such as diabetes, fat metabolic disorders and gout .

3) Living Habit

Don't smoke, avoid drinking too much or high concentration drinking; limit the intake of caffeine (coffee, tea, chocolate and

etc.)

4）Physical Exercise

After medical examination, carry out regularly physical exercise; choose the sports program that requires endurance rather than

strength. Please note that do not exercise reaching your physical limit. Patients over 40 years old who is with medical history,

consult physician before you start to exercise.

Precaution：Consult your physician before using the device for any of the following conditions: common irregular pulse such as

atrial or ventricular premature beats or atrial fibrillation, arterial sclerosis, poor perfusion, diabetes, old age, pregnancy,

pre-eclampsia, renal diseases. Note that PATIENT motion, trembling, shivering may affect the reading.

15.Error warning/Troubleshooting

15.1 False Alarm

The LCD will display an error warning If any of the following occurs,as

shown in figure marked:

Error code after

Description

Reason of error

Solutions

leaving the

factory

Er01

Error of

Too much noise to detect an

Please rest for 2 minutes, adjust the cuff, keep

measurement

effective pulse signal

quiet during measurement, do not move or

Error

measurement

Error

measurement

of

of

Static pressure

exceeds the set

protection point

No pulse was detected

talk.

Test results deviate from normal

range

Pressure exceeds design ceiling

protection

Measure blood pressure again

Zero overtime

1. During the process of returning to

zero, the air pressure in the cuff

continues to fluctuate;

1. Keep the cuff intact when returning

to zero;

2. Detecting the power supply of the

2. The sensor part of the circuit is

sensor;

abnormal;

3. Sensor damage.

3. Replace the sensor.

Er02

Abnormal cuff

wearing

1. The cuff is not worn;

2. Wearing too loose;

Adjust the cuff. It is advisable to insert

two fingers just after the tightness

3. Wearing too tight;

is tied. The cuff mouth of the cuff is kept 2cm

4.5s did not reach 10mmHg or 18s

on the elbow socket.

did not reach 25mmHg;

5. After the air pressure exceeds

30mmHg, the air pressure is lower

than 20mmHg due to the looseness

of the cuff;

The power is lower

than the minimum

operating voltage.

Replace the battery

Lo

Power is not

enough

Over range alarm

When the test blood pressure value is higher than 280mmhg (excluding 280mmhg), the blood pressure value will continue to

flash at a frequency of 2HZ. When the blood pressure value is lower than 280mmhg, the flicker is released.

Other Information

Even a healthy individual, the blood pressure is constantly changing (presenting a jagged line), so when you make comparative

measurements, you must be in a fixed state (quiet environment)! If the difference is greater than 2.0 kPa / 15 mmHg if the above

conditions are met, or in some cases, in case of irregular hear beat, please consult your doctor.

15.2Troubleshooting

If any faults (or abnormal conditions) occur during use, you can check and exclude according to the items listed in the following

table:

Malfunction

When the battery is installed

and the switch is turned on,

shows nothing.

Exclude

Check whether the product has power

The air pump has begun to inflate, but there is no rise in

* Check the hose connection for air leakage or whether it is fully

arm pressure.

inserted into the socket.

Upper Arm Blood Pressure Monitor s fail to measure blood

pressure

1. Re-set the correct cuff.

2. If the left upper arm of the belt is covered with sleeves or other

frequently, or the blood pressure is abnormally high or low.

clothing, please take off. Re-measure blood pressure.

self-measured value is different from the measured

consult your doctor. Record daily measurements and consult

value of the doctor.

your doctor.

After the Upper Arm Blood Pressure Monitor is pressurized,

*The air hole connection of the hose in the arm belt has the

the air pressure of the cuff is released. And the rate is slow

phenomenon of "plastic ring" falling off. Please put the plastic

even not released at all.

ring on and measure again.

Any technical problems related to blood pressure monitor, should consult experts or medical personnel, do not disassemble

repair without permission!Unauthorized disassembly, will lose the warranty right!

16Reference standard 参考标准

We Famidoc Technology Co., Ltd. solemnly declares that the FDBP-A10BL

Upper Arm Blood Pressure Monitor we produced and sold meets the

following standards:

Performance safety standard:YY 0670/ IEC 80601-2-30

Electromagnetic compatibility:IEC60601-1-2

Safety standard:GB 9706.1/ IEC60601-1

Claim: The blood pressure value tested by this device is equivalent

to that measured by auscultation, and the error is in accordance

with the requirements of the code IEC/EN 80601-2-30.

Please read this instruction carefully before use.The product is

part of BF application equipment of internal power supply.

17.Place in

If this unit is damaged and need to be discarded,please dispose of the

discarded electronic waste in accordance with the relevant national

laws and regulations , dispose of the battery or product should not be

directly placed in the garbage can.

Please consult the licensor who responsible for local waste disposal if

you have any questions,.

18.Technical specifications

Mode

display

FDBP-A10BL

LCD display

Measuring method

Oscillometric method

Memory

Resolution

Automatically store each 60 sets of measured values for two users

0.1kPa(1mmHg)

Measurement Range

stress: 0kPa~39.3kPa(0~295mmHg);

Accuracy

Power

Pulse: 40 to 199beats/min

Static pressure: ±0.4 kPa (±3 mmHg)

Pulse: within ±5% of the reading

3.7V rechargeable lithium battery

Special accessory

Cuff, instruction manual

Size

Weight

153mm*101 mm*50 mm

About 300g(including battery)

Withstand pressure for the cuff

360mmHg

Upper arm circumference

220~420mm

Software version

V1.0

Electric shock protection type

Class II device

Shock protection procedure

BF application part

Expected use lifetime

Body in 5 years, Cuff in 2 years

Application component

Cuff

Operating condition

Transportation and

storage condition

Temperature: 5° C~40° C

Humidity: 15% RH~90% RH, No condensation

Atmospheric pressure: 70kPa~106kPa

Temperature: -25° C~55° C

Humidity: 15% RH~95% RH, No condensation

Atmospheric pressure: 70kPa~106kPa

Please strictly observe the environmental

conditions of transportation and storage,

otherwise it will affect the accuracy of the

equipment.

19.List of attachment

Component

Upper Arm Blood

Pressure Monitor

Quantity

1 PCS

Instruction manual

1 PCS

Cuff

AAA battery

1 PCS(with trachea)

4pcs

20.Standardized symbolic description

21.Electromagnetic compatibility information

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to thefollowing two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation

FCC CAUTION

Changes or modifications not expressly approved by the party responsible for compliance could void the user's

authority to operate the equipment.

Note:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part

15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio communications. However,

there is no guarantee that interference will not occur in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference by one or more of the following measures:

⚫ Reorient or relocate the receiving antenna.

⚫

⚫ Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

⚫ Consult the dealer or an experienced radio/TV technician for help.

Increase the separation between the equipment and receiver.

This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets

the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that are

deemed to comply without testing of specific absorption ratio (SAR).

When using the device, it is recommended to keep the device at a 30cm distance from the human body

Note:

● The Upper Arm Blood Pressure Monitor FDBP-A10BL meets the electromagnetic compatibility requirements of YY0505,

YY0670, IEC60601-1-2;

●Users should install and use the electromagnetic compatibility information provided by the random files. Portable and mobile

RF communication devices may affect the performance of the Upper Arm Blood Pressure Monitor FDBP-A10BL. Avoiding strong

electromagnetic interference when used, such as Close to mobile phones, microwave

26

ovens, etc.

●The instructions for the guide and the manufacturer are detailed in the attachment.

Warning:

·Use of this equipment adjacent to or stacked with other equipment should be avoided because it could result in improper

operation. If such use is necessary, this equipment and the other equipment should be observed to verify that they are

operating normally.

·Use of accessories, transducers and cables other than those specified or provided by the manufacturer of this the FDBP-A10BL

could result in increased electromagnetic emissions or decreased electromagnetic immunity of this equipment and result in

improper operation

·Portable RF communications equipment (including peripherals such as antenna cables and external antennas) should be

used no closer than 30 cm (12 inches) to any part of the FDBP-A10BL, including cables specified by the manufacturer. Otherwise,

degradation of the performance of this equipment could result.

Attachment:

Guidance and manufacturer´s declaration – electromagnetic emission – for all EQUIPMENT AND SYSTEMS

Guidance and manufacturer´s declaration – electromagnetic emission

The FDBP-A10BL is intended for use in the electromagnetic environment specified below. The customer or the

user of FDBP-A10BL should assure that it is used in such an environment.

Emissions test

Compliance

Electromagnetic environment - guidance

RF emissions

CISPR 11

RF emissions

CISPR 11

Harmonic

emissions

IEC 61000-3-2

Voltage

fluctuations/flicker

emissions

IEC 61000-3-3

The FDBP-A10BL uses RF energy only for its internal function. There

Group 1

for, its RF emissions are very low and are not likely to cause any

interference in nearby electronic equipment.

Class B

The FDBP-A10BL is suitable for use in all establishments,

N/A

including domestic establishments and those directly connected

to

the public low-voltage power supply network that supplies

N/A

buildings used for domestic purposes.

Guidance and manufacturer's declaration – electromagnetic immunity

– for all EQUIPMENT and SYSTEMS

Guidance and manufacturer´s declaration – electromagnetic immunity

The FDBP-A10BL is intended for use in the electromagnetic environment specified below. The customer or the

user of the FDBP-A10BL should assure that it is used in such an environment.

Immunity test

IEC 60601 test

level

Compliance level

Electromagnetic environment -guidance

Electrostatic

± 8 kV contact

± 8 kV contact

discharge (ESD)

± 2 kV, ± 4 kV, ±

± 2 kV, ± 4 kV, ±

IEC 61000-4-2

8 kV,± 15 kV air

8 kV,± 15 kV air

Electrostatic

transient / burst

IEC 61000-4-4

± 2 kV for power

supply lines

± 1 kV differential

Surge

mode

IEC 61000-4-5

± 2 kV common

N/A

N/A

mode

0 % UT (100 % dip in

UT) for 0,5 cycle

0 % UT (100 % dip in

UT) for 1 cycles

Floors should be wood, concrete or ceramic

tile. If floors are covered with synthetic

material, the relative humidity should be at

least 30 %. If ESD interfere with the operation

of equipment, counter measurements such

as wrist strap, grounding shall be considered.

Mains power quality should be that of a

typical commercial or hospital environment.

Mains power quality should be that of a

typical commercial or hospital environment.

Mains power quality should be that of a

typical commercial or hospital environment.

If the user of the FDBP-A10BL requires

70 % UT (30 % dip in

N/A

continued operation during power mains

UT) for 25/30cycles

0 % UT (100 % dip in

UT) for 250/300

cycles

30 A/m

30 A/m

interruptions, it is recommended that the

FDBP-A10BL be powered from an

uninterruptible power supply or a battery.

Power frequency magnetic fields should be

at levels characteristic of a typical location in

a typical commercial or hospital

environment.

Voltage dips, short

interruptions and

voltage variations

on power supply

input lines

IEC 61000-4-11

Power frequency

(50/60Hz) magnetic

field

IEC 61000-4-8

NOTE：UT is the a. c. mains voltage prior to application of the test level.

Guidance and manufacturer´s declaration – electromagnetic immunity –

for EQUIPMENT and SYSTEM that are not LIFE-SUPPORTING

Guidance and manufacturer´s declaration – electromagnetic immunity

The FDBP-A10BL is intended for use in the electromagnetic environment specified below. The customer or the

user of the FDBP-A10BL should assure that it is used in such an environment.

Immunity test

IEC 60601 test

Compliance level

Electromagnetic environment - guidance

level

Portable and mobile RF communications

equipment should be used no closer to any

part of the FDBP-A10BL, including cables,

than the recommended separation distance

calculated from the equation applicable to

the frequency of the transmitter.

Recommended separation distance:

Conducted RF

3 Vrms

3V

IEC 61000-4-6

150 kHz to 80 MHz

150 kHz to 80 MHz

6 V in ISM and

6 V in ISM and

amateur radio

amateur radio

bands between 0,15

bands between 0,15

MHz and 80 MHz.a

MHz and 80 MHz.a

Radiated RF

10 V/m

10 V/m

IEC 61000-4-3

80 MHz to 2.7 GHz

80 MHz to 2.7 GHz

80 MHz to 800 MHz

800 MHz to 2.7 GHz

385MHz-5785MHz

385MHz-5785MHz

where p is the maximum output power rating

Test specifications

Test specifications

of the transmitter in watts (W) according to

for ENCLOSURE

for ENCLOSURE

the transmitter manufacturer and d is the

PORT IMMUNITY to

PORT IMMUNITY to

recommended separation distance in metres

RF wireless

RF wireless

(m).

communication

communication

Field strengths from fixed RF transmitters, as

equipment (Refer

equipment (Refer

determined by an electromagnetic site

to table 9 of IEC

to table 9 of IEC

survey,b should be less than the compliance

60601-1-2)

60601-1-2)

level in each frequency range.c

Interference may occur in the vicinity of

equipment marked with the following

symbol:

Proximity magnetic

30 kHz ，CW，8A/m

N/A

The FDBP-A10BL does not contain

fields

（This test is

IEC 61000-4-39

applicable only to

magnetically sensitive components.

ME EQUIPMENT

and ME SYSTEMS

intended for use in

the HOME

HEALTHCARE

ENVIRONMENT）

134,2 kHz ，Pulse

modulation 2,1

kHz

65 A/m

13,56 MHz Pulse

modulation 50 kHz

7,5 A/m

NOTE 1 At 80 MHz and 800 MHz, the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic is affected by absorption and

reflection from structures, objects and people.

a The ISM (industrial, scientific and medical) bands between 150 kHz and 80 MHz are 6,765 MHz to 6,795 MHz;

13,553 MHz to 13,567 MHz; 26,957 MHz to 27,283 MHz; and 40,66 MHz to 40,70 MHz. The amateur radio bands

between 0,15 MHz and 80 MHz are 1,8 MHz to 2,0 MHz, 3,5 MHz to 4,0 MHz, 5,3 MHz to 5,4 MHz, 7 MHz to 7,3

MHz, 10,1 MHz to 10,15 MHz, 14 MHz to 14,2 MHz, 18,07 MHz to 18,17 MHz, 21,0 MHz to 21,4 MHz, 24,89 MHz

to 24,99 MHz, 28,0 MHz to 29,7 MHz and 50,0 MHz to 54,0 MHz.

b Field strengths from fixed transmitters, such as base stations for radio (cellular/cordless) telephones and land

mobile radios, amateur radio, AM and FM radio broadcast and TV broadcast cannot be predicted theoretically

with accuracy. To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site

survey should be considered. If the measured field strength in the location in which theFDBP-A10BL is used

exceeds the applicable RF compliance level above, the FDBP-A10BL should be observed to verify normal

operation. If abnormal performance is observed, additional measures may be necessary, such as

re_x005f_x005f_x005f_x005f_x005f_x005f_x005f_x005f_x005f_x005f_x005forienting or relocating theFDBP-A10BL.

c Over the frequency range 150 kHz to 80 MHz, field strengths should be less than 3V/m.

Recommended separation distances between portable and mobile

RF communications equipment and the EQUIPMENT or SYSTEM -for EQUIPMENT and SYSTEMS

Recommended separation distances between

portable and mobile RF communications equipment and the FDBP-A10BL

The FDBP-A10BL is intended for use in an electromagnetic environment in which radiated RF disturbances are

controlled. The customer or the user of the FDBP-A10BL can help prevent electromagnetic interference by

maintaining a minimum distance between portable and mobile RF communications equipment (transmitters) and

the FDBP-A10BL as recommended below, according to the maximum output power of the communications

equipment

Separation distance according to frequency of transmitter

Rated maximum

150 kHz to 80 MHz

output of

transmitter

(W)

outside ISM and

amateur radio

bands

（m）

150 kHz to 80 MHz

in ISM and amateur

80 MHz to 800 MHz

800 MHz to 2.7 GHz

radio bands

0.01

0.1

1

10

100

N/A

N/A

N/A

N/A

N/A

0.2

0.63

2

6.32

20

0.035

0.11

0.35

1.1

35

0.07

0.22

0.7

2.21

70

For transmitters rated at a maximum output power not listed above the recommended separation distance d in

metres (m) can be estimated using the equation applicable to the frequency of the transmitter, where P is the

maximum output power rating of the transmitter in watts (W) according to the transmitter manufacturer.

NOTE 1 : At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.

NOTE 2 : These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption

and reflection from structures, objects and people.

Famidoc Technology Co., Ltd.

Add.: No. 212 Yilong Road, Hexi Industrial Zone,Jinxia, Changan Town, Dongguan 523853, Guangdong

Province, P.R. China.

Tel.: +86-769-89272488

Website: www.famidoc.com

Name: Shanghai International Holding Corp. GmbH (Europe)

Add: Eiffestrasse 80, 20537 Hamburg, Germany

PN:

Description Version: V1.0

Revision date: April 2022



 

 

 

 

 

 

 

 

 

 

背面镭雕

K 80

注：型号根据实际变化

Model:

共用的型号

FDBP-A8/FDBP-A8B/FDBP-A8T/FDBP-A8BT

FDBP-A10/FDBP-A10B/FDBP-A10T/FDBP-A10BT

注：以下信息根据实际变化

(cid:31)(cid:30)(cid:31)(cid:28)(cid:30)(cid:30)(cid:30)(cid:30)(cid:30)(cid:30)(cid:27)

流水号

根据型号变化

例如

FDBP-A8BT : (cid:31)(cid:30)(cid:31)(cid:25)(cid:24)(cid:28)(cid:30)(cid:30)(cid:30)(cid:30)(cid:30)(cid:30)(cid:27)

生产年月

(cid:26)(cid:30)(cid:26)(cid:26)(cid:28)(cid:30)(cid:29)

Upper Arm Blood

Pressure Monitor

Model: FDBP-A10BL

IP classification: IP21

Power source: 3.7V rechargeable lithium

battery

Manufacturer: FAMIDOC TECHNOLOGY CO.,LTD

Shelf Life: Five years

FCC ID:PONFDBP

10BL(cid:28)(cid:30)(cid:30)(cid:30)(cid:30)(cid:30)(cid:27)

(cid:26)(cid:30)(cid:26)(cid:26)(cid:28)(cid:30)(cid:29)

WARNING

DO NOT adjust medication

based on measurement

results from this blood

pressure monitor. Take

medication as prescribed

by your physician.

The monitor is not

intended to for newborns.

This device complies with part 15 of the FCC

Rules. Operation is subject to the following two

conditions:

(1)this device may not cause harmful

interference, and

(2)this device must accept any interference

received, including interference that may

cause undesired operation

表单编号:QR-09-001 B/0



 

 

Antenna

describe

1.Antenna

describe:

Antenna

plate

Monoploe

antenna

Make name/model

name

FDAC4110

Antenna

gain

OdBi

Frequency

range

2.4GHZ-2.483GHZ

type

Connector

direct

Location

of

Famidoc Technology

Co., Ltd.

mearement(company

name)

2.External

view drawing:

Picture

of antenna

U

i

IE

8

飞

0"1

WlII

Q

co

·g

—

10.40mm 三

§L厂

＄厂

ci

乓

：

0.50Illlll

|

y

J

O

:

5.50Illlll l

mI

mm

75

50

0

3.Antenna Radiation

Pattern

Radiation

pattern@2.402GHZ

k

Total Pea

Gain:-0.475dbi

Phi I。 I45 I go I 135 180 235 270 315

-o.1 I -o. 3 I -o. 8 I -o. 5 I -o. 2 I -o. 6 I -o. 8 I -o. 5

Radiation pattern@2.441GHZ

k

Total Pea

Gain:-0.275dbi

Phi I。 I45 I go I 135 180 I 235 270 315

。 -o.1 I -o. 3 I -o. 6 I -o. 1 I -o. 2 I -o. 6 I -o. 4

Radiation

pattern@2.480GHZ

k

Total Pea

Gain:-0.237dbi

Phi 。 45 90 135

。 -0. 1 -0.2 -0.5

180 235 270 315

。 -0.3 -0.6 -0.2

Gain



 

 

Famidoc Technology Co., Ltd. Agent Authorization Letter 2022-08-01 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: LETTER OF AGENT AUTHORIZATION To Whom It May Concern:

We, the undersigned, hereby authorize (The Hong Kong Standards and Testing Centre Limited) to act on our behalf in all matters relating to application for equipment authorization, including the signing of all documents relating to these matters. We also hereby certify that no party to the application authorized hereunder is subject to the denial of benefits, including FCC benefits, pursuant to Section 5301 of the Anti-Drug Abuse Act of 1988, 21 U.S.C.853(a). This agreement expires one year from the current date. Sincerely, Print name: Reanny wang Title: Vice General Manager Signature:

 

 

Famidoc Technology Co., Ltd. Long Term Confidentiality Request Letter Date: 2022-08-01 Eurofins Electrical and Electronic Testing NA, Inc. 914 W. Patapsco Avenue Baltimore, MD 21230 USA RE: CONFIDENTIALITY REQUEST FOR EUT NAME: Arm Blood Pressure Monitor/Automatic Wireless Smart Blood Pressure Monitor MODEL: FDBP-A10BL FCC ID: PONFDBP To Whom It May Concern:

This letter serves as an official request for confidentiality under sections 0.457 and 0.459 of CFR 47. We have requested that the (block diagram/schematics/PCB /operational description ) required to be submitted with this application be permanently withheld from public review. The above documents are company proprietary information that could never get into the possession of your competition. Please contact me if there is any information you may need. Sincerely, Print name: Reanny wang Title: Vice General Manager Signature:

 

 

To : STC (Dongguan) company Limited DECLARATION OF IDENTITY Hereby we:

Famidoc Technology Co.,Ltd.

(Name of Manufacturer) Basic Model Number: FDBP-A7BL. FDBP-A10BL Basic Brand Name: FAMIDOC Basic Product Name: Am Blood Pressure Monitor

/Automatic Wireless Smart Blood Pressure Monitor Basic Test Report Application Number:

Declare the Circuit, PCB Layout, Electrical Parts and Outlook of the following product(s) are identical to the basic model:

Ei New /_] Additional Model Number(s): eppp-47, FDBP-A7L, FDBP-A7B. FDBP-A7T. FDBP-A7LT, FDBP-A7BT. FDBP-A7BLT. FDBP-A8. FDBP-A8L. FDBP-A8B. FDBP-A8BL. FDBP-A8T. FDBP-ASLT. FDBP-A8BT. FDBP-A8BLT. FDBP-A9, FDBP-A9L. FDBP-A9B. FDBP-A9BL. FDBP-A9T. FDBP-ASLT. FDBP-A9BT. FDBP-A9BLT. FDBP-A10. FDBP-A10L. FDBP-A10B, FDBP-A10BL. FDBP-A10T, FDBP-A10LT. FDBP-A10BT. FDBP-A10BLT 1 New /[] Additional Brand Name(s): Fayapoc

{2 New/(] Additional Product Name(s): Arm Blood Pressure Monitor

/Automatic Wireless Smart Blood Pressure Monitor Except the following(s) :

Remarks; FDBP-A7, FDBP-A7L. FDBP-A7B. FDBP-A7BL. FDBP-A7T. FDBP-A7LT. FDBP-

A7BT. FDBP-A7BLT. FDBP-A8. FDBP-A8L. FDBP-ASB. FDBP-A8BL. FDBP-AST. FDBP-A8SLT. FDBP-A8BT. FDBP-A8BLT. FDBP-A9, FDBP-ASL. FDBP-A9B. FDBP-

ASBL. FDBP-AST, FDBP-A9LT. FDBP-A9BT. FDBP-A9BLT. FDBP-A10. FDBP-

AI0L. FDBP-A10B. FDBP-A10BL. FDBP-A10T, FDBP-A10LT, FDBP-Al0BT. FDBP-

ALOBLT are consistent in key components, working principle, basic function, performance index, expected use, printed circuit diagram and ,power supply and function configuration. Thexefore, LED sigplay sP-A7BL and LCD display FDBP-A1OBL were selected as the main inspection models for the whole project inspection. Signature with

(AR RH) Printed Name DATE:

Updated on 2005/02007 by Kally Chan main inspection models Coverage model model FDBP-A7BL FDBP-A7 FDBP-A7L FDBP-A7B FDBP-A7T FDBP-A7LT FDBP-A7BT FDBP-A7BLT Power Rechargeable 3.7V lithium battery 4*AAA Same 4*AAA 4*AAA Same 4*AAA Same source /USB 5V battery battery battery battery

/USB 5V /USB 5V /USB 5V /USB 5V Number of keys Three Same Same Same Two Two Two Two Display module LED (No backlight) Same Same Same Same Same Same Same Display size 130*41 mm Same Same Same l Same Same Same Same

(length* width) Machine size 153*101*45 mm Same ij Same Same Same

(length * width *

height) circuit structure It is mainly composed of power supply Same Same Same Same circuit, control circuit, display circuit, L measurement circuit Key component Pressure sensor, cuff, CPU, air pump, air valve | Same Same Same Same Performance measuring range : Same Same Same Same difference systolic pressure: 8%33.3kPa (60~250mmHg ) diastolic pressure : 4~26kPa(30~195mmHg) Pulse: 40-199 times/min accuracy :

static pressure : + 3mmHg (+ 0.4kpa) Pulse: within +5% of the reading

| main inspection models Coverage model model FDBP-A7BL FDBP-A8& FDBP-A8L FDBP-A8B FDBP-A8BL FDBP-A8T FDBP-A8LT FDBP-A8BT FDBP-A8BLT Power Rechargeable 3.7V lithium battery 4* AAA Same 4*AAA Same A*AAA Same 4*AAA Same source /USB 5V battery battery battery battery

/USB 5V /USB 5V /USB 5V /USB 5V Number of keys Three Same Same Same Same Two Two Two Two Display module LED (No backlight) Same Same Same Same Same Same Same Same Display size 130*41 mm Same Same Same Same Same Same Same Same

(length* width) Machine size 153*101*45 mm Same Same Same Same Same Same Same Same

(length * width *

height) circuit structure It is mainly composed of power Same Same Same Same Same Same supply circuit, control circuit, display circuit, measurement circuit Key component Pressure sensor, cuff, CPU, air pump, Same Same Same Same Same Same air valve Performance measuring range : Same Same Same Same Same Same difference systolic pressure: 8~33.3kPa

(60~250mmHg) diastolic pressure :

(30~195mmbg ) Pulse: 40-199 times/min 4~26kPa accuracy :

static pressure : + 3mmHg

(+ 0.4kpa) Pulse: within +5% of the reading main inspection models Coverage model

model FDBP-A10BL FDBP-A9 FDBP-A9SL FDBP-A9B FDBP-A9BL FDBP-AST FDBP-A9LT FDBP-A9BT | FDBP-A9BLT Power Rechargeable 3.7V lithium battery 4*AAA Same 4*AAA Same | 4*AAA Same 4*AAA Same source /USB 5V battery battery battery battery

/USB 5V /USB 5V /USB 5V /USB 5V Number of keys Three Same Same Same Same Two Two Two Two Display module LCD (backlight) Same Same Same Same Same Same Same Same Display size 123*30 mm Same Same Same Same Same Same Same Same

(length* width) Machine size 153*101*50 mm Same Same Same Same Same Same Same Same

(length * width *

height) circuit structure It is mainly composed of power Same Same Same Same Same Same supply circuit, control circuit, display circuit, measurement circuit Key component Pressure sensor, cuff, CPU, air pump, Same Same | Same Same Same Same air valve Performance measuring range : Same Same Same Same Same Same difference systolic pressure: 8~33.3kPa

(60~250mmHg ) diastolic pressure : 4~26kPa

(30~195mmHg ) Pulse: 40-199 times/min accuracy :

static pressure : + 3mmHg

(+ 0.4kpa) Pulse: within +5% of the reading main inspection models Coverage model

(60~250mmHg) diastolic pressure :

(30195mmHg) Pulse: 40-199 times/min 4~26kPa accuracy :

static pressure : + 3mmHg

(+ 0.4kpa) Pulse: within +5% of the reading model FDBP-A10BL FDBP-A10 FDBP-A10L FDBP-A10B FDBP-A10T FDBP-A10LT FDBP-A10BT FDBP-A10BLT Power Rechargeable 3.7V lithium battery 4*AAA battery | Same 4*AAA battery | 4*AAA battery | Same 4*AAA battery | Same source /USB 5V /USB 5V /USB 5V /USB 5V /USB 5V Number of keys Three Same Same Same Two Two Two Two

| Display module LCD (backlight) Same Same Same Same Same Same Same Display size 123*30 mm Same Same Same Same Same | Same

(length* width) Machine size 153*101*50 mm Same Same Same Same Same Same

(length * width *

height) circuit structure It is mainly composed of power Same Same Same Same Same supply circuit, control circuit, display circuit, measurement circuit Key component Pressure sensor, cuff, CPU, air pump, Same Same Same Same Same air valve Performance measuring range : Same Same Same Same Same difference systolic pressure: 8%33.3kPa

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Medical pulse WIFI

IC planning

Draftsman：Chen Jiale

version： V1.1.1

date ： 2022-04-14

formula

te

Auditing

sanctio

n

Old file

processin

g

Revision experience

version

Revised content

V1.0.0

First planning

V1.0.1

Change some details after communicating

with Boxin

V1.0.2

Increase the WIFI AP functionality

V1.0.3

Fixed a MAC definition

V1.0.4

Add UUID recognition Bluetooth and AT command

acquisition status

V1.0.5

Invalid update requirement due to the IIC

V1.0.6

Update the schematic and add WIFI / BLE to enable

control

V1.0.7

Add a WIFI communication port description

V1.0.8

Correct current parameters, protocol AT + instruction

return format

V1.0.9

Add a data transfer description

V1.1.0

Add WIFI read MAC address and modify name

function

V1.1.1.

Adjust the schematic pin naming

V1.1.2

Modify product reference graphs and template

dimensions

Bluetooth specifications： Bluetooth 5.1

WIFI : 802.11n

IC： BL2028 QFN32

The WIFI module name：FDAC4110

Product reference circuit：

Footposition instructions （ See the lower right corner of

the circuit diagram）：

order

numbe

foot position

IC foot

position

1

2

3

4

WIFI_ACTIVE

P7

BLE_ACTIVE

P8

AP_CEN

P9

BLE_TX

P11

mold

function declaration

other

O

O

I

O

WIFI connection status

0 - not connected

1 - connected

BLEconnection status

0 - not connected

1 - connected

WIFI mode selection

0 - STA

1 - AP

UART communication

TX

Compatible with

burning mouth

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

BLE_RX

RST

VCC

GND

IO_0

IO_1

IO_2

IO_3

IO_4

IO_5

IO_6

IO_7

BLE_CEN

P10

RST

/

/

P14

P15

P16

P17

P20

P21

P24

P26

P22

WIFI_CEN

P23

ANT

ANT

I

/

/

/

O

O

O

O

O

O

O

O

O

I

/

Compatible with

burning mouth

UART communication

RX

Reset the foot, and the

low level is effective

Power input pin

power ground

Controlled output port

The default low level

BLE Enable end

1 - BLE open

0 - BLE close

WIFI Enable end

1 - WIFI open

0 - WIFI close

Antenna mouth

The suspension is

high level

The suspension is

high level

Electrical parameter requirements：

order

numbe

1

2

3

project

supply voltage

Sleep current

work environment

demand

2.1~3.6

≤ 10

-20~70

unit

other

V

uA

℃

3.8uA

The WIFI block parameters：

order

numbe

1

2

3

4

5

6

project

demand

working

frequency

transmitting

power

working

current

receiving

sensitivity

Standby

current

peak current

2412~2484

13~15

≤100

≤-70

≤100

≤200

BLE, the block parameter：

unit

MHz

dBm

mA

dBm

mA

mA

other

non-tunable

（75 mA）

Bluetooth function

turned off（75mA）

order

numbe

1

2

3

2

3

4

5

6

7

project

demand

frequency

receiving

sensitivity

transmitting

power

Radio gap

Minimum

connection gap

Maximum

connection gap

Connection

timeout

Standby current

Receiving /

transmitting

current

2402~2480

≤ -94

0

100

10

10

5

≤35

≤45

Communication requirements：

UART communication：

order

number

1

2

3

project

Baud rate

check bit

stop bit

demand

57600

none

1

other

unit

Mhz

dBm

dBm

Automatic adjustable

ms

ms

ms

s

mA

mA

unit

Bit/S

bit

The WIFI

functionality is turned

off（25mA）

bluetooth connection

（31 mA）

other

Modifiable (by

default)

Bluetooth protocol description (APP interface)：

Bluetooth Service UUID:0000feef-0000-1000-8000-

00805f9b34fb

UUID

Handle

attribute

0xFF01

0xFF02

notify

Write

Byte

number

The longest

single

package517

The longest

single

package517

remarks

Data entered from the serial port RX will

generate a notification to the mobile

device in this channel

Data written by the APP is output from

the serial port TX

0xFF03

0xFF04

0xFF05

0xFF07

0xFF08

0xFF09

0xFF0A

0xFF0B

0xFF0C

0xFF0D

0xFF0E

0xFF0F

Write

longest9 Module broadcast name

Read

6

0x01

Read

0x02

Write

0xFF06

Read

2

2

Write

Module MAC address

Address coding format see attachment

Set the serial port port rate：（default

57600）

0： 4800 bps

1： 9600 bps

2： 19200 bps

3： 38400 bps

4： 57600 bps

5： 115200 bps

Read the module software version（3 个

Byte：000000）

0xAA，0x55: factory data reset

other： invalid instruction

Restore content： Name, wifi memory

Write

longest32 Write to the WIFI SSID

Write

longest32 Write to the WIFI password

Read

1

Query distribution status

0 - Distribution network failure

1 - Distribution network success

2 - wrong password

HTTP Server IP

HTTP Server PORT

The HTTP Server URL

1

2

Gets the server connection status

0 - not connected

1 - Connection success

Specifies the IO port status

High byte-IO port serial number (Start

with 0x00)

Low byte-IO port status 0x00 - output

low level 0x01 -Output high level

Write

Write

Write

Write

\Read

0x01

Read

0x02

Write

The server does the user management ， The WIFI module

uploads the MAC to the server for identification

WIFI protocol specification：

STA pattern：

WIFI distribution network ： The BLE distribution network is

adopted for the first time, establish the connection with BLE, and

then input the SSID and password of the target AP, after the

configuration, the module automatically connects to the AP, after

each wifi boot automatically connected, with memory saving function,

only one set of WIFI information is saved.

Save the relevant information after the successful network connection,

and automatically connect the save network every time you boot on

WIFI configure：

When the product is connected to the wifi, the module can be

configured through the mobile phone. The configuration information is

as follows:

UDP protocol

Configure the port：6090

Configuring commands：

data head: fixed 0x18

instruct - To the objects to be read or sent

instruction

00

-

character

Representative write / send

Representative

read

01

-

record - When read, data bits are not, only sending instructions

and operators When written / sent, data bits are used to

indicate content to be given

data head instruct instruction

remarks

record

（byte）

Directive

exporter

0x18

0x18

0x18

0x18

0x18

0x18

0x03

0x04

0x05

character

0x01

0x00

0x01

0x00

0x01

0x06

0x00

longest9

APP

/

6

/

1

/

APP

module

APP

APP

APP

Change the module

broadcast name

Module MAC address

Address coding format

see attachment

Set the serial port port

rate：（default57600）

0： 4800 bps

1： 9600 bps

2： 19200 bps

3： 38400 bps

4： 57600 bps

5： 115200 bps

Read the module

software version

0x18

0x18

0x01

0x07

0x01

3

2

module

APP

（APPRead the data：

000000）

0xAA ， 0x55: factory

data reset

Other:invalid instruction

Restore content：Name,

wifi memory

WIFI Penetrate：

When the product has data transmitted to the module via the UART

(non-AT command data), the wifi module proactively transmits the data

to the server

AP Penetrate mode：

In the AP mode, the APP is directly connected to the WIFI

module, and the product data is directly transmitted to the APP

through the wifi

Serial port of communication：35000

The WIFI gets the information from the server / APP：

1、Internet Time (only valid after the product time is issued by the product order)

2、User data (voice, control instructions, etc.)

3、OTA upgrade（Users upgrade the WIFI through the APP）（Specialized OTA software, which the APP does not need to

do）

functional

description

data head

（data[0]）

port

OTA

function

6090

Inform the

device to

start the

OTA

Equipment

feedback on

the OTA

progress

directive

（data[1]）

0x38 (Start

of OTA)

Content

（data[2]）

For example, as

0x64 (100), the

data [3] ~data

[3 + 100-1] is

in the json

range

Like 0x05 (5),

indicates data

[3] ~data [3 +

5-1]

persist

（data[3]

）

persist

（data[4]）

persist

（data[5]）

Accumulation

and check

（data[6]）

Content of json such as: {"url": "http: /

/ 192.168.1.1:8090 / ota_file"}

According to the

calculation

In

progress,

bit7:1 OTA

bit6~bit0:

OTA%

data[4]

persist

data[5]

persist

data[6]check

0x17

0x17|0x80

0x39 (ota

progress

report)

Query device

version

number

0x27

Report the

equipment

version

number

0x27|0x80

0x38

0x39

Like 0x05 (5),

indicates data

[3] ~data [3 +

5-1]

As in 0x64

(100), it

indicates that

data [3] ~data

[3 + 100-1]为

json 范围

data[3]pers

ist

data[4]

persist

data[4]

persist

According to the

calculation

The json content is something like:

{"version": "FW-20210125-V001"}

According to the

calculation

The data format of the communication is as follows: "Device MAC address" + "Device type" + "Command character" +

"Transtransmission data", in Json format"MAC":"XXXXXXXXXXXX",

"TYPE":"…",

"CMD":"…",

"VALUE":"…………",

}

 protocol ：HTTP

Module protocol description (product interface)

The string starting with "AT +" is resolved and executed as an AT

instruction and returned from the serial port, followed by additional

output execution results, "AT + OK" or "AT + ERR" or "AT + (return

information)", etc.Serial packets that do not start with "AT +" will

be treated as transmission data.

Content

bytes

9

2

0

0

0

0

0

3

instruction

character

REN=xxxxxxxx

x

PTY=xx

BSW

RSV

RBS

RWS

RIO=GPIOxx

SIO=GPIOxx,x

WLMAC

attribute

remarks

Write

Write

Module naming(This is the Bluetooth and WIFI

name)

product type（Need to be put in the broadcast to

the APP identification, or server data）

ET - electronic thermometer

IR - Infrared thermometer

BP - tonometer

ES - Physical therapy instrument

Other reserved

Read the module software version

Returns the data, AT + XXXXXX（Three-gear

module version）

Gets the server connection status（Effective only

for the WIFI）

bridging order：

AT+HOST OK

AT+HOST ERR

Gets the BLE connection status

bridging order：

AT+BLE OK --BLE linkage OK

AT+BLE ERR--The BLE connection was

unsuccessful

Gets the WIFI connection status

bridging order：

AT+WIFI OK --WIFI linkage OK

AT+WIFI ERR --WIFI connection unsuccessful

Gets the IO port output status

xx - IO mouth serial number

Return data：

AT+GPIOxx，x

Change the IO port status

xx - IO mouth serial number

x - IO port level 0-low level

1-High power level

Read the module MAC address

Return data：

Read

Read

Read

Read

Read

Write

Read

AT+WLMACxxxxxxxxxxxx

（xxxxxxxxxxxxFor hexadecimal numbers）

failure：AT+ERR

Send the data to the server（Return data）

Write

HTTP_POST=x

xxxxxxxxxxxxx

x

(The x table is

the data)

example：AT+REN=FDIR8001 Module naming：FDIR8001

The above settings require power-off storage

Other requirements：

Account management：

1 、 Each module has a separate MAC address for later server account

management discrimination

2、OTA upgrade

3 、 Information required in the broadcast: module name, device type,

service UUID (0xFEEF)

4 、 When both BLE and WIFI are connected, if BLE is APP connection,

transfer data from BLE is preferred, if BLE is other connection (such

as network connection), select transmission from WIFI

5、WIFI Default name FD_WIFI,Bluetooth default name FD_BLE

data transmission ：

1、 Directive package length：

BLE：Short bag≤32 Byte，Long bag≤517 Byte；

WIFI：most 1460 Byte；

2、 Data transmission mechanism：

After the Bluetooth data transmission, more than 100ms did not

receive the data transmission to re-enter the low power

consumption state。

During the data transmission process, if the data is not received

within 20ms, no longer wait, and the data is sent directly, used

to judge each instruction node。

Burning configuration：

WIFI name, Bluetooth name, port rate。

Attached a： The MAC address information is as follows：

The MAC address should contain the content： XX XX XX XXXXXX

first XX：tatted code

the second XX：A high 4bit means year + 2015, for example a high four

digits of 6 represents 2021

Low 4bit indicates the month

The third XX： date

The last three XXXXXX：serial number

Module size：

thickness0.8MM