FCC ID: 2APPZ-AP6256 IP Phone

Language setting 1. Enter #*107 to go to the menu page > Basic > Language. 2. Select the desired language and press OK soft key. Accepting a call 1. Using the handset: pick up the handset. 2. Using the handsfree: press . Redial 1. Press key, redial a call number. Putting a call on hold 1. Press Hold soft key, caller is put on hold. 2. To retrieve the call press Resume soft key. Note: with more than one active call, select desired call with the navigator key and use the corresponding soft key to hold or resume. Voice mail 1. To access your voice mailbox, press or Enter #*107 to go to the menu page > Message > Voice Message, number of messages will be indicated if provided by your server or pbx. Select the line and press Play to call . Bluetooth 1. Enter #*107 to go to Menu > Basic > Bluetooth. 2. Press OK to enter the Bluetooth enabling screen. After enabling the screen, press Scan to display the list of scanned Bluetooth devices. (Press "More" to select softkey functions, Return, Down, Scan and Link) WiFi 1. Enter #*107 to go to Menu > Basic >WLAN. 2. Press "OK" to enter the wireless network opening screen, and then press "Scan".The list of scanned radios is displayed.

(Select "Return", "Scan", "Down" and "OK" through "More"). 3. Access an available network, select a wireless network,

(Select "Down", "Connect", "Unlink","Return","Detail" and input method through "More"). Call forward Call list 1. Enter #*107 to go to the menu page > Features > Call Forward. 2. Select the line, the type of forward, enter the destination number and status, and press OK soft key. 1. Press the CallLog softkey or enter #*107 to go to the menu > CallLog >Local Call Logs. 2. Scroll through the list through the / soft key. 3. To dial an entry, pickup handset or press . Do not disturb Phonebook 1. Or Enter #*107 to go to the menu page > Features > DND, and select the Mode and Type, and press OK key. Access Phonebook:

Programmable keys 1. You can congure shortcuts for the programmable keys. 2. Enter #*107 to go to the menu page > Basic > Keyboard, select among the congurable items, and select your desired type and value, press OK key. 1. Press Contact soft key or Enter #*107 to go to the menu page > Contact > Local Contacts. 2. Select All Contacts or other group. 3. To dial an entry, press Dial soft key or pickup handset or press . Add new entry:

1. Input the IP address in the web browser. Select Phonebook > Contacts > Add new contact . 2. Enter the Name, Phone, and Ring of the new contact. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more of the following measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help. Changes or modications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC RF Exposure Warning Statements:

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment shall be installed and operated with minimum distance 20cm between the radiator & body. The frequency stability of all transmission frequencies of U-NII-1, U-NII-2A, U-NII-2C and U-NII -3 meets the 47 CFR FCC Part15.407(g) requirements, and the manufacturer states that their transmissions remain within the U-NII-1, U-NII-2A, U-NII-2C and U-NII -3 bands. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA.On the bottom of this equipment is a label that contains,among other information, a product identier in the format US: 3I1IPNANAP6256 .If requested, this number must be provided to the telephone company. Fanvil Technology Co., Ltd Website: www.fanvil.com EMail: sales@fanvil.com support@fanvil.com Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Add: 10/F Block A, Dualshine Global Science Innovation Center, Honglang North 2nd Road, Bao'an District, Shenzhen, China

- 4 -

V0.3 X305 Quick Installation Guide Fanvil Technology Co., Ltd www.fanvil.com Packaging list IP Phone Handset Cord Ethernet Cable Quick Installation Guide Contact Card*8pcs Handset Stand Power Adapter

(Optional) Wall Stand

(Buy separately) Screen icon In hands-free mode Call Forward activated New VM Messages Internet connected In headset mode Do not disturb activated (Red) Voice quality level of call In handset mode SIP Hotspot activated Keypad locked Mute activated VLAN activated Forward call(s) Silent mode VPN activated Missed call(s) Internet is disconnected X

No IP address Wireless network connected Wireless network disconnected Call is on hold Auto-answering activated Keys features Bluetooth device paired connection SMS New SMS Received call(s) Wireless network failure Dialed call(s) Voice message key HELP key Image DSS keys Soft keys Redial key, access to redial the last record Message waiting indicator Hand-free key, activate/

deactivate hands free Installation the device Please follow the instructions in below picture to install the device. Bracket desktop installation In idle mode or during ringing:

increase or decrease ringer volume In communication:

increase or decrease handset, headset or hands-free volume Turn the left (-) right (+) page under the menu page Press and hold # to enter the status bar to view the IP address

- 2 -

Wall mount (Wall Stand need buy separately) Conguration Conguration via LCD menu of phone 1. Enter #*107 to go to the menu page > System

(default password 123) ,Select "Delete", "OK", "Return" and input method through "More". 2. Select Network: To congure the Network Settings

(IPv4/IPv6/IPv4&IPv6, DHCP/Static/PPPoE). 3. Select Accounts: To congure enable the account, ll the SIP server address, port, user name, password etc. 4. Save the conguration. Conguration via web 1. Get the IP address from the phone: Press and hold # to enter the status bar to view the IP address 2. Login: Input the IP address in the web browser. The PC and phone should be in the same IP address segment (The default username and password are both admin). 3. Congure: Select network/account etc, and ll the relevant content. 4. Save the conguration. Image DSS key for card mounting Buckle the Contact card cover from the groove at the top and bottom. Image DSS key configuration Connecting to the Device Please connect power adapter, network, PC, handset, and headset to the corresponding ports as described in below picture. USB port: connect USB device (USB ash disk). Power port: connect the power adapter. Network port: connecting local area network or internet. PC port: the network port connect to the computer. Headset port: connect headset. Handset port: connect IP Phone handset. Conguration via LCD menu of phone 1. Select any image DSS key 2. Set the type to Memory Key 3. Enter a contact Name and Tel 4. Press Conrm to retain the conguration Conguration via web 1. Get the IP address from the phone: Press and hold # to enter the status bar to view the IP address. 2. Login: Input the IP address in the web browser. The PC and phone should be in the same IP address segment

(The default username and password are both admin). 3. Conguration: Select Function Key > Side key, set the type to Memory Key, and ll in the relevant information

(The default Subtype is Speed Dial ). 4. Save the conguration. HELP key configuration 1. Get the IP address from the phone: Press and hold # to enter the status bar to view the IP address 2. Login: Input the IP address in the web browser. The PC and phone should be in the same IP address segment

(The default username and password are both admin). 3. Conguration: Select Function Key > 433, set the type to Dial number or Ring, then click Binding. You need to press the KT20(transmitter module need buy separately) during the conguration process. Then the phone and the transmitter will be automatically connected, and the Addr ID of the transmitter will be automatically matched on the web page. 4. Enter the number you want to call as the value and click Apply. 5.Press the KT20 and the X305 will ring or dial automatically. Making a call 1. Pre-dialing: enter the phone number and pick up the handset. 2. Direct dialing: lift the handset and enter the phone number. 3. Handsfree: enter phone number and press or vice versa. 4. Specify contact dialing:Press the specied Image DSS Key

- 3 -

to select the contact.

Fanvil Model:X305 This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received;

including interference that may cause undesired operation. RevB Input:5V= 2A or PoE 48V==0.3A US:3I1IPNANAP6256 FCC ID:2APPZ-AP6256 Complies with 47 CFR Part 68 Pl a rO}

Innovation Center, Honglang North 2nd Road, Bao'an District, Shenzhen, China wwwfamvilcom Made in China 34.8X36.8mm

Fanvil Technology Co., LTD. 10/F Block A, Dualshine Global Science Innovation Honglang North 2nd Road, Bao'an District, Shenzhen, China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07-07-2023 Ref: Attestation Statements Part 2.911(d)(5)(i) Filing FCC ID: 2APPZ-AP6256

[Fanvil Technology Co., LTD.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Sincerely,

(Applicant signature)

(Mengjiao Hu )

Fanvil Technology Co., LTD. 10/F Block A, Dualshine Global Science Innovation Honglang North 2nd Road, Bao'an District, Shenzhen,China Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 07-07-2023 Ref: Attestation Statements Part 2.911(d)(5)(ii) Filing FCC ID: 2APPZ-AP6256

[Fanvil Technology Co., LTD.] (the applicant) certifies that, as of the date of the filing of the application, the applicant is not identified on the Covered List as an entity producing covered equipment. Sincerely,

(Applicant signature)

(Mengjiao Hu )

Fanvil Technology Co., LTD. 10/F Block A, Dualshine Global Science Innovation Honglang North 2nd Road, Bao'an District, Shenzhen, China Section 2.911(d)(7) USA Agent for Service of Process FCC ID: 2APPZ-AP6256 2.911(d)(7) USA Designated Agent for Service of Process We, [Fanvil Technology Co., LTD.] (the applicant) designate [ABP International, Inc.] NOTE1 for the purpose of accepting service of process on behalf of the applicant. Applicant consent: We Acknowledge our consent to accept service of process in the United States for matters related to the applicable equipment, and at the physical U.S. address and email address of the designated agent and acknowledge our acceptance of our obligation to maintain an agent for service of process in the United States for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. Agent obligation: We Acknowledge our obligation to accept service of process in the United States for matters related to the applicable equipment at our physical U.S. address and email address for no less than one year after either the grantee has permanently terminated all marketing and importation of the applicable equipment within the U.S., or the conclusion of any Commission-related administrative or judicial proceeding involving the equipment, whichever is later. USA Agent Applicant Company name: ABP International, Inc. Company name: Fanvil Technology Co., LTD. Address: 13988 Diplomat Dr. #180 Dallas, TX 75234, United States Address: 10/F Block A, Dualshine Global Science Innovation Honglang FRN: 0023377534 North 2nd Road, Bao'an District, Shenzhen, China Contact Name: Henry Castillo Contact Name: Mengjiao Hu Telephone No: (972) 831-1600 140 Telephone No: 86-0755-26402199 Email: itadmin@abptech.com Email: mengiiao.Hu@fanvil.com Signature:

Signature:

Date:

Date: July 7, 2023 NOTE 1: An applicant located in the United States may designate itself as the agent for service of process. Reference; Federal Register document 2022-28263 published on 02/06/23 https://www.federalregister.gov/documents/2023/02/06/2022-28263/protecting-against-national-security-threats-to-the-communications-supply-c hain-through-the 2.911 (d)(7)USA Agent v1.2 July 17, 2023

Fanvil Technology Co., LTD. 10/F Block A, Dualshine Global Science Innovation Honglang North 2nd Road, Bao'an District, Shenzhen,China Agent Authorization Company: Fanvil Technology Co., LTD. Address: 10/F Block A, Dualshine Global Science Innovation Honglang North 2nd Road, Bao'an District, Shenzhen,China Product Name: IP Phone Model Number(s): X305 Product Description: IP Phone We authorize MiCOM Labs Inc., 575 Boulder Court, Pleasanton, California 94566, USA, to act on our behalf on all matters concerning the certification of above named equipment. We declare that MiCOM Labs Inc. is allowed to forward all information related to the approval and certification of equipment to the regulatory agencies as required and to discuss any issues concerning the approval application. Any and all acts carried out by MiCOM Labs on our behalf shall have the same effect as acts of our own. Signature:

Name:

Mengjiao Hu Company: Fanvil Technology Co., LTD. Date: 2023-07-24

Fanvil Technology Co., LTD. 10/F Block A, Dualshine Global Science Innovation Honglang North 2nd Road, Bao'an District, Shenzhen,China Office of Engineering Technology Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Subject; Request for Confidentiality FCC ID: 2APPZ-AP6256 Date: 2023-07-07 To Whom It May Concern, Pursuant to the provisions of the Commissions rules Title 47 Sections 0.457 and 0.459, we are requesting the Commission to withhold the following attachment(s) as confidential documents from public disclosure indefinitely. These documents contain detailed system and equipment descriptions and are considered as proprietary information in operation of the equipment. The public disclosure of these documents might be harmful to our company and would give competitors an unfair advantage in the market. Schematic Diagram Block Diagram Parts List Operational Description FCC Software Security Requirements for UNII devices In additional to above mentioned documents, in order to comply with the marketing regulations in Title 47 CFR 2.803 and the importation rules in Title 47 CFR 2.1204, while ensuring that business sensitive information remains confidential until the actual marketing of newly authorized devices, we request Short Term Confidentiality of the following attachment(s);

External Photos Test Setup Photos Internal Photos User Manual For 45 days, pursuant to Public Notice DA 04-1705. OR For 180 days pursuant to KDB 726920 D01. It is our understanding that all measurement test reports, FCC ID label format and correspondence during the certification review process cannot be granted as confidential documents and this information will be available for public review once the grant of equipment authorization is issued. Sincerely _______________________________ Contact person: Mengjiao Hu

Fanvil Technology Co., LTD. 10/F Block A, Dualshine Global Science Innovation Honglang North 2nd Road, Bao'an District, Shenzhen,China FCC Software Configuration Control Declaration Date: Jul. 24, 2023 Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 USA Attn: OET Dept. Product/ Model Number: IP Phone / X305 Regarding FCC Country Code Selection guidelines identified in KDB 594280 v02r01. All applications for equipment authorization for transmitters that can have radio parameters, or other technical parameters, reported to the Commission set by software must have an attestation indicating that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. We declare that no third party will have software, or configuration control, to program the device out of compliance of the technical rules under which it has been certified. Name: Mengjiao Hu Date: Jul. 24, 2023 Signature of applicant FCC Software Configuration Control Declaration Rev1.1.docx