| all | frequencies |
|
|
|
|
exhibits | applications |
|---|---|---|---|---|---|---|---|
| manual | photos | label | |||||
| app s | submitted / available | |||||||
|---|---|---|---|---|---|---|---|---|
| 1 |
|
User manual | Users Manual | 2.22 MiB | January 13 2021 / July 12 2021 | delayed release | ||
| 1 |
|
Internal photos | Internal Photos | 835.63 KiB | January 13 2021 / July 12 2021 | delayed release | ||
| 1 |
|
External photos | External Photos | 768.36 KiB | January 13 2021 / July 12 2021 | delayed release | ||
| 1 |
|
Label | ID Label/Location Info | 186.84 KiB | January 13 2021 | |||
| 1 | Block Diagram | Block Diagram | January 13 2021 | confidential | ||||
| 1 |
|
Cover letter | Cover Letter(s) | 190.05 KiB | January 13 2021 | |||
| 1 | Operational Description | Operational Description | January 13 2021 | confidential | ||||
| 1 |
|
RF Exposure | RF Exposure Info | 136.46 KiB | January 13 2021 | |||
| 1 | Schematics | Schematics | January 13 2021 | confidential | ||||
| 1 |
|
Test report | Test Report | 5.09 MiB | January 13 2021 | |||
| 1 |
|
Test setup | Test Setup Photos | 178.72 KiB | January 13 2021 / July 12 2021 | delayed release |
| 1 | User manual | Users Manual | 2.22 MiB | January 13 2021 / July 12 2021 | delayed release |
H5W H3W User Manual
Directory
Directory .............................................................................................................................................................................. 3
1 Picture .............................................................................................................................................................................. 6
2 Table ................................................................................................................................................................................. 8
3 Safety Instruction............................................................................................................................................................. 9
4 Overview ......................................................................................................................................................................... 11
4.1 Overview ............................................................................................................................................................. 11
4.2 Packing Contents ................................................................................................................................................ 11
5 Desktop Installation ....................................................................................................................................................... 14
5.1 PoE and the use of external power adapters ............................................................................................... 14
5.2 Desktop and wall mounted method ..................................................................................................................... 15
6 Appendix Table .............................................................................................................................................................. 17
6.1 Appendix I - Icon .............................................................................................................................................. 17
6.2 Appendix II - Keyboard character query table ............................................................................................. 17
7 Introduction to the User ............................................................................................................................................ 20
7.1 Key description ................................................................................................................................................... 20
7.2 Using Handset / Hands-free Speaker .................................................................................................................. 23
7.3 Idle Screen ........................................................................................................................................................ 24
7.4 Phone Status .................................................................................................................................................... 24
7.5 Making Phone Calls ......................................................................................................................................... 26
7.6 Web Management ............................................................................................................................................ 27
7.7 SIP Configurations ........................................................................................................................................... 29
8 Basic Function ................................................................................................................................................................ 30
8.1 Answering Calls ................................................................................................................................................ 30
8.1.1 Talking ...................................................................................................................................................... 30
8.1.2 Make / Receive Second Call ................................................................................................................. 31
8.2 End of the Call ................................................................................................................................................. 32
8.3 Redial ................................................................................................................................................................ 32
8.4 Auto-Answering ................................................................................................................................................ 32
8.5 Mute ................................................................................................................................................................... 33
8.5.1 Mute the Call ........................................................................................................................................... 33
8.5.2 Ringing Mute ........................................................................................................................................... 33
8.6 Call Hold/Resume ............................................................................................................................................ 34
8.7 Call Transfer ..................................................................................................................................................... 34
8.8 Call Waiting ...................................................................................................................................................... 35
3
8.9 Anonymous Call ............................................................................................................................................... 36
8.9.1 Anonymous Call ...................................................................................................................................... 36
8.9.2 Ban Anonymous Call ............................................................................................................................. 36
8.10 Hotline ............................................................................................................................................................. 37
9 Advance Function .......................................................................................................................................................... 38
9.1 MCAST .............................................................................................................................................................. 38
9.2 MWI（Message Waiting Indicator） ............................................................................................................. 38
10 Web Configurations ................................................................................................................................................. 39
10.1 Web Page Authentication ............................................................................................................................ 39
10.2 System >> Information ................................................................................................................................. 39
10.3 System >> Account ....................................................................................................................................... 39
10.4 System >> Configurations ............................................................................................................................ 39
10.5 System >> Upgrade ...................................................................................................................................... 40
10.6 System >> Auto Provision ................................................................................................................................ 43
10.7 System >> Tools............................................................................................................................................ 46
10.8 System >> Reboot Phone ............................................................................................................................ 46
11 Network ........................................................................................................................................................................ 47
11.1 Network >> Wi-Fi Settings ............................................................................................................................. 47
11.2 Network >> Basic .......................................................................................................................................... 48
11.3 Network >> Service Port .............................................................................................................................. 49
11.4 Network >> VPN ............................................................................................................................................ 50
11.5 Network >> Advanced .................................................................................................................................. 50
11.6 Line >> SIP ..................................................................................................................................................... 51
11.7 Line >> SIP Hotspot ...................................................................................................................................... 56
11.8 Line >> Dial Plan ........................................................................................................................................... 59
11.9 Line >> Action Plan ....................................................................................................................................... 62
11.10 Line >>Call Firewall .................................................................................................. ............................. 62
4
11.11 Line >> Basic Settings ................................................................................................................................ 62
11.12 Line >> RTCP-XR ....................................................................................................................................... 63
11.13 Phone settings >> Features ...................................................................................................................... 63
11.14 Phone settings >> Media Settings ............................................................................................................ 66
11.15 Phone settings >> MCAST ........................................................................................................................ 67
11.16 Phone settings >> Action ........................................................................................................................... 68
11.17 Phone settings >> Time/Date .................................................................................................................... 68
11.18 Phone Settings >> Time Plan ................................................................................................................. 69
11.19 Phone settings >> Tone ............................................................................................................................. 69
11.20 Phone settings >> Advanced .................................................................................................................... 70
11.21 Phonebook >> Advanced .......................................................................................................................... 71
11.22 Call Log ......................................................................................................................................................... 72
11.23 Function Key >> Softkey ............................................................................................................................ 72
11.24 Security >> Web Filter ................................................................................................................................ 73
11.25 Security >> Trust Certificates .................................................................................................................... 74
11.26 Security >> Device Certificates ................................................................................................................. 74
11.27 Security >> Firewall ..................................................................................................................................... 75
11.28 Device Log >> Device Log ........................................................................................................................ 77
12 Trouble Shooting ......................................................................................................................................................... 78
12.1 Get Device System Information .................................................................................................................. 78
12.2 Reboot Device ............................................................................................................................................... 78
12.3 Reset Device to Factory Default ................................................................................................................. 78
12.4 Screenshot ..................................................................................................................................................... 78
12.5 Network Packets Capture ............................................................................................................................ 79
12.6 Get Log Information ...................................................................................................................................... 80
12.7 Common Trouble Cases .............................................................................................................................. 80
5
1 Picture
Picture 1 - Device installation .......................................................................................................................... 15
Picture 2 - Wall-mounted installation ............................................................................................................... 16
Picture 3 - Connecting to the Device .......................................................................................................... 16
Picture 4 - H5W Instruction of Keypad .......................................................................................................... 20
Picture 5 - Screen layout/default home screen ................................................................................................. 24
Picture 6 - Scroll icon .................................................................................................................................... 24
Picture 7 - The Phone status ............................................................................................................................. 25
Picture 8 - WEB phone status .......................................................................................................................... 26
Picture 9 - Open the voice channel and dial the number .................................................................................. 27
Picture 10 - Call number ............................................................................................................................... 27
Picture 11 - Landing page ................................................................................................................................ 28
Picture 12 - Web SIP registration ..................................................................................................................... 29
Picture 13 - Answering calls ............................................................................................................................ 30
Picture 14 - Talking interface ........................................................................................................................... 30
Picture 15 - The second call interface .............................................................................................................. 31
Picture 16 - Two way calling ......................................................................................................................... 32
Picture 17 - Web page to start auto-answering ................................................................................................. 33
Picture 18 - Mute the call ................................................................................................................................. 33
Picture 19 - Ringing mute ................................................................................................................................ 34
Picture 20 - Call hold interface ........................................................................................................................ 34
Picture 21 - Transfer interface .......................................................................................................................... 35
Picture 22 - Web call waiting setting ................................................................................................................ 35
Picture 23 - Web call waiting tone setting ........................................................................................................ 36
Picture 24 - Enable Anonymous web page call .............................................................................................. 36
Picture 25 - Page Settings blocking anonymous call ....................................................................................... 36
Picture 26 - Hotline set up on webpage ............................................................................................................ 37
Picture 27 - Web page firmware upgrade ................................................................................................... 41
Picture 28 - Page auto provision Settings .................................................................................................. 44
Picture 29 - Network Priority ........................................................................................................................ 47
Picture 30 - WiFi Settings ................................................................................................................................ 48
Picture 31 - Service Port Settings................................................................................................................ 49
Picture 32 -SIP hotspot ..................................................................................................................................... 57
Picture 33 - SIP hotspot server configuration ................................................................................................... 58
Picture 34 - SIP hotspot client configuration ................................................................................................... 59
Picture 35 - Dial plan settings ...................................................................................................................... 60
Picture 36 - Custom setting of dial - up rules ............................................................................................. 60
6
Picture 37 - Dial rules table (1) .................................................................................................................... 61
Picture 38 - Dial rules table (2) .................................................................................................................... 62
Picture 39 - MCAST ..................................................................................................................................... 67
Picture 40 - Tone settings on the web ......................................................................................................... 70
Picture 41 - Page screen Settings ................................................................................................................... 71
Picture 42 - Web Filter settings .................................................................................................................... 73
Picture 43 - Web Filter Table ........................................................................................................................ 74
Picture 44 - Certificate of settings................................................................................................................ 74
Picture 45 - Device certificate setting.......................................................................................................... 75
Picture 46 - Network firewall Settings ......................................................................................................... 75
Picture 47 - Firewall Input rule table ............................................................................................................ 76
Picture 48 - Delete firewall rules .................................................................................................................. 77
Picture 49 - Screenshot................................................................................................................................. 79
Picture 50 - Web capture .............................................................................................................................. 79
7
2 Table
Table 1 - Hardware Interface Description ........................................................................................................ 16
Table 2 - Keypad Icons.................................................................................................................................. 17
Table 3 - Look-up Table of Characters .......................................................................................................... 17
Table 4 - H5W Instruction of Keypad ............................................................................................................ 20
Table 5 - Firmware upgrade .......................................................................................................................... 42
Table 6 - Auto Provision ................................................................................................................................ 44
Table 7 - Service port ..................................................................................................................................... 49
Table 8 - QoS & VLAN ................................................................................................................................... 51
Table 9 - Line configuration on the web page .................................................................................................. 51
Table 10 - SIP hotspot Parameters.................................................................................................................... 57
Table 11 - Phone dialing methods ................................................................................................................. 60
Table 12 - Dial - up rule configuration table .................................................................................................... 60
Table 13 - IP camera ....................................................................................................................................... 62
Table 14 - Set the line global configuration on the web page ........................................................................ 62
Table 15 - VQ RTCP-XR Settings ................................................................................................................... 63
Table 16 - General function Settings ................................................................................................................ 63
Table 17 - Voice settings .................................................................................................................................. 66
Table 18 - Multicast parameters ....................................................................................................................... 67
Table 19 - Time&Date settings ....................................................................................................................... 68
Table 20 - Softkey configuration .................................................................................................................... 72
Table 21 - Side Key configuration ................................................................................................................. 73
Table 22 - Network Firewall .......................................................................................................................... 76
Table 23 - Trouble Cases .................................................................................................................................. 80
8
3 Safety Instruction
Please read the following safety notices before installing or using this unit. They are crucial for the safe and
reliable operation of the device.
Please use the external power supply that is included in the package. Other power supply may cause
damage to the phone and affect the behavior or induce noise.
Before using the external power supply in the package, please check the home power voltage.
Inaccurate power voltage may cause fire and damage.
Please do not damage the power cord. If power cord or plug is impaired, do not use it because it may
cause fire or electric shock.
Do not drop, knock or shake the phone. Rough handling can break internal circuit boards.
This phone is designed for indoor use. Do not install the device in places where there is direct sunlight.
Also do not put the device on carpets or cushions. It may cause fire or breakdown.
Avoid exposure the phone to high temperature or below 0℃ or high humidity.
Avoid wetting the unit with any liquid.
Do not attempt to open it. Non-expert handling of the device could damage it. Consult your authorized
dealer for help, or else it may cause fire, electric shock and breakdown.
Do not use harsh chemicals, cleaning solvents, or strong detergents to clean it. Wipe it with a soft cloth
that has been slightly dampened in a mild soap and water solution.
When lightning, do not touch power plug, it may cause an electric shock.
Do not install this phone in an ill-ventilated place. You are in a situation that could cause bodily injury.
Before you work on any equipment, be aware of the hazards involved with electrical circuitry and be
familiar with standard practices for preventing accidents.
9
FCC Statement
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation.
This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more
of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
To assure continued compliance, any changes or modifications not expressly approved by the party.
Responsible for compliance could void the user’s authority to operate this equipment. (Example- use only
shielded interface cables when connecting to computer or peripheral devices).
This equipment complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
your body.
FCC Radiation Exposure Statement:
The equipment complies with FCC Radiation exposure limits set forth for uncontrolled enviroment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and
10
4 Overview
4.1 Overview
in the living room or office .
H5W is a low-end WIFI product phone, with advanced design, high cost performance, paperless office, which
greatly improves the production efficiency of the enterprise; not only a desk phone, but also a boutique placed
H5W, which are the latest generation of IP phone developed on the basis of the X series, inheriting many
excellent features of the previous X series traditional phone, such as high-definition voice and
high-performance echo cancellation full duplex speaker, fast / gigabit Ethernet, QoS, encryption transmission,
automatic configuration, new system, smooth operation, flat interface settings and many other advantages.
For enterprise users,while realizing environmental protection, they also provide convenient operation. Users
can flexibly configure and define the functions of two DSS keys, space saving and cost. It will be an ideal
choice for enterprise users and family users who pursue the high quality and high efficiency.
In order to help some interested users better understand the details of the product, this user manual can be
used as a reference guide for the use of H5W series. This document may not be applicable to the latest
version of the software. If you have any questions, you can use the help prompt interface of the device phone,
or download and update your user manual from the official website.
4.2 H5W Packing Contents
11
4.3 H3W Packing Contents
12
13
5 Desktop Installation
5.1 PoE and the use of external power adapters
The devices support two power supply modes from external power adapter or over Ethernet (PoE)
complied switch.
PoE power supply saves the space and cost of providing the device additional power outlet. With a PoE
switch, the device can be powered through a single Ethernet cable which is also used for data transmission.
By attaching UPS system to PoE switch, the device can keep working at power outage just like traditional
PSTN telephone which is powered by the telephone line.
For users who do not have PoE equipment, the traditional power adaptor should be used. If the device is
connected to a PoE switch and power adapter at the same time, the power adapter will be used in priority and
will switch to PoE power supply once it fails.
Please use the power adapter supplied by Fanvil and the PoE switch met the specifications to ensure the
device to work properly.
14
5.2 Desktop and wall mounted method
The device supports two installation modes, desktop and wall mounted.If the phone is on the desktop, please
follow the instructions in the picture below to install the phone.
If the phone is mounted on the wall, please follow the instructions below to install it.
Picture 1 - Device installation
15
Picture 2 - Wall-mounted installation
Connect the power adapter, network, PC, phone and earphone to the appropriate port as shown in the picture
below.
Picture 3 - Connecting to the Device
Table 1 - Hardware Interface Description
Index
Interface
Description
①
②
③
④
⑤
Power Interface
Connecting Power Adapter
Network Interface
Connecting to LAN or Internet
PC Port
Network Interface for Connecting Computer
Headset Interface
Connecting Headset
Receiver Interface
Connecting Microphone Receiver
16
6 Appendix Table
6.1 Appendix I - Icon
Table 2 - Keypad Icons
Icon
Instruction
Hands-free (HF) speaker
Mute Microphone (During Call)
Redial
MWI
Volume down
Volume up
Hold
Transfer
6.2 Appendix II - Keyboard character query table
Table 3 - Look-up Table of Characters
Mode Icon
Text Mode
Characters Of Each Press
Numeric
Lower Case
Alphabets
1
2
3
4
5
6
7
8
9
0
*.+
#
@:;()<>
a b c
d e f
g h i
Key Button
1
2
3
4
5
6
7
8
9
0
＊
#
1
2
3
4
17
5
6
7
8
9
0
＊
#
1
2
3
4
5
6
7
8
9
0
＊
#
1
2
3
4
5
6
7
8
9
0
＊
#
j k l
m n o
p q r s
t u v
w x y z
(space)
.,*/+-:_=
# ^!&$%
@:;()<>
A B C
D E F
G H I
J K L
M N O
P Q R S
T U V
WZYX
(space)
.,*/+-:_=
# ^!&$%
1
2 a b c A B C
3 d e f D E F
4 g h I G H I
5 j k l J K L
6 m n o M N O
7 p q r s P Q R S
8 t u v T U V
9 w z y x W Z Y X
0
.,*/+-:_=
# ^!&$%
Upper Case
Alphabets
Mixed type input
18
Blank
19
7
Introduction to the User
7.1 H5W Key description
Picture 4 - H5W Instruction of Keypad
Table 4 - H5W Instruction of Keypad
Number
Instruction
The keypad
names
Softkey
○1
○2
These six buttons provide the menu function that corresponds to the
display on the screen
Standard
The 12 standard telephone keys provide the same function as standard
Telephone
telephones, but further to the standard function, some keys also provide
Keys
special function by long-pressing the key,
20
○3
○4
○5
○6
○7
○8
○9
○10
Hold Key
Press the "Hold" key during the call, the user can hold the call, and press it
again to cancel the holding and restore the normal call state.
Press the "Transfer" button, the user can transfer the current call to other
Transfer Key
numbers.
Redial
Press the Redial key to redial the last number dialed
Press the "voice mail" button, and the user enters the interface of SMS and
voice mail
voice mail list.
Volume Down
Key
Volume Up
Key
In the standby state, ring and ring configuration interface, press this button
to reduce the ring volume; Press this button to lower the volume on the call
or volume adjustment screen.
In the standby state, ring and ring configuration interface, press this button
to increase the ring volume; Press this button to increase the volume on the
call or volume adjustment screen.
Mute Key
During a call, the user can press this key to mute the microphone.
Hands-free
The user can press this key to open the audio channel of the
Key
speakerphone.
21
7.2 H5W Key description
Picture 5 - H3W Instruction of Keypad
Table 5 - H3W Instruction of Keypad
Number
Instruction
The keypad
names
Softkey
○1
○2
○3
○4
These six buttons provide the menu function that corresponds to the
display on the screen
Standard
The 12 standard telephone keys provide the same function as standard
Telephone
telephones, but further to the standard function, some keys also provide
Keys
special function by long-pressing the key,
Hold Key
Press the "Hold" key during the call, the user can hold the call, and press it
again to cancel the holding and restore the normal call state.
Press the "Transfer" button, the user can transfer the current call to other
Transfer Key
numbers.
22
○5
○6
○7
○8
○9
○10
Redial
Press the Redial key to redial the last number dialed
Press the "voice mail" button, and the user enters the interface of SMS and
voice mail
voice mail list.
Volume Down
Key
Volume Up
Key
In the standby state, ring and ring configuration interface, press this button
to reduce the ring volume; Press this button to lower the volume on the call
or volume adjustment screen.
In the standby state, ring and ring configuration interface, press this button
to increase the ring volume; Press this button to increase the volume on the
call or volume adjustment screen.
Mute Key
During a call, the user can press this key to mute the microphone.
Hands-free
The user can press this key to open the audio channel of the
Key
speakerphone.
7.3 Using Handset / Hands-free Speaker
About the use of the handle, the user can pick up the handle to dial the number, press the "#" button after
pressing the number, the number will be dialed.Users can switch audio channels of the phone by pressing the
Using Handset
hands-free button.
Using Hands-free Speaker
For the use of the speakerphone, the user can dial the number by pressing the speakerphone button, or by
dialing the number and then pressing the speakerphone button.When the voice channel of the handle is
opened, the user can switch the audio channel of the phone by pressing the button of the hands-free speaker.
23
7.4 Idle Screen
Picture 6 - Screen layout/default home screen
Users can restore the phone to the default standby screen interface by picking up and dropping the handle.
The icon description is described in 6.1 appendix I.
In some screens, there are many items or long text to be displayed which could not fit into the screen. They
will be arranged in a list or multiple lines with a scroll bar. If the user sees a scroll bar, he can use up/down
navigator buttons to scroll the list. By long-pressed the navigator keys, user can scroll the list or items in a
faster speed.
7.5 Phone Status
Picture 7 - Scroll icon
The phone status includes the following information about the phone:
Network Status:
24
VLAN ID
IPv4 or IPv6 status
IP Address
Network Mode
Mac Address
Phone Mode
The Phone Device Information:
Hardware Version number
Software Version number
Phone Storage (RAM and ROM)
System Running Time
H3W phone: Long press the "#" key (more than 3 seconds) for voice dial IP
H5W Phone interface: When the phone is in standby mode, long press the "#" key (more than 3 seconds)
to enter the menu page and select the option to view the corresponding information.
Picture 8 - The Phone status
WEB interface: Refer to 7.5 Web management to log in the phone page, enter the 【System】 >>
【Information】 page, and check the phone status, as shown in the figure:
25
Picture 9 - WEB phone status
7.6 Making Phone Calls
Default Line
The device provides two line services (1 main line and 1 standby line). if both lines are configured
successfully, the user uses line 1 to make or receive calls by default.
Users can dial a number in the following ways:
Dialing Methods
The Device end
Redialing the last dialed number（Redial）
Dialing Number then Opening Audio
Dial directly, pick up the handle and input the number, then press "#" to call out
To make a phone call, user can firstly dial a number by one of the above methods. When the dialed number is
completed, user can press [Dial] button on the soft-menu, or press hand-free button to turn on the speaker or
headphone, or lift the handset to call out with the current line.
Opening Audio then Dialing the Number
Another alternative is the traditional way to firstly open the audio channel by lifting the handset, then turn on
26
the hands-free speaker by pressing hands-free button, or line key, and then dial the number with one of the
above methods. When completing the number dial, user can press [Dial] button to call out, or the number can
also be dialed out automatically after timeout.
Picture 10 - Open the voice channel and dial the number
While calling the number, user can stop the audio channel by putting back the handset or pressing the
Cancel Call
hands-free button to drop the call.
Picture 11 - Call number
7.7 Web Management
Phone can be configured and managed on the web page of the phone. The user needs to enter the IP
address of the phone in the browser and open the web page of the phone firstly. H5W users can access the
menu page and check the IP address of their phone by pressing the "#" key for more than 3 seconds.H3W
users can voice dial the phone's IP address by long pressing the "#" key (3 seconds or more).
27
Picture 12 - Landing page
Users must correctly enter the user name and password to log in to the web page. The default user name and
password are "admin". For the specific details of the operation page, please refer to page 11 Web
configuration.
The device relies on IP network connection to provide service. Unlike traditional phone system based on a
circuit switched wire technology, IP devices are connected to each other over the network and exchange data
in packet basis based on the devices’ IP address.
NOTICE! If user saw a
‘WAN Disconnected’ icon flashing in the middle of screen, it means the
network cable was not correctly connected to the device’s network port. Please check the cable is
connected correctly to the device and to the network switch, router, or modem.
The device supports three types of networks，IPv4/IPv6/IPv4&IPv6
There are three common IP configuration modes about IPv4
Dynamic Host Configuration Protocol (DHCP) – This is the automatic configuration mode by getting
network configurations from a DHCP server. Users don’t need to configure any parameters manually. All
configuration parameters will be getting from DHCP server and applied to the device. This is
recommended for the most users.
Static IP Configuration – This option allows user to configure each IP parameters manually, including IP
Address, Subnet Mask, Default Gateway, and DNS servers. This is usually used in a technical
environment of network users.
PPPoE - This option is often used by users who connect the device to a broadband modem or router. To
establish a PPPoE connection, user should configure username and password provided by the service
provider.
The device is default configured in DHCP mode.
There are three common IP configuration modes about IPv6
DHCP - This is the automatic configuration mode by getting network configurations from a DHCP server.
Users need not to configure any parameters manually. All configuration parameters will be getting from
DHCP server and applied to the device. This is recommended for most users.
Static IP configuration - this option allows users to manually configure each IP parameter, including IP
address, mask, gateway, and primary and secondary domains. This usually applies to some
28
professional network user environments.
Please see 10.7.2.1 network Settings for detailed configuration and use.
7.8 SIP Configurations
A line must be configured properly to be able to provide telephony service. The line configuration is like a
virtualized SIM card on a mobile phone which stores the service provider and the account information used
for registration and authentication. When the device is applied with the configuration, it will register the device
to the service provider with the server’s address and user’s authentication as stored in the configurations.
The user can conduct line configuration on the interface of the phone or the webpage, and input the
corresponding information at the registered address, registered user name, registered password and SIP
user and registered port respectively, which are provided by the SIP server administrator.
WEB interface: After logging into the phone page, enter [Line] >> [SIP] and select SIP for configuration,
click apply to complete registration after configuration, as shown below:
Picture 13 - Web SIP registration
29
8 Basic Function
8.1 Answering Calls
When there is an incoming call while the device is idle, user will see the following incoming call on the screen.
Picture 14 - Answering calls
User can answer the call by lifting the handset, open speaker phone by pressing the hands-free button, or the
[Answer] button. To divert the incoming call, user should press [Divert] button. To reject the incoming call,
user should press [Reject] button.
Talking
8.1.1
When the call is connected, user will see a talking mode screen as the following figure.
Picture 15 - Talking interface
Table 5- Talking mode
30
①
②
③
④
⑤
⑥
8.1.2
Number
Name
Description
Default line
The line currently used by the phone.
Voice channel
The icon shows the voice channel mode being used.
Calls to end
The name or number of the person on the other end of the call.
Call duration
The duration of a call after it has been established.
Numbers of line
Shows how many calls are present on the current device
Speech quality
Displays the current voice quality of the call.
Make / Receive Second Call
The device can support up to two concurrent calls. When there is already a call established, user can still
answer another incoming call on either lines or make a second call on either lines.
Second Incoming Call
When there is another incoming call during talking a phone call, this call will be waiting for user to answer.
User will see the call message in the middle of current screen. The device will not be ringing but playing call
waiting tone in the audio channel of the current call and the LED will be flashing in green. User can accept or
reject the call as same as normal incoming call. When the waiting call is answered, the first call will be held on
automatically.
Picture 16 - The second call interface
Switching between Two Calls
When there are two calls established, user will see a dual calls screen as the following picture.
31
After the user finishes the call, the user can put the handle back on the phone, press the hands-free buttonto
Picture 17 - Two way calling
User can press up/down navigator buttons to switch screen page, and switch call focus by pressing [Resume]
User may hang up the current talking call by closing the audio channel or press [End] button. The device will
button.
Ending One Call
return to single call mode in holding state.
8.2 End of the Call
close the voice channel and end the call.
8.3 Redial
Redial the last outgoing number:
dialed.
Call out any number with the redial key:
Redial record clearing
8.4 Auto-Answering
When the phone is in standby mode, press the redial button and the phone will call out the last number
Enter the number, press the redial key, and the phone will call out the number on the dial.
After the phone is used, redial will default to the last used number; therefore, it is necessary to clear the
records used by the last customer without affecting the use of other customers.
Users can enable the automatic answer function in the web page, the phone will be able to answer
automatically after the call.Automatic response enables differentiated lines to be enabled.
WEB interface:
Log in the phone page, enter [Line] >> [SIP], select [SIP] >> [Basic settings], start auto-answering, and
32
click apply after setting the automatic answering time.
8.5 Mute
Picture 18 - Web page to start auto-answering
You can turn on mute mode during a call and turn off the microphone so that the local voice is not heard.
Normally, mute mode is automatically turned off at the end of a call. You can also turn on mute on any screen
(such as the free screen) and mute the ringtone automatically when there is an incoming call.
Mute mode can be turned on in all call modes (handles or hands-free).
During the conversation, press the mute button on the phone:
the mute button on the phone will turn
8.5.1
Mute the Call
on the red light.
Red mute icon is displayed in the call interface, as shown in the figure:
Picture 19 - Mute the call
Cancel mute: press
cancel mute on the phone again. The mute icon is no longer displayed in the call
screen. The red light is off by mute button.
8.5.2
Ringing Mute
Mute: press the mute button when the phone is in standby mode:
33
The top right corner of the phone shows the bell mute icon ，Mute button red light is always on, when
there is an incoming call, the phone will display the incoming call interface but will not ring.
。
Picture 20 - Ringing mute
Cancel ring tone mute: On the standby or incoming call screen, press the mute button again
or
volume up
cancel ring tone mute, no longer shows mute icon in upper right corner after
cancel
.The phone mute icon is off .
8.6 Call Hold/Resume
The user can press the [Hold] button to maintain the current call, and this button will become the [ Resume ]
button, and the user can press the "resume" button to restore the call.
Picture 21 - Call hold interface
8.7 Call Transfer
When the user is talking with a remote party and wish to transfer the call to another remote party。
34
During the call, the user presses transfer button on the phone
contact button or the history button to select the number, press the transfer key again or blind transfer
, Enter the number to transfer or press the
to a third party. After the third party rings, the phone will show that the transfer is successful and hang
up.
Picture 22 - Transfer interface
8.8 Call Waiting
Enable call waiting: new calls can be accepted during a call.
Disable call waiting: new calls will be automatically rejected and a busy tone will be prompted.
Enable call waiting tone: when you receive a new call on the line, the tone will beep.
The user can enable/disable the call waiting function in the phone interface and the web interface.
WEB interface: Enter [Phone Settings] >> [Features] >> [Basic Settings], enable/disable call waiting
and call waiting tone.
Picture 23 - Web call waiting setting
35
Picture 24 - Web call waiting tone setting
8.9 Anonymous Call
8.9.1
Anonymous Call
The phone can set up anonymous calls to hide the calling number and the calling name.
On the web page [Line] >> [SIP] >> [Advanced Settings] can also open the mode of anonymous calls.
Setting to enable anonymous calls also corresponds to the SIP line. That is, the setting under the SIP1
page can only take effect on the SIP1 line.
Picture 25 - Enable Anonymous web page call
8.9.2
The device can be set to prohibit anonymous calls, that is anonymous calls to the number will be directly
Ban Anonymous Call
rejected.
On the web page [Line] >> [SIP] >> [Advanced Settings], also can disable anonymous calls.
The setup to disable anonymous calls also corresponds to the SIP line. That is, the setting under the
SIP1 page can only take effect on the SIP1 line.
Picture 26 - Page Settings blocking anonymous call
36
8.10 Hotline
The device supports hotline dialing. After setting up the hotline dialing, directly pick up the handset,
hands-free etc., and the phone will automatically call according to the hotline delay time.
On the website [Line] >> [SIP] >> [Basic Settings], can also set up a hotline.
The setup hotline also corresponds to the SIP line. That is, the hotline set in the SIP1 webpage can only
be activated in the SIP1 line.
Picture 27 - Hotline set up on webpage
37
9 Advance Function
9.1 MCAST
This feature allows user to make some kind of broadcast call to people who are in multicast group. User can
configure a multicast DSS Key on the phone, which allows user to send a Real Time Transport Protocol (RTP)
stream to the pre-configured multicast address without involving SIP signaling. You can also configure the
phone to receive an RTP stream from pre-configured multicast listening address without involving SIP
signaling. You can specify up to 10 multicast listening addresses.
9.2 MWI（Message Waiting Indicator）
If the service of the lines supports voice message feature, when the user is not available to answer the call,
the caller can leave a voice message on the server to the user. The user will be notified of the server voice
message and the status of the power lamp.
To listen to a voice message, the user must first configure the voicemail number. After the voicemail number
is configured, the user can retrieve the voicemail of the default line.
38
The user can log into the web page of the phone to manage the user's phone information and operate the
phone. Users must provide the correct user name and password to log in.
10 Web Configurations
10.1 Web Page Authentication
10.2 System >> Information
User can get the system information of the device in this page including,
And summarization of network status,
Model
Hardware Version
Software Version
Uptime
Network Mode
MAC Address
IP
Subnet Mask
Default Gateway
SIP User
Besides, summarization of SIP account status,
SIP account status (Registered / Unapplied / Trying / Timeout )
10.3 System >> Account
On this page the user can change the password for the login page.
Users with administrator rights can also add or delete users, manage users, and set permissions and
passwords for new users.
10.4 System >> Configurations
On this page, users with administrator privileges can view, export, or import the phone configuration, or
restore the phone to factory Settings.
Clear Configurations
Select the module in the configuration file to clear.
SIP: account configuration.
AUTOPROVISION: automatically upgrades the configuration
TR069:TR069 related configuration
MMI: MMI module, including authentication user information, web access protocol, etc.
39
DSS Key: DSS Key configuration
Clear Data Tables
Select the local data table to be cleared, all selected by default.
Reset Phone
The phone data will be cleared, including configuration and database tables.
10.5 System >> Upgrade
10.5.1 H5W System >> Upgrade
Upgrade phone software version, custom ring tone, background image, DSS Key icon, etc., or delete the
upgrade file.Ringtone support. Wav format
Web page: Login phone web page, go to [System] >> [Upgrade].
40
Picture 28 - H5W Web page firmware upgrade
10.5.2 H3W System >> Upgrade
Upgrade the phone software version, customize the ringtone, or delete the upgrade file.Ringtone support.
Wav format.
Web page: Login phone web page, go to [System] >> [Upgrade].
41
Picture 29 - Picture 28 - H3W Web page firmware upgrade
Table 6 - Firmware upgrade
Description
Parameter
Upgrade server
Enable Auto Upgrade
software firmware on the server, phone will show a prompt upgrade
Enable automatic upgrade, If there is a new version txt and new
message after Update Interval.
Upgrade Server Address1
Set available upgrade server address.
Upgrade Server Address2
Set available upgrade server address.
Update Interval
Set Update Interval.
Firmware Information
Current Software Version
It will show Current Software Version.
Server Firmware Version
It will show Server Firmware Version.
If there is a new version txt and new software firmware on the server,
[Upgrade] button
the page will display version information and upgrade button will
become available; Click [Upgrade] button to upgrade the new
42
Xxxxx
Xxxxx
Xxxxx
Xxxxx
firmware.
New version description
information
When there is a corresponding TXT file and version on the server
side, the TXT and version information will be displayed under the
new version description information.
The file requested from the server is a TXT file called vendor_model_hw10.txt.Hw followed by the
hardware version number, it will be written as hw10 if no difference on hardware. All Spaces in the
filename are replaced by underline.
The URL requested by the phone is HTTP:// server address/vendor_Model_hw10
.txt: The new version and the requested file should be placed in the download directory of the HTTP
server
TXT file format must be UTF-8
vendor_model_hw10.TXT The file format is as follows：
Version=1.6.3 #Firmware
distinguished by the presence of protocol headers.
BuildTime=2018.09.11 20:00
Info=TXT|XML
Firmware=xxx/xxx.z #URL，Relative paths are supported and absolute paths are possible,
After the interval of update cycle arrives, if the server has available files and versions, the phone will
prompt as shown below. Click [view] to check the version information and upgrade.
10.6 System >> Auto Provision
Phone Webpage: Login and go to [System] >> [Auto provision].
43
Picture 30 - Page auto provision Settings
Fanvil devices support SIP PnP, DHCP options, Static provision, TR069. If all of the 4 methods are enabled,
the priority from high to low as below:
PNP>DHCP>TR069> Static Provisioning
Transferring protocol: FTP, TFTP, HTTP, HTTPS
Details refer to Fanvil Auto Provision in
http://www.fanvil.com/Uploads/Temp/download/20180920/5ba3816f8d5f0.pdf
Table 7 - Auto Provision
Parameters
Basic settings
Description
CPE Serial Number
Display the device SN
Authentication Name
The user name of provision server
Authentication Password
The password of provision server
Configuration File
If the device configuration file is encrypted , user should add the encryption
General Configuration File
If the common configuration file is encrypted, user should add the encryption
Encryption Key
key here
Encryption Key
key here
Download Fail Check
Times
If there download is failed, phone will retry with the configured times.
44
Update Contact Interval
Phone will update the phonebook with the configured interval time. If it is 0,
the feature is disabled.
Save Auto Provision
Save the HTTP/HTTPS/FTP user name and password. If the provision URL
Information
is kept, the information will be kept.
Download Common
Config enabled
Enable Server Digest
DHCP Option
Whether phone will download the common configuration file.
When the feature is enable, if the configuration of server is changed, phone
will download and update.
Option Value
DHCP option 66 | DHCP option 43, 3 methods to get the provision URL. The
Confiugre DHCP option, DHCP option supports DHCP custom option |
default is Option 66.
Custom Option Value
same as server define.
Custom Option value is allowed from 128 to 254. The option value must be
Enable DHCP Option 120 Use Option120 to get the SIP server address from DHCP server.
SIP Plug and Play (PnP)
Enable SIP PnP
Whether enable PnP or not. If PnP is enable, phone will send a SIP
SUBSCRIBE message with broadcast method. Any server can support the
feature will respond and send a Notify with URL to phone. Phone could get
the configuration file with the URL.
Server Address
Broadcast address. As default, it is 224.0.0.0.
Server Port
PnP port
Transport Protocol
PnP protocol, TCP or UDP.
Update Interval
PnP message interval.
Static Provisioning Server
Server Address
Provisioning server address. Support both IP address and domain address.
The configuration file name. If it is empty, phone will request the common file
Configuration File Name
and device file which is named as its MAC address.
The file name could be a common name, $mac.cfg, $input.cfg. The file
format supports CFG/TXT/XML.
Protocol Type
Transferring protocol type ，supports FTP、TFTP、HTTP and HTTPS
Update Interval
check the update every 1 hour.
Configuration file update interval time. As default it is 1, means phone will
Provision Mode.
1. Disabled.
2. Update after reboot.
3. Update after interval.
Update Mode
TR069
45
Enable TR069
Enable TR069 after selection
ACS Server Type
There are 2 options Serve type, common and CTC.
ACS Server URL
ACS server address
ACS User
ACS server username (up to is 59 character)
ACS Password
ACS server password (up to is 59 character)
Enable TR069 Warning
Tone
If TR069 is enabled, there will be a prompt tone when connecting.
TLS Version
TLS version (TLS 1.0, TLS 1.1, TLS 1.2)
INFORM Sending Period
INFORM signal interval time. It ranges from 1s to 999s
STUN Server Address
Configure STUN server address
STUN Enable
To enable STUN server for TR069
Tools provided in this page help users to identify issues at trouble shooting. Please refer to 13 Trouble
10.7 System >> Tools
Shooting for more detail.
10.8 System >> Reboot Phone
This page can restart the phone.
46
11 Network
This page allows users to configure network connection types and parameters.
11.1 Network >> Wi-Fi Settings
The default network priority is WiFi
network address for configuration
The current device supports coexistence of wifi and Ethernet, and users can log in to the web page with any
For example, WiFi access IP is 172.16.19.19 and Ethernet access IP is 172.16.12.63
Page login 172.16.12.63, 172.16.19.19 Any network address login page for configuration
This page can turn on WiFi, add WiFi information, and view the wireless network list.
Picture 31 - Network Priority
47
11.2 Network >> Basic
Picture 32 - WiFi Settings
There are 3 network protocol mode options, IPv4, IPv6 and IPv4 & IPv6.
IP Mode
IPv4
In IPv4 mode, there are 3 connection mode options: DHCP, PPPoE and Static IP.
When using DHCP mode, phone will get the IP address from DHCP server (router).
Use DHCP DNS: It is enabled as default. “Enable” means phone will get DNS address from DHCP
Use DHCP time: It is disabled as default. “Enable” to manage the time of get DNS address from DHCP
server and “disable” means not.
server and “disable” means not
When using PPPoE, phone will get the IP address from PPPoE server.
Username: PPPoE user name.
Password: PPPoE password.
When using Static IP mode, user must configure the IP address manually.
IP Address: Phone IP address.
Mask: sub mask of your LAN.
Gateway: The gateway IP address. Phone could access the other network via it.
Primary DNS: Primary DNS address. The default is 8.8.8.8, Google DNS server address.
Secondary DNS: When primary DNS is not available, Secondary DNS will work.
48
IPv6
In IPv6, there are 2 connection mode options, DHCP and Static IP.
DHCP configuration refers to IPv4 introduction in last page.
Static IP configuration is almost same as IPv4’s, except the IPv6 Prefix.
IPv6 Prefix: IPv6 prefix, it is similar with mask of IPv4.
11.3 Network >> Service Port
This page provides settings for Web page login protocol, protocol port settings and RTP port.
Picture 33 - Service Port Settings
Table 8 - Service port
Parameter
Description
Web Server Type
HTTP/HTTPS.
Web Logon Timeout
need to login again.
Reboot to take effect after settings. Optionally, the web page login is
Default as 15 minutes, the timeout will automatically exit the login page,
Web auto login
automatically login to the web page.
After the timeout does not need to enter a user name password, will
The default is 80. If you want system security, you can set ports other than
HTTP Port
80.
HTTPS Port
The default is 443, the same as the HTTP port.
Such as :8080, webpage login: HTTP://ip:8080
RTP Port Range Start
The value range is 1025 to 65535. The value of RTP port starts from the
initial value set. For each call, the value of voice and video port is added 2.
RTP Port Quantity
Number of calls.
49
11.4 Network >> VPN
VPN server.
OpenVPN.
L2TP
Virtual Private Network (VPN) is a technology to allow device to create a tunneling connection to a server and
becomes part of the server’s network. The network transmission of the device may be routed through the
For some users, especially enterprise users, a VPN connection might be required to be established before
activate a line registration. The device supports two VPN modes, Layer 2 Transportation Protocol (L2TP) and
The VPN connection must be configured and started (or stopped) from the device web portal.
NOTICE! The device only supports non-encrypted basic authentication and non-encrypted data
tunneling. For users who need data encryption, please use OpenVPN instead.
To establish a L2TP connection, users should log in to the device web portal, open webpage [Network] >>
[VPN]. In VPN Mode, check the “Enable VPN” option and select “L2TP”, then fill in the L2TP server address,
Authentication Username, and Authentication Password in the L2TP section. Press “Apply” then the device
will try to connect to the L2TP server.
When the VPN connection established, the VPN IP Address should be displayed in the VPN status. There
may be the delay of the connection establishment. User may need to refresh the page to update the status.
Once the VPN is configured, the device will try to connect with the VPN automatically when the device boots
up every time until user disable it. Sometimes, if the VPN connection does not establish immediately, user
may try to reboot the device and check if VPN connection established after reboot.
OpenVPN
To establish an OpenVPN connection, user should get the following authentication and configuration files
from the OpenVPN hosting provider and name them as the following,
User then upload these files to the device in the web page [Network] >> [VPN], select OpenVPN Files. Then
user should check “Enable VPN” and select “OpenVPN” in VPN Mode and click “Apply” to enable OpenVPN
Same as L2TP connection, the connection will be established every time when system rebooted until user
OpenVPN Configuration file:
client.ovpn
CA Root Certification:
ca.crt
Client Certification:
Client Key:
client.crt
client.key
connection.
disable it manually.
LLDP
11.5 Network >> Advanced
Link Layer Discovery Protocol. LLDP is a vendor independent link layer protocol used by network devices for
50
advertising their identity, capabilities to neighbors on a LAN segment.
Phone could use LLDP to find the VLAN switch or other VLAN devices and use LLDP learn feature to apply
the VLAN ID from VLAN switch to phone its self.
CDP
Cisco Discovery Protocol. CDP is a not-for-profit charity that runs the global disclosure system for investors,
companies, cities, states and regions to manage their environmental impacts. According to the CDP, Cisco
devices could share the OS version, IP address, hardware version and so on.
Table 9 - QoS & VLAN
Parameters
Description
LLDP setting
Enable LLDP
LLDP requests interval time
Learning
apply the learned VLAN ID to the phone configuration
Report
Interval
QoS
WAN VLAN
LAN VLAN
CDP
CDP
QoS Mode
configure SIP DSCP and audio DSCP
WAN VLAN
WAN port VLAN configuration
LAN VLAN
LAN port VLAN configuration
CDP enable/disable ，CDP interval time
11.6 Line >> SIP
Configure the Line service configuration on this page.
Table 10 - Line configuration on the web page
Parameters
Description
Register Settings
Display the current line status at page loading. To get the up to date line
Line Status
Activate
Username
status, user has to refresh the page manually.
Whether the service of the line is activated
Enter the username of the service account.
Authentication User
Enter the authentication user of the service account
Display Name
Enter the display name to be sent in a call request.
Authentication Password
Enter the authentication password of the service account
51
Realm
Server Name
SIP Server 1
Enter the SIP domain if requested by the service provider
Input server name.
Server Address
Enter the IP or FQDN address of the SIP server
Server Port
Enter the SIP server port, default is 5060
Transport Protocol
Set up the SIP transport line using TCP or UDP or TLS.
Registration Expiration
Set SIP expiration date.
SIP Server 2
Server Address
Enter the IP or FQDN address of the SIP server
Server Port
Enter the SIP server port, default is 5060
Transport Protocol
Set up the SIP transport line using TCP or UDP or TLS.
Registration Expiration
Set SIP expiration date.
SIP Proxy Server Address Enter the IP or FQDN address of the SIP proxy server.
Proxy Server Port
Enter the SIP proxy server port, default is 5060.
Proxy User
Enter the SIP proxy user.
Proxy Password
Enter the SIP proxy password.
Enter the IP or FQDN address of the backup proxy server.
Backup Proxy Server Port Enter the backup proxy server port, default is 5060.
Backup Proxy Server
Address
Basic Settings
Enable Auto Answering
Call Forward
Unconditional
Call Forward Number for
Unconditional
Call Forward on Busy
Call Forward Number for
Busy
Call Forward on No
Answer
Call Forward Number for
No Answer
Enable auto-answering, the incoming calls will be answered automatically
after the delay time
Auto Answering Delay
Set the delay for incoming call before the system automatically answered it
Enable unconditional call forward, all incoming calls will be forwarded to the
number specified in the next field
Set the number of unconditional call forward
Enable call forward on busy, when the phone is busy, any incoming call will
be forwarded to the number specified in the next field.
Set the number of call forward on busy .
Enable call forward on no answer, when an incoming call is not answered
within the configured delay time, the call will be forwarded to the number
specified in the next field.
Set the number of call forward on no answer.
Call Forward Delay for No Set the delay time of not answered call before being forwarded.
52
Answer
Transfer Timeout
Set the timeout of call transfer process.
Server Conference
Number
Subscribe For Voice
Message
Set the conference room number when conference type is set to be Server
Enable the device to subscribe a voice message waiting notification, if
enabled, the device will receive notification from the server if there is voice
message waiting on the server
Voice Message Number
Set the number for retrieving voice message
Voice Message Subscribe
Period
Set the interval of voice message notification subscription
Enable Hotline
immediately at audio channel opened by off-hook handset or turn on
Enabling hotline configuration, the device will dial to the specific number
Hotline Delay
Set the delay for hotline before the system automatically dialed it
hands-free speaker
Hotline Number
Set the hotline dialing number
Dial Without Registered
Set call out by proxy without registration
Enable Missed Call Log
If enabled, the phone will save missed calls into the call history record.
DTMF Type
Set the DTMF type to be used for the line
DTMF SIP INFO Mode
Set the SIP INFO mode to send ‘*’ and ‘#’ or ‘10’ and ‘11’
Subscribe For Voice
Enable the device to subscribe a voice message waiting notification, if
enabled, the device will receive notification from the server if there is voice
message waiting on the server
Set the line to use VPN restrict route
Set the line to use STUN for NAT traversal
Enable Failback
Whether to switch to the primary server when it is available.
A Register message is used to periodically detect the time interval for the
availability of the main Proxy.
execute failback.
Multiple proxy cases, whether to allow the invite/register request to also
Signal Retry Counts
under multiple proxy scenarios.
The number of attempts that the SIP Request considers proxy unavailable
Set the priority and availability of the codecs by adding or remove them
Codecs Settings
from the list.
Video Codecs
Select video code to preview video.
Advanced Settings
Use Feature Code
When this setting is enabled, the features in this section will not be handled
by the device itself but by the server instead. In order to control the
Message
Use VPN
Use STUN
Failback Interval
Signal Failback
53
enabling of the features, the device will send feature code to the server by
dialing the number specified in each feature code field.
Enable Call Forward
Unconditional
Disable Call Forward
Unconditional
Enable Call Forward on
Busy
Busy
Disable Call Forward on
Enable Call Forward on
No Answer
Disable Call Forward on
No Answer
Enable Blocking
Anonymous Call
Disable Blocking
Anonymous Call
Set the feature code to dial to the server
Set the feature code to dial to the server
Set the feature code to dial to the server
Set the feature code to dial to the server
Set the feature code to dial to the server
Set the feature code to dial to the server
Set the feature code to dial to the server
Set the feature code to dial to the server
Call Waiting On Code
Set the feature code to dial to the server
Call Waiting Off Code
Set the feature code to dial to the server
Send Anonymous On
Code
Code
Send Anonymous Off
Set the feature code to dial to the server
Set the feature code to dial to the server
SIP Encryption
Enable SIP encryption such that SIP transmission will be encrypted
RTP Encryption
Enable RTP encryption such that RTP transmission will be encrypted
Session Timeout
Set the session timer timeout period
Response Single Codec
incoming call request
If setting enabled, the device will use single codec in response to an
The registered server will receive the subscription package from ordinary
BLF Server
application of BLF phone.
Please enter the BLF server, if the sever does not support subscription
package, the registered server and subscription server will be separated.
Set the line to use dummy UDP or SIP OPTION packet to keep NAT
Keep Alive Type
pinhole opened
Keep Alive Interval
Set the keep alive packet transmitting interval
Keep Authentication
Keep the authentication parameters from previous authentication
Blocking Anonymous Call Reject any incoming call without presenting caller ID
54
User Agent
Set the user agent, the default is Model with Software Version.
Specific Server Type
Set the line to collaborate with specific server type
SIP Version
Set the SIP version
Anonymous Call Standard Set the standard to be used for anonymous
Local Port
Ring Type
Set the local port
Set the ring tone type for the line
Enable user=phone
Sets user=phone in SIP messages.
Use Tel Call
Set use tel call
Auto TCP
above 1500 bytes
Enable Rport
Set the line to add rport in SIP headers
Enable PRACK
Set the line to support PRACK SIP message
DNS Mode
Select DNS mode, A, SRV, NAPTR
Using TCP protocol to guarantee usability of transport for SIP messages
Enable Long Contact
Allow more parameters in contact field per RFC 3840
Enable Strict Proxy
Enables the use of strict routing. When the phone receives packets from
the server, it will use the source IP address, not the address in via field.
Convert URI
Convert not digit and alphabet characters to %hh hex code
Use Quote in Display
Name
Whether to add quote in display name, i.e. “Fanvil” vs Fanvil
Enable GRUU
Support Globally Routable User-Agent URI (GRUU)
Sync Clock Time
Time Sync with server
With the post-call hold capture package enabled, you can see that in the
Enable Inactive Hold
INVITE package, SDP is inactive.
Caller ID Header
Set the Caller ID Header
Use 182 Response for
Call waiting
Set the device to use 182 response code at call waiting response
Enable Feature Sync
Feature Sync with server
Enable SCA
Enable/Disable SCA (Shared Call Appearance )
CallPark Number
Set the CallPark number.
Server Expire
TLS Version
Set the timeout to use the server.
Choose TLS Version.
uaCSTA Number
Set uaCSTA Number.
Enable Click To Talk
With the use of special server, click to call out directly after enabling.
Flash mode
Chose Flash mode, normal or SIP info.
Flash Info Content-Type
Set the SIP info content type.
Flash Info Content-Body Set the SIP info content body.
PickUp Number
Set the scramble number when the Pickup is enabled.
55
JoinCall Number
Set JoinCall Number.
Unregister On Boot
Whether to enable logout function.
Enable MAC Header
When opening the registration, are IP package and user agent with MAC.
When opening the registration, is user agent with MAC.
BLF Dialog Strict Match
Whether to enable accurate matching of BLF sessions.
PTime(ms)
Set whether to bring ptime field, default no.
Enable Register MAC
Header
SIP Global Settings
Strict Branch
Enable Group
Set up to strictly match the Branch field.
Set open group.
Enable RFC4475
Set to enable RFC4475.
Enable Strict UA Match
Enable strict UA matching.
Registration Failure Retry
Time
Set the registration failure retry time.
Local SIP Port
Modify the phone SIP port.
11.7 Line >> SIP Hotspot
SIP hotspot is a simple but practical function. With simple configurations, the SIP hotspot function can
implement group ringing. SIP accounts can be expanded.
The users can set functions as a SIP hotspot and other phones set (B and C) function as SIP hotspot clients.
When somebody calls phone set A, phone sets A, B, and C all ring at the same time. When any phone set
answers the call, other phone sets stop ringing. The call can be answered by only one phone set. When B or
C initiates a call, the SIP number registered by phone set A is the calling number.
To set a SIP hotspot, register at least one SIP account.
56
Picture 34 -SIP hotspot
Table 11 - SIP hotspot Parameters
Parameters
Description
If your phone is set to “SIP hotspot server”, Device Table will display as Client
Device Table which connected to your phone.
If your phone is set to “SIP hotspot client”, Device Table will display as Server
Device Table which you can connect to.
Set it to be Enable to enable the feature.
Choose hotspot, phone will be a “SIP hotspot server”; Choose Client, phone will be
a “SIP hotspot Client”
Either the Multicast or Broadcast is ok. If you want to limit the broadcast packets,
you’d better use broadcast. But, if client choose broadcast, the SIP hotspot phone
must be broadcast.
The address of broadcast, hotspot server and hotspot client must be same.
Type the Remote port number.
Device Table
SIP hotspot
Enable hotspot
Mode
Monitor Type
Monitor Address
Remote Port
服务器端设置：
57
Picture 35 - SIP hotspot server configuration
Configure SIP hotspot client:
same as those of the hotspot.
To set as a SIP hotspot client, no SIP account needs to be set. The Phone set will automatically obtain and
configure a SIP account. On the SIP Hotspot tab page, set Mode to Client. The values of other options are the
58
Picture 36 - SIP hotspot client configuration
As the hotspot server, the default extension number is 0. When the phone is used as the client, the extension
number is increased from 1, you can view the extension number through the [SIP Hotspot] page.
Call extension number:
The hotspot server and the client can dial each other through the extension number.
For example, extension 1 dials extension 0.
11.8 Line >> Dial Plan
59
Picture 37 - Dial plan settings
Table 12 - Phone dialing methods
Parameters
Description
Press # to invoke dialing
to dial out;
The user dials the other party's number and then adds the # number
Dial Fixed Length
reaches a fixed length
Timeout dial
The system dials automatically after timeout
The number entered by the user is automatically dialed out when it
Press # to Do Blind Transfer
Blind Transfer on Onhook
The user enters the number to be transferred and then presses the
"#" key to transfer the current call to a third party
After the user enters the number, hang up the handle or turn off the
hands-free function to transfer the current call to a third party.
Hang up the handle or press the hands-free button to realize the
Attended Transfer on Onhook
function of attention-transfer, which can transfer the current call to a
Enable E.164
Please refer to e. 164 standard specification
third party.
添加拨号规则：
Picture 38 - Custom setting of dial - up rules
Table 13 - Dial - up rule configuration table
60
Parameters
Description
Dial rule
Peer rules.
There are two types of matching: Full Matching or Prefix Matching. In Full
matching, the entire phone number is entered and then mapped per the Dial
In prefix matching, only part of the number is entered followed by T. The
mapping with then take place whenever these digits are dialed. Prefix mode
[ ] -- Specifies a range of numbers to be matched. It may be a range, a list of ranges separated
supports a maximum of 30 digits.
Note: Two different special characters are used.
x -- Matches any single digit that is dialed.
by commas, or a list of digits.
Destination
Set Destination address. This is for IP direct.
Set the Signal port, and the default is 5060 for SIP.
Port
Alias
item.
Note: There are four types of aliases.
all: xxx – xxx will replace the phone number.
add: xxx – xxx will be dialed before any phone number.
del –The characters will be deleted from the phone number.
rep: xxx – xxx will be substituted for the specified characters.
Set the Alias. This is the text to be added, replaced or deleted. It is an optional
Suffix
Characters to be added at the end of the phone number. It is an optional item.
Length
Set the number of characters to be deleted. For example, if this is set to 3, the
phone will delete the first 3 digits of the phone number. It is an optional item.
his feature allows the user to create rules to make dialing easier. There are several different options for dial
rules. The examples below will show how this can be used.
Example 1: All Substitution -- Assume that it can make a direct IP call to IP address 172.168.2.208. Using
this feature, 123 can be substituted for 172.168.2.208.
Picture 39 - Dial rules table (1)
Example 2: Partial Substitution -- To dial a long distance call to Beijing requires dialing area code 010 before
the local phone number. Using this feature 1 can be substituted for 010. For example, to call 62213123
would only require dialing 162213123 instead of 01062213123.
61
Picture 40 - Dial rules table (2)
Example 3: Addition -- Two examples are shown. In the first case, it is assumed that 0 must be dialed before
any 11 digit number beginning with 13. In the second case, it is assumed that 0 must be dialed before any 11
digit number beginning with 135, 136, 137, 138, or 139. Two different special characters are used.
[] -- Specifies a range of numbers to be matched. It may be a range, a list of ranges separated by commas, or
x -- Matches any single digit that is dialed.
a list of digits.
11.9 Line >> Action Plan
(video is supported)
number rules into group calls.
1. When a IP phone calls a phone, the bound IP camera synchronously transmits video to the other phone
2. When SIP calls, multicast calls or intercom calls are made, the device converts calls that conform to the
Table 14 - IP camera
Parameter
Description
Number
Type
Direction
Line
Auxiliary phone number (support video)
Support video display on call.
For call mode, incoming/outgoing call displays video
Set up outgoing lines.
Username
Bind the user name of the IP camera.
Password
Bind IP camera password.
Video streaming information;Mcast Address
URL
(mcast://IP:port)
User Agent
Set user agent information
Details refer to Fanvil Action Plan
11.10 Line >> Basic Settings
Set up the register global configuration.
Table 15 - Set the line global configuration on the web page
62
Parameters
Description
STUN Settings
Server Address
Set the STUN server address
Server Port
Set the STUN server port, default is 3478
Set the STUN binding period which can be used to keep the NAT pinhole
SIP Waiting Time
Set the timeout of STUN binding before sending SIP messages
Upload or delete the TLS certification file used for encrypted SIP
Binding Period
opened.
The TLS authentication
TLS Certification File
transmission.
11.11 Line >> RTCP-XR
RTCP-XR mode is based on RFC3611 (RTP Control Extended Report), which can measure and evaluate
network packet loss, delay and voice quality by sending RTCP-XR packets.
Parameters
VQ RTCP-XR Settings
Table 16 - VQ RTCP-XR Settings
Description
VQ RTCP-XR Session Report
VQ report on whether session mode is enabled or not.
VQ RTCP-XR Interval Report
Whether to turn on Interval mode for VQ report sending.
Period for Interval Report(5~99)
The time interval at which VQ reports are sent periodically.
Warning threshold for Moslq(15~40)
Critical threshold for Moslq(15~40)
When the phone calculated the Moslq value x10 below the
set threshold, a warning was issued.
When the phone calculates the Moslq value x10 below the
set threshold, the critical report is issued.
When the one-way delay of the phone is greater than the
When the phone computes that the one-way delay is
greater than the set threshold, the critical report is issued.
Whether to display the VQ report data for the last call
Warning Threshold for Delay(10~2000)
set threshold, warning is issued.
Critical Threshold for Delay(10~2000)
Display Report Options on web
through the web page.
11.12 Phone settings >> Features
Configuration phone features.
Table 17 - General function Settings
63
Parameters
Basic Settings
Enable Call Waiting
Description
Enable this setting to allow user to take second incoming call during an
established call. Default enabled.
Enable Call Transfer
Enable Call Transfer.
Semi-Attended Transfer
Enable Semi-Attended Transfer by selecting it
Enable Auto Onhook
mode
The phone will hang up and return to the idle automatically at hands-free
Auto Onhook Time
automatically after Auto Hand down time at hands-free mode, and play
Specify Auto Onhook time, the phone will hang up and return to the idle
dial tone Auto Onhook time at handset mode
Enable Silent Mode
When enabled, the phone is muted, there is no ringing when calls, you
can use the volume keys and mute key to unmute.
Disable Mute for Ring
When it is enabled, you can’t mute the phone
If enabled, user can assign default SIP line for dialing out rather than
Enable Default Line
SIP1.
Enable Auto Switch Line
Enable phone to select an available SIP line as default automatically
Default Ext Line
Select the default line to use for outgoing calls
If you select Ban Outgoing to enable it, and you cannot dial out any
Ban Outgoing
number.
Hide DTMF
Configure the hide DTMF mode.
Enable CallLog
Select whether to save the call log.
Enable Country Code
Whether the country code is enabled.
Country Code
Area Code
Fill in the country code.
Fill in the area code.
Enable Number Privacy
Whether to enable number privacy.
Match Direction
Start Position
Hide Digits
Allow IP Call
Matching direction, there are two kinds of rules from right to left and from
left to right.
Open number privacy after the start of the hidden location.
Turn on number privacy to hide the number of digits.
If enabled, user can dial out with IP address
P2P IP Prefix
Prefix a point-to-point IP call.
Caller Name Priority
Change caller ID display priority.
Set the device to accept Active URI command from specific IP address.
Restrict Active URI Source
More details please refer to this link
IP
http://www.fanvil.com/Uploads/Temp/download/20180920/5ba3641fe81a
5.pdf.
64
Push XML Server
determine whether to display corresponding content on the phone which
Configure the Push XML Server, when phone receives request, it will
sent by the specified server or not.
Disable this feature, user enter number will open audio channel
Enable Pre-Dial
automatically.
Enable the feature, user enter the number without opening audio channel.
Enable Multi Line
If enabled, up to 10 simultaneous calls can exist on the phone, and if
disabled, up to 2 simultaneous calls can exist on the phone.
Line Display Format
Custom line format: SIPn/SIPn: xxx/xxx@SIPn
Contact As White List Type
NONE/BOTH/DND White List/FWD White List
Block XML When Call
Disable XML push on call.
When enabled, the phone displays the information when it receives the
relevant notify content.
SIP notify
Tone Settings
Enable Holding Tone
When turned on, a tone plays when the call is held
Enable Call Waiting Tone
When turned on, a tone plays when call waiting
Play DTMF tone on the device when user pressed a phone digits at
Play DTMF tone on the device when user pressed a phone digits during
Play Dialing DTMF Tone
dialing, default enabled.
Play Talking DTMF Tone
Response Code Settings
taking, default enabled.
Busy Response Code
Set the SIP response code on line busy
Reject Response Code
Set the SIP response code on call rejection
Password Dial Settings
Enable Password Dial
Enable Password Dial by selecting it, When number entered is beginning
with the password prefix, the following N numbers after the password
prefix will be hidden as *, N stand for the value which you enter in the
Password Length field. For example: you set the password prefix is 3,
enter the Password Length is 2, then you enter the number 34567, it will
display 3**67 on the phone.
Encryption Number Length
Configure the Encryption Number length
Password Dial Prefix
Configure the prefix of the password call number
Power LED
Common
SMS/MWI
Missed
Standby power lamp state, off when off, open is always bright red. Off by
default.
The status of power lamp when there is unread short message/voice
message, including off/on/slow flash/quick flash, default slow flash.
The state of the power lamp when there is a missed call, including
65
Talk/Dial
Ringing
Mute
Hold/Held
off/on/slow flash/quick flash, the default slow flash.
In the talk/dial state, the power lamp state, off is off, on is always red
Power lamp status when there is an incoming call, including off/on/slow
Power lamp status in mute mode, including off/on/slow flash/quick flash,
bright, the default is off.
flash/quick flash, default flash.
off by default.
by default when left/retained.
The power lamp state, including off/on/slow flash/quick flash, is turned off
Notification Popups
11.13 Phone settings >> Media Settings
Change voice Settings.
Table 18 - Voice settings
Parameters
Description
Select enable or disable voice encoding:
Codecs Settings
G.711A/U,G.722,G.729, G.726-16,G726-24,G726-32,G.726-40,
ILBC, Opus
Audio Settings
Handset Volume
Default Ring Type
Set the Handset volume, the value must be 1~9
Configure default ringtones. If no special ringtone is set for the phone
number, the default ringtone will be used.
Speakerphone Volume
Set the hands-free volume to 1-9.
Speakerphone Ring Volume Set the volume of hands-free ringtone to 1~9.
G.723.1 Bit Rate
5.3kb/s or 6.3kb/s is available.
DTMF Payload Type
Enter the DTMF payload type, the value must be 96~127.
AMR Payload Type
Set AMR load type, range 96~127.
Opus playload type
Set Opus load type, range 96~127.
OPUS Sample Rate
Set Opus sampling rate, including opus-nb (8KHz) and opus-wb (16KHz).
ILBC Payload Type
Set the ILBC Payload Type, the value must be 96~127.
ILBC Payload Length
Set the ILBC Payload Length
Enable MWI Tone
Enable VAD
Onhook Time
When there is a new voice message message, the phone will start a
special dial tone.
Whether voice activity detection is enabled.
Configure a minimum response time, which defaults to 200ms
RTP Control Protocol(RTCP) Settings
66
CNAME user
CNAME host
RTP Settings
RTP keep alive
Value
Ring Type
Alert Info Ring Settings
Set CNAME user
Set CNAME host
Hold the call and send the packet after 30s
Set the value to specify the ring type.
Type1-Type9
11.14 Phone settings >> MCAST
This feature allows user to make some kind of broadcast call to people who are in multicast group. User can
configure a multicast DSS Key on the phone, which allows user to send a Real Time Transport Protocol (RTP)
stream to the pre-configured multicast address without involving SIP signaling. You can also configure the
phone to receive an RTP stream from pre-configured multicast listening address without involving SIP
signaling. You can specify up to 10 multicast listening addresses.
Picture 41 - MCAST
Table 19 - Multicast parameters
Parameters
Description
Normal Call Priority
Define the priority of the active call, 1 is the highest priority, 10 is the lowest.
Enable Page Priority
The voice call in progress shall take precedence over all incoming paging
67
Name
Host: port
calls.
Listened multicast server name
Listened multicast server’s multicast IP address and port.
Note! Action urls are used for IPPBX systems to submit phone events. Please refer to Fanvil Action
11.15 Phone settings >> Action
Action URL
URL for details.
http://www.fanvil.com/Uploads/Temp/download/20180920/5ba3641fe81a5.pdf
11.16 Phone settings >> Time/Date
The user can configure the time Settings of the phone on this page.
Table 20 - Time&Date settings
Parameters
Description
Network Time Server Settings
Time Synchronized via SNTP
Enable time-sync through SNTP protocol
Time Synchronized via DHCP
Enable time-sync through DHCP protocol
Primary Time Server
Set primary time server address
Secondary Time Server
reachable, the device will try to connect to secondary time server to
Set secondary time server address, when primary server is not
get time synchronization.
Select the time zone
Time of re-synchronization with time server
12-Hour Clock
Set the time display in 12-hour mode
Date Format
Select the time/date display format
Daylight Saving Time Settings
Time Zone
Resync Period
Local
DST Set Type
Choose your local, phone will set daylight saving time automatically
based on the local
Choose DST Set Type, if Manual, you need to set the start time and
Fixed Type
rule dates for conversion. Display in read-only mode in automatic
Daylight saving time rules are based on specific dates or relative
end time.
mode.
Offset
The offset minutes when DST started
68
Month Start
Week Start
Weekday Start
Hour Start
Minute Start
Month End
Week End
Weekday End
Hour End
Minute End
The DST start month
The DST start week
The DST start weekday
The DST start hour
The DST start minute
The DST end month
The DST end week
The DST end weekday
The DST end hour
The DST end minute
Manual Time Settings
You can set your time manually
11.17 Phone Settings >> Time Plan
Details refer to Fanvil Time Plan
11.18 Phone settings >> Tone
This page allows users to configure a phone prompt.
69
You can either select the country area or customize the area. If the area is selected, it will bring out the
following information directly. If you choose to customize the area, you can modify the button tone, call back
tone and other information.
11.19 Phone settings >> Advanced
Picture 42 - Tone settings on the web
User can configure the advanced configuration settings in this page.
Screen Configuration.
Set the brightness level in use from 1 to 16,
Set the brightness level in the energy-saving mode from 0 to 16
Set the backlight time to 30 seconds by default. You can turn it off or select 15 seconds /30 seconds
/45 seconds /60 seconds /90 seconds /120 seconds
The screen saver can be turned
Timeout to Screensaver
Web interface: enter [phone setting] >> [advanced], edit screen parameters, and click submit to save.
70
UI 显示
空闲时间字体
默认标题字体
Softkey 字体
滚动条
警告主题
通知主题
通话字体
Hotel profile Font
Standby custom Font
欢迎词
Picture 43 - Page screen Settings
The greeting message will display on the top left corner of the LCD when the device is idle, which is limited to
16 characters. The default chars are ‘VOIP PHONE’.
酒店概况
自定义显示
11.20 Phonebook >> Advanced
Users can export the local phone book in XML, CSV, and VCF format and save it on the local computer.
Users can also import contacts into the phone book in XML, CSV, and VCF formats.
Attention! If the user imports the same phone book repeatedly, the same contact will be ignored. If
the name is the same but the number is different, the contact is created again.
Users can delete groups or add new groups on this page. Deleting a contact group does not delete contacts
in that group.
71
11.21 Call Log
The user can browse the complete call record in this page. The call record can be sorted by time. Call number,
contact name or line, and the call record can be screened by call record type (incoming call, outgoing call,
missed call, forward call).
11.22 Function Key >> Softkey
The User Settings mode and display style, display page.
Parameter
Description
Table 21 - Softkey configuration
Softkey mode
Disabled and More，Default is Disabled
Softkey display style
Softkey Exit on Left or Right
Softkey Mode
Softkey Style
Screen
Call Dialer
Desktop
2aB/Delete/Exit/Call Back/Dial/MWI/Dialed/Pause/Next line/Prev
line/Audio/Video/DSS Key
Prev Account/Next Account/Call Back/Call
Forward/DND/MWI/Reboot/Redial/Status/Network/DSS Key
Divert Dialed
Send/2aB/Delete/Exit/Forward/Clear/DSS Key
Ending
Redial/End/Release/DSS Key
Dial/2aB/Delete/Exit/Call
Predictive Dialer
Back/Pickup/MWI/Release/Pause/Dialed/Video/Audio/Next line/Prev line/DSS
Key
key
Next call/Prev call/Answer/Forward/Reject/Mute/Release/Video/Audio/DSS
Ringing
Talking
Trying
Waiting
Hold/Transfer/End/Mute/Release/New Call/Listen/Next call/Prev call/
Private/Headset/Video/Audio/DSS Key
Transfer Alerting
End/Transfer/Release/DSS Key
Transfer Dialer
Delete/Exit/2aB/Dial/Transfer/Clear/Missed/Pause/Video/Audio/DSS Key
End/Release/DSS Key
Next call/Prev call/ Release /Answer/Transfer/Forward/Hold/End/Mute/New
call/Reject/Prev call/Listen/Video/Audio/DSS Key
You can customize the configuration, Softkey functions and Settings on the web page.
72
Table 22 - Side Key configuration
Parameters
Description
Presence: the Presence is able to view whether the user is online.
Note: You cannot subscribe the same number for BLF and Presence at the same time
Speed Dial: You can call the number directly which you set. This feature is convenient
Memory Key
for you to dial the number which you frequently dialed.
Intercom: This feature allows the operator or the secretary to connect the phone
quickly; it is widely used in office environments.
Line
It can be configured as a Line Key. User is able to make a call by pressing Line Key.
User can select a key event as a shortcut to trigger.
For example: Redail / END / Hold / etc.
It allows user to dial or edit dial number easily.
Open the specific URL directly.
Key Event
DTMF
URL
Multicast
Configure the multicast address and audio codec. User presses the key to initiate the
multicast.
XML browser
Users can set the DSS Key for specific URL download and other operations.
11.23 Security >> Web Filter
The user can set up a configuration management phone that allows only machines with a certain network
segment IP access.
Picture 44 - Web Filter settings
73
Picture 45 - Web Filter Table
Adding and removing IP segments are accessible. Configure the starting IP address within the start IP, end
the IP address within the end IP, and click [Add] to submit to take effect. A large network segment can be set,
or it can be divided into several network segments to add. If the user wants to delete, select the initial IP of the
network segment to be deleted from the drop-down menu, and then click [Delete] to take effect.
Enable web page filtering: configure enable/disable web page access filtering; Click the "apply" button to take
effect.
log in the web page.
Note: if the device you are accessing is in the same network segment as the phone, please do not configure
the filter segment of the web page to be outside your own network segment, otherwise you will not be able to
11.24 Security >> Trust Certificates
Set whether to open license certificate and general name validation, select certificate module.
You can upload and delete uploaded certificates.
Picture 46 - Certificate of settings
11.25 Security >> Device Certificates
Select the device certificate as the default and custom certificate.
74
You can upload and delete uploaded certificates.
11.26 Security >> Firewall
Picture 47 - Device certificate setting
Picture 48 - Network firewall Settings
The user can set whether to enable the input through this page, output firewall and set the firewall input and
output rules. Using these Settings can prevent some malicious network access, or restrict internal users
access to some resources of the external network, which can improve security.
Firewall rule set is a simple firewall module. This feature supports two types of rules: input rules and output
75
rules. Each rule is assigned an ordinal number, allowing up to 10 for each rule.
Considering the complexity of firewall Settings, the following is an example to illustrate:
Table 23 - Network Firewall
Parameter
Description
Enable Input Rules
Indicates that the input rule application is enabled.
Enable Output Rules
Indicates that the output rule application is enabled.
Input/Output
Deny/Permit
Protocol
To select whether the currently added rule is an input or output rule.
To select whether the current rule configuration is disabled or allowed;
There are four types of filtering protocols: TCP | UDP | ICMP | IP.
Src Port Range
Filter port range
Src Address
0.0.0.0; It can also be a network address similar to *.*.*.0, such as:
Source address can be host address, network address, or all addresses
192.168.1.0.
192.168.1.0.
Dst Address
address 0.0.0.0; It can also be a network address similar to *.*.*.0, such as:
The destination address can be either the specific IP address or the full
Src Mask
means that the host is specific. When set as 255.255.255.0, it means that a
Is the source address mask. When configured as 255.255.255.255, it
network segment is filtered.
Is the destination address mask. When configured as 255.255.255.255, it
Dst Mask
means the specific host. When set as 255.255.255.0, it means that a
network segment is filtered.
After setting, click [Add] and a new item will be added in the firewall input rule, as shown in the figure below:
Picture 49 - Firewall Input rule table
Then select and click the button [Apply].
In this way, when the device is running: ping 192.168.1.118, the packet cannot be sent to 192.168.1.118
because the output rule is forbidden. However, the other IP of the ping 192.168.1.0 network segment can still
receive the response packet from the destination host normally.
76
Picture 50 - Delete firewall rules
Select the list you want to delete and click [Delete] to delete the selected list.
11.27 Device Log >> Device Log
You can grab the device log, and when you encounter an abnormal problem, you can send the log to the
technician to locate the problem. See 13.6 Get log information.
77
12 Trouble Shooting
When the phone is not in normal use, the user can try the following methods to restore normal operation of
the phone or collect relevant information and send a problem report to Fanvil technical support mailbox.
12.1 Get Device System Information
Users can get information by pressing the [Network] >> [Phone] option in the phone.The following
Equipment information (model, software and hardware version), etc.
information will be provided:
The network information
12.2 Reboot Device
supply and restore it again.
Users can use the webpage [system] >> [Reboot System] and press [ok], or simply remove the power
12.3 Reset Device to Factory Default
Resetting Device to Factory Default will erase all the user’s configuration, database and profiles on the device
and restore the device back to the state as factory default.
User restore factory reset press [system] >> [Configuration] >> [Reset Phone] and press [reset].The
phone will revert to the factory default state.
12.4 H5W Screenshot
If there is a problem with the phone, the screenshot can help the technician locate the function and identify
the problem. In order to obtain screen shots, log in the phone webpage [System] >> [Tools], and you can
capture the pictures of the screen (you can capture them in the interface with problems).
78
12.5 Network Packets Capture
Picture 51 - Screenshot
Sometimes it is helpful to dump the network packets of the device for issue identification. To get the packets
dump of the device, user needs to log in the device web portal, open page [System] >> [Tools] and click
[Start] in “Network Packets Capture” section. A pop-up message will be prompt to ask user to save the
capture file. User then should perform the relevant operations such as activating/deactivating line or making
phone calls and click [Stop] button in the web page when operation finished. The network packets of the
device during the period have been dumped to the saved file.
User may examine the packets with a packet analyzer or send it to Fanvil support mailbox.
Picture 52 - Web capture
79
12.6 Get Log Information
Log information is helpful when encountering an exception problem. In order to get the log information of the
phone, the user can log in the phone web page, open the page [Device log], click the [Start] button, follow
the steps of the problem until the problem appears, and then click the [End] button, [Save] to local analysis or
send the log to the technician to locate the problem.
12.7 Common Trouble Cases
Trouble Case
Solution
Table 24 - Trouble Cases
Device could not boot up
and check if device is well connected to power source.
1. The device is powered by external power supply via power adapter or
PoE switch. Please use standard power adapter provided
by manufacturer or PoE switch met with the specification requirements
2.
If you saw “POST MODE” on the device screen, the device system
image has been damaged. Please contact location technical support to
help you restore the phone system.
1. Please check if device is well connected to the network. The network
Ethernet cable should be connected to the
[Network] port NOT
the
[PC] port. If the cable is not well connected to the network icon
[WAN disconnected] will be flashing in the middle of the screen.
2. Please check if the device has an IP address. Check the system
Device could not register to a
information, if the IP displays “Negotiating…”, the device does not have
service provider
an IP address. Please check if the network configurations is correct.
3.
If network connection is fine, please check again your line
configurations. If all configurations are correct, please kindly contact
your service provider to get support, or follow the instructions in “13.5
Network Packet Capture” to get the network packet capture of
registration process and send it to manufacturer support to
analy manufacturer ze the issue.
1. Please check if Handset is connected to the correct
2. The network bandwidth and delay may be not suitable for audio call at
This is usually due to loud volume feedback from speaker to microphone.
Please lower down the speaker volume a little bit, the chopping will be
No Audio or Poor Audio in
Handset
the moment.
Audio is chopping at far-end
in Hands-free speaker mode
gone.
80
Blank
81
| 1 | Label | ID Label/Location Info | 186.84 KiB | January 13 2021 |
CTC Laboratories, Inc. 1-2/F., Building 2, Jiaquan Building, Guanlan High-Tech Park, Shenzhen, Guangdong, China Tel: +86-755- 27521059 Fax: +86-755- 27521011 Http://www.sz-ctc.org.cn Label Label Location 1. Page 1 of 1
| 1 | Cover letter | Cover Letter(s) | 190.05 KiB | January 13 2021 |
Fanvil Technology Co., Ltd DATE Equipment Autorisation Division Federal Communications Commission 7435 Oakland Mills Road Columbia, MD 21046 FCC ID: 2APPZ-H5W Product Name:__ IP Phone Request for Confidentialit Pursuant to Sections 0.457 and 0.459 of the commissions rules, we hereby request that the following documents be held confidential:
(List here the documents for which you are seeking confidentiality for example ...) e Schematics e Block diagram e Operation description As well as short-term confidential treatment of information accompanying this application for a period of 180 days after grant is issued as outlined below:
Internal Photos Users Manual External Photos Test Set-up Photos These materials contain trade secrets and proprietary information and are not customarily released to the public. The public disclosure of this information might be harmful to the company and provide unjustified benefits to our competitors. Dated this 2020.12.28 By: di y: Pere A A on Benedict Chen Printed Title: _Product Manager On behalf of : Fanvil Technology Co., Ltd Telephone: _86-0755-26402199
| frequency | equipment class | purpose | ||
|---|---|---|---|---|
| 1 | 2021-01-13 | 2412 ~ 2462 | DTS - Digital Transmission System | Original Equipment |
| app s | Applicant Information | |||||
|---|---|---|---|---|---|---|
| 1 | Effective |
2021-01-13
|
||||
| 1 | Applicant's complete, legal business name |
Fanvil Technology Co., LTD.
|
||||
| 1 | FCC Registration Number (FRN) |
0027493469
|
||||
| 1 | Physical Address |
10/F Block A, Dualshine Global Science Innovation Honglang North 2nd Road, Bao'an District
|
||||
| 1 |
10/F Block A, Dualshine Global Science Innovation
|
|||||
| 1 |
Shenzhen, N/A
|
|||||
| 1 |
China
|
|||||
| app s | TCB Information | |||||
| 1 | TCB Application Email Address |
s******@nemko.com
|
||||
| 1 | TCB Scope |
A4: UNII devices & low power transmitters using spread spectrum techniques
|
||||
| app s | FCC ID | |||||
| 1 | Grantee Code |
2APPZ
|
||||
| 1 | Equipment Product Code |
H5W
|
||||
| app s | Person at the applicant's address to receive grant or for contact | |||||
| 1 | Name |
B**** C****
|
||||
| 1 | Title |
Product Manager
|
||||
| 1 | Telephone Number |
86-07********
|
||||
| 1 | Fax Number |
86-07********
|
||||
| 1 |
b******@fanvil.com
|
|||||
| app s | Technical Contact | |||||
| n/a | ||||||
| app s | Non Technical Contact | |||||
| n/a | ||||||
| app s | Confidentiality (long or short term) | |||||
| 1 | Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | Long-Term Confidentiality Does this application include a request for confidentiality for any portion(s) of the data contained in this application pursuant to 47 CFR § 0.459 of the Commission Rules?: | Yes | ||||
| 1 | If so, specify the short-term confidentiality release date (MM/DD/YYYY format) | 07/12/2021 | ||||
| if no date is supplied, the release date will be set to 45 calendar days past the date of grant. | ||||||
| app s | Cognitive Radio & Software Defined Radio, Class, etc | |||||
| 1 | Is this application for software defined/cognitive radio authorization? | No | ||||
| 1 | Equipment Class | DTS - Digital Transmission System | ||||
| 1 | Description of product as it is marketed: (NOTE: This text will appear below the equipment class on the grant) | IP Phone | ||||
| 1 | Related OET KnowledgeDataBase Inquiry: Is there a KDB inquiry associated with this application? | No | ||||
| 1 | Modular Equipment Type | Does not apply | ||||
| 1 | Purpose / Application is for | Original Equipment | ||||
| 1 | Composite Equipment: Is the equipment in this application a composite device subject to an additional equipment authorization? | No | ||||
| 1 | Related Equipment: Is the equipment in this application part of a system that operates with, or is marketed with, another device that requires an equipment authorization? | No | ||||
| 1 | Grant Comments | Power output listed is conducted. This device has a 20 MHz and 40 MHz bandwidth mode. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other transmitter. End-users and installers must be provided with antenna installation instructions and transmitter operating conditions for satisfying RF exposure compliance. | ||||
| 1 | Is there an equipment authorization waiver associated with this application? | No | ||||
| 1 | If there is an equipment authorization waiver associated with this application, has the associated waiver been approved and all information uploaded? | No | ||||
| app s | Test Firm Name and Contact Information | |||||
| 1 | Firm Name |
CTC Laboratories, Inc.
|
||||
| 1 | Name |
W******** C****
|
||||
| 1 | Telephone Number |
+8675******** Extension:
|
||||
| 1 |
s******@sz-ctc.com.cn
|
|||||
| Equipment Specifications | |||||||||||||||||||||||||||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Line | Rule Parts | Grant Notes | Lower Frequency | Upper Frequency | Power Output | Tolerance | Emission Designator | Microprocessor Number | |||||||||||||||||||||||||||||||||
| 1 | 1 | 15C | 2412.00000000 | 2462.00000000 | 0.0865000 | ||||||||||||||||||||||||||||||||||||
some individual PII (Personally Identifiable Information) available on the public forms may be redacted, original source may include additional details
This product uses the FCC Data API but is not endorsed or certified by the FCC