Call transfer Attended transfer:
Voice mail 1. To access your voice mailbox, press or Menu
> Message > Voice Message, number of messages will be indicated if provided by your server or pbx. 1. Press key or Xfer soft key during the active conversation, the call is put on hold. 2. Dial the second telephone number. 2. Select the line and press Play to call. 3. When the call is answered, then press key or Xfer soft key to complete the operation. Bluetooth Blind transfer:
1. Press key or Xfer soft key during the active conversation, the call will be on hold. 2. Then enter the 2nd telephone number and press key or Xfer soft key. Call forward 1. Press Menu > Features > Call Forward. 2. Select the line, the type of forward, enter the destination number and status, and press OK soft key. Call conference 1. Press Menu > Basic > Bluetooth. 2. Press OK soft key to enter the bluetooth open interface. After opening, press Scan soft key to display the list of bluetooth scanned.Select any device and press connect. Wi-Fi 1. Plug the WiFi Dongle. Press Menu > Basic > WLAN. 2. Press OK soft key to enter the WLAN open interface. After opening, press Scan soft key to display the list of Wi-Fi scanned. 3. Press Enter soft key to enter the available Network, select the wireless network, press the Connect soft key and enter the password to connect. 1. Once in line with 1st caller, press key or Conf soft key, 1st caller is put on hold. Call list 2. Then call the 2nd number. 3. After, 2nd call is established, press key or Conf soft key to set up the conference. Programmable keys 1. Press key or Menu > CallLog > Local Call Logs. 2. Scroll through the list using . 3. To dial an entry, press Dial soft key or pickup handset or press or . 1. You can configure shortcuts for the programmable keys. 2. Press Menu > Basic > Keyboard, select among the configurable items, and select your desired type and value, press OK key. Phonebook Access phonebook:
Do not disturb 1. Press DND soft key, and enable the device do not disturb mode. 2. Or press Menu > Features > DND, and select the Mode and Type, and press OK soft key. 1. Press or Contact soft key or Menu > Contact > Local Contacts. 2. Select All Contacts or other group. 3. To dial an entry, press Dial soft key or pickup handset or press or . Add new entry:
1. Press Contact soft key, Press All Contacts or other group
> Press Add. 2. Enter name and number and press OK soft key. Regulatory Compliance Federal Communication Commission (FCC) USA This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions:(1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipmentgenerates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, itmay cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. Warning: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the users authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the bottom of this equipment is a label that contains, among other information, a product identifier in the format US: 3I1IPNANX5UV2. If requested, this number must be provided to the telephone company. Fanvil Technology Co., Ltd Website: www.fanvil.com EMail: sales@fanvil.com support@fanvil.com Tel: +86-755-2640-2199 Fax: +86-755-2640-2618 Add: 10/F Block A, Dualshine Global Science Innovation Center, Honglang North 2nd Road, Bao'an District, Shenzhen, China
- 4 -
V1.01 X5U V2 Quick Installation Guide Fanvil Technology Co., Ltd www.fanvil.com Rev: B-V2 Packaging list Installation the device Configuration Please follow the instructions in below picture to install the device. Bracket desktop installation Handset Cord Ethernet Cable Quick Installation Guide IP Phone Handset Stand Power Adapter
(Optional) Wall Stand
(Buy separately) Wall mounting (Wall Stand need buy separately) Screen icon In hands-free mode Call forward activated SMS New SMS Dialed call(s) In headset mode In handset mode Disable do not disturb (Blue) Do not disturb activated (Red) Mute activated SIP hotspot activated Silent mode VLAN activated Call is on hold VPN activated Auto-answering activated Bluetooth device paired connection New VM messages Internet connected Voice quality level of call Keypad locked Forward call(s) Missed call(s) Internet is disconnected X
No IP address Wireless network connected Wireless network disconnected Received call(s) Wireless network failure Less than 2m Connecting to the Device Please connect power adapter, network, PC, handset, and headset to the corresponding ports as described in below picture. USB port: connect USB device (USB flash drive, WiFi dongle). Power port: connect the power adapter. Network port: connecting local area network or Internet. PC port: the network port connect to the computer. Headset port: connect headset. Handset port: connect IP Phone handset. Keys features Line keys Soft keys Message waiting indicator Left and right navigation keys Up navigation key, Shortcut to call log Down navigation key, Shortcut to Status OK key, Shortcut to Menu Hold key, Hold/Resume the call Call transfer key Conference key Voice messages key Headset key, activate/deactivate headset DSS Keys, It can be set as line key
/function key/speed dial key, etc. Page-Jump key, It can switch the vice screen DSS pages
- 2 -
Redial key, access to redial the last record In idle mode: activate/deactivate silent mode In communication mode: mute/
un-mute a call In idle mode or during ringing:
increase or decrease ringer volume In communication:
increase or decrease earpiece, headset or hands-free volume Hand-free key, activate/deactivate hands free Long press to lock keypad. Enter PIN to unlock keypad
(default 123) Configuration via LCD menu of phone 1. Press Menu > System (Default password 123). 2. Select Network: To configure the Network Settings
(IPv4/IPv6/IPv4&IPv6, DHCP/Static/PPPoE). 3. Select Accounts: To configure enable the account, fill the SIP server address, port, user name, password etc. 4. Save the configuration. Configuration via Web 1. Get the IP address from the phone: Press key, or Menu
> Status > ETH IP. 2. Loogin: Input the IP address in the web browser. The PC and phone should be in the same IP address segment(The default username and password are both admin.) 3. Configure: Select network/Account etc, and fill the relevant content. 4. Save the configuration. Language setting 1. Press Menu key > Basic > Language. 2. Select the desired language and press OK soft key. Making a call 1. Pre-dialing: enter the phone number and pick up the handset. 2. Direct dialing: lift the handset and enter the phone number. 3. Handsfree: enter phone number and press or vice versa. 4. Headset: enter phone number and press or vice versa. 5. Designated line: press line key, enter phone number and press dial key. Accepting a call 1. Using the handset: pick up the handset. 2. Using the headset: press . 3. Using the handsfree: press . Redial 1. Press redial a call number. Call Mute 1. Press to Mute the microphone during the call. 2. Press again to un-mute the conversation. Putting a call on hold 1. Press key or Hold soft key, caller is put on hold. 2. To retrieve the call press key or Resume soft key. Note: with more than one active call, select desired call with the navigator keys and use the corresponding soft key to hold or resume.
- 3 -