QUICK START GUIDE 433-MHz RANGER LONG-RANGE WRT-2+/WRT-4+/WRT-2M WIRELESS RADIO TRANSMITTERS This Quick Start Guide is intended for experienced installation technicians. It is a basic reference to ensure all installations are properly made. 1.0 Description Wireless Radio Transmitters and Long Range Receivers with an integrated receive antenna comprise Farpointe Datas high frequency, long-range identification solution known as Ranger. Intended for security access control applications, Rangers wireless communication is based upon a secure, digital, anti-playback routine. Ranger Transmitters are available in two- or four-button configurations, with each button corresponding to its own Wiegand output on the Ranger Receiver. Each Transmitter includes an integrated red LED, used to indicate both positive button press and battery strength. The WRT-2+ and WRT-4+ Transmitters are also equipped standard with a potted proximity or contactless smartcard module allowing the Transmitter to also be used as a close-range access credential. These Transmitters ship standard with a proximity module offering technology support of certain Pyramid Series Proximity, HID or AWID standard 125-kHz proximity readers, or with a contactless smartcard module (such as MIFARE Classic 1K or 4K, as well as DESFire EV1 or EV2) offering technology support of certain Delta Contactless Smartcard Readers. The WRT-2M Transmitter does not include a proximity or contactless smartcard module. Instead it can be fitted with an adhesive disc tag, such as Farpointes model PDT-1that adheres to the back of the Transmitterwhich also allows it to be used as a close-range access credential. Disc tags, which are sold separately, are available in the same proximity or contactless smartcard formats as noted above. 2.0 Transmitter Layouts Red LED Buttons
(four on WRT-4+
two on WRT-2+
and WRT-2M) Key Ring Holder ID Label ID Label and Mounting Location of Adhesive Disc Tag
(sold separately) Model WRT-4+
Model WRT-2+
1.4"W 2.5"H .52"D
(35.6 mm 63.5 mm 13.2 mm) Model WRT-2M 1.4"W 1.95"H .47" D
(35.6 49.5 11.9 mm) 3.0 Output Formats Transmitters are sequentially coded in either the industry standard 26-bit Wiegand format or custom Wiegand formats, with exact number sequences. As a cross reference the Transmitters internal ID number is printed on the ID label found on the back of the Transmitter. Specific coding details, including format, facility code, and ID range can be found on the Transmitter shipping box, as well as the shipments packing list. 4.0 Time-Out Ranger transmitters make use of a time-out feature to preserve battery life and prevent interference with other transmitters on the field. When a button is held down continuously the transmitter will transmit the code once and shutdown and will power up once the button is released. 5.0 Battery Replacement Transmitters include a replaceable CR2032, 3.3V, lithium battery1. The battery should be replaced when a button press does not result in a flash of the LED, reliable read range, and/or an output from the Receiver. To replace the battery, follow the directions below:
1. Using a coin, place it in the gap (2-piece unit) near the key ring holder and twist to pop the transmitter open. 2. Remove the old battery2. 3. Insert the new CR2032, 3.3V, lithium battery. Be sure the plus (+) side of the battery is facing up (visible when installed). 4. Snap both pieces together. QUICK START GUIDE 433-MHz RANGER LONG-RANGE WRT-2+/WRT-4+/WRT-2M WIRELESS RADIO TRANSMITTERS 6.0 Range3 Read range between the Transmitter and Receiver depends on the Receiver model being used. Please review the Ranger Receiver datasheet for more information. 7.0 Troubleshooting Issue/Possible Cause No data received/Transmitter not enrolled Short read range/Receiver potentiometer Some buttons not working/Receiver capability Prox insert not working/Compatibility Red LED does not flash upon button press Corrective Action Transmitter must be clicked twice to be learned by the Receiver upon initial Receiver power up Adjustable potentiometer should be set to the maximum setting (certain models only) Receiver Model WRR-22 only works with buttons 1 and 2 Support with HID and AWID 125-kHz Proximity Protocol readers must be requested on PO With WRT-2M, does not include a proximity or contactless smartcard module. Adhesive disk tags are sold separately. Check that battery is installed correctly and is not dead (fully discharged) Should any of the corrective actions mentioned above not improve performance, please contact Farpointe directly. 1. This lithium battery is widely available, and commonly used in electronic devices, including cameras and remote controls. 2. Dispose of the battery according to local requirements. Recycle when possible. 3. For best performance the Transmitter should be used as far from interference sources as possible. These sources may include, but are not limited to, large metal obstructions, such as duct work and appliances, as well as magnetic fields and radio emissions. Many Farpointe Data Readers carry the following certifications:
FCC Compliance Statement: This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Caution: Changes or modifications not expressly approved by Farpointe Data could void the user's authority to operate the equipment. Product can be used without license conditions or restrictions in all European Union coun-tries, including Austria, Belgium, Bulgaria, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Poland, Portugal, Romania, Slovakia, Spain, Sweden, United Kingdom, as well as other non-EU countries, including Iceland, Norway, and Switzerland. Cet appareil est conforme Industrie Canada exempts de licence standard RSS (s). Le fonctionnement est soumis aux deux conditions suivantes : (1) ce dispositif ne peut pas provoquer dinterfrences et (2) ce dispositif doit accepter toute interfrence, y compris les interfrences qui peuvent causer un mauvais fonctionnement du dispositif. Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause unde-sired operation of the device. 9 1 6 0
. v e R 1 0 0
-
2 0 6 1 0
:
N P
/
Farpointe Data reserves the right to change specifications without notice. 2012-2019 Farpointe Data, Inc. All rights reserved. Farpointe Data, Pyramid Series Proximity, Delta, Ranger, and CONEKT are the registered U.S. trademarks of Farpointe Data, Inc. MIFARE is a registered trademark of NXP B.V. AWID is a registered trademark of Applied Wireless Identifications Group. HID and the HID logo are registered trademarks of HID Global Corporation, an ASSA ABLOY company. All other trademarks are the property of their respective owners. Farpointe Data, Inc. 2195 Zanker Road San Jose, CA 95131 USA Office: +1-408-731-8700 Fax: +1-408-731-8705 support@farpointedata.com www.farpointedata.com