FCC ID: WY2-PP4330 Audio Display

Owner's Manual PP-4330 Table of contents E n g l i s h 1. System Overview 2 Control of This Unit 2 Steering Remote Control 3 Silver box to supply power and simulate some signals 4 2. Common Operations 5 Home Menu 5 Audio Source Switch 5 Displays 6 Settings 6 Connections 7 Informations 7 3. Bluetooth Operations 8 Bluetooth Settings 8 Phone Settings 9 Bluetooth Phone Operations 11 Bluetooth Audio Operations 15 4. iPod Operations 17 iPod Connection 17 iPod Mode Selection 17 5. Using Apple CarPlay 19 6. Using Siri 20 7. Using Android Auto 20 8. Declaration of conformity 21 1 1. System Overview 7 [TEL] button: press to switch to the Bluetooth phone Control of This Unit menu screen. 8 [BACK] button: press to return to the previous screen. 9 [TUNE]/[SCROLL] knob: rotate to tune up/down, track up/down; press to switch sound.

[SETTING] button: press to enter the setting screen. 9 5432 6 87

(Fig 1-1) 1 [POWER] button: press to turn audio playback on/off.

[VOLUME] knob: rotate to turn volume up/down. 2 [AUDIO] button: press to enter the audio source or audio playback screen. 3 [x]: track / folder down;

[v] button: track / folder up. 4 [MENU] button: press to enter the home menu screen. 5 [CAMERA] button: open camera setting. 6 [Day/Night] button: (short) change night mode;

(long) display OFF 1 2 Steering Remote Control 1 2 6 3 4 5 7 8 1 [+] button: volume up. 2 [-] button: volume down. 3 [x]: track / folder down 4 [v] button: track / folder up. 5 [BACK] button: press to return to the previous screen. 6 [OK] button: press to enter the audio source or audio playback screen. 7 [VR] button: start Siri. 8 [

] button: press to switch to the Bluetooth phone menu screen or press to hang up the calling. 3 Silver box to supply power and simulate some signals PKB Switch and Navion Switch These LEDS lights when each switchs(+B, ACC, IGN) become to turn on

+B Switch, ACC Switch and IGN Switch NOT USE the INPUT of +14V NOT USE NOT USE NOT USE Speed Knob NOT USE. Please make usre to turn off these test switches. Turning on+B and ACC switch is as same as key position is ACC Turning on+B and ACC and IGN switch is as same as key position is on 4 2. Common Operations Home Menu 1 Press the [MENU] button to enter the main menu screen.

(Fig 2-1-1) For the CarPlay Audio, Bluetooth Audio and iPod touchkeys, you shoud customize the home menu. Customize Home Menu In the home munu screen ((Fig 2-1-1) page 5), please touch Customize Home Menu to customize the home menu. 1

(Fig 2-1-2)

(Next page) 1 2

(Fig 2-1-3) 1 widget icons 2 function icons Drag an icon from the top area to the bottom area. Audio Source Switch 1 While in the audio playback screen, press [AUDIO] button to enter the audio source screen. This unit supports AM/FM, SiriusXM, USB/iPod, Bluetoot Audio, Apple CarPlay and Android Auto audio source plackback.

(Fig 2-2-1) 5 Displays The audio source playback can be displayed in the main display, home menu widget display and the meter display. Main display

(Fig 2-3-2) Settings 1 Press the [SETTING] button to enter the settings screen.

(Fig 2-3-1) Home Menu Widget Display For the widget display, please go to the customized home menu ((Fig 2-1-2) page 5) to customize the widget display.

(Fig 2-3-3) Meter Display Some information is displayed in this area. Bluetooth audio playback, iPod , Apple CarPlay music or Bluetooth phone call information is displayed, too. 1 Please press the [X] or [V] button of the steering remote control to switch the menu item.

(Fig 2-4-1)

(Fig 2-4-2) Sound Settings 1 In the settings screen((Fig 2-4-1) page 6), please touch Sound to enter the sound settings screen. 6

(Fig 2-3-4)

(Fig 2-4-3) Language Settings 1 In the settings screen((Fig 2-4-2) page 6), touch Others and then Language to enter the language set-

tings screen. Connections 1 In the settings screen((Fig 2-4-

1) page 6), please touch Connections to enter the connections screen. information of connected Apps. Informations 1 In the settings screen((Fig 2-4-1) page 6), please touch Info to enter the information screen.

(Fig 2-6-1) 2 Touch System Information to check the system information.

(Fig 2-5-1) G Bluetooth : touch to pair, connect or delete Bluetooth device. G Wi-Fi : touch to connect Wi-Fi. G USB : touch to view the information of connected USB. G Apps : touch to view the

(Fig 2-6-2) 7 3. Bluetooth Operations Bluetooth Settings 3 In the settings screen((Fig 2-4-

1) page 6), please touch Connections to enter Bluetooth connections screen.

(Fig 3-1-2) 4 Touch to enter the Bluetooth settings screen. G Bluetooth : Bluetooth on or off. G Allow 2 Phones Simultaneously : allow connect 2 phones with this unit simultaneously. G Favorite Phone : give top priority to connect to this phone. G Favorite Audio : give top priority to connect to this audio device. G Device Name : edit the device name of this unit. G PIN : edit the PIN code. Pairing Bluetooth Device Please turn Bluetooth of this unit to be on before pairing. 1 On the Bluetooth connections screen ((Fig 3-1-2) page 8), touch Add New . from your Bluetooth device.

(Default device name: MYCAR) 3 According the prompt message, please enter or confirm PIN to pairing from your Bluetooth device. 4 After successful pairing, it will return to the Bluetooth connections screen ((Fig 3-1-2) page 8) and your Bluetooth device is displayed in the paired list. Connected is displayed below the device name. And the corresponding icons and are lit. Connect , Disconnect or Delete a Paired Bluetooth Device On the Bluetooth connections screen

((Fig 3-1-2) page 8):

z Touch a paired Bluetooth device to connect or disconnect to the device. z Touch to connect or

(Fig 3-1-3) 2 Look for this units device name disconnect as a phone object.

(Fig 3-1-4) 8 z Touch to connect or disconnect as a audio object. z Touch to enter the device information screen. Phone Settings 1 In the settings screen ((Fig 2-4-1) page 6), touch Phone to enter the phone setting screen.

(Fig 3-1-5) You can check the available features of the device, including Call, Phonebook, Send Text, Receive Text, Audio Streaming. Touch Delete to delete the paired device.

(Fig 3-2-1) G Connections : enter the Bluetooth connections screen ((Fig 3-1-3) page 8). G Automatic Hold : when there is a coming call whether put the call on hold or not automatically. Adding or Editing Quick Dial 1 In the phone setting screen ((Fig 3-2-1) page 9), touch Quick Dial to enter the quick dial screen.

(Fig 3-2-2) G Delete All : delete all of the quick 2 Touch Edit to enter the quick dial dial list. list screen.

(Fig 3-2-3) G {Quick Dial List} : touch to edit or delete the quick dial list. 3 Touch Add New to enter the adding new list screen. 9 G Number : input new number as quick dial. G Type : change quick dial type including Mobile, Main, Home, Office and Other. 5 Touch OK to register the number or list as a quick dial. Phonebook Settings 1 In the phone setting screen ((Fig 3-2-1) page 9), touch Phonebook to enter the phonebook setting screen. G Sort Phonebook by : switch sorting method of phone book by first name or last name. Text Message Settings 1 In the phone setting screen

((Fig 3-2-1) page 9), touch Text Message to enter the text message setting screen.

(Fig 3-2-6) G Download Entire Phonebok : download the entire phonebook from the connecting phone manually. G Auto Downloaded : while pairing or connecting a Bluetooth device the phonebook and call history will be downloaded automatically.

(Fig 3-2-7) G Text Message : turn the text message function on or off. G Text Message Ringtone : whether there is a ringtone notification when receiving a text message. G Signature : when this function setting ON, when sending a texmessage, the text message will be added a signature Sent from XXX. XXX is the vehicle name of factory configuration.

(Fig 3-2-4) G Copy from Call History : copy from call history as a quick dial. G Copy from Phonebook : copy from phonebook as a quick dial. G Enter Number by Keypad : enter phone nuber by keypad as a quick dial. 4 After copying or inputing, it enter the quick dial register screen.

(Fig 3-2-5) G Entry # : select another quick dial as the new quick dial. G Name : change the quick name. 10 G Auto Reply : when this function setting ON, reply the pre-set fixed text message to the received new mail. Auto reply only once, do not reply if failed. G Auto Reply Text Message : you can set the fixed or customized message as the auto reply text message. G Edit Custome Text : add, edit or delete the customized message for auto replying. Notifications Settings 1 In the phone setting screen

((Fig 3-2-1) page 9), touch Notifications to enter the notificitions settings screen.

(Fig 3-2-7) G Driver Only : while setting On, when there is an incoming call or a new text message, the incoming call screen or the new text message is not displayed in this unit's displayer, and there is no ringtone notification. G Ringtone : while setting On, when there is an incoming call or a new text message, there is ringtone notification. Bluetooth Phone Operations Before operate the Bluetooth Phone you must pair the mobile phone with this unit. Refer to Pairing Bluetooth Device on Page 8. 1 Press the [

] button to enter the phone menu screen. If there is no phone connected, besides the Connections , the other keys are unavailable.

(Fig 3-3-1) Multipoint phone This unit allow you connect 2 phones with this unit simulataneously. You can view the call history, phonebook, text message and so on of the 2 connected phones. The device name will appear the corresponding screen, and you can switch the device in 11 some screens. Take Phonebook for example. While 2 phones connected, you can change the device. G Text message downloading is only valid for the phones that support text message downloaded. 1 While the Auto Downloaded Note:

G The phonebook and call history will be downloaded or updated at the same time. Make Outgoing Call There are 5 ways to make outgoing call. Phonebook and Text Message 2 Touch Yes to go to the Phonebook,

(Phonebook Settings page 10)and Text Message (Text Message Settings page 10) are set to ON, touch Phonebook , Call History or Text Message on the phone menu screen ((Fig 3-3-

1) page 11) to enter the call history, phonebook or text message screen. Call History or Text Message list screen. If the call history, phonebook and text message have already been downloaded, they will be updated. Please accept downloading when the Bluetooth phone receives a request. 3 After downloading is successful, the call history, phonebook and text message will be displayed on the screen. Download Call History, The call history, phonebook and text message of the Bluetooth phone can be downloaded to this unit. While the Auto Downloaded

(Phonebook Settings page 8)and Text Message (Text Message Settings page 10) are set to ON, when a Bluetooth phone is paired connected with this unit at first time, The call history, phonebook and text message will be downloaded automaticly. Note:

12

(Fig 3-3-2) Enter Numbers to Dial 1 In the phone menu screen

((Fig 3-3-1) page 11), Touch Dial Number to enter the Dial Number screen.

(Fig 3-3-3) 2 After finish entering the phone numbers, touch OK to make calling. Call from Phonebook 1 In the phone menu screen ((Fig 3-3-1) page 11), touch Phonebook to enter the phonebook screen .

(Fig 3-3-6) 3 Touch to select a phone number to call. Call from Call History 1 In the phone menu screen ((Fig 3-3-1) page 11), touch Call History to enter the call history screen.

(Fig 3-3-5) 2 Touch to select a call list to make 2 Touch to select a contact to display the details. outgoing call. Call from Text Message

(Fig 3-3-7) 1 Enter the text message screen

((Fig 3-3-12) page 14) 2 Touch Call to make outgoing call. Call by Quick Dial After adding quick dial list (Adding or Editing Quick Dial page 9), you can make outgoing call by quick dial. 1 In the phone menu screen(Fig 3-2-1), touch Quick Dial to enter the quick dial screen.

(Fig 3-3-9) G Edit : Touch to answer the call. 2 Touch a quick dial list to make outgoing call. Incoming call 1 The following screen will be displayed when there is an incoming call. 13 phone to hang up the call. G Mute : You may touch if you do not want other party to hear the call under special circumstances. Touch again to make the call output from the vehicle speakers. G Dial Number : Open the number pad if you need to enter PIN or code for some special calls, or if you want to make another outgoing call. G Use Handset : Touch to use your phone to answer the call. G Switch Call : When you make another outgoing call or there is another incoming during calling, touch to switch between the two calls. Reading and Text Message 1 In the phone menu screen

((Fig 3-3-1) page 11), touch Text Message to enter the Text Message screen.

(Fig 3-3-12) 2 Touch to select a text message to display the detailed text message.

(Fig 3-3-13) G Prev. : switch to the previous text G Next : switch to the next text message. message. G Call : make outgoing call. G Reply : reply the text message. Volume setting 1 In the phone menu screen ((Fig

(Fig 3-3-10) G Answer : Touch to answer the call. G Decline : Touch to decline the call. G Hold Call : Touch to put the call on hold. During a telephone call 1 The following screen is displayed during a telephone call.

(Fig 3-3-11) For 2 phones connected, the Device Name is displayed. G Hang up : Touch to hang up the 14 3-3-1) page 11), touch Volume to enter the volume setting screen.

(Fig 3-3-14) 2 Touch + or - to adjust the ringtone or outgoing call volume. Bluetooth Audio Operations This unit only supports the playing of audio files instead of images or videos. Notes:

G Before operate the Bluetooth Audio you must pair this unit with Bluetooth device which support audio file playing. G The functions of some devices may vary due to different types of devices. Select Bluetooth Audio mode 1 Touch Bluetooth Audio on the audio source screen ((Fig 2-4-1) page 6) to enter the Bluetooth Audio playback screen. and are unavailable; the support AVRCP 1.3, repeat random BT Menu is displayed as Connections , and touch it to enter the Bluetooth connections screen ((Fig 3-1-2) page 8). If the playing track has an album artwork, the upper right icon will be displayed as the track's album artwork. Track up / down 1 Touch x / v to go to the previous or next track. Fast Forward / Fast Reverse 1 Long press x / v for fast reverse or fast forward. Pause / Play 1 Touch 2 Touch to pause. to resume playing. Repeat Play 1 Touch mode. to switch the repeat play 15

(Fig 3-4-1) If connected with the device which

: play one track repeatly. connection screen ((Fig 3-1-2) page 8). G {Folder List} : enter the folder to select a track.

: play all tracks repeatly.

: repeat off. Shuffle Play 1 Touch mode. to switch the shuffle play

: play all tracks in random.

: random off. Bluetooth Menu 1 In the Bluetoothe audio playback screen, touch BT Menu to enter the Bluetooth menu screen.

(Fig 3-4-2) G Now Playing : return to the playing screen. screen. G Current List : go to the current list G Connections : go to the Bluetooth 16 artwork, the upper right icon

: play all tracks in random.

: random off. iPod Menu 1 In the iPod playback screen((Fig 4-1-1) page 17), touch iPod Menu to enter the iPod menu screen. And the category list is displayed. 4. iPod Operations This unit can play audio files stored in an iPod. You can use it as an audio device by simply copying desired audio files into it. iPod Connection Connect iPod device to USB port. When connecting iPod, this unit will read the files automatically. The track information display on the screen once playback start. iPod Mode Selection 1 Touch iPod in the audio source screen ((Fig 2-4-1) page 6) to enter the iPod playback screen.

(Fig 4-1-1) If the playing track has an album will be displayed as the track's album artwork. Track up / down 1 Touch x / v to go to the previous or next track. Fast Forward / Fast Reverse 1 Long press x / v for fast reverse or fast forward. Pause / Play 1 Touch 2 Touch to pause. to resume playing. Repeat Play 1 Touch mode. to switch the repeat play

: play one track repeatly.

: play all tracks repeatly.

: repeat off. Shuffle Play 1 Touch mode. to switch the shuffle play

{Category List}

(Fig 4-1-2) G Now Playing : return to the playing G Current List : go to the current list screen. screen. G Album Artwork : set the album artwork of the playing track is diaplayed or not in the playbak screen ((Fig 4-1-1) page 17). 17 G {Category List} : enter the category list to select a track. 18 be restricted while driving. Touch OK . 5. Using Apple CarPlay Just connect your iPhone to this unit, you can use Apple CarPlay, and the iPhone screens are displayed on the display and operated. Various functions such as destination guidance, call incoming / outgoing, text message sending / receiving, audio playback, etc. can be used. z Supported iPhones: iPhone 5 above z Supported OS: iOS 7.0 above Please use the supported iPhones, otherwise the Apple CarPlay functions will not be used abnormally. Request:

G When you use the Apple CarPlay function, iPhone communication fee will be charged. The communication fee will be borne by the subscriber of the used iPhone. G Depending on how you use it, the charge from mobile phone company may be expensive. Please check the price plan and usage of your mobile phone company in advance. Depending on usage frequency, we recommend using the optimum rate plan such as flat rate data plan. Notes:

G Apple CarPlay's operations may G If the radio wave condition of the iPhone is bad, the operations of Apple CarPlay may be restricted. G Operations such as audio playback may be restricted due to restrictions of Apple CarPlay application. G Apple CarPlay's operations may be restricted depending on the model and state of the iPhone. Starting Apple CarPlay 1 Please connect your iPhone to the units USB port with the Apple lightning cable supplied with your iPhone. The first time you connect, a prompt screen will appear.

(Fig 5-1-1) 2 Touch Yes to use Apple CarPlay.

(Fig 5-1-2) 3 Press the [

] button, it will enter the CarPlay phone screen;

19 press the [AUDIO] button, it will enter the audio souce screen ((Fig 2-4-1) page 6), and touch Apple CarPlay to enter the CarPlay music playck screen. Note:

G After starting Apple CarPlay, the Bluetooth connection with the iPhone will be disconnected. To end the Apple CarPlay Disconnect the iPhone from the USB port of this unit. 6. Using Siri 7. Using Android Auto During Bluetooth connection with iPhone, you can use iPhones voice assistant Siri. z Push and hold [VR] button on steering switch. Preparation and Connection 1 Use the Google Play store in your Android smartphone to download and install Android Auto application. 2 Connect the Android smartphone to the USB interface by the data cable supplied with Android smartphone. 3 When the connection prompt screen appears, touch [OK] to establish the connection. 20 no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:

The device must not be co-located or operating in conjunction with any other antenna or transmitter. FCC RF Radiation Exposure Statement Caution: To maintain compliance with the FCCs RF exposure guidelines, place the product at least 20cm from nearby persons. 8. Declaration of conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. NOTE:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

- Consult the dealer or an experienced radio/TV technician for help. WARNING:

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 21

LABEL NISSAN N# 2591A 9BY5A iin FC MODEL NO. PP4330 PARTNO. 3061811XXX PARTNAME CONT ASSY-AV SERIAL NO. 1234567 MANUFACTURED:SAN JUAN DE RIO} MADE IN MEXICO 20230808 3067439X01 THIS DEVICE COMPLIES WITH DHHS RULES 21 CFR CHAPTER I SUBCHAPTER J APPLICABLE AT DATE OF MANUFACTURE. FCC ID-WY2-PPA330 I19F-PP 4331 clarion LABEL

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA FCC ID: WY2-PP4330 Date of Filing to TCB: 08-01-2024 Ref: Attestation Statements Part 2.911(d)(7) Filing

[Faurecia Clarion Electronics (Xiamen) Co., Ltd.] (the applicant) certifies that, as of the date of the filing of the application, [Clarion Corporation of America] is our designated U.S. agent for service of process for the above referenced FCC ID. [Faurecia Clarion Electronics (Xiamen) Co., Ltd.] accepts to maintain an agent for no less than one year after the grantee has terminated all marketing and importation or the conclusion of any Commission-related proceeding involving the equipment and will notify the TCB/FCC in a timely manner if the US Processing Agent changes.

[Clarion Corporation of America] accepts, as of the date of the filing of the application, the obligation of the designated U.S. agent for service of process for the above referenced FCC ID. Designated U.S. Agent Information:

Name: Clarion Corporation of America FRN: 0022540678 Address: 15951 Technology Drive, Northville, MI 48168, USA Contact Person: Sattar Niyaz Tel.: 248-912-8905 Email: sattar.niyaz@forvia.com Sincerely, zeW3484E Faurecia Clarion Electronics (Xiamen) Co., Ltd. 6F, No. 40, Guanri Road, Software Park Stage II, XiamenFujianChina T +81 48 (601) 3700

(Applicant printed name)

(Applicant signature) Yang Huayu

(US Local Agent printed name) Sattar Niyaz

(US Local Agent signature) zeW3484E Faurecia Clarion Electronics (Xiamen) Co., Ltd. 6F, No. 40, Guanri Road, Software Park Stage II, XiamenFujianChina T +81 48 (601) 3700

Faurecia Clarion Electronics (Xiamen) Co., Ltd. Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046 USA Date: 2023.12.29 FCC ID: WY2-PP4330 Ref. #1: Attestation Statements Part 2.911(d)(5)(i) Filing

[Faurecia Clarion Electronics (Xiamen) Co., Ltd.] (the applicant) certifies that the equipment for which authorization is sought is not covered equipment prohibited from receiving an equipment authorization pursuant to section 2.903 of the FCC rules. Ref. #2: Attestation Statements Part 2.911(d)(5)(ii) Filing

[Faurecia Clarion Electronics (Xiamen) Co., Ltd.] (the applicant) certifies that, as of the date of the filing of the application, the applicant [ is not] identified on the Covered List as an entity producing covered equipment. Cover List Link: (https://www.fcc.gov/supplychain/coveredlist) Applicant: Faurecia Clarion Electronics (Xiamen) Co., Ltd. Address: 6F, No.40, Guanri Road, Software Park Stage II, Xiamen, China Contact Person: Huayu Yang Tel.: 86-592-2177095 Email: huayu.yang@forvia.com Sincerely, Rev 2/6/2023

One Distribution Center Circle, Suite 1 Littleton, MA 01460 Tel: +1 978 486 8880 Email: certification@bureauveritas.com Website: https://www.cps.bureauveritas.com/

Confidentiality Request Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Adding CFR 2.459 (obsolete) Updated company template & Added text box

(obsolete) Added IC confidentiality letter form (obsolete) Corrections to STC form. Added reference to KDB

(obsolete) Updated company logo (current) Updated References and Contact Info Updated BV Company Address Revision History From 1.0 1.0 2.0 3.0 4.0 5.0 6.0 7.0 To 1.0 2.0 3.0 4.0 5.0 6.0 7.0 8 Approved Date Nov-14-2006 August 11 - 2008 Jan-31-2012 March-26-2015 Nov-19-2015 Jun-26-2019 Aug-30-2020 Nov-28-2023 SCS-F019: Confidentiality Request Letter Page 1 of 2 Rev 8 Faurecia Clarion Electronics (Xiamen) Co., Ltd. 2023-12-28 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046-1609 Cc:

Bureau Veritas Consumer Products Services Inc. One Distribution Center Circle, Suite 1 Littleton, MA 01460 Subject: Confidentiality Request for FCC ID: WY2-PP4330 Pursuant to CFR 47 sections 0.457 and 0.459, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application be held confidential:

Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent i Permanent Permanent Permanent Permanent Permanent i Exhibit Block Diagram External Photos Internal Photos Operational Description/ Theory of Operation Parts List Tune-Up Procedure Schematics Test Setup Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

To avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 days; or for a specified date of not to exceed 180 days from the Grant Date The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, Clients signature:

Clients name & title: Huayu Yang / Engineer Contact information / address: 6F, No.40, Guanri Road, Software Park Stage II, Xiamen, China i Permanent confidentiality may be requested in accordance with FCC KDB 726920 SCS-F019: Confidentiality Request Letter Page 2 of 2 Rev 8

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: sales.eaw@us.bureauveritas.com FCC CLASS II PERMISSIVE CHANGE REQUEST LETTER Reason for Amendment (current / obsolete) Initial Release (obsolete) Update company logo (current) Revision History From 1.0 1.0 To 1.0 2.0 Approved Date Feb-20-2012 Jul-29-2019 SCS-F159 FCC Class II Permissive Change Request Letter Page 1 of 3 Rev 2.0 Faurecia Clarion Electronics (Xiamen) Co., Ltd. FCC Class II Permissive Change Request Letter Date: 2023-12-28 To FCC:

RE: FCC Permissive II Change Request for Company: Faurecia Clarion Electronics (Xiamen) Co., Ltd. FCC ID: WY2-PP4330 We are submitting an application for a class II permissive change to the FCC approval of the Company name:

Faurecia Clarion Electronics (Xiamen) Co., Ltd., product description: Audio Display (FCC: WY2-PP4330, Original Grant Date: 10/30/2020). The transmitter module itself has not changed. Here are the changes:

1. Add model: PP4330;

2. Changed the front housing plate;

3. Canceled the Satellite Radio function, please see as below:

old update Sincerely, Title: Engineer Name: Huayu Yang Address: 6F, No.40, Guanri Road, Software Park Stage II, Xiamen, China SCS-F159 FCC Class II Permissive Change Request Letter Page 2 of 3 Rev 2.0 Signature:

SCS-F159 FCC Class II Permissive Change Request Letter Page 3 of 3 Rev 2.0

Faurecia Clarion Electronics (Xiamen) Co., Ltd. Date: 2023.12.28 To BVCPS, Inc. 775 Montague Expressway Milpitas, CA 95035 USA RE: New Family Listing Declaration Please review the attached exhibits supporting our request for applying New Family Listing to the FCC ID: WY2-PP4330 for Grantee Code: WY2 Product Description: Audio Display Base model: PP-4330 Additional model(s): PP4330 Additional model PP4330 is identical with test model PP-4330 except the model name for trading purpose. Should you have any questions, please contact us. Sincerely, Name: Huayu Yang Title: Engineer Signature:

WIFI Channel 12 and 13 Declaration Letter Reason for Amendment Approved Date Revision History Initial Release (obsolete) Modify the select options (current) From Initial 1.0 To 1.0 2.0 December 22, 2015 September 23, 2016 SCS-F190 WiFi Channel 12&13 Declaration Letter Page 1 of 2 Rev.2.0 Created by William Graff Approved by Bao-Thuong Nguyen Faurecia Clarion Electronics (Xiamen) Co., Ltd. WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: WY2-PP4330 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Huayu Yang / Engineer Signature:

Phone: 86-592-2177095 Email: Huayu.yang@forvia.com Date: 2023-12-28 SCS-F190 WiFi Channel 12&13 Declaration Letter Page 2 of 2 Rev.2.0 Created by William Graff Approved by Bao-Thuong Nguyen

Tel: 408-526-1188 Fax: 408-526-1088 Email: sales.eaw@us.bureauveritas.com 775 Montague Expressway Milpitas, CA 95035 Project and Product Certification Representative Authorization Letter Reason for Amendment (current / obsolete) Initial Release (obsolete) Revised wording (obsolete) Updated company template (obsolete) Updated letter information (obsolete) Added FCC ID field (obsolete) Updated company name & logo (current) Revision History From 1.0 1.0 2.0 3.0 4.0 5.0 To 1.0 2.0 3.0 4.0 5.0 6.0 Approved Date Nov-14-2006 Sept25-2007 Jan-31-2012 May-23-2014 Sep-16-2014 Jun-27-2018 SCS-F18: Project and Product Certification Representative Authorization Letter Page 1 of 2 Rev 6.0 Clarion Co., Ltd. 2020/10/20 To: BVCPS, INC. 775 Montague Expressway, Milpitas, CA 95035 USA Dear Sir/Madam, Re: Product Certification Representative Authorization Letter We, _____ Clarion Co., Ltd._____ hereby authorize Bureau Veritas Consumer Product Services, Inc. to act as a Certification Body for certifying for the following project(s):

FCC ID: WY2-PP4330 Product Description: Audio Display Model: PP-4330 Sincerely, Clients signature Clients name / title : Wen Bai Contact information / address : 6F,NO.40,Guanri Road, Software Park Stage II, Xiamen, China. SCS-F18: Project and Product Certification Representative Authorization Letter Page 2 of 2 Rev 6.0

775 Montague Expressway Milpitas, CA 95035 Tel: 408-526-1188 Fax: 408-526-1088 Email: certification@bureauveritas.com Website: https://www.cps.bureauveritas.com/

Confidentiality Request Letter Revision History From Reason for Amendment (current / obsolete) Initial Release (obsolete) Adding CFR 2.459 (obsolete) Updated company template & Added text box Added IC confidentiality letter form (obsolete) Corrections to STC form. Added reference to KDB

(obsolete)

(obsolete) Updated company logo (current) Updated References and Contact Info 1.0 1.0 2.0 3.0 4.0 5.0 6.0 To 1.0 2.0 3.0 4.0 5.0 6.0 7.0 Approved Date Nov-14-2006 August 11 - 2008 Jan-31-2012 March-26-2015 Nov-19-2015 Jun-26-2019 Aug-30-2020 SCS-F019: Confidentiality Request Letter Page 1 of 3 Rev 7.0 Clarion Co., Ltd. 2020/10/20 To:

Federal Communications Commission Authorization and Evaluation Division 7435 Oakland Mills Road Columbia, MD 21046-1609 Cc:

Bureau Veritas Consumer Products Services Inc. 775 Montague Expressway Milpitas, CA 95035 Subject: Confidentiality Request for FCC ID: WY2-PP4330 Pursuant to CFR 47 sections 0.457 and 0.459, we respectfully request permanent confidential treatment of the following Exhibits accompanying this application be held confidential:

Type of Confidentiality Requested Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Short Term Permanent Permanent i Permanent Permanent Permanent Permanent Permanent i Exhibit Block Diagram External Photos Internal Photos Operational Description/ Theory of Operation Parts List Tune-Up Procedure Schematics Test Setup Photos Users Manual The above materials contain trade secrets and proprietary information not customarily released to the public. The public disclosure of these materials may be harmful to the applicant and provide unjustified benefits to its competitors. Permanent Confidentiality:

The applicant requests the exhibits listed above as permanently confidential be permanently withheld from public review due to materials that contain trade secrets and proprietary information not customarily released to the public. Short-Term Confidentiality:

To avoid premature release of sensitive information prior to marketing or release of the product to the public, the applicant requests the following documents contained in this certification application be temporarily withheld from public disclosure for an initial period of 45 or 180 The applicant understands that disclosure of this application and all accompanying documentation will not be made before the date of the Grant for this application. Sincerely, days; or for a specified date of not to exceed 180 days from the Grant Date Clients signature:

Clients name & title: Wen bai& Certificate Engineer Contact information / address: 6F,NO.40,Guanri Road, Software Park Stage II, Xiamen, China. i Permanent confidentiality may be requested in accordance with FCC KDB 726920 SCS-F019: Confidentiality Request Letter Page 2 of 3 Rev 7.0

WIFI Channel 12 and 13 Declaration Letter Reason for Amendment Approved Date Revision History Initial Release (obsolete) Modify the select options (current) December 22, 2015 September 23, 2016 From Initial 1.0 To 1.0 2.0 SCS-F190 WiFi Channel 12&13 Declaration Letter Created by William Graff Page 1 of 2 Rev.2.0 Approved by Bao-Thuong Nguyen WIFI Channel 12 and 13 Declaration Letter We declare the equipment identified below with regards to Channel 12 and 13 capabilities for FCC ID: WY2-PP4330 Declaration Product hardware does not have the capability to operate on Channel 12 and 13. Product hardware has the capability to operate on Channel 12 and 13. However, these two channels will be disabled via software and will not be accessible to user. Product hardware has the capability to operate on Channel 12 and 13. However, all the operated channels cant be changed in the RF parameter via software. All channels have complied with all of the requirements sets out in FCC Part 15.247. Product hardware has the capability to operate on WiFi Channel 12 and 13, and meets the requirements of KDB 594280 D01 v02r01. Please note:

1.) By default, this device operates in a mode that is compliant with the U.S. requirements. 2.) This device will also use supplemental information such as geo-location data to determine that it is operating outside the U.S., if necessary, to change its power. Such supplemental data will be derived from the following:

Global Navigation Satellite System (GNSS)7 sensors in the device Mobile Country Code (MCC),8 or MCC with a Mobile Network code (MNC), received from a CMRS9 carrier and received directly by a receiver on the device Country information derived from multiple adjacent access points (for example using IEEE Std 802.11d provisions) may be permitted on case-by-case basis Other suitable geo-location data based on IP addresses or other reliable source. Name / Title: Wen Bai Signature:

Phone: 86-592-2177095 Email: bai_wen@clarion.com.cn Date: 2020/10/20 SCS-F190 WiFi Channel 12&13 Declaration Letter Created by William Graff Page 2 of 2 Rev.2.0 Approved by Bao-Thuong Nguyen