Supports Clamps Optically Bonded 15" Embedded Touch PC FT15V40CAPOB Allwinner V40 Cortex A7 QuadCore Processor 1GB RAM Memory & 8GB FLASH Storage Pre-installed Android 6.0 operating system Anti-glare surface treatment (chemical etching) 10-Finger-Multi Touch Capacitive Touch Panel 1.1mm cover glass with 7H surface hardness Optically bonded Touch Panel to LCD Panel Patented IP65 front with silicon seal Integrated W-LAN module 2 year guarantee faytech's Embedded Touch PCs have a pre-installed Android 6.0 operating system and are equipped with W-LAN module. The device has IP65 water- and dust proof front panels and capacitive 10-finger multitouch. All the PCs have VESA 75 or VESA 100 screw patterns on the back, while the 13.3" to 21.5"
come with their own desktop stand included. The Embedded PC is powered by the powerful embedded V40 QuadCore mainboard, with 1G DDR3 RAM, 8GB flash memory, a SATA connector and SD card slot for further storage expansion. This device has an optically bonded touch panel, which will improve the stability, reduce the reflection, increase the viewing angle, and enhance the perceived brightness. It also provides resistance to dust particles and shows a better image in general. It is the perfect choice for a wide variety of applications, including industrial automation, control panels and digital signage. W-LAN
+60C
-10C Product name 15" Embedded Touch PC PC System Model number / EAN number Global Article Code 3030501862 European Article Code 1010501573 Release date 14/03/2019 FT15V40CAPOB / 6920734015801 Global Article Code European Article Code Release date IP Rating IP65 Front / IP40 Back LCD Panel Screen diagonal (Inch/cm) Display active screen size (cm) Aspect ratio Physical resolution 15/38.10 30.4022.80 4:3 1024768 External Maximum showable resolution - HDMI 19201080 Colours displayed Brightness (cd/m2) Contrast Typical reaction time Tr/ Tf (ms) Visual Angle horizontal/vertical () Backlight / Backlight Lifetime (hours) 16.7M 300 700:1 8/12 160/160 LED / 30,000 Operating Temperature (C) Humidity Range (RH) Net weight (kg) Gross weight (kg) Housing material Operation / Mechanical
-10 ~ +60 10% - 90%
4.10 5.10 (incl. cartonage) Rubber Front Case, Plastic Back Case Housing (mm) L W H 359.0 298.0 45.0 Cut-out for clamp supports (mm) L H 335.0 274.0 Amount of clamps required Mounting 6 VESA 100 Included in the Delivery Power Supply (see Power section) W-LAN Antenna (RP-SMA female) Short Installation Manual Standard Stand Expansion slots MiniPCIe CPU Chipset Allwinner V40 QuadCore Cortex A7 Graphic GPU ARM Mali400 Mp2 Complies with OpenGL ES 2.0/1.1 Audio Memory Storage Network OS Integrated HI-FI 100dB Audio Codec Dual analog mic, 2x6W amplifier 1GB DDR3 8GB EMMC Flash 10/100Mbit Network; W-LAN Android 6.0 Touch Panel Touch Technology Projected Capacitive 10-Point Multitouch Touch Connector USB Touch Life (Contacts) Unlimited Surface Hardness 7H Surface Treatment Anti-glare (chemical etching) Power Indicator Power Supply Working Power (V) Power Consumption (W) Stand-By Consumption (W) Power Green LED 100-240V ACDC active switching; 12V DC-Out 8~18 16
<1 Internal Connectors External Connectors 1x SD-card 1x SIM-card 2x Serial 4x TTL UART 2x USB 2.0 18/24Bit LVDS 6x GPIO 1x Line-In 1x Line-Out 1x 8-18V DC-In (screwable) 1x HDMI 2x USB 2.0 1x USB OTG 1x 10/100Mbit RJ45 Port 1x Audio-In 1x Audio-Out 1x Serial 1x RJ10 (4P4C) 1x Amplifier for 2x6W loudspeaker 1x SD-card slot 1x SATA-Port 1x RTC 1x CAN Bus 1x SIM-card slot 1x W-LAN antenna connector (RP-SMA male) 27.0 34.5 298.0 229.0 34.5 23.0 45.0 359.0 305.0 27.0 65.1 228.9 65.1 69.1 159.9 69.1 99.0 100.0 99.0 129.5 100.0 129.5 support@faytech.com contact@faytech.com www.faytech.com China: +86 755 8958 0612 Germany: +49 5542 30374 10 USA: +1 646 205 3214 India: +91 11 49707436 Japan: +070 4127 5167 Label & Location Label's content and size FCC Compliance Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and 2. This device must accept any interference received, including interference that may cause undesired operation. FCC WARNING Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This device and its antenna(s) must not be co-located or operating in conjunction with any other antenna or transmitter. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help. To maintain compliance with FCCs RF Exposure guidelines, This equipment should be installed and operated with minimum distance between 20cm the radiator your body: Use only the supplied antenna FCC ID:2AWNGFTV40CAP