BAP1200 Function Up Speed On/off Sensor l Panel figure:
Key Function:
l On/offG Start/Stop this unit system. l SpeedG Adjust air purify fan speed .Its have hiA midA lowA sleepA auto controller LCD Alarm Down Timer Clock Set functionA This key is valade when unit system on. l SetG for set timer,clock,alarm key. l TimerG
Press Timer& Set key at same time can enter timer mode and LCD will show TIMER symbol.
First setting auto off timer mode when system in on. First seting hour(it will flash) then after setting minute(it will flash).After setting auto off times hour and minute.
When press speed key system will auto cancel timer mode.
When system in off user can setting auto on time.
Hold presstime key over 2 second cancel timer mode.iw\C l ClockG
Press Clock& Set key at same time setting real time clock.
Press clock key change clock display mode. BAP1200 Function l AlarmG
Press Alarm& Set key at same time setting alarm time. And it will appear bell symbol on the LCD.
When alarm bell symbol will flash and buzzer will continue beep. User press alarm key buzzer will stop. And user need press alarm and set key at same time to cancel alarm mode and bell symbol will disappear..
Press alarm key change alarm time display mode l UpG When enter setting time it can increase time. l DowmG When enter setting time it can decrease time. l SensorG sense room brightness for control backlight.
When user press key backlight will on after 5 second backlight will auto off.
Press up&down key backlight will continue on or switch to off.
When room bright from light change to dark backlight will auto on. l PARTICLE SENSOR function. 1. PARTICLE SENSOR need place above ground 1meter. 2. Speed control table in auto mode. Low Mid Mid Mid Hi Hi Hi LED SPEED Sleep Low